# Bombardier Service Bulletin 700-52-046

Copy: No revision named ("700_52_046_basic"), 12 pages: PDF https://openairdocs.org/files/sha256/06/38/06385d7c4510518cffa3ea6b9fc06b1ede1607112b743dc84443cd1b306a882d; text https://openairdocs.org/service-documents/bombardier/sb-700-52-046/file/06385d7c4510.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2016-3989; AD 2016-17-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-52-046
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-52-046

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-17-16](https://openairdocs.org/ad/2016-17-16.md), effective Oct 5, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-52-046/proposed.md).

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2016-3989; AD 2016-17-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Basic Issue: Oct 04/2013 700-52-046 
  Page 1 of 1 
SERVICE BULLETIN SUMMARY 
This Service Bulletin is available at: 
www.cic.bombardier.com  
MODEL BD-700-1A10 (BD-700) 
ATA 52-11 
DOORS 
REWORK – PASSENGER DOOR –  
REPLACEMENT OF PAX DOOR TENSATOR SPRINGS 
The information below is provided for your reference.  For full details, please 
see corresponding paragraph contained within this bulletin. 
RECOMMENDED
SPECIFIED TIME COMPLIANCE 
COMPLIANCE TIME 
Within 15 Months of this  
Service Bulletin release date (Basic Issue) 
EFFECTIVITY: A/C Serial No. 9009, 9018, 9035, 9060, 9101, 9125, 9136, 9141, 9185, 
9193, 9202, 9223, 9268 and 9278 to 9360 
MANPOWER: 40 man-hours 
CONTINUED AIRWORTHINESS (CAW)  
FLEET CAMPAIGN 
YES  NO  
KITS and/or PARTS YES  NO  
TOOLING/GSE YES  NO  
PLANNING INFORMATION YES  NO  
DEDICATED SCHEDULE YES  NO  
PREREQUISITE SERVICE BULLETINS: N/A 
To place an order for parts or kits, please call Bombardier Aerospace Parts Services at: 
514-855-2999 or 1-866-538-1247

### Page 2

Refer to applicable governmental agency regulations and requirements and make sure that the work described in this 
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards. 
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or 
by any means without the prior written consent of Bombardier Inc. and/or its affiliates. 
© 2013 Bombardier Inc.  All rights reserved 
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries. 
Basic Issue: Oct 04/2013 700-52-046 
  Page 1 of 8 
SERVICE BULLETIN 
This Service Bulletin is available at: 
www.cic.bombardier.com  
MODEL BD-700-1A10 (BD-700) 
ATA 52-11 
DOORS 
REWORK – PASSENGER DOOR –  
REPLACEMENT OF PAX DOOR TENSATOR SPRINGS 
1. PLANNING INFORMATION 
A Effectivity 
BD-700-1A10 aircraft, Serial No. 9009, 9018, 9035, 9060, 9101, 9125, 9136, 
9141, 9185, 9193, 9202, 9223, 9268 and 9278 to 9360. 
NOTE: The instructions given in this Service Bulletin are only applicable to  
the systems and parts installed at the time of delivery of the aircraft  
or as changed by Bombardier Aerospace Service Bulletin(s).  
Before you do this bulletin, examine all STC, STA or equivalent  
action changes to make sure that this bulletin can be completed. 
B Reason 
Operators have reported premature failure of the passenger door tensator 
springs.  After investigation, it was determined that the spring manufacturer did 
not adequately heat treat the steel. 
As a result of this, micro-fracturing and micro-pore formation was noticed on the 
tensator springs.  This can cause failure under cyclic loading prior to the TLMC life 
limit.  There are four tensator springs used to assist and counter balance the 
weight of the passenger door.  These work together with the passenger door 
actuator to close and control the rate of descent of the door when opening. 
This Service Bulletin replaces all four tensator springs thus preventing unexpected 
downtime and maintenance costs.

### Page 3

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 2 of 8 
C Description 
This Service Bulletin gives instructions to: 
– Open the passenger door, 
– Get access and remove the tensator springs from the passenger door,  
– Install a new set of tensator springs, and 
– Do the operational tests of the passenger door. 
D Compliance 
Recommended in less than 15 months from this Service Bulletin release date 
(Basic Issue). 
E Approval 
The technical content of this Service Bulletin has been approved under  
the authority of Transport Canada Civil Aviation (TCCA) Design Approval 
Organization (DAO) No. DAO #93-Q-02. 
NOTES: 1. The technical content of this Service Bulletin is accepted by the  
FAA under the Canada/USA bilateral Aviation Safety Agreement. 
2. The technical content of this Service Bulletin is accepted by EASA  
in accordance with established procedures. 
F Manpower 
NOTES: 1. The man-hours given are estimates to help you schedule the tasks  
given in this bulletin.  The estimates are for direct labor performed by  
an experienced crew and do not include the time for familiarization, 
planning, aircraft preparation in hangar such as towing and 
positioning of scaffolds, removal of interior furnishings, repainting, 
supervision and inspection.  
For more information related to the manpower estimates, refer to  
SB 700-00-002. 
2. This Service Bulletin may require consumable materials that have 
specific curing times (refer to Paragraph 3).  The accumulated curing 
time is not included in the labor estimates and should be considered 
for planning purposes before you schedule this Service Bulletin. 
3. Labor hours are based on the fact  that the modification will be done 
at the next scheduled maintenance task or next “C” check.  Therefore 
no man-hours are allotted to prepare the aircraft for maintenance or 
to prepare for this Service Bulletin. 
40 man-hours are necessary to do this rework.

### Page 4

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 3 of 8 
The labor required to do this Service Bulletin is at no cost if:  
(i) the work is done at Bombardier Business Aviation Services (BBAS) 
or Authorized Service Facilities (ASF), and  
(ii) this Service Bulletin is schedul ed in less than 15 months from its 
release date (Basic Issue). 
G. Material - Cost and Availability 
No kits are necessary to do this rework. 
The parts in Paragraph 3.B. are necessary to do this rework. 
These parts are available at no cost if: 
(i)  ordered during new aircraft warranty period, and 
(ii) a no-charge purchase order is sent  to Bombardier Aerospace in less 
than 15 months from this Service Bulletin release date (Basic Issue). 
For those aircraft in new aircraft warranty at the time of Service Bulletin 
distribution, Smart Parts Plus does not pay for the parts(s) at any time. 
For those aircraft out of new aircraft warranty at the time of Service Bulletin 
distribution, Smart Parts Plus pays for the parts(s) for up to 15 months from the 
Service Bulletin distribution date (Basic Issue). 
H. Tooling 
The equipment and tools listed below are necessary to do this rework:  
GSE REFERENCE NO. PART NO. DESCRIPTION 
20X-10-01 - Tag, Circuit Breaker 
52X-11-01 - Support – Drop Down Door 
52X-11-02 - Rigging – pin, Tensator spring 
52X-11-03 - Door Lifting Sling 
52X-11-07 - Strap, Pre – Load Torsion 
52X-11-09 - Passenger Door Restraint Tool 
52X-11-10 - Passenger Door Lowering Tool 
52X-11-11 - Lanyard, Passenger – Door 
Manual 
Commercially Available - Cable Tension Meter

### Page 5

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 4 of 8 
GSE REFERENCE NO. PART NO. DESCRIPTION 
Commercially Available - Torque Wrench 160 to 190 lbf in
(18.08 to 21.47 Nm) 
Commercially Available - Torque Wrench 0 to 30 lbf in 
(0 to 3.39 Nm) 
NOTES: 1. Refer to the Global Express or Global Express XRS BD-700-1A10 
Illustrated Tool and Equipment Manual (ITEM) to make sure that you 
use the correct equipment configuration. 
2. Refer to the Liability Statement in the ITEM for the GX, XRS, for 
acceptable GSE equivalents. 
I. Weight and Balance 
No change. 
J. Electrical Load Data 
No change. 
K. References 
– Bombardier Aerospace, Restriction and/or Special Instruction (RSI),  
C-01585, Rev. NC. 
– Global Express BD-700-1A10 Aircraft Maintenance Manual (AMM),  
Chapters 6, 24, 52 and 53. 
– Global Express or Global Expre ss XRS BD-700 Illustrated Tool and 
Equipment Manual (ITEM), Chapter 20 and 52. 
– Global Express XRS BD-700-1A10 Aircraft Maintenance Manual (AMM), 
Chapters 6, 24, 52 and 53. 
L. Other Publications Affected 
None. 
M. Equivalent Service Bulletin 
– For the Global 5000 BD-700-1A11 aircraft, use SB 700-1A11-52-023.

### Page 6

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 5 of 8 
2. ACCOMPLISHMENT INSTRUCTIONS 
NOTES: 1. All TASKs given in the procedur es that follow are from the Global 
Express or Global Express XRS BD-700-1A10, Aircraft Maintenance 
Manual (AMM) unless otherwise specified. 
2. All references made to zones, access panels and/or doors, are from  
the Global Express or Global Express XRS BD-700-1A10, Aircraft 
Maintenance Manual (AMM), Chapter 6. 
A. Aircraft Setup 
(1) Obey all electrical/electronic safety precautions.  Refer to  
TASK 24-00-00-910-801. 
(2) Remove the flight compartment floor-panel 221 DLF to get access to  
the circuit breakers on the DC power center (DCPC).  Refer to  
Task 24-00-00-910-801. 
(3) Open and tag the circuit breakers that follow: 
LOCATION CB NO. NAME ZONE 
DCPC B6 PAX DOOR MOTOR 130 
(4) Open the passenger door.  Refer to TASK 52-11-00-010-801. 
B. Replacement of the Tensator Springs 
(1) Remove the tensator springs.  Refer to TASK 52-11-41-000-801. 
(2) Install the new tensator spri ngs.  Refer to TASK 52-11-41-400-801. 
(3) Remove the tag and close the circuit breaker that follows: 
LOCATION CB NO. NAME ZONE 
DCPC B6 PAX DOOR MOTOR 130 
C Testing 
Do the operational test of the passenger door.  Refer to TASK 52-11-00-710-801. 
D Close-out 
(1) Remove all tools, equipment and unwanted materials from the aircraft. 
(2) Install the flight compartment  floor-panel 221 DLF.  Refer to  
TASK 53-11-01-400-801. 
(3) Close the passenger door.  Refer to TASK 52-11-00-410-801.

### Page 7

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 6 of 8 
E Recording 
When this Service Bulletin is completed, make an entry in the aircraft log and 
send the attached Incorporation Notice to Bombardier Business Aircraft Customer 
Services (BBACS). 
In an effort to improve the quality of our technical communications, we are 
requesting your feedback.  Please take a moment to fill out our easy on-line 
Service Bulletin survey: 
http://csefeedback.aero.bombardier.com 
3. MATERIAL INFORMATION 
A. Kit 
No kits required. 
B. Parts 
The parts that follow are necessary to do this Service Bulletin and are available 
from Bombardier Aerospace Parts Services, Montreal: 
NEW  
PART NO. 
QTY ITEM USED 
PART NO. 
INSTRUCTIONS -
DISPOSITION 
GS321-0580-1 4 Tensator Spring GS321-0580-1 Discard 
MS24665-155 41 Cotter pin Split MS24665-155 Discard 
MS24665-374 3 Cotter pin Split MS24665-374 Discard 
MS24665-377 3 MS24665-377 MS24665-377 Discard 
NOTE: The part numbers for the items listed above are subject to change without 
revision to this Service Bulletin.  In case of discrepancy between this list 
and any other list, the Illustrated Parts Catalog prevails and shall be used 
to determine the latest part number.

### Page 8

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 7 of 8 
C. Material 
The materials that follow are necessary to do this Service Bulletin.  These can be 
purchased from a local supplier.  Bombardier Aerospace does not pay for these  
consumables. 
DESCRIPTION PART 
No./NAME 
SPECIFICATION QUANTITY SUPPLIER
(See Note)
Grease Aeroshell 
Grease 7 
MIL-PRF-23827 
Type II 
As 
Necessary 
Code: A 
Grease 
Silicone Low 
Temperature 
Molycote No.33 - As 
Necessary 
Code: B 
Solvent Diestone DLS 
or  
Diestone HFP 
or 
HFE-71DA 
- As 
Necessary 
Code: C 
Brush, Paint, 
Natural or 
Synthetic 
Bristle. 
- - As 
Necessary  
Code: D 
Cloth, Cleaner, 
Low Lint 
- - As 
Necessary 
Code: D 
Lockwire - MS20995-C32 As 
Necessary 
Code: D 
Solvent, 
Degreaser 
- MIL-PRF-680 As 
Necessary  
Code: D 
Tape, Masking - - As 
Necessary 
Code: D 
NOTES: 1. Refer to the table that follows for each supplier’s address listed by 
codes. 
2. The Curing Time (CT), if applicable, for each consumable material is 
indicated with the description of each product. 
3. At time of release of this Service Bulletin, the information on the 
supplier was valid and accurate.  In the event that this information 
has changed, the operator is encouraged to use the World Wide Web 
to find a local supplier.

### Page 9

MODEL BD-700-1A10 (BD-700) 
Basic Issue: Oct 04/2013 700-52-046 
  Page 8 of 8 
 
SUPPLIERS ADDRESSES BY CODES 
Code: A 
Shell Canada Limited 
4004 th Avenue S.W Calgary Alberta 
Canada T2P 0J4 
Tel.: 1-800-661-1600 
Code: B 
Dow Corning Corporation 
Corporate Center, PO box 994 
Midland, MI, 48686-0994 
USA 
Tel.: 1-989-496-4400 
Code: C 
MagChem Inc 
1271 Ampere 
Boucherville, Que. 
Canada, J4B 5Z5 
Tel.: (450) 655-1344 
or 
3M Product Information Center 
3M Center, 
Building 0304-01-01 
St. Paul, MN 55144-1000 
U.S.A. 
Tel.: 1-888-364-3577 
Fax: 1-800-713-6329 
Code: D 
Commercially Available 
D. Publications 
No publications required.

### Page 10

SERVICE BULLETIN EVALUATION FORM 
(Your ideas will help us provide better bulletins) 
SERVICE BULLETIN: 700-52-046 ISSUE: Basic DATED: Oct 04/2013 
      
TITLE: Rework – Passenger Door – Replacement of Pax Door Tensator Springs 
 
 
 
 
 
 
 
In an effort to improve the quality of our technical communications, we are replacing 
the standard Service Bulletin Evaluation Form with an on-line Service Bulletin 
Survey and we are requesting your feedback.  Please take a moment to fill out our 
easy on-line Service Bulletin survey:   
 
 
 
 
 
http://csefeedback.aero.bombardier.com

### Page 11

SERVICE BULLETIN INCORPORATION SHEET – “700-52-046” 
 
BOMBARDIER 
SUBMISSION Upon completion of the Service Bulletin, please fill-in, fax to 
(514) 855-8798 or e-mail to Fracas at fracas.montreal@aero.bombardier.com 
 
If your aircraft is registered on CAMP and you are reporting to them, 
please do not send the incorporation sheet to Bombardier. If your aircraft 
is on another tracking system, please contact Bombardier to make 
arrangements for automated data submission. 
 
 
           COMPLIED WITH  
 Service Bulletin 
Number 
 Rev.  * Parts 
Completed 
YES NO N/A Remarks/Reason 
 700-52-046  Basic  -     
 -  -  -     
 -  -  -     
 
 Actual hours to accomplish Service Bulletin:    
 
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A, B, 
C, D, etc.) which can be carried out separately, indicate only those parts 
completed at this time. 
2. For repetitive checks (usually PART A) only the initial check should be reported 
unless otherwise stated in the Service Bulletin. 
* NOTES:  
 
 
  
  3. When more than one part is carried out at the same time, each part should be 
reported. 
 
 Aircraft Serial No.   Aircraft Reg. No.   
 Airframe Hours:   Airframe Landings   
 S.B. Incorporation date   Service Order No.   
  (dd/mm/yy)    
 Facility Incorporating S.B.  
 Name  Signature  Date  
                               (dd/mm/yy) Signature not required if sent by E-Mail

### Page 12

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --  
 
 
 
 
 
Bombardier Business Aircraft Customer Services (BBACS) 
P.O. Box 6087, Station Centre-ville 
Montreal, Québec, Canada H3C 3G9 
 
Attention: Customer Support Department, Maintenance Engineering 
 
 
 
 
 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
