# Bombardier Service Bulletin 700-32-5011

Copy: Revision 2 ("SB 700-32-5011 Rev 02"), 20 pages: PDF https://openairdocs.org/files/sha256/bc/4d/bc4df0a018742337681e1a4c25a1d400e2f940ca44ae82f0b424218c526cb0d4; text https://openairdocs.org/service-documents/bombardier/sb-700-32-5011/file/bc4df0a01874.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0710; AD 2019-03-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-32-5011
- Latest revision known: 700-32-5011, Revision 2, dated November 6, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-32-5011

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-03-22](https://openairdocs.org/ad/2019-03-22.md), effective Apr 15, 2019: Revisions 1 and 2

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-32-5011/proposed.md).

## Text (20 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2018-0710; AD 2019-03-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Jan 12/2018 700-32-5011 
 Page 1 of 1 
SERVICE BULLETIN INFORMATION SHEET 
MODEL BD-700-1A11 (BD-700) 
ATA 32-21 
LANDING GEAR 
SPECIAL CHECK/MODIFICATION — NOSE LANDING GEAR (NLG) — SAFETY 
DEVICE MODIFICATION AT RETRACTION ACTUATOR TO MAIN FITTING JOINT 
 
Service Bulletin No.: 700-32-5011 Issue: Rev 02 Dated: Nov 06/2017
The following data is supplied for information only.  No revision to the Service Bulletin 
is necessary. 
Keep this Information Sheet with subject Service Bulletin. 
This Information Sheet is issued to inform the operators that this Service Bulletin  
is no longer under a dedicated campaign as indicated in Paragraph 1.G. of the  
Service Bulletin.  If operators now wish to incorporate the Service Bulletin, they 
should contact Parts Services at 514-855-2999 or 1-866-538-1247.

### Page 2

Discard Revision 01 of this Service Bulletin dated Aug 26/2015 and the Information Sheet
dated May 17, 2016, and replace in its entirety with this Revision 02.
Service Bulletin No. 700−32−5011
Date of Basic Issue May 13/2015
Revision No. 01 Dated Aug 26/2015
Revision No. 02 Dated Nov 06/2017
For action applicable to aircraft on which the Basic Issue or Revision 01 of this
Service Bulletin was done, refer to retroactive action box on Page 1 of this Service
Bulletin.
This revision is issued to:
1. Revise, Service Bulletin Title, to delete ICA from Title.
2. Delete, in the Service Bulletin Summary Sheet, the first Note that references the ICA.
3. Revise, in the Service Bulletin Summary Sheet the A/C Serial No. row, now includes
9386 and 9401.
4. Add, before Paragraph 1. Planning Information, a retroactive action box.
5. Delete, in Paragraph 1., Note 3.
6. Add, in Paragraph 1. Planning Information, new Note 1.
7. Revise, Paragraph 1.A. the A/C Serial No., now includes 9386 and 9401.
8. Add, in Paragraph 1.D. Compliance, new Note 3.
9. Revise, in Paragraph 1.G., the part coverage deadline date.
10.Add, in Paragraph 1.G., a new statement for parts transactions.
SERVICE BULLETIN
MODEL BD−700−1A11 (BD−700)
700−32−5011
Page 1 of 2
REVISION TRANSMITTAL SHEET

### Page 3

11.Change, in Paragraph 1.K., the revision of Modification Summary 700T71052 to Rev A1.
12.Add, in Paragraph 1.K., FTER W700−32−20−01.
13.Add, in Paragraph 1.K., the Rev No. and date for M−DT−SB700−32−036.
14.Add, in Paragraph 2.A., Note 1 and Note 2.
15.Add, in Paragraph 2.B., a new step.
16.Add, in Paragraph 2.D., the Rev No. and date for M−DT−SB700−32−036.
17.Add, in Paragraph 2.F., a new Note.
18.Make miscellaneous minor changes, as necessary, with no change of context.
MODEL BD−700−1A11 (BD−700)
700−32−5011
Page 2 of 2

### Page 4

SPECIAL CHECK/MODIFICATION - NOSE LANDING GEAR (NLG) - SAFETY DEVICE
MODIFICATION AT RETRACTION ACTUATOR TO MAIN FITTING JOINT
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 9 Months from this Service Bulletin
Release Date (Basic Issue)
EFFECTIVITY: A/C Serial No. 9386, 9401 and 9445 to 9636
MANPOWER: Refer to Paragraph 1.F
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED YES NO
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: The issuance of an Airworthiness Directive (AD) to incorporate this Service Bulletin
is expected to be released by Transport Canada.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−700−1A11 (BD−700)
ATA 32−21
LANDING GEAR
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 1 of 1
This Service Bulletin is available at:

### Page 5

SPECIAL CHECK/MODIFICATION - NOSE LANDING GEAR (NLG) - SAFETY DEVICE
MODIFICATION AT RETRACTION ACTUATOR TO MAIN FITTING JOINT
RETROACTIVE ACTION
THE ACTION THAT FOLLOWS IS RECOMMENDED FOR AIRCRAFT ON WHICH
THE BASIC ISSUE, DATED 13 MAY 2015 OR REVISION 01, DATED 26 AUG 2015 OF
THIS SERVICE BULLETIN WAS DONE.
You have met the technical intent of Part B of this Service Bulletin if Conditions (A) and
(B) below are both satisfied.
Condition A: It can be confirmed that at least 25 retraction/extension cycles had been
completed on the NLG at the time of Service Bulletin incorporation.
Condition B: Neither the NLG nor the NLG retract actuator have been replaced or
modified since the time of Service Bulletin incorporation
If Conditions A and B above are satisfied, no other action is necessary. Do not sign the
logbook if you have not done this revision. Keep the previous logbook entry. You may
make an entry as “Not Applicable” for this revision.
If Condition A or B are not satisfied, proceed with incorporation of Revision 02 of this
Service Bulletin.
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−700−1A11 (BD−700)
ATA 32−21
LANDING GEAR
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2015−2017 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 1 of 14
This Service Bulletin is available at:

### Page 6

1. PLANNING INFORMATION
NOTES:1 . Before you do this bulletin, examine all STC, STA or equivalent
action changes to make sure that this bulletin can be completed.
2. The initial design of the NLG strut assy was installed with lockwire as a
safety device. This Service Bulletin is not applicable for aircraft with the
lockwire configuration.
3. This Service Bulletin is covered by a dedicated schedule. Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our In−Service Implementation Team (ISIT)
is recommended prior to a maintenance visit. Please contact your
Regional Manager (RM), Field Service Representative (FSR) or Customer
Service Representative (CSR) to schedule your aircraft as there is a
limited availability. The parts will be allocated on a first come first serve
basis.
For more information on dedicated schedules, refer to SB 700−00−5002.
4. For the life limit of the retraction actuator to main fitting joint components,
refer to Time Limit/Maintenance Checks (TLMC) manual.
5. If the Service Requests for Product Support Action (SRPSA) given in
Table 3 of Paragraph 1.A. has been incorporated on your aircraft, refer to
Paragraph 2.G., Recording.
A. Effectivity
BD−700−1A11 aircraft, Serial No. 9386, 9401 and 9445 to 9636 with the applicable
NLG configuration as listed in Table 1 and Table 2.
All aircraft, post Liebherr Service Bulletin 1285A−32−07, with the NLG configuration
equivalence per Table 1:
TABLE 1: POST SB 1285A−32−07 NLG PART NUMBER EQUIVALENCES
Bombardier
NLG Assy
Messier−Bugatti−Dowty
NLG Assy
Messier−Bugatti−Dowty
NLG Shock Strut Assy
GW311−1100−13 22100−113 22175−105
GW311−1100−15 22100−115 22175−107
GW311−1100−17 22100−117 22175−109
NOTE: On some of the aircraft post SB 1285A−32−07, the Mod−Plate was not
updated to reflect the change. These aircraft are to be checked to ensure
the Mod−Plate is updated. The applicable serial numbers are listed in
Table 4.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 2 of 14

### Page 7

All aircraft with the NLG configuration equivalence per Table 2:
TABLE 2: NLG PART NUMBER EQUIVALENCES
Bombardier
NLG Assy
Messier−Bugatti−Dowty
NLG Assy
Messier−Bugatti−Dowty
NLG Shock Strut Assy
GW311−1100−19 22100−119 22175−111
GW311−1100−21 22100−121 22175−113
The intent of this Service Bulletin was met on the aircraft that follow, with the
Service Requests for Product Support Action (SRPSA) listed in Table 3.  Refer to
Paragraph 1, Planning Information, NOTE 3:
TABLE 3
AIRCRAFT SERIAL NO. SRPSA NO.
9597, 9613, 9621, 9623, 9627, 9633,
9636
16578
All other subsequent BD−700−1A11 aircraft are scheduled for the modification in
production (Ref.:  Modification Summary 700T02560).
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
B. Reason
1. Condition:
Potential bearing loads may be induced that apply torque to the fastener that
retains the retraction actuator to main fitting joint, causing the cotter pin to
shear.
Additionally, after the incorporation of Vendor Service Bulletin 1285A−32−07 at
Liebherr during the 120 months aircraft inspection, the re−identification of the
NLG strut assy was missed on some landing gears.
2. Evidence:
Inspection of the retraction actuator to main fitting joint has revealed that some
cotter pins may be in shear mode.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 3 of 14

### Page 8

3. Objective/Benefit:
This Service Bulletin introduces an interim fix to alleviate this sheared/pinched
condition until the final design configuration is approved.  The final design
configuration will remove the current TLMC replacement interval.
The mod status on the identification plate of the strut assy is to be checked and,
if necessary, re−identified as described in PART B of this Service Bulletin.
C. Description
This Service Bulletin gives instructions in PART A to:
− Visually check the condition of the cotter pin and configuration of the bolt.
This Service Bulletin gives instructions in PART B to:
− Visually check the modification number shown on the identification plate for the
NLG strut, and
− If applicable, mark the identification plate of the NLG strut with the correct
modification number.
This Service Bulletin gives instructions in PART C to:
− Replace the attachment hardware that secures the retraction actuator to the
NLG strut.
D. Compliance
Recommended within 9 months from this Service Bulletin release date. (Basic
Issue)
NOTES: 1. The issuance of an Airworthiness Directive (AD) is expected to be
released by Transport Canada Civil Aviation (TCCA).
2. This Service Bulletin is in reference to Advisory Wire
AW700−32−0504.
3. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and to get an approved disposition to complete this
Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in
accordance with established procedures.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 4 of 14

### Page 9

F. Manpower
NOTES: 1. The man−hours given are estimates to help you schedule the tasks
given in this bulletin.  The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB 700−00−5002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3.C.).  The accumulated
curing time is not included in the labor estimates and should be
considered for planning purposes before you schedule this Service
Bulletin.
PART A: 1 man−hour is necessary to do this special check.
PART B: 1 man−hour is necessary to do this modification.
PART C: 2 man−hours are necessary to do this modification.
Bombardier Aerospace does not pay for the labor to do PART A of this Service
Bulletin.
The labor required to do PART B or PART C of this Service Bulletin is at no cost if:
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled in less than 9 months from its release date
(Basic Issue).
G. Material − Cost and Availability
No kit is necessary to do this modification.
For the part necessary to do this Service Bulletin, refer to Paragraph 3.B.
This part is available at no cost if:
− a no−charge purchase order is sent to Bombardier Aerospace before
December 31, 2016.
During or after the above free period, Smart Parts Plus does not pay for the part.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 5 of 14

### Page 10

This Service Bulletin is covered by a dedicated schedule. Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
In−Service Implementation Team (ISIT) is recommended prior to a maintenance
visit. Please contact your Regional Manager (RM), Field Service Representative
(FSR) or Customer Service Representative (CSR) to schedule your aircraft as there
is a limited availability. The parts will be allocated on a first come first serve basis.
For more information on dedicated schedules, refer to SB 700−00−5002.
For all parts transactions, Bombardier Aerospace’s current Spare Parts and
Component Repair Price Catalogue General Terms and Conditions apply. These
terms and conditions are found on the Bombardier Customer Portal at:
my.businessaircraft.bombardier.com
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
07X−10−01 G700−071001−1 Pads, Jacking
Wing/Fuselage
07X−10−04 02−1248−0112 Jack, Tripod Nose
(12 Tons (10 886 kg))
07X−10−05 02−7844−0111 Jack, Tripod Wing
(30 Tons (27 216 kg))
07X−10−06 03−5822C0000 Support  Rear Fuselage
07X−20−01 G700−072001−69 Kit  Nose Ballast Weight
20X−10−01 S4933959−501 Tag, Circuit Breaker
(Red Ring)
32X−21−04 14−6844−6000 Ground Lock Pin, NLG
FWD L/G Door
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 6 of 14

### Page 11

GSE REFERENCE NO. PART NO. DESCRIPTION
− − Wrench, Torque 217 to
261 lbf in
(24.53 to 29.49 Nm)
NOTES: 1. Refer to the Global 5000 Featuring Global Vision Flight Deck
Illustrated Tool and Equipment Manual (ITEM) to make sure that you
use the correct equipment configuration.
2. Refer to the Liability Statement in the ITEM (for the GVFD) for
acceptable GSE equivalents.
3. This list is provided for quick reference.  In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail.  Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
PART A: No change.
PART B: No change.
PART C: No change.
J. Electrical Load Data
No change.
K. References
− Bombardier Aerospace, Restriction and/or Special Instruction (RSI), C−01667,
Rev A.
− Bombardier Aerospace, Modification Summary, 700T02560, Rev. B2.
− Bombardier Aerospace, Modification Summary, 700T71052, Rev. A1.
− Functional Test Engineering Requirements (FTER), W700−32−20−01, Rev R.
− Messier−Bugatti−Dowty, Service Bulletin M−DT SB700−32−036, Rev. 02 dated
12 May 2015 (attached).
− Advisory Wire AW700−32−0504.
− Global 5000 Featuring Global Vision Flight Deck BD−700 Aircraft Maintenance
Manual (AMM), Chapters 6, 7, 24, 29 and 32.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Global 5000 Featuring Global Vision Flight Deck BD−700 Illustrated Tool and
Equipment Manual (ITEM), Chapters 7, 20 and 32.
− TCCA Airworthiness Directive pending.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 7 of 14

### Page 12

L. Other Publications Affected
− GL 5000 Featuring Global Vision Flight Deck − Time Limits/Maintenance
Checks (TLMC).
M. Equivalent Service Bulletins
− For the Global Express and Global Express XRS BD−700−1A10 aircraft, use
SB 700−32−035.
− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−32−022.
− For the Global 6000 BD−700−1A10 aircraft, use SB 700−32−6011.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global 5000
BD−700−1A11 Featuring Global Vision Flight Deck Aircraft Maintenance
Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck Aircraft
Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup
NOTES: 1. The steps in the Aircraft Setup section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access
to the work area. This recommendation is to give a safe work area
and to minimize possible damage to surrounding aircraft parts.
Alternative steps can be used at the operator’s discretion.
2. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and to get an approved disposition to complete this
Service Bulletin.
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all landing gear safety precautions. Refer to AMM 32−00−00−910−801.
(3) Obey all hydraulic safety precautions. Refer to AMM 29−00−00−910−801.
(4) Obey the hydraulic technical precautions. Refer to AMM 29−00−00−910−802.
(5) Set the circuit breakers that follow to LOCKED. Refer to
AMM 24−00−00−863−801:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
LDG GEAR NOSE STEER PWR 1 DC 1
LDG GEAR NOSE STEER PWR 2 DC 2
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 8 of 14

### Page 13

SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
LDG GEAR GEAR CTL A PWR 1 DC 1
LDG GEAR GEAR CTL A PWR 2 BATT
LDG GEAR GEAR CTL B PWR 1 DC 2
LDG GEAR GEAR CTL B PWR 2 BATT
HYD HYD PUMP 3A AC 4
HYD HYD PUMP 3B AC 1
(6) Open the nose landing gear doors. Refer to AMM 32−00−00−010−801.
B. PART A − Visual Inspection of the Bolt that Secures the Retraction Actuator
to the NLG Strut
NOTE: For aircraft serial number 9597, 9613, 9621, 9623, 9627, 9633 and 9636
with Mod Plate identification "L−1285−CMD−0005", you have met the
technical intent of this Service Bulletin. Go to Paragraph 2.E.(2) then
continue with Paragraph 2.F., Close−out.
(1) The Retraction Actuator to the NLG Strut Joint must have a minimum of 25
retraction/extension cycles since installation. Use the airplane maintenance
records to determine the number of retraction/extension cycles accumulated on
the NLG. If the joint has less than 25 , perform additional retraction/extension
cycles of the NLG in accordance with AMM 32−30−00−710−801 “Operational
test of the Extension/Retraction System” to reach a minimum of 25 cycles
since installation.
(2) Visually check the condition of the cotter pin. Refer to Figure 1.
NOTE: Refer to SPM Chapter 20, "Fastening Hardware and Safetying
Devices" for the correct installation of cotter pins.
(a) For configurations GW311−1100−13, −15 and −17, if the cotter pin is not
damaged, do PART B of this Service Bulletin.
(b) For configurations GW311−1100−19 and −21, if the cotter pin is not
damaged, go to Paragraph 2.E.(2) then continue with Paragraph 2.F.,
Close−out.
(c) For all configurations, if the cotter pin is damaged, do PART C of this
Service Bulletin.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 9 of 14

### Page 14

NAS6605D44
1285−0041
1285−0008
1285−0045
MS17825−5
MS24665−136
 22400−103
 22407−1
exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
GSB3332_001
NAS1149C0563R or
NAS1149C0532R or
NAS1149C0516R
NAS1149C0563R or
NAS1149C0532R or
NAS1149C0516R
Figure 1
NLG Retraction Actuator
C. PART B − NLG Strut Identification Plate Modification Number Check
(1) For NLG part number GW311−1100−13, −15 and −17 with the following serial
number, visually check the identification plate on the NLG strut to see if the
Mod−Plate marking is "12" or "1285MOD0012". Refer to Figure 2 and to
Table 4 below for serial numbers to be checked.
TABLE 4: PART NUMBER GW311-1100-13, -15 AND -17 SERIAL
NUMBERS
00115 00170 00188 00200 00209 00219 00232
00117 00174 00190 00201 00210 00220 00233
00125 00177 00193 00202 00212 00222 00235
00131 00182 00196 00204 00214 00224 00242
00134 00184 00197 00205 00216 00226 00252
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 10 of 14

### Page 15

TABLE 4: PART NUMBER GW311-1100-13, -15 AND -17 SERIAL
NUMBERS
00160 00187 00198 00207 00217 00227 −
(a) If the Mod−Plate marking is "12" or "1285MOD0012", then you have met
the intent of this Service Bulletin, go to Paragraph 2.E.(2) then continue
with Paragraph 2.F., Close−out.
(b) If the Mod−Plate marking is not "12" or "1285MOD0012", identify the plate
as "1285MOD0012".  Refer to SPM Chapter 20, "Identification of Parts
and Assemblies".
(2) Go to Paragraph 2.E.(2) then continue with Paragraph 2.F., Close−out.
IDENTIFICATION
PLATE
exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
GSB3233_001
Figure 2
Identification Plate Location
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 11 of 14

### Page 16

D. PART C − Installation of the New Attachment Hardware Securing the
Retraction Actuator to NLG Strut
NOTES: 1. Chapter 5 Task No. 32−33−01−111* of the GL 5000 GVFD Time
Limits/Maintenance Checks (TLMC), Part 2 must be updated
accordingly if any change is made to Paragraph 2.D. of this Service
Bulletin.
2. It is assumed that the equipment has been put in a maintenance
status. The man−hour estimates do not include time for preparation,
close−out or administrative functions.
(1) Refer to Messier−Bugatti−Dowty Service Bulletin M−DT SB700−32−036, Rev.
02 dated 12 May 2015.
(2) Revise the Transport Canada approved maintenance schedule by
incorporating Chapter 5 Task No. 32−33−01−111* to the GL 5000 GVFD Time
Limits/Maintenance Checks (TLMC), Part 2.
E. Testing
(1) Lift the complete aircraft with jacks. Refer to AMM 07−10−01−581−801.
(2) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to IN.  Refer to AMM 24−00−00−863−802.
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
LDG GEAR NOSE STEER PWR 1 DC 1
LDG GEAR NOSE STEER PWR 2 DC 2
LDG GEAR GEAR CTL A PWR 1 DC 1
LDG GEAR GEAR CTL A PWR 2 BATT
LDG GEAR GEAR CTL B PWR 1 DC 2
LDG GEAR GEAR CTL B PWR 2 BATT
HYD HYD PUMP 3A AC 4
HYD HYD PUMP 3B AC 1
(3) Connect and energize external ac power.  Refer to AMM 24−41−00−861−801.
(4) Do the operational test of the extension and retraction system.  Refer to
AMM 32−30−00−710−801.
(5) Remove the external ac power.  Refer to AMM 24−41−00−861−802.
(6) Lower the complete aircraft.  Refer to AMM 07−10−01−586−801.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 12 of 14

### Page 17

F. Close−out
NOTE: The steps in the Close−out section of this Service Bulletin, except for the
return−to−service tests, are recommended steps. The steps give a
recommendation to install components removed during the Aircraft Setup.
This recommendation is to make sure that the aircraft is safe and ready to
return to service. Alternative steps can be used at the operator’s
discretion.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Close the nose landing gear doors.  Refer to AMM 32−00−00−410−801.
G. Recording
When this Service Bulletin is completed, make an entry in the aircraft log, indicating
whether PART A, PART A and PART B, PART A and PART C or PART C were
completed, and send the attached Incorporation Notice to Bombardier Business
Aircraft Customer Services (BBACS).
If the SRPSA given in Table 3 of Paragraph 1.A. have been incorporated on your
aircraft, you have met the technical intent of this Service Bulletin. You must update
the aircraft logbook to state that you comply with Service Bulletin 700−32−5011
PART C. Send the attached Incorporation Notice to Bombardier Business Aircraft
Customer Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback.  Please take a moment to fill out our easy on−line
Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
No kits required.
B. Parts
The part that follows is necessary to do PART C of this Service Bulletin and is
available from Bombardier Aerospace Parts Services, Montreal:
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 13 of 14

### Page 18

NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
DMK376−101 1 Messier−Bugatti−
Dowty Kit
− −
NOTE: The part number for the item listed above is subject to change without
revision to this Service Bulletin.  In case of discrepancy between this list
and any other list, the Illustrated Parts Catalog prevails and shall be used
to determine the latest part number.
C. Material
No consumables are required.
D. Publications
The publication that follows is required after this Service Bulletin has been
incorporated.
− GL 5000 Featuring Global Vision Flight Deck − Time Limits/Maintenance
Checks (TLMC).
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 13/2015
Revision 02: Nov 06/2017
700−32−5011
Page 14 of 14

### Page 19

700−32−5011 Rev. 02 Nov 06/2017
SPECIAL CHECK/MODIFICATION − NOSE LANDING GEAR (NLG) −
SAFETY DEVICE MODIFICATION AT RETRACTION ACTUATOR TO MAIN
FITTING JOINT
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 20

SERVICE BULLETIN INCORPORATION SHEET − "700−32−5011"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier. If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
700−32−5011 02
COMPLIED WITH
YES    NO    N/A
PART A
PART B
PART C
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
