# Bombardier Service Bulletin 700-32-5016

Copy: Revision 01 ("SB 700-32-5016_R01"), 21 pages: PDF https://openairdocs.org/files/sha256/be/58/be58d2705462b886ac7b710709db5bcaa238fa0086a9d4e29a923a6728dbe2b2; text https://openairdocs.org/service-documents/bombardier/sb-700-32-5016/file/be58d2705462.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0100; AD 2020-03-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-32-5016
- Latest revision known: 700-32-5016, Revision 01, dated November 27, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-32-5016

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2020-03-21](https://openairdocs.org/ad/2020-03-21.md), effective Mar 12, 2020: Revision 01

## Text (21 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0100; AD 2020-03-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Basic Issue of this Service Bulletin dated May 03/2019 and replace in its
entirety with this Revision 01.
Service Bulletin No. 700−32−5016
Date of Basic Issue May 03/2019
Revision No. 01 Dated Nov 27/2019
This revision has no effect for aircraft on which the Basic Issue of this Service
Bulletin was done thus no other action is necessary. Do not sign the log book if you
have not done this revision. Keep the previous log book entry. You may make an
entry as "Not Applicable" for this revision.
This revision is issued to:
1. Revise In the Service Bulletin Summary Sheet and Paragraph 1.K., To add the
Airworthiness Directive number.
2. Revise, in Paragraph 1.D., the Compliance time in Part A to three months.
3. Add, in Paragraph 1.G., the Dedicated Schedule statement.
4. Revise, in Paragraph 1.G., the special check statement.
5. Add, in Paragraph 1.G., a coverage statement.
6. Revise, in Paragraph 2.B Steps (1) and (2), to add a check by inspection statement.
7. Revise, in Paragraph 2.I., the feedback statement as per latest template.
8. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL BD−700−1A11 (BD−700)
700−32−5016
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

SPECIAL CHECK - MAIN LANDING GEAR -
TRAILING ARM ASSEMBLY INSPECTION OF THE PAINT IN THE AXLE BORE
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
See Paragraph 1.D. for Details
EFFECTIVITY: A/C Serial No. 9386, 9401, 9445 to 9997
MANPOWER: Refer to Paragraph 1.F.
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS NOYES
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This Service Bulletin is subject to Airworthiness Directive TCCA−AD CF−2019−33,
which will make it necessary to implement this Service Bulletin.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
my.businessaircraft.bombardier.com
MODEL BD−700−1A11 (BD−700)
ATA 32−11
LANDING GEAR
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 1 of 1
This Service Bulletin is available at:

### Page 3

SPECIAL CHECK - MAIN LANDING GEAR -
TRAILING ARM ASSEMBLY INSPECTION OF THE PAINT IN THE AXLE BORE
1. PLANNING INFORMATION
NOTES:1 . Before you do this Service Bulletin, examine all STC, STA or
equivalent action changes to make sure that this Service Bulletin can
be completed.
2. This Service Bulletin is covered by a dedicated schedule.  Dedicated
schedules are used to reserve and manage inventory due to limited
availability of rotable stock, parts and/or kits. Parts are limited, therefore,
advance part scheduling with our InService Implementation Team (ISIT) is
recommended prior to a maintenance visit.  Please contact your Regional
Manager (RM), Field Service Representative (FSR) or Customer Service
Representative (CSR) to schedule your aircraft as there is a limited
availability. The parts will be allocated on a first come first serve basis.
For more information on dedicated schedules, refer to Service Bulletin
700−00−5002.
A. Effectivity
BD−700−1A11 aircraft, Serial No. 9386, 9401, 9445 to 9997 that have a Trailing
Arm assembly, Part No. 21410−107, installed.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
SERVICE BULLETIN
my.businessaircraft.bombardier.com
MODEL BD−700−1A11 (BD−700)
ATA 32−11
LANDING GEAR
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2019 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 1 of 12
This Service Bulletin is available at:

### Page 4

B. Reason
1. Condition:
There may be reduced adhesion of paint in the axle bore of the trailing arm
assemblies, which may potentially lead to corrosion.
2. Evidence:
Four trailing arm assemblies were found with compromised paint finish and/or
corrosion in the axle bores requiring removal and rework.
3. Objective/Benefit:
− Inspection will identify if the paint adhesion is affected for the listed trailing
arm assemblies.
− If reduced adhesion or corrosion is found, completion of the Service Bulletin
will address that.
C. Description
This Service Bulletin gives instructions to:
− Inspect aircraft for installation of trailing arms listed on Table 1 in Appendix 4.
(This is Part A of the Service Bulletin).
− Inspect the affected trailing arm axle bores for paint adhesion. (This is Part B of
the Service Bulletin).
− If the trailing arm is not serviceable, (that is if there were findings in Paragraph
2.C.(1)(a)), the trailing arm is repaired or replaced. The Service Bulletin provides
the action to be taken.
− When a serviceable trailing arm (that is if there were no findings in Paragraph
2.C.(1)(a) is in place, the aircraft is returned to service.
− Do a second inspection on each affected trailing arm installed on the aircraft
that is not marked per Paragraph 2.H. of the Service Bulletin. (i.e. ink mark
beside trailing arm part number and modification plate does not show
“SB700−32−041ABC”) after completing Part B of the Service Bulletin. (This is
Part C of the Service Bulletin).
− Do a primer and paint removal and re−application on affected trailing arms
installed on aircraft that are not marked per Paragraph 2.H. of the Service
Bulletin (i.e. ink mark beside trailing arm part number and modification plate
does not show “SB700−32−041ABC”) after completing Part B and C of the
Service Bulletin. (This is Part D of the Service Bulletin).
D. Compliance
Part A (Inspection of Part Number and Serial Number ) − Recommended to be
performed in less than three months from the Revision 01 release date of this
Service Bulletin.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 2 of 12

### Page 5

Part B (First Inspection) − Recommended to be performed on each affected trailing
arm assembly before dates listed on Table 1 in Appendix 4.
NOTE: If the Service Bulletin implemented prior to the scheduled date of Section
1 Planning Information, then there is a risk for AOG.
Part C (Second Inspection) − Recommended to be performed within 27 to 33
months after the first inspection. This second inspection is required on each
affected trailing arm installed on the aircraft that is not marked per Paragraph 2.H.
of the Service Bulletin (i.e. ink mark beside trailing arm part number and
modification plate does not show “SB700−32−041ABC”) after completing Part B of
this Service Bulletin.
Part D (Primer and Paint Replacement) − Recommended in less than 120 months
of trailing arm assembly entry into service. This task may be aligned with 120M
TLMC task DETAILED INSPECTION OF THE TRAILING ARM/AXLE ASSEMBLY
(Chapter 5 Task No. 32−10−00−208). This inspection is required on aircraft that are
not marked per Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside trailing
arm part number and modification plate does not show “SB700−32−041ABC”) after
completing Part B and C of this Service Bulletin.
NOTE: If it is not possible to complete all the instructions in this Service Bulletin
because of the aircraft configuration, submit an SRPSA for analysis and to
get an approved disposition to complete this Service Bulletin.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA
under the Canada/EU bilateral Aviation Safety Agreement.
F. Manpower
NOTES: 1. The man−hours given are to help you schedule the tasks given in this
bulletin. The man−hours are for direct labor performed by an
experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower, refer to SB
700−00−5002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the man−hours and should be considered for
planning purposes before you schedule this Service Bulletin.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 3 of 12

### Page 6

0.25 man−hours per trailing arm assembly is necessary to do PART A of this
Service Bulletin.
Bombardier Aerospace does not pay for the labor to do PART A of this Service
Bulletin.
3 man−hours per trailing arm assembly are necessary to do PART B and PART C
of this Service Bulletin.
The labor required to do PART B and PART C of this Service Bulletin is at no cost
if:
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled according to Paragraph 1.D.
G. Material − Cost and Availability
This Service Bulletin is covered by a dedicated schedule.  Dedicated schedules are
used to reserve and manage inventory due to limited availability of rotable stock,
parts and/or kits. Parts are limited, therefore, advance part scheduling with our
InService Implementation Team (ISIT) is recommended prior to a maintenance
visit.  Please contact your Regional Manager (RM), Field Service Representative
(FSR) or Customer Service Representative (CSR) to schedule your aircraft as there
is a limited availability. The parts will be allocated on a first come first serve basis.
No kits or parts are necessary to do this special check. If corrosion is found, a
replacement trailing arm, Part No. 21410−107, needs to be ordered. The exchange
is Free of Charge (FOC).
If the trailing arm does not show signs of corrosion but paint bubbling or visible
primer is spotted, then a repair might be necessary. The repair is covered FOC.
Smart Parts does not cover any parts ordered for this Service Bulletin at any time.
H. Tooling
The equipment and tools listed below are necessary to do this Service Bulletin:
GSE REFERENCE NO. PART NO. DESCRIPTION
Commercially Available − Boroscope
I. Weight and Balance
No change.
J. Electrical Load Data
No change.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 4 of 12

### Page 7

K. References
− Airworthiness Directive TCCA−AD CF−2019−33.
− Global 5000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 24,
and 32.
− SAFRAN Landing Systems, Service Bulletin 700−32−041
− SAFRAN Landing Systems, Component Maintenance Manual (CMM),
Chapter 32.
− Bombardier Aerospace, Service Bulletin 700−32−5016, Appendix 1 (attached).
− Bombardier Aerospace, Service Bulletin 700−32−5016, Appendix 2 (attached).
− Bombardier Aerospace, Service Bulletin 700−32−5016, Appendix 3 − Examples
of bubbling paint and corrosion.
− Bombardier Aerospace, Service Bulletin 700−32−5016, Appendix 4 − List of
affected trailing arm serial numbers and due dates for first inspection.
L. Other Publications Affected
None.
M. Equivalent Service Bulletin
− For the Global Express and Global Express XRS BD−700−1A10 aircraft, use
Service Bulletin 700−32−039.
− For the Global 5000 BD−700−1A11 aircraft, use Service Bulletin
700−1A11−32−026.
− For the Global 6000 BD−700−1A10 aircraft, use Service Bulletin 700−32−6016.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global 5000
BD−700−1A11 aircraft Featuring Global Vision Flight Deck, Aircraft
Maintenance Manual (AMM) unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
Global 5000 BD−700−1A11 aircraft Featuring Global Vision Flight Deck,
Aircraft Maintenance Manual (AMM), Chapter 6.
A. Aircraft Setup
NOTE: The steps in the Aircraft Set−Up section of this Service Bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator discretion.
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey the landing−gear safety precautions. Refer to AMM 32−00−00−910−801.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 5 of 12

### Page 8

B. PART A − Inspection of Part Number and Serial Number
NOTES: 1. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and to get an approved disposition to complete this
Service Bulletin.
2. The complete area of the trailing arm axle ID shall be inspected,
including the central cavity around the wheel speed transducer
harnesses.
(1) Inspect the RH and LH trailing arm assemblies to see if Part No. 21410−107 is
installed. Part number may also be checked by inspection of aircraft records.
(2) If Part No. 21410−107 is installed, inspect the Serial No. stamped on the RH
and LH trailing arm assemblies. Serial number may also be checked by
inspection of aircraft records.
(3) If the serial numbers of the RH and LH trailing arm assemblies are not listed on
Table 1 in Appendix 4, no further action is required. Make an entry in the
aircraft log book that PART A is accomplished and the axle bore inspection is
not required. Continue at to Paragraph 2.I.
(4) If the serial numbers of the RH and/or LH trailing arm assemblies are listed on
Table 1 in Appendix 4, further action is required. Make an entry in the aircraft
log book that PART A is accomplished and affected trailing arm(s) are installed
and require inspection. Record affected serial numbers that are installed and
side(s) affected (i.e. LH, RH, or both sides affected). Schedule first inspection
(Part B) per compliance time stated in Paragraph 1.D. and continue to
Paragraph 2.I.
C. PART B − First Inspection
(1) If trailing arms with affected Part No. and Serial No. are installed on the
aircraft, remove the inboard and outboard wheel speed transducers (per AMM
32−43−53−000−801) on affected trailing arm assemblies to gain access and
perform the following:
(a) Do visual and borescope inspections of the axle bores on each affected
trailing arm assembly for the following. Refer to Figure A, in Appendix 3.
(i) Paint that is bubbling, loose, flaking, cracked, damaged or missing,
(ii) Visible primer and/or metallic−ceramic coating,
(iii) Signs of corrosion.
(b) If inspection findings are per paragraph 2.C.(1)(a)(iii), the corroded trailing
arm assembly(s) needs to be replaced.
(i) Fill in the form at Appendix 1 for each corroded trailing arm assembly.
(ii) Send the form(s) to the Retrofit Team at
retrofit.tor.sls@safrangroup.com.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 6 of 12

### Page 9

(iii) Remove the corroded trailing arm assembly(s). Refer to
AMM 32−11−09−000−801.
(iv) Install the new or reworked trailing arm assembly(s) on RH and LH
sides where corroded trailing arm assembly(s) were removed in
Paragraph 2.C.(1)(b)(iii). Refer to AMM 32−11−09−400−801.
NOTE: If received trailing arm serial numbers are listed on Table 1
in Appendix 4 then verify it has been marked per Paragraph
2.H. of this Service Bulletin, indicating that it has been
repaired.
(c) If inspection findings are as per paragraph 2.C.(1)(a)(i) or (ii), fill form in
Appendix 2 for each affected trailing arm assembly and send to
technical.concession.tor.sls@safrangroup.com with photographs of
discrepancies. Photos to show locations and severity of surface finish
discrepancies. Refer to VSB SL700−32−07 for details on how to submit a
concession. The completion of the concession process will correct the
findings. Comply with the concession on each affected trailing arm
assembly.
(d) If all affected trailing arm assemblies are serviceable (that is if there were
no findings in paragraph 2.C.(1)(a)), make an entry in the aircraft log book
that Part B is accomplished.
(e) Once all affected trailing arm assemblies have accomplished Paragraph
2.C.(1)(b), Paragraph 2.C.(1)(c), and Paragraph 2.C.(1)(d), as applicable,
make an aircraft log entry that PART B is accomplished, send
Incorporation Notice to Bombardier Business Aircraft Customer Services
(BBACS), then continue at Paragraph 2.F.
D. PART C − Second Inspection
NOTES: 1. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and to get an approved disposition to complete this
Service Bulletin.
2. The complete area of the axle ID shall be inspected, including the
central cavity around the wheel speed transducer harnesses.
(1) For any affected trailing arm installed on the aircraft that are not marked per
Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside trailing arm part
number and modification plate does not show “SB700−32−041ABC”) after
completing Part B of the Service Bulletin, perform a second repeat inspection
(per Paragraph 2.C.) on those units, within 27 to 33 months after the first
inspection.
(2) Once all affected trailing arm assemblies have accomplished Paragraph
2.D.(1), make an entry in the aircraft log book that Part C is accomplished,
send Incorporation Notice to Bombardier Business Aircraft Customer Services
(BBACS), and then proceed to Paragraph 2.F.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 7 of 12

### Page 10

E. PART D − Primer and Paint Replacement
NOTES: 1. If it is not possible to complete all the instructions in this Service
Bulletin because of the configuration of the aircraft, submit an SRPSA
for analysis and to get an approved disposition to complete this
Service Bulletin.
2. The complete area of the axle ID shall be inspected, including the
central cavity around the wheel speed transducer harnesses.
(1) For any affected trailing arm installed on the aircraft that are not marked per
Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside trailing arm part
number and modification plate does not show “SB700−32−041ABC”) after
completing Part C of the Service Bulletin, then perform the following in less
than 120 months of trailing arm assembly entry into service on those units.
This task may be aligned with 120M TLMC task DETAILED INSPECTION OF
THE TRAILING ARM/AXLE ASSEMBLY (Ref. Chapter 5 Task No.
32−10−00−208).
(a) Remove the affected trailing arm assembly(s). Refer to
AMM 32−11−09−000−801.
(b) Refer to paragraph 7.G. of the REPAIR section of the CMM 32−10−11
(Repair − General Repairs). Remove the paint and the primer from the
inner diameter of the axle on the affected trailing arm assembly.
(c) Refer to paragraph 7.G. of the REPAIR section of the CMM 32−10−11
(Repair − General Repairs). Inspect the metallic−ceramic coating on the
inner diameter of the axle on the affected trailing arm assembly. If coating
is acceptable, continue to the next step, otherwise repair the
metallic−ceramic coating per paragraph 7.G. of the CMM before
continuing to the next step.
(d) Refer to paragraph 7.G. of the REPAIR section of the CMM 32−10−11
(Repair − General Repairs). Prepare inner diameter of the axle on the
affected trailing arm assembly for primer and paint application.
(e) Refer to paragraph 7.G. of the REPAIR section of the CMM 32−10−11
(Repair − General Repairs). Apply primer and paint on the inner diameter
of the axle on the affected trailing arm assembly.
(f) Refer to paragraph 7.G. of the REPAIR section of the CMM 32−10−11
(Repair − General Repairs). Apply corrosion preventive compound on the
inner diameter of the axle on the affected trailing arm assembly.
(g) Install the affected trailing arm assembly(s). Refer to
AMM 32−11−09−400−801.
(2) After all affected trailing arm assemblies have been reworked per Paragraph
2.E. (1), make an entry in the aircraft log book that Part D is accomplished and
send Incorporation Notice to Bombardier Business Aircraft Customer Services
(BBACS).
(3) Proceed to Paragraph 2.F.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 8 of 12

### Page 11

F. Close−out
NOTES: 1. The steps in the Close−out section of this Service Bulletin, except for
the return−to−service tests, are recommended steps. The steps give
a recommendation to install components removed during the Aircraft
Setup. This recommendation is to make sure that the aircraft is safe
and ready to return to service. Alternative steps can be used at the
operator discretion.
2. The steps below in the Close−out section are per affected trailing arm
assembly.
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install any inboard and outboard wheel speed transducers that were removed
in order to perform the Service Bulletin inspection. Refer to AMM
32−43−53−400−801.
(3) If this was the first inspection of the trailing arm assembly for this Service
Bulletin, plan a second inspection (Part C of this Service Bulletin) for each
affected trailing arm assembly installed on the aircraft that is not marked per
Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside trailing arm part
number and modification plate does not show “SB700−32−041ABC”) in
accordance with Paragraph 1.D., and continue to identification in accordance
with Paragraph 2.G.
(4) If this was the second inspection of the trailing arm assembly for this Service
Bulletin, plan a primer and paint removal and re−application (Part D of this
Service Bulletin) on affected trailing arm assemblies installed on aircraft that
are not marked per Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside
trailing arm part number and modification plate does not show
“SB700−32−041ABC”) in accordance with Paragraph 1.D. and continue to
identification in accordance with Paragraph 2.G.
(5) If this was the Replacement of the Paint and Primer in accordance with
Paragraph 2.E., then continue to identification in accordance with Paragraph
2.H.
(6) If the trailing arm assembly was repaired by concession for this Service
Bulletin, the concession will have the necessary instructions for identification in
accordance with Paragraph 2.G. or 2.H., whichever applicable.
(7) This Service Bulletin is applicable to the aircraft and to be accomplished on
each affected gear. The intent of the Service Bulletin is fulfilled only when all
affected trailing arms have been replaced by unaffected trailing arms on the
aircraft or all affected trailing arms installed on the aircraft are marked per
Paragraph 2.H. of the Service Bulletin (i.e. ink mark beside trailing arm part
number and modification plate shows “SB700−32−041ABC”). If intent of
Service Bulletin is fulfilled, proceed to Paragraph 2.I. and make an aircraft log
entry and send Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 9 of 12

### Page 12

G. Identification (After First or Second Inspection)
NOTE: Identification by customer is only needed on units that are deemed
serviceable after performing the applicable inspection. In the cases where
the unit after inspection is deemed not serviceable, the replacement unit
will be marked correctly at supplier facility already prior to shipment to
customer.In the cases where the inspected unit is managed by
concession, the unit will be marked correctly during the concession.
(1) Identify each affected unit after the first inspection is completed and the trailing
arm assembly(s) is serviceable as follows.
(a) Ink mark SB700−32−041A on the trailing arm assembly near the part
number. Refer to Figure B, SAFRAN Service Bulletin 700−32−041 and
PCS−6000 Method 07.
(b) Ink mark SB700−32−041A in the next available space on the modification
plate. Refer to Figure C, SAFRAN Service Bulletin 700−32−041 and
PCS−6000 Method 07.
(2) Add to the identification of each affected unit after the second inspection is
completed and the trailing arm assembly(s) is serviceable as follows.
(a) Ink mark SB700−32−041AB on the trailing arm assembly near the part
number. Refer to Figure B, SAFRAN Service Bulletin 700−32−041 and
PCS−6000 Method 07.
(b) Ink mark SB700−32−041AB in the next available space on the
modification plate. Refer to Figure C, SAFRAN Service Bulletin
700−32−041 and PCS−6000 Method 07.
H. Identification (After re−applying the primer and paint on the trailing arm
axle’s inner diameter per Part D of this Service Bulletin)
(1) Add to the identification of each affected unit after axle inner diameter primer
and paint is reapplied per paragraph 2.E. and the trailing arm assembly(s) is
serviceable as follows.
(a) Ink mark SB700−32−041ABC on the trailing arm assembly near the part
number. Refer to Figure B, SAFRAN Service Bulletin 700−32−041 and
PCS−6000 Method 07.
(b) Ink mark SB700−32−041ABC in the next available space on the
modification plate. Refer to Figure C, SAFRAN Service Bulletin
700−32−041 and PCS−6000 Method 07.
NOTE: Identification of all affected trailing arm assemblies installed on
aircraft per 2.H.(1) indicates completion of Service Bulletin and
intent of Service Bulletin met. Proceed to Paragraph 2.I. and
make an aircraft log entry and send an Incorporation Notice to
Bombardier Business Aircraft Customer Services (BBACS).
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 10 of 12

### Page 13

I. Recording
You can do each PART of this Service Bulletin independently. When any PART of
this Service Bulletin is completed, make an entry in the aircraft log and send the
attached Incorporation Notice to Bombardier Business Aircraft Customer Services
(BBACS).
NOTE: A PART is considered complete when all affected trailing arms installed on
aircraft have completed that PART.
For information, correction(s), comments(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin
Group at the following email address:
bbad_SBgroup@aero.bombardier.com
3. MATERIAL INFORMATION
A. Kits
No kits required.
B. Parts
No parts required.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay
for these consumables.
DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Compound,
Corrosion
Inhibitor
Cor−Ban 27L − As Necessary Code: A
Compound,
Corrosion
Inhibitor
Molykote 111 − As Necessary Code: A
Compound,
Corrosion
Inhibitor
Molykote DX − As Necessary Code: A
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 11 of 12

### Page 14

DESCRIPTION PARTNO./NAME SPECIFICATION QUANTITY
SUPPLIER
(SEE
NOTE)
Compound,
Seal and Coat −
MIL−PRF−81733
Type II, Class 1,
Grade A Pro
Seal 870 CL B
As Necessary Code: A
Lockwire MS20995C32 CRES 0.032 in(0.81 mm) As Necessary Code: A
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Commercially Available
D. Publications
None.
MODEL BD−700−1A11 (BD−700)
Basic Issue: May 03/2019
Revision 01: Nov 27/2019
700−32−5016
Page 12 of 12

### Page 15

700−32−5016 Rev. 01 Nov 27/2019
SPECIAL CHECK − MAIN LANDING GEAR −
TRAILING ARM ASSEMBLY INSPECTION OF THE PAINT IN THE AXLE
BORE
bbad_SBgroup@aero.bombardier.com
NOTE: Please use Salesforce only for troubleshooting issues or when Engineering
deviation is necessary to accomplish the Service Bulletin modification.
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:
For any information, correction(s), comment(s) and/or feedback regarding Service
Bulletins released on the Customer Portal, please contact the Service Bulletin Group
at the following email address:

### Page 16

SERVICE BULLETIN INCORPORATION SHEET − "700−32−5016"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If you’re reporting Service Bulletin (SB) Incorporations to CAMP, sending
this Incorporation Sheet to Bombardier is not mandatory. If your aircraft is
on another tracking system, please contact Bombardier to make arrangements
for automated data submission.
700−32−5016 01
COMPLIED WITH
YES    NO    N/A
PART A
PART B
PART C
PART D
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
(Mandatory if N/A)
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
4. Fill in ’Remark/Reason’ to explain compliance method when N/A is selected.(E.g. Part
not installed, N/A by effectivity, N/A by Part Serial Number, etc.
5. PCW means ’Previously Complied With’.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

### Page 17

APPENDIX 1
Apr 30/2019 700-32-5016Page 1 of 1
IN CASE CORROSION IS OBSERVED FILL IN THE FORM AND SEND TO:
retrofit .tor.sls@safrangroup.com
NOTE: REPLACEMENT TRAILING ARMS WILL NOT BE DISPATCHED FREE OF
                 CHARGE WITHOUT THIS FORM BEING COMPLETED IN FULL AND \
            PROVIDED TO SAFRAN LANDING SYSTEMS.
PART NUMBER: 21410-107 PART SERIAL NUMBER:  ______________
AC SERIAL NUMBER: __________ DATE OF INSPECTION:  _______________
REPLACEMENT TRAILING ARM NEEDED BY DATE: _________________
DESCRIPTION OF DISCREPANCIES: ________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_____
ATTACH PHOTOS SHOWING AREAS AFFECTED BY CORROSION
REMOVED TRAILING ARMS TO BE RETURNED TO THE FOLLOWING ADDRESS:
Safran Landing Systems
574 Monarch Avenue, Ajax, Ontario, Canada, L1S 2G8
ATTN: MRO DOCK 7

### Page 18

APPENDIX 2
Apr 30/2019 700-32-5016Page 1 of 1
IN CASE PAINT IS BUBBLING, LOOSE, FLAKING, CRACKED, DAMAGED OR
MISSING OR VISIBLE PRIMER AND/OR METALLIC-CERAMIC COATING IS
OBSERVED FILL IN THE FORM AND SEND TO:
technical.concession.tor.sls@safrangroup.com
PART NUMBER: 21410-107 PART SERIAL NUMBER:  ______________
AC SERIAL NUMBER: __________ DATE OF INSPECTION:  _______________
DESCRIPTION OF DISCREPANCIES: ________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_______________________________________________________________________
_____
ATTACH PHOTOS SHOWING LOCATIONS AND SEVERITY OF SURFACE FINISH
DISCREPANCIES

### Page 19

MODEL BD-700-1A11 (BD-700) 
APPENDIX 3 
MAIN LANDING GEAR - TRAILING ARM ASSEMBLY 
 
 
 
Bubbling Paint 
 
 
  
 
Corrosion and Bubbling Paint Magnified and Viewed through a Borescope 
 
Examples of Bubbling Paint and Corrosion 
Figure A Apr 
30/2019 Page 1 of 1

### Page 20 (OCR)

BOMBARDIER
GLOBAL 5000
FEATURING GLOBAL VISION FLIGHT DECK
MODEL BD-700-1A11 (BD-700)
APPENDIX 4
1st Inspection Due  1st Inspection  1st Inspection
Trailing Arm 5N  By Date  Trailing Arm SN  Due By Date  Trailing Arm SN  Due By Date
(MM/DD/YY)  (MM/DD/YY)  (MM/DD/YY)
S0D001GHN  5/12/2020  500002L7B  12/11/2020  50000T6F9  6/11/2021
S00001F6D  5/16/2020  500002MQG  12/20/2020  50000T6FC  6/11/2021
S00001GHR  5/16/2020  500002MQH  12/20/2020  50000T6F8  6/11/2021
500001F6C  5/16/2020  500002BK5  12/20/2020  50000T6FB  6/11/2021
S00001GHQ  5/16/2020  500002Q4H  1/8/2021  500002H5D  6/13/2021
500001FJO  5/16/2020  500002Q4G  1/8/2021  50000TGKD  8/9/2021
SODD01GHS  5/16/2020  500002Q4F  1/8/2021  50000TGKB  8/9/2021
S00001J5G  5/24/2020  500002MQJ  1/18/2021  50000TGKC  8/9/2021
SDDDD1GHP  5/24/2020  500002MQF  1/18/2021  50000TGKJ  8/19/2021
S00001175  5/24/2020  500002Q5N  1/22/2021  50000TGKH  8/19/2021
500001J5H  6/22/2020  500002Q5M  1/22/2021  50000TGKF  8/19/2021
S00001L7T  6/22/2020  500002Q5L  1/22/2021  50000TGKG  8/19/2021
500001HV9  6/22/2020  5000034DK  2/6/2021  50000TBDG  9/9/2021
5000022J5  6/22/2020  5000034DQ  2/6/2021  50000TBDJ  9/9/2021
5000022JT  6/22/2020  5000034DP  2/6/2021  50000TBDF  9/9/2021
5000022JV  6/22/2020  5000034DJ  2/6/2021  50000TBDH  9/23/2021
SODDD1FKQ  6/26/2020  500002SD1  2/13/2021  50000TL7Q  9/30/2021
500001HVB  6/26/2020  5000034DG  2/19/2021  50000TKRJ  9/30/2021
S00DD1HVC  6/26/2020  5000025D0  2/19/2021  50000TKRM  9/30/2021
S000022JW  7/25/2020  5000034DH  2/19/2021  50000TKRL  9/30/2021
500002417  8/15/2020  500002Q5K  2/26/2021  50000TL7T  10/4/2021
500002415  8/21/2020  500002PH3  2/26/2021  50000TL7R  10/4/2021
S000025BT  8/21/2020  5000034DS  3/16/2021  S0000TL75  10/4/2021
SODD025BR  8/21/2020  5000034DR  3/16/2021  50000TNH9  11/11/2021
S00002416  8/21/2020  500002PH5  3/16/2021  S0000TNHC  11/11/2021
S00001GHM  9/6/2020  500002PH2  3/16/2021  500001FKP  11/11/2021
S000025BS  9/28/2020  500002PH4  3/16/2021  50000TNHB  11/11/2021
5000025BV  9/28/2020  500003917  3/28/2021  S0000TPVG  11/25/2021
SD0001F6F  9/30/2020  5000037M5  3/28/2021  50000TPVD  11/25/2021
SD0002B5M  9/30/2020  5000037M2  3/28/2021  50000TPVF  11/25/2021
S00002B5J  9/30/2020  500003916  3/28/2021  50000TPVH  11/25/2021
500002B5L  9/30/2020  500003914  3/28/2021  50000TBD9  12/13/2021
500002B5H  9/30/2020  5000037M3  4/16/2021  50000TQGP  12/13/2021
S00001/5F  10/19/2020  500003915  4/16/2021  SO0OOTKRK  12/13/2021
S00002H5F  10/19/2020  5000025D2  4/16/2021  50000TQGQ  12/13/2021
SO0002J7R  10/19/2020  50000T3WG  4/16/2021  S0000TQGN  12/13/2021
S0D002J75  10/19/2020  50000T3WH  4/29/2021  50000TQGM  2/3/2022
500002414  10/31/2020  50000T3WF  4/29/2021  50000TVQR  2/10/2022
S00002J7T  11/1/2020  50000T3WJ  4/29/2021  50000TVQT  2/10/2022
500002LVB  11/13/2020  50000195M  5/13/2021  50000TVQV  2/10/2022
S00002LV2  11/13/2020  50000T95N  5/13/2021  50000TVQS  2/10/2022
500002LV1  11/13/2020  50000T95P  5/13/2021  50000V213  2/24/2022
500002LV4  11/13/2020  50000T95Q  5/13/2021  50000V214  2/24/2022
500001L7V  11/24/2020  50000TBDD  5/24/2021  50000V215  2/24/2022
S00D02NQG  11/27/2020  5000025D3  5/24/2021  50000V216  3/27/2022
S00002NQF  11/27/2020  50000TBDK  5/24/2021  50000V3SZ  3/28/2022
SODDOZNQC  11/27/2020  50000TBDL  5/24/2021  50000V3TO  3/28/2022
5000D2NQD  11/27/2020  500002Q4J  5/27/2021  50000V35W  3/28/2022
S00002L7C  12/11/2020  50000TBOB  6/7/2021  50000V7CR  4/21/2022
S0D002L79  12/11/2020  50000TBDC  6/7/2021  50000V7CT  4/21/2022
S0000267D  12/11/2020  5000037M4  6/7/2021  50000V7CZ  4/28/2022
Table 1. List of Trailing arm assembly serial numbers with potential for reduced
adhesion of primer and paint on axle bore inner diameter.
Apr 30/2019  Page 1 of 2

### Page 21

MODEL BD-700-1A11 (BD-700) 
APPENDIX 4 
 
 
 
Table 1. List of Trailing arm assembly serial numbers with potential for reduced 
adhesion of primer and paint on axle bore inner diameter. 
 
 
 Apr 
30/2019 Page 2 of 2

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
