# Bombardier Service Bulletin 700-71-6003

Copy: No revision named ("700_71_6003_Basic"), 23 pages: PDF https://openairdocs.org/files/sha256/48/10/4810be19d37774ad674368aaf1607783d052c680b297d35f320026d76743cecb; text https://openairdocs.org/service-documents/bombardier/sb-700-71-6003/file/4810be19d377.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0775; AD 2018-09-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 700-71-6003
- Page: https://openairdocs.org/service-documents/bombardier/sb-700-71-6003

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-09-15](https://openairdocs.org/ad/2018-09-15.md), effective Jun 15, 2018: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-700-71-6003/proposed.md).

## Text (23 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0775; AD 2018-09-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

MODIFICATION — REAR MOUNT — REPLACEMENT OF RETAINING BOLT AND NUT
ON THE LOWER/UPPER ENGINE REAR MOUNT ASSEMBLY
The information below is provided for your reference. For full details, including labor and part
coverage, please see corresponding paragraph contained within this bulletin.
RECOMMENDED
SPECIFIED TIME COMPLIANCE
COMPLIANCE TIME
Within 1000 flight hours or 12 months,
whichever comes first, from Service
Bulletin release date (Basic Issue)
EFFECTIVITY: A/C Serial No. 9313, 9381 and 9432 to 9785
MANPOWER: PART A: 1 man−hour
PART B: 2.5 man−hours
CONTINUED AIRWORTHINESS (CAW)
FLEET CAMPAIGN NOYES
TLMC, CH 5 AFFECTED NOYES
KITS and/or PARTS YES NO
TOOLING/GSE YES NO
PLANNING INFORMATION: See important
information at the start of Paragraph 1. YES NO
DEDICATED SCHEDULE NOYES
PREREQUISITE SERVICE BULLETINS: N/A
To place an order for parts or kits, please call Bombardier Aerospace Parts Services
at:
514−855−2999 or 1−866−538−1247
SERVICE BULLETIN SUMMARY
www.cic.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 71−24
POWER PLANT
Basic Issue: Dec 05/2016 700−71−6003
Page 1 of 1
This Service Bulletin is available at:

### Page 2

MODIFICATION — REAR MOUNT — REPLACEMENT OF RETAINING BOLT AND NUT
ON THE LOWER/UPPER ENGINE REAR MOUNT ASSEMBLY
1. PLANNING INFORMATION
NOTES: 1. If Service Bulletin 700 –71–6002 was incorporated on your aircraft, PART
A of this Service Bulletin 700–71–6003 is not applicable. Do PART B of
Service Bulletin 700–71–6003 only.
2. Service Bulletin 700 –71–6002 is no longer applicable after the
incorporation of this Service Bulletin 700–71–6003, as this is a change of
design.
A. Effectivity
BD−700−1A10 aircraft, Serial No. 9313, 9381 and 9432 to 9785.
All other subsequent BD−700−1A10 aircraft are scheduled for the modification in
production (Ref.: Modification Summary 700T02578).
NOTE: The instructions given in this Service Bulletin are only applicable to the
systems and parts installed at the time of delivery of the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s).
Before you do this bulletin, examine all STC, STA or equivalent action
changes to make sure that this bulletin can be completed.
SERVICE BULLETIN
www.cic.bombardier.com
MODEL BD−700−1A10 (BD−700)
ATA 71−24
POWER PLANT
Refer to applicable governmental agency regulations and requirements and make sure that the work described in this
Service Bulletin is performed in compliance with manufacturer’s recommendations and/or acceptable industry standards.
This document is proprietary to Bombardier Inc. and/or its affiliates and may not be reproduced or copied in any form or
by any means without the prior written consent of Bombardier Inc. and/or its affiliates.
 2016 Bombardier Inc.  All rights reserved
Learjet, Challenger, Global, are registered trademarks of Bombardier Inc. or its subsidiaries.
Basic Issue: Dec 05/2016 700−71−6003
Page 1 of 20
This Service Bulletin is available at:

### Page 3

B. Reason
1. Condition:
An operator reported, while the aircraft was in maintenance, that the mount pin
at the lower rear engine mount was found backed out of the rear mount link. The
retaining bolt that passes through the mount pin, which holds the mount pin in
place, was found broken. The nut was found separated from the assembly on
the lower cowl below the engine.
2. Evidence:
The investigation has found that the bolt failed under static tension loading with
no evidence of fatigue related to the fracture. There was no nonconformance
discovered with the hardware.
3. Objective/Benefit:
This Service Bulletin replaces the existing bolts and self locking nuts located at
the attachment points (four per engine) of the links, between the engine rear
mount assemblies, with new bolts with castellated self locking nuts and
additional cotter pins.
C. Description
This Service Bulletin gives instructions in PART A to:
− Measure gaps on existing hardware installation.
This Service Bulletin gives instructions in PART B to:
− Replace the hardware on the left and right engine rear mount assemblies, and
− Measure gaps on new hardware installation.
D. Compliance
Recommended in less than 1000 flight hours or 12 months, whichever comes first
from this Service Bulletin release date (Basic Issue).
NOTE: This Service Bulletin is in reference to Advisory Wire AW700 –71–0557.
E. Approval
The technical content of this Service Bulletin has been approved under the
authority of Transport Canada Civil Aviation (TCCA) Design Approval Organization
(DAO) No. DAO #93−Q−02.
NOTES: 1. The technical content of this Service Bulletin is accepted by the FAA
under the Canada/USA bilateral Aviation Safety Agreement.
2. The technical content of this Service Bulletin is accepted by EASA in
accordance with established procedures.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 2 of 20

### Page 4

F. Manpower
NOTES: 1. The man−hours given are estimates to help you schedule the tasks
given in this bulletin. The estimates are for direct labor performed by
an experienced crew and do not include the time for familiarization,
planning, aircraft preparation in hangar such as towing and
positioning of scaffolds, removal of interior furnishings, repainting,
supervision and inspection.
For more information related to the manpower estimates, refer to
SB 700−00−6002.
2. This Service Bulletin may require consumable materials that have
specific curing times (refer to Paragraph 3). The accumulated curing
time is not included in the labor estimates and should be considered
for planning purposes before you schedule this Service Bulletin.
1 man−hour is necessary to do PART A of this Service Bulletin.
Bombardier Aerospace does not pay for the labor to do PART A.
2.5 man−hours are necessary to do PART B of this Service Bulletin.
The labor required to do PART B of this Service Bulletin is at no cost if:
− the work is done at Bombardier Business Aviation Services (BBAS) or
Authorized Service Facilities (ASF), and
− this Service Bulletin is scheduled in less than 1000 flight hours or 12 months,
whichever comes first from this Service Bulletin release date (Basic Issue).
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 3 of 20

### Page 5

G. Material − Cost and Availability
Kit 700K71–6003 is necessary to do this modification. For material data, refer to
Paragraph 3.
KIT NO. PRICE
700K71–6003 Please contact Bombardier Aerospace
Parts Services, in Montreal, for delivery
lead times and confirmation of prices.
This kit is available at no cost if a no−charge purchase order is sent to Bombardier
Aerospace in less than 1000 flight hours or 12 months, whichever comes first from
this Service Bulletin release date (Basic Issue).
During or after the above free period, Smart Parts Plus does not pay for the kit.
H. Tooling
The equipment and tools listed below are necessary to do this modification:
GSE REFERENCE NO. PART NO. DESCRIPTION
20X−10−01 S4933959−501 Tag, Circuit Breaker (Red
Ring)
71X−13−02 G700−711302−1 Protective Mats − Lower
Engine Cowl
− − Wrench, Torque 40 to
200 lbf in (4.5 to 22.5
Nm)
NOTES: 1. Refer to the Global 6000 Illustrated Tool and Equipment Manual
(ITEM) to make sure that you use the correct equipment
configuration.
2. Refer to the Liability Statement in the ITEM for the G6000 for
acceptable GSE equivalents.
3. This list is provided for quick reference. In case of discrepancy
between this list and the tools called in the SPM, WM, Chapter 20,
then the tools called in the SPM, WM prevail. Other approved
alternative tools are acceptable and can also be used.
I. Weight and Balance
Refer to Rolls−Royce, Service Bulletin SB−BR700−71−101975, Revision 1, dated
Nov 17/16.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 4 of 20

### Page 6

J. Electrical Load Data
No change.
K. References
− TCCA Airworthiness Directive (pending).
− Bombardier Aerospace, Modification Summary, 700T02578, Rev. A2.
− Bombardier Aerospace, Standard Practices Manual (SPM), Chapter 20.
− Bombardier Aerospace, SB 700 –71–6002 Special Check/Rework — Rear
Mount — Inspect the Retaining Bolt and Nut on the Lower/Upper Engine Rear
Mount Assembly.
− Rolls−Royce, Service Bulletin SB−BR700−71−101975, Revision 1, dated
Nov 17/16. (attached)
− Advisory Wire AW700 –71–0557.
− Global 6000 BD−700 Aircraft Maintenance Manual (AMM), Chapters 6, 24, 71
and 78.
− Global 6000 BD−700 Illustrated Tool and Equipment Manual (ITEM), Chapters
20 and 71.
L. Other Publications Affected
None.
M. Equivalent Service Bulletins
− For the Global Express and Global Express XRS BD−700−1A10 aircraft, use
SB 700−71−003.
− For the Global 5000 BD−700−1A11 aircraft, use SB 700−1A11−71−003.
− For the Global 5000 BD−700−1A11 Featuring Global Vision Flight Deck aircraft,
use SB 700−71−5003.
2. ACCOMPLISHMENT INSTRUCTIONS
NOTES: 1. All TASKs given in the procedures that follow are from the Global 6000
BD−700−1A10 Aircraft Maintenance Manual (AMM) unless otherwise
specified.
2. All references made to zones, access panels and/or doors, are from the
Global 6000 BD−700−1A10 Aircraft Maintenance Manual (AMM),
Chapter 6.
A. Aircraft Setup
(1) Obey all electrical/electronic safety precautions. Refer to
AMM 24−00−00−910−801.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 5 of 20

### Page 7

(2) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to LOCKED, refer to AMM 24−00−00−863−801:
For the left engine:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
APU APU START BATT
ENGINE L FADEC CH A BATT
ENGINE L FADEC CH B BATT
ENGINE L ENG IGN 1 BATT
ENGINE L ENG IGN 2 BATT
ENGINE L ENG FUEL HPSOV BATT
ENGINE L ENG START A BATT
ENGINE L ENG START B BATT
THRUST REVERSER L T/R CTL VALVE BATT
THRUST REVERSER L T/R UPPER LOCK BATT
THRUST REVERSER L T/R LOWER LOCK BATT
THRUST REVERSER L T/R TQA LOCK BATT
HYD HYD PUMP 1B AC 3
For the right engine:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
APU APU START BATT
ENGINE R FADEC CH A BATT
ENGINE R FADEC CH B BATT
ENGINE R ENG IGN 1 BATT
ENGINE R ENG IGN 2 BATT
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 6 of 20

### Page 8

SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
ENGINE R ENG FUEL HPSOV BATT
ENGINE R ENG START A BATT
ENGINE R ENG START B BATT
THRUST REVERSER R T/R CTL VALVE BATT
THRUST REVERSER R T/R UPPER LOCK BATT
THRUST REVERSER R T/R LOWER LOCK BATT
THRUST REVERSER R T/R TQA LOCK BATT
HYD HYD PUMP 2B AC 2
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 7 of 20

### Page 9

(3) Open and tag the circuit breakers that follow to make sure the heaters do not
come on:
For the left engine:
LOCATION CB NO. NAME ZONE
CCBP H7 PITOT 1 HT A 222
CCBP F5 PITOT 1 HT B 222
CCBP F6 PITOT 3 HT 222
CCBP F4 L AOA HEAT 222
CCBP F3 TAT HT 1 222
For the right engine:
LOCATION CB NO. NAME ZONE
CCBP B1 PITOT 2 HT 222
CCBP F10 STBY PITOT HT 222
CCBP H9 R AOA HEAT A 222
CCBP F8 R AOA HEAT B 222
CCBP F9 TAT HT 2 222
(4) Open and tag the circuit breakers that follow:
For the left engine:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
DCPC A3 L ENG FUEL SOV 130
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 8 of 20

### Page 10

For the right engine:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
DCPC A4 R ENG FUEL SOV 130
(5) Open access door (311BB).
WARNING: MAKE SURE THAT YOU DO A DEACTIVATION OF THE THRUST
REVERSER BEFORE YOU DO WORK ON THE ENGINE. THE
THRUST REVERSER CAN ACCIDENTALLY OPERATE. THIS CAN
CAUSE INJURY TO PERSONS OR DAMAGE TO THE EQUIPMENT.
(6) Obey all the thrust reverser safety precautions. Refer to
AMM 78−30−00−910−801.
(7) Do the deactivation of the thrust reverser (for maintenance). Refer to
AMM 78−30−00−040−801.
(8) Obey all engine safety precautions. Refer to AMM 71−00−00−910−801.
(9) Open the cowls. Refer to AMM 71−10−00−010−801.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 9 of 20

### Page 11

exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
SSB2206_001
MAIN ISOMETRIC VIEW OF
REAR MOUNT BEAM ASSEMBLY
VIEW LOOKING FORWARD
ON LEFT HAND ENGINE INSTALLATION 
MAIN ISOMETRIC VIEW OF
REAR MOUNT BEAM ASSEMBLY
VIEW LOOKING FORWARD
ON RIGHT HAND ENGINE INSTALLATION 
MODEL BD−700−1A10 (BD−700)
Figure 1
Basic Issue: Dec 05/2016 700−71−6003
Page 10 of 20

### Page 12

B. PART A — Measurement of the Gaps on the Engine Rear Mount Assembly
Hardware
NOTE: Refer to Figure 1 for the eight installation positions where the bolts and
nuts are replaced in this Service Bulletin.
(1) If Service Bulletin 700 –71–6002 was incorporated on your aircraft, PART A of
this Service Bulletin is not applicable. Go to Paragraph 2.C. and do PART B of
this Service Bulletin.
(2) If Service Bulletin 700 –71–6002 was not incorporated on your aircraft, do the
steps that follow:
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE
DURING OR AFTER AN ENGINE OPERATION. THE ENGINE
PARTS STAY HOT FOR APPROXIMATELY THREE HOURS
AFTER THE ENGINE STOPS. THIS CAN CAUSE INJURY TO
PERSONS.
WARNING: BE CAREFUL IF YOU MUST DO WORK ON HOT
COMPONENTS. USE APPROVED GLOVES AND
PROTECTIVE CLOTHING. IF YOU DO NOT DO THIS, YOU
CAN CAUSE INJURY TO PERSONS.
(a) Measure Gap A at positions A, B, C and D, as shown in Figure 2, views
A−A. The gap between the shouldered bushing fitted on the mount beam
and the washer, Part No. BRR15837, must be between 0.004 and 0.043 in
(0.1 and 1.1 mm).
NOTES: 1. The mount pin, Part No. BRR15835, can be installed from
either direction. If applicable, measure the gap between the
shouldered bushing fitted on the mount beam, and the head
of the mount pin.
2. If the gap is not within acceptable limits, fill out an SRPSA
and send it by E−mail at:
SRPSA@aero.bombardier.com
(b) Measure Gap B at positions E, F, G and H, as shown in Figure 2, views
A−A. The gap between the engine ring lug, Part No. BRR21165, and the
head of the mount pin, Part No. BRR15838, must be between 0.028 and
0.048 in (0.7 and 1.2 mm).
NOTE: If the gap is not within acceptable limits, fill out an SRPSA and
send it by E−mail at:
SRPSA@aero.bombardier.com
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 11 of 20

### Page 13

exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
SSB7124_004
 
ENGINE RING
LUG BRR21165
GAP A
SECTION 
ROTATED FOR CLARITY
TYPICAL 4 POSITIONS
REPEAT SECTION
ROTATED FOR CLARITY
SHOWING ALTERNATIVE
METHOD OF ASSEMBLY
TYPICAL 4 POSITIONS
 ENGINE RINGLUG BRR21165
GAP B GAP B
GAP B = 0.028 − 0.048 in (0.7 − 1.2 mm)
GAP A = 0.004 − 0.043 in (0.1 − 1.1 mm)
GAP A
MOUNT PIN
BRR15838 MOUNT PINBRR15838
SHOULDERED
BUSHING
MOUNT PIN
BRR15835
SHOULDERED
BUSHING
WASHER
BRR15837
MODEL BD−700−1A10 (BD−700)
Figure 2
Basic Issue: Dec 05/2016 700−71−6003
Page 12 of 20

### Page 14

C. PART B — Replacement of the Engine Rear Mount Assembly Hardware
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE DURING
OR AFTER AN ENGINE OPERATION. THE ENGINE PARTS STAY
HOT FOR APPROXIMATELY THREE HOURS AFTER THE ENGINE
STOPS. THIS CAN CAUSE INJURY TO PERSONS.
WARNING: BE CAREFUL IF YOU MUST DO WORK ON HOT COMPONENTS.
USE APPROVED GLOVES AND PROTECTIVE CLOTHING. IF YOU
DO NOT DO THIS, YOU CAN CAUSE INJURY TO PERSONS.
(1) Replace the engine rear mount assembly hardware in accordance with Rolls
Royce Service Bulletin SB−BR700−71−101975, Revision 1, dated Nov 17/16.
NOTES: 1. Lubricate the threads of the new bolts with lubricating oil.
2. Torque by the nut only.
3. Do not add running torque.
4. If any gap is not within acceptable limits, fill out an SRPSA and
send it by email at:
SRPSA@aero.bombardier.com
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 13 of 20

### Page 15

exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
SSB7124_002
SP90C4
U755245
BRR15837
BRR15836
BRR15835
KH72369
REAR LINK
KH72041
BRR15839
BRR15838
SP90C4
U755245
RING ASSEMBLY OF 
SUPPORT MOUNT
BRR21165
LEFT HAND SIDE
TYPICAL BOTH ENDS
 
MODEL BD−700−1A10 (BD−700)
Figure 3
Basic Issue: Dec 05/2016 700−71−6003
Page 14 of 20

### Page 16

exclusive property of Bombardier Inc. and
their copy or reproduction by any third party
is strictly forbidden.
Drawings and data contained herein are the
SSB7124_003
KH72369
BRR15835
BRR15836
BRR15837
SP90C4
U755245
REAR LINK
KH72041
RING ASSEMBLY OF
SUPPORT MOUNT
BRR21165
BRR15839
BRR15838
SP90C4
U755245
RIGHT HAND SIDE
TYPICAL BOTH ENDS
MODEL BD−700−1A10 (BD−700)
Figure 4
Basic Issue: Dec 05/2016 700−71−6003
Page 15 of 20

### Page 17

D. Close−out
(1) Remove all tools, equipment and unwanted materials from the aircraft.
(2) Close the cowls. Refer to AMM 71−10−00−410−801.
(3) Do the activation of the thrust reverser (for maintenance). Refer to
AMM 78−30−00−440−801.
(4) Close access door (311BB).
(5) In the flight compartment, on the EMS CDU, set the circuit breakers that follow
to IN. Refer to AMM 24−00−00−863−802.
For the left engine:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
APU APU START BATT
ENGINE L FADEC CH A BATT
ENGINE L FADEC CH B BATT
ENGINE L ENG IGN 1 BATT
ENGINE L ENG IGN 2 BATT
ENGINE L ENG FUEL HPSOV BATT
ENGINE L ENG START A BATT
ENGINE L ENG START B BATT
THRUST REVERSER L T/R CTL VALVE BATT
THRUST REVERSER L T/R UPPER LOCK BATT
THRUST REVERSER L T/R LOWER LOCK BATT
THRUST REVERSER L T/R TQA LOCK BATT
HYD HYD PUMP 1B AC 3
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 16 of 20

### Page 18

For the right engine:
SYSTEM NAME CIRCUIT BREAKER
NAME
BUS NAME
APU APU START BATT
ENGINE R FADEC CH A BATT
ENGINE R FADEC CH B BATT
ENGINE R ENG IGN 1 BATT
ENGINE R ENG IGN 2 BATT
ENGINE R ENG FUEL HPSOV BATT
ENGINE R ENG START A BATT
ENGINE R ENG START B BATT
THRUST REVERSER R T/R CTL VALVE BATT
THRUST REVERSER R T/R UPPER LOCK BATT
THRUST REVERSER R T/R LOWER LOCK BATT
THRUST REVERSER R T/R TQA LOCK BATT
HYD HYD PUMP 2B AC 2
(6) Remove the tags and close the circuit breakers that follow:
For the left engine:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
DCPC A3 L ENG FUEL SOV 130
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 17 of 20

### Page 19

For the right engine:
LOCATION CB NO. NAME ZONE
DCPC A1 FIREX CH A 130
DCPC A2 FIREX CH B 130
DCPC A4 R ENG FUEL SOV 130
(7) Remove the tags and close the circuit breakers that follow:
For the left engine:
LOCATION CB NO. NAME ZONE
CCBP H7 PITOT 1 HT A 222
CCBP F5 PITOT 1 HT B 222
CCBP F6 PITOT 3 HT 222
CCBP F4 L AOA HEAT 222
CCBP F3 TAT HT 1 222
For the right engine:
LOCATION CB NO. NAME ZONE
CCBP B1 PITOT 2 HT 222
CCBP F10 STBY PITOT HT 222
CCBP H9 R AOA HEAT A 222
CCBP F8 R AOA HEAT B 222
CCBP F9 TAT HT 2 222
E. Recording
When any PART of this Service Bulletin is completed, make an entry in the aircraft
log and send the attached Incorporation Notice to Bombardier Business Aircraft
Customer Services (BBACS).
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 18 of 20

### Page 20

In an effort to improve the quality of our technical communications, we are
requesting your feedback. Please take a moment to fill out our easy on−line Service
Bulletin survey:
http://csefeedback.aero.bombardier.com
3. MATERIAL INFORMATION
A. Kit
Kit 700K71−6003 is necessary to do this Service Bulletin and contains the parts
that follow:
NEW PART NO. QTY ITEM USED PART
NO.
INSTRUCTIONS
- DISPOSITION
KH72041 4 Bolt AS54020 Discard
KH72369 4 Bolt AS54002 Discard
SP90C4 8 Cotter Pin − −
U755245 12 Nut AS54365 Discard
NOTES: 1. In case of discrepancy between this list and the Service Bulletin Kit
Parts List contained in the respective kit, then the latter list prevails.
2. The actual quantity for some of the hardware contained in the kit can
be greater than the amount shown in the table as these items are
supplied in prepackaged quantities.
B. Parts
No parts required.
C. Material
The material that follows, or equivalent, is necessary to do this Service Bulletin.
This can be purchased from a local supplier. Bombardier Aerospace does not pay
for this consumable.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 19 of 20

### Page 21

DESCRIPTION PART
NO./NAME
SPECIFICATION QUANTITY SUPPLIER
(SEE
NOTE)
Oil,
Lubricating,
Aircraft
Turbine
Engine,
Synthetic
Base
Aeroshell/
Royco
Turbine Oil
500
Aeroshell/
Royco
Turbine Oil
560
BP or Exxon
or Eastman
Turbo Oil
2197
BP or Exxon
or Eastman
Turbo Oil
2380
Castrol Aero
5000
Mobil Jet Oil II
Mobil Jet Oil
254
MIL−PRF−23699
(TYPE II)
As Necessary Code: A
NOTES: 1. Refer to the table that follows for each suppliers address listed by
codes.
2. The Curing Time (CT), if applicable, for each consumable material is
indicated with the description of each product.
3. At time of release of this Service Bulletin, the information on the
supplier was valid and accurate. In the event that this information has
changed, the operator is encouraged to use the World Wide Web to
find a local supplier.
SUPPLIERS ADDRESSES BY CODES
Code: A
Commercially Available
D. Publications
No publications required.
MODEL BD−700−1A10 (BD−700)
Basic Issue: Dec 05/2016 700−71−6003
Page 20 of 20

### Page 22

700−71−6003 Basic Dec 05/2016
MODIFICATION — REAR MOUNT — REPLACEMENT OF RETAINING
BOLT AND NUT ON THE LOWER/UPPER ENGINE REAR MOUNT
ASSEMBLY
In an effort to improve the quality of our technical communications, we are replacing the
standard Service Bulletin Evaluation Form with an on−line Service Bulletin Survey
and we are requesting your feedback. Please take a moment to fill out our easy on−line
Service Bulletin survey at:
http://csefeedback.aero.bombardier.com
SERVICE BULLETIN EVALUATION FORM
(Your ideas will help us provide better bulletins)
SERVICE BULLETIN: ISSUE: DATED:
TITLE:

### Page 23

SERVICE BULLETIN INCORPORATION SHEET − "700−71−6003"
Upon completion of the Service Bulletin, please fill−in, fax to
(514) 855−8798 or e−mail to Fracas at fracas.montreal@aero.bombardier.com
If your aircraft is registered on CAMP and you are reporting to them,
please do not send the incorporation sheet to Bombardier. If your aircraft
is on another tracking system, please contact Bombardier to make
arrangements for automated data submission.
700−71−6003 Basic
COMPLIED WITH
YES    NO    N/A
PART A
PART B
Actual hours to accomplish Service Bulletin:
* NOTES:
Aircraft Serial No. Aircraft Reg. No.
Airframe Hours: Airframe Landings
S.B. Incorporation Date Service Order No.
Facility incorporating S.B.
Name Signature Date
BOMBARDIER
SUBMISSION
Service Bulletin
Number
Rev. * Parts
Completed
Remarks/Reason
1. Where the Service Bulletin is divided into a number of parts (e.g., PARTS A,
B, C, D, etc.) which can be carried out separately, indicate only those parts
completed at this time.
2. For repetitive checks (usually PART A) only the initial check should be
reported unless otherwise stated in the Service Bulletin.
3. When more than one part is carried out at the same time, each part should
be reported.
(dd/mm/yy)
Signature not required if sent by E−Mail (dd/mm/yy)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
