# Bombardier Service Bulletin 700-35-013

Copy: Revision 01 ("700-35-013_Rev 01"), 20 pages: PDF https://openairdocs.org/files/sha256/3e/82/3e820f8d125115cf03bd289a8d70a1292980a41bf85df633ffa41c175fc36817; text https://openairdocs.org/service-documents/bombardier/sb-700-35-013/file/3e820f8d1251.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2016-5459; AD 2016-15-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-35-013
- Latest revision known: 700-35-013, Revision 01, dated July 22, 2015 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-35-013

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-15-06](https://openairdocs.org/ad/2016-15-06.md), effective Sep 8, 2016: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-35-013/proposed.md).

## Text (20 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2016-5459; AD 2016-15-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Discard the Basic Issue of this Service Bulletin dated Feb 20/2015, and the Information
Sheet dated May 05/2015 and replace in its entirety with this Revision 01.
Service Bulletin No. 700 −35−013
Date of Basic Issue Feb 20/2015
Revision No. 01 Dated Jul 22/2015
This revision has no effect for aircraft on which the Basic Issue of this Service
Bulletin was done thus no other action is necessary. Do not sign the log book if you
have not done this revision. Keep the previous log book entry. You may make an
entry as "Not Applicable" for this revision.
This revision is issued to:
1. Add, in Paragraph 1.B., condition, evidence and objective/benefit headings.
2. Revise, in Paragraph 1.F., NOTE 3.
3. Revise, in Paragraph 1.I., the weight and moment information.
4. Remove, in Paragraphs 1.L. and 3.D., the TLMC reference.
5. Make miscellaneous minor changes, as necessary, with no change of context.
SERVICE BULLETIN
MODEL BD−700−1A10 (BD−700)
700−35−013
Page 1 of 1
REVISION TRANSMITTAL SHEET

### Page 2

ICA — MODIFICATION — OXYGEN CREW —
REPLACEMENT OF FLEXIBLE RELIEF HOSES
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 2500 flight hours or 42 months,
whichever comes first, from this SB
release date (Basic Issue)
EFFECTIVITY: A/C Serial No. 9002 to 9312, 9314 to 9380 and 9384 to 9429
MANPOWER: 3 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE YES NO
PREREQUISITE SERVICE BULLETINS: N/A
NOTE: This SB includes Instructions for Continued Airworthiness (ICA). Refer to
Paragraph 1 (Planning Information) and Paragraph 1.D. (Compliance) for details.
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
www.cic.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 35−10
OXYGEN
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 1 of 1
This Service Bulletin is available at:

### Page 3

ICA — MODIFICATION — OXYGEN CREW —
REPLACEMENT OF FLEXIBLE RELIEF HOSES
1. PLANNING INFORMATION
NOTES: 1. This Service Bulletin includes Instructions for Continued Airworthiness
(ICA).  It is recommended that this Service Bulletin be accomplished by
the specified time compliance stated in Paragraph 1.D.
2. For any technical issues, contact CSE, Technical Support, Global Express
by e−mail at SRPSA@aero.bombardier.com.
A. Effectivity
BD−700−1A10 aircraft, Serial No. 9002 to 9312, 9314 to 9380 and 9384 to 9429.
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action
changes to make sure that this bulletin can be completed.
B. Reason
1. Condition:
The flexible oxygen relief hose, used to vent the oxygen from the crew oxygen
bottle, has a much lower burst pressure (500 psi) than the oxygen−bottle relief
device opening pressure (2500−2775 psi).
SERVICE BULLETIN
www.cic.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 35−10
OXYGEN
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
2015 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 1 of 16
This Service Bulletin is available at:

### Page 4

2. Evidence:
Tests performed have demonstrated that when oxygen is released, the pressure
in the tube could build up to 2000 psi. This may cause the current flexible hoses
to burst when the relief is triggered by an overfill/overpressure situation.
A ruptured flexible oxygen relief hose will prevent the excess oxygen from the
crew oxygen bottle from venting overboard.
3. Objective/Benefit:
This Service Bulletin is issued to replace the existing low/high flexible oxygen
relief hoses with a new convoluted metal hose assembly capable to withstand
operating pressure (3000 psi), proof pressure (6000 psi) and burst pressure
(12,000 psi).
C. Description
This Service Bulletin gives instructions to:
− Get access to the low/high pressure flexible oxygen relief hoses,
− Remove the existing hoses,
− Install the new hoses, and
− Do the necessary tests to make sure that the system operates correctly.
D. Compliance
Recommended within 2500 flight hours or 42 months, whichever comes first, from
this Service Bulletin release date (Basic Issue).
The access and time required to perform this modification are minimal, and we
therefore recommend you perform it at the earliest opportunity.
NOTE: This Service Bulletin contains Instructions for Continued Airworthiness
(ICA).  Failure to comply with the SB within the specified time compliance
stated in this paragraph could result in the issuance of an AD by regulatory
authorities.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in
accordance with established procedures.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
P a g e2o f1 6

### Page 5

F. Manpower
NOTES: 1. The man −hours given are estimates to help you schedule the tasks
given in this bulletin. The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB 700−00−002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3.C.). The accumulated
curing time is not included in the labor estimates and should be
considered for planning purposes before you schedule this Service
Bulletin.
3. Labor hours are based on the fact  that the modification will be done at
the next scheduled maintenance task or inspection (e.g. 750 or 1500
hour inspection etc.). Therefore no man−hours are allotted to prepare
the aircraft for maintenance or to prepare for this Service Bulletin.
3 man−hours are necessary to do this modification.
The labor required to do this Service Bulletin is at no cost if:
− the work is done during new aircraft warranty period, and
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled in less than 2500 flight hours or 42 months,
whichever comes first, from its release date (Basic Issue).
G. Material − Cost and Availability
Kit 700K35−013 is necessary to do this modification.
KIT NO. PRICE
700K35−013
Please contact Bombardier Aerospace
Parts Services, in Montreal, for delivery
lead times and confirmation of prices.
This Service Bulletin is covered by a dedicated schedule. To ensure a timely and
effective return/upgrade program, advance scheduling is required through our
In−Service Implementation Team (ISIT). Please contact your Regional Manager
(RM), Field Service Representative (FSR) or Customer Service Representative
(CSR) as soon as is practical to schedule your aircraft.
The kit is available at no cost if:
− ordered during new aircraft warranty period, and
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 3 of 16

### Page 6

− a no−charge purchase order is sent to Bombardier Aerospace in less than 2500
flight hours or 42 months, whichever comes first, from this Service Bulletin
release date (Basic Issue).
For those aircraft in new aircraft warranty at the time of Service Bulletin distribution,
Smart Parts Plus does not pay for the kit at any time.
For those aircraft out of new aircraft warranty at the time of Service Bulletin
distribution, Smart Parts Plus pays for the kit for up to 42 months from the Service
Bulletin distribution date (Basic Issue).
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
Commercially Available − Wrench, Torque 22.5 to
27.5 lbf in (2.55 to 3.10 Nm)
Commercially Available − Wrench, Torque 40 to
50 lbf in (4.52 to 5.65 Nm)
Commercially Available − Wrench, Torque 70 to
120 lbf in (7.91 to 13.56 Nm)
NOTES: 1. Refer to the Global Express or Global XRS Illustrated Tool and
Equipment Manual (ITEM) to make sure that you use the correct
equipment configuration.
2. Refer to the Liability Statement fo r the GX/XRS for acceptable GSE
equivalents.
3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail. Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
WEIGHT MOMENT
+1.7 pounds (0.77 kg) +399.5 pound−inches (4.60 kgm)
J. Electrical Load Data
No change.
K. References
− TCCA Airworthiness Directive (pending).
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
P a g e4o f1 6

### Page 7

− FAA Airworthiness Directive (pending).
− Bombardier Aerospace, Modification Summary, R700T400542, Rev. B1.
− Bombardier Aerospace, Kit Drawing KGC991−1505, Rev. A.
− Global Express BD−700 Aircraft Maintenance Manual (AMM), Chapters 06, 24,
35 and 52.
− Global Express BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.
− Global Express XRS BD−700 Aircraft Maintenance Manual (AMM), Chapters
06, 24, 35 and 52.
− Global Express XRS BD−700 Aircraft Illustrated Parts Catalog (AIPC),
Chapter 35.
− Global Express or Global Express XRS BD−700 Illustrated Tool and Equipment
Manual (ITEM), Chapter 35.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapters 20 and 51.
L. Other Publications Affected
− Global Express BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.
− Global Express XRS BD−700 Aircraft Illustrated Parts Catalog (AIPC),
Chapter 35.
M. Equivalent Service Bulletin
− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−35−012.
− For the Global 6000 BD−700−1A10 aircraft, use SB 700−35−6001.
− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft,
use SB 700−35−5001.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global Express
or Global Express XRS BD−700 Aircraft Maintenance Manual (AMM)
unless otherwise specified.
2. All references made to zones, access panels and/or doors, are from the
Global Express or Global Express XRS BD−700 Aircraft Maintenance
Manual (AMM), Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
(2) Obey all oxygen −system safety precautions. Refer to
AMM 35−00−00−910−801.
(3) Set the circuit breaker that follows to OUT (on aircraft pre SB 700 −24−045) or
LOCKED (on aircraft, Serial No. 9123 and subsequent or aircraft post SB
700−24−045. Refer to AMM 24−00−00−863−801:
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 5 of 16

### Page 8

SYSTEM NAME CIRCUIT BREAKER NAME BUS NAME
OXYGEN OXYGEN BATT
(4) Remove the forward equipment −compartment access−panels (131AL/132AR).
Refer to AMM 52−45−05−000−801.
WARNING: BE CAREFUL WHEN YOU DO WORK ON OR NEAR THE
CAPILLARY LINES.  CAPILLARY LINES CAN BE EASILY
DAMAGED.  IF THEY ARE DAMAGED, IT CAN CAUSE INJURY TO
PERSONNEL AND DAMAGE TO EQUIPMENT.
CAUTION: USE TWO WRENCHES WHEN YOU REMOVE/TORQUE THE
HOSES/TUBES.  USE ONE WRENCH TO HOLD THE FITTING,
AND THE OTHER WRENCH TO LOOSEN/TORQUE THE
COUPLING NUT.  IF YOU DO NOT DO THIS, YOU CAN CAUSE
DAMAGE TO THE COMPONENTS.
(5) Set the oxygen system to OFF. Refer to AMM 35 −10−00−000−802.
B. Modification
(1) Remove and discard the Low Pressure/High Pressure discharge system
hoses. Refer to AMM 35−10−00−000−802 and Kit Drawing KGC991−1505.
NOTES: 1. Fill lines may be disconnected for access.
2. Put protective covers on all openings.
CAUTION: DO NOT CONTAMINATE INNER BORE OF THE OXYGEN LINES.
SPECIAL CARE MUST BE TAKEN WITH OXYGEN SYSTEM FOR
CLEANING PROCESS AND USE OF COMPOUNDS TO MINIMIZE
THE RISK OF EXPLOSION AND/OR FIRE.
CAUTION: THE MINIMUM BEND RADIUS OF THE HOSE IS 1.50".
EXCESSIVE BENDING OF THE LINE WILL CAUSE DAMAGE TO
THE HOSE, MAKING IT UNSERVICEABLE.
CAUTION: USE THREAD COMPOUND THAT IS APPLICABLE TO THE TYPE
AND LOCATION OF THE PLUMBING LINES.  IF YOU DO NOT DO
THIS, THE THREAD COMPOUND CAN CAUSE CONTAMINATION
OF THE SYSTEM WHICH CAN CAUSE DAMAGE TO THE
EQUIPMENT.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
P a g e6o f1 6

### Page 9

(2) Install the convoluted metal hoses.  Refer to AMM 35 −10−00−400−802 and Kit
Drawing KGC991−1505, NOTES 4, 5, 6 and 7.  Refer to Figure 1 and Figure 2
of this Service Bulletin.
NOTES: 1. Make sure that the mating surfaces are clean with no corrosion,
paint, grease, or preservation fluids.
2. Apply thread compound to fittings.  Refer to SPM Chapter 20.
3. The tee connectors can be adjusted to suit hose installation.
4. No fouling condition acceptable.
CAUTION: USE TWO WRENCHES WHEN YOU INSTALL/TORQUE THE
HOSES/TUBES.  USE ONE WRENCH TO HOLD THE FITTING,
AND THE OTHER WRENCH TO TIGHTEN/TORQUE THE
COUPLING NUT.  IF YOU DO NOT DO THIS, YOU CAN CAUSE
DAMAGE TO THE COMPONENTS.
(3) Torque the plumbing line fittings.  Refer to SPM Chapter 20, "Torquing of
Plumbing Line Fittings in the Oxygen System".
(4) Make a continuous straight stripe across each set of torqued fittings with the
lacquer.  Refer to SPM Chapter 20, "Torquing of Plumbing Line Fittings in the
Oxygen System".
C. Testing
(1) Do an electrical bonding test of the oxygen supply tubes.  Refer to SPM
Chapter 51, "Electrical Bonding Test".
WARNING: BE CAREFUL WHEN YOU DO WORK ON OR NEAR THE
CAPILLARY LINES.  CAPILLARY LINES CAN BE EASILY
DAMAGED.  IF THEY ARE DAMAGED, IT CAN CAUSE INJURY TO
PERSONNEL AND DAMAGE TO EQUIPMENT.
WARNING: MAKE SURE THAT YOU SAFETY THE STORAGE-CYLINDER
REGULATOR SWITCH TO THE ON POSITION WITH LOCKWIRE.
IF THE SWITCH IS CLOSED, THERE WILL BE NO OXYGEN IN
THE OXYGEN SYSTEM.  THIS CAN CAUSE INJURY TO
PERSONS.
(2) Start the oxygen system.  Refer to AMM 35 −10−00−400−802.
(3) In the flight compartment, on the ELECTRICAL control panel, set the BATT
MASTER switch to ON.
(4) Set the circuit breaker that follows to IN.  Refer to AMM 24−00−00−863−802:
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 7 of 16

### Page 10

SYSTEM NAME CIRCUIT BREAKER NAME BUS NAME
OXYGEN OXYGEN BATT
NOTES: 1. On the EICAS, make sure that you do not get the message
OXY LO QTY on the primary display.
2. On the EICAS, on the secondary display, make sure that oxygen
shows 97% to 100%.
(5) In the flight compartment, on the ELECTRICAL control panel, set the BATT
MASTER switch to OFF.
D. Close −out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Install the forward equipment −compartment access−panels (131AL/132AR).
Refer to AMM 52−45−05−400−801.
E. Recording
When this Service Bulletin is completed, make an entry in the aircraft log and send
the attached Incorporation Notice to Bombardier Business Aircraft Customer
Services (BBACS).
In an effort to improve the quality of our technical communications, we are
requesting your feedback.  Please take a moment to fill out our easy on−line
Service Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
Kit 700K35−013 is necessary to do this Service Bulletin and contains the parts that
follow:
NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
3951−04−116 2 Hose Assy 32212E0090C
or
38913−04−0090
Discard
3953−04−097−180 1 Hose Assy 32212E0140C
or
38913−04−0140
Discard
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
P a g e8o f1 6

### Page 11

NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
3953−04−106−195 1 Hose Assy 32212E0100C
or
38913−04−0100
Discard
3953−04−145−070 1 Hose Assy 32212E0090C
or
38913−04−0090
Discard
3954−04−110−025 1 Hose Assy 32212E0140C
or
38913−04−0140
Discard
3954−04−147−145 1 Hose Assy 32212E0060C
or
38913−04−0060
Discard
3954−04−167−260 1 Hose Assy 32212E0140C
or
38913−04−0140
Discard
NOTE: In case of discrepancy between this list and the Service Bulletin Kit Parts
List contained in the respective kit, then the latter list prevails.
B. Parts
No parts required.
C. Material
The materials that follow, or equivalent, are necessary to do this Service Bulletin.
These can be purchased from a local supplier. Bombardier Aerospace does not pay
for these consumables.
DESCRIPTION PART
NO./NAME
SPECIFICATION QUANTITY SUPPLIER
Grease,
Aircraft and
Instrument Fuel
and Oxidizer
Resistant
− MIL−PRF−27617
Type II (for
straight threads)
As Necessary Code: A
Lacquer,
Cellulose Nitrate
Gloss, for
Aircraft
− TT−L−32 Color
White
As Necessary Code: B
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 9 of 16

### Page 12

DESCRIPTION PART
NO./NAME
SPECIFICATION QUANTITY SUPPLIER
Epoxy, Coating
Clear
− MIL−C22750 As Necessary Code: C
NOTES: 1. Refer to the table that follows for each supplier’s address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Dupont Canada Inc
201 Blair St. S.
Whitby, Ontario
Canada, L1N 1W2
Tel.: (514) 555−1212
www.dupont.ca
Code: B
Randolph Products Co.
33 Haynes Cir.
Chicopee, MA, 01020−3712
U.S.A.
Tel.: (413) 592−4191
www.randolphproducts.com
Code: C
Tempo Aerospace Inc.
205 Fenmar Dr.
Toronto, Ontario
Canada, M9L 2X4
Tel.: (416) 746−2233
www.tempo−aerospace.com
D. Publications
The publications that follow are required after this Service Bulletin has been
incorporated.
− Global Express BD−700 Aircraft Illustrated Parts Catalog (AIPC), Chapter 35.
− Global Express XRS BD−700 Aircraft Illustrated Parts Catalog (AIPC),
Chapter 35.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 10 of 16

### Page 13

FSB3510_001
Item
3
4
5
6
Part Number
3951 −04 −116
3954 −04 −147 −145
3953 −04 −097 −180
3954 −04 −110 −025
Description 
Hose Assy, Straight to 90°, Flared
Hose Assy, 45° to 90°, Flared
Hose Assy, 90° to 90°, Flared
Hose Assy, 45° to 90°, Flared
Figure 1 − Post Mod Installation − LHS
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 11 of 16

### Page 14

FSB3510_002
Item
3
7
8
9
Part Number
3951 −04−116
3953 −04−145 −070
3953 −04−106 −195
3954 −04−167 −260
Description 
Hose Assy, Straight to 90°, Flared
Hose Assy, 90° to 90°, Flared
Hose Assy, 90° to 90°, Flared
Hose Assy, 45° to 90°, Flared
Figure 2 − Post Mod Installation − RHS
MODEL BD−700−1A10 (BD−700)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 12 of 16

### Page 15

MODEL BD−700−1A10 (BD−700)
PL KGC991−1505 − Kit − Oxygen Discharge System Low/High Pressure Lines
Replacement
(Sheet 1 of 1, Rev. A)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 13 of 16

### Page 16

KGC991−1505 − Kit − Oxygen Discharge System Low/High Pressure Lines Replacement
(Sheet 1 of 1, Rev. A)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 14 of 16

### Page 17

KGC991−1505 − Kit − Oxygen Discharge System Low/High Pressure Lines Replacement
(Sheet 1 of 1, Rev. A, continued)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 15 of 16

### Page 18

KGC991−1505 − Kit − Oxygen Discharge System Low/High Pressure Lines Replacement
(Sheet 1 of 1, Rev. A, continued)
Basic Issue: Feb 20/2015
Revision 01: Jul 22/2015
700−35−013
Page 16 of 16

### Page 19

700−35−013 Rev. 01 Jul 22/2015
ICA — MODIFICATION — OXYGEN CREW —
REPLACEMENT OF FLEXIBLE RELIEF HOSES
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 20

SERVICE BULLETIN INCORPORATION SHEET − "700−35−013"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier. If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
700−35−013 01
COMPLIED WITH
YES    NO    N/A
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
