# Bombardier Service Bulletin 8-24-88

Copy: Revision A ("FAA-2013-0703_SB-8-24-88_RevA"), 26 pages: PDF https://openairdocs.org/files/sha256/b0/80/b08024db041467580785f54c2adf42b452965723f060dfbdbe7882ce914a3dff; text https://openairdocs.org/service-documents/bombardier/sb-8-24-88/file/b08024db0414.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2013-0703; AD 2016-10-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 8-24-88
- Latest revision known: 8-24-88, Revision A, dated September 23, 2014 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-8-24-88

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-10-07](https://openairdocs.org/ad/2016-10-07.md), effective Jun 23, 2016: Revision A

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-8-24-88/proposed.md).

## Text (26 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2013-0703; AD 2016-10-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

RevisionRevision ‘A’ 23 Sep 2014
D H C --- 8 ( D A S H 8 )
S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
Electrical Power - - - AC Generator Mounting Plate - - - Inspection and
Rectification - - - ModSum 8Q113009
This page transmits Revision ‘A’ of Service Bulletin 8- - -24- - -88, pages 1 thru
22, dated 23 Sep 2014.
This service bulletin is re- - -issued in its entirety for the reasons that follow:
-- the latest revision (Rev. 2) of Vendor SB 31708- - -50X- - -24- - -01 is enclosed
and the existing Vendor SB 31708- - -50X- - -24- - -01 (Rev. 1) is removed
--- I n s e r v i c e p a r t o f t h eEffectivity section is revised
WAS: 019 thru 672 NOW: 003 thru 672
--- t h eCompliance section is revised to include Transport Canada
Airworthiness Directive (AD) No. CF- - -2012- - -29
--- t h eReferences section is revised to include Transport Canada
Airworthiness Directive (AD) No. CF- - -2012- - -29 and to convey the latest
revision of the service bulletin and engineering documentation
--- t h eApproval section is revised to include new Airworthiness Limitations
(AWLs) and/or Damage T olerance Inspection (DTIs) statement
--- t h eReference section is revised to convey the latest revision of this service
bulletin and engineering documentation
--- t h eClose Out section is updated to the latest standard.
The Compliance in the previous issue of this service bulletin is not affected
by this revision. No additional rework to the aircraft is introduced by this
revision.
Remove the initial issue of Service Bulletin 8- - -24- - -88 and replace with
attached.
Previous issues of Service Bulletin 8- - -24- - -88:
Initial issue - - - Pages 1 thru 22 dated 13 Dec 2011

### Page 2

(No text on this page.)

### Page 3

D
S . B . 8 --- 2 4 --- 8 8
Page 1 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 2421 NUMBER: 8- - -24- - -88
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARL Y SIGNIFICANT AND
URGES OPERATORS TO PROMPTL Y EVALUATE THE CONTENTS
SUBJECT : Electrical Power - - - AC Generator Mounting Plate - - - Inspection and
Rectification - - - ModSum 8Q113009
1. PLANNING INFORMA TION
A. Effectivity
Aircraft Affected:
In- - -Service: DHC- - -8 Aircraft Models 102, 103, 106, 201, 202, 301, 311,
314 and 315 Serial Numbers 003 thru 672.
Production: None
Spares Affected: Yes.
Operators should check spares for existence of any AC Gen mounting adapter
kits (P/N 31708- - -500/- - -501).
The kits are subject to Inspection / replacement per enclosed GOODRICH
vendor service bulletin (VSB) 31708- - -50X- - -24- - -01.

### Page 4

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 2 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
The following is a list of spares affected by this change. Review spares and
procurement systems to determine the existence of any listed parts. See
Paragraph 2.D., Existing Parts Accountability, for disposition.
Part Number Description
31708- - -501 AC Generator Mounting Adapter Kit
31708- - -500 AC Generator Mounting Adapter Kit
B. Reason
Problem: In- - -Service reports indicate that corrosion has formed around some studs
on the AC Generator Mounting Adaptor p/n 31708- - -500 / & - - -501.
Any corrosion that may form around an AC Generator Mounting adaptor
Stud(s) could cause an oil leak around AC Generator.
For additional information refer to the PLANNING INFORMATION section
in enclosed VSB 31708- - -50X- - -24- - -01.
Solution: This service bulletin introduces ModSum 8Q113009. The ModSum
introduces new AC Generator Mounting Adaptor p/n’s 31708- - -511 and
31708- - -510 as replacement for existing p/n’s 31708- - -501 / or - - -500.
Visual and mechanical inspections are done to verify if the mounting
adapter kit (p/n 31708- - -500 / or - - -501) can continue in service or must be
replaced per ModSum 8Q113009.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- - - aircraft electrical power is removed
- - - the nose landing gear lock is engaged
- - - the main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- - - work stands / ladders are set- - -up under the right and / or left nacelle to gain access
to existing AC Generator
- - - the AC Generator attached to each engine is located and carefully removed

### Page 5

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 3 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
- - - the related AC Generator mounting adaptor is removed and cleaned
- - - a visual and mechanical inspection of the mounting adapter (p/n 31708- - -500 /
- - -501) is accomplished to determine serviceability per enclosed Goodrich VSB.
Depending on results it may be necessary to replace the existing mounting adaptor
with p/n 31708- - -510 / - - -511
- - - a serviceable or new mounting adaptor and AC generator are installed
- - - an operational check is done to ensure correct operation
- - - a leak check is done to ensure correct installation
- - - close out.
D. Compliance
Bombardier Inc. recommends incorpora tion of ModSum 8Q113009 at the earliest
opportunity unless otherwise directed by the operator’s airworthiness authority.
Refer to the Compliance section in enclosed VSB 31708- - -50X- - -24- - -01 for
additional information.
Transport Canada Airworthiness Directive CF- - -2012- - -29 has been issued.
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
O r g a n i z a t i o n N o : D A O # 9 3 --- Q --- 0 2 .
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
T olerance Inspections (DTIs).
F. M a n p o w e r
It will take an estimated 5 man- - -hours to complete this service bulletin. The
breakdown of the man- - -hours is shown in the table that follows:

### Page 6

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 4 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
TASK M A N --- H O U R S
J o b S e t --- U p 0.50
P r o c e d u r e --- P a r t A
P r o c e d u r e --- P a r t B
P r o c e d u r e --- P a r t C
P r o c e d u r e --- P a r t D
0.50
1.50
0.50
1.50
Close- - -Out 0.50
For any on- - -site labor assistance, please speak with a Fleet Services representative for
a quote. The Fleet Services group can be contacted via the Q Series T echnical Help
Desk by telephone at 416- - -375- - -4000 or email at: thd.qseries@aero.bombardier.com
G. Material - - - Price and Availability
The ModKit(s) required to do this service bulletin are listed in the table below:
Operators should submit a purchase orde r through the Customer Accounts Service
T eam (CAST) at Bombardier Aerospace Regional Aircraft division specifying aircraft
serial number(s) to:
Bombardier Aerospace
Customer Accounts Services T eam (Mail Stop N11- - -32)
123 Garratt Blvd.
To r o n t o
Ontario
Canada M3K- - -1Y5
Facsimile: (416) 375- - -3060
T elephone : (416) 375- - -3920
Facsimile:
International: (416) 375- - -3334
European: (416) 373- - -5966
Americas East: (416) 373- - -5964
Americas West: (416) 373- - -5965
T elephone:
International: (416) 375- - -3706
European: (416) 373- - -3704
Americas East: (416) 375- - -3700
Americas West: (416) 373- - -5888

### Page 7

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 5 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
E- - -mail addresses:
International: cast.international@aero.bombardier.com
European: cast.europe@aero.bombardier.com
Americas East: cast.americaseast@aero.bombardier.com
Americas West: cast.americaswest@aero.bombardier.com
Kit Number Description
8MK4650- - -001
(see NOTE 1 below)
R e t r o f i t K i t --- E n g i n e B u i l d --- A C
Generator Rework
8MK4650- - -003
(see NOTE 2 below)
R e t r o f i t K i t --- E n g i n e B u i l d --- A C
Generator Rework
NOTE 1: This kit replaces 31708- - -500. It is used on AC Generators 31708- - -000,
- - -000A,- - -001 and - - -001A.
NOTE 2: This kit replaces 31708- - -501. It is used on AC Generators 31708- - -002,
- - -002A, - - -003 and - - -003A.
H. T ooling - - - Price and Availability
For T ooling refer to the T ooling and Material Requirements section in enclosed
VSB 31708- - -50X- - -24- - -01
I. Weight and Balance
None
J. Electrical Load Data
Not affected
K. Publications Affected
Modifications Manual PSM 1- - -813- - -12...............................
Dash 8 Illustrated Parts Catalogue PSM 1- - -8- - -4 and....................
P S M 1 --- 8 2 --- 4 a n d
P S M 1 --- 8 3 --- 4

### Page 8

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 6 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
L. References
Revision ‘A’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8MK4650 1 ---
8Z9381 1 ---
ModSum 8Q113009 Rev. ‘B’
PCA 6743 Revision 1 (for internal reference only)
Transport Canada Airworthiness Directive (AD) CF- - -2012- - -29
2. MATERIAL INFORMA TION
A. Parts Required Per Aircraft
(1) Modification Kit 8MK4650- - -001 and - - -003
(2) Detailed Kit Content:
Quantity Per Kit
--- 0 0 3 --- 0 0 1
Part Number Description Remarks
1 31708- - -511 Mounting, Adaptor
Kit
1 31708- - -510 Mounting, Adaptor
Kit

### Page 9

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 7 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
(3) In addition to the above part(s), the following material(s) are required for the
completion of this service bulletin and may be procured as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources.
NOTE: O- - -Rings listed below are for one side only.
Part Number Qty. Per Aircraft Description Remarks
AS3209- - -014 2 P a c k i n g , O --- R i n g*M83248/1- - -014
AS3209- - -114 2 P a c k i n g , O --- R i n g*M83248/1- - -114
AS3209- - -210 1 P a c k i n g , O --- R i n g*M83248/1- - -210
AS3209- - -241 1 P a c k i n g , O --- R i n g*M83248/1- - -241
* alternate part number
B. Parts Required to Modify Spares
None
C. Special T ools and Equipment Required
None
D. Existing Parts Accountability
The following parts may be affected by this service bulletin. Indented parts are
components of the next higher assembly. The quantity (Qty.) column lists the
quantity that may be affected per aircraft for non- - -indented parts and the quantity
p e rn e x th i g h e ra s s e m b l yf o ri n d e n t e dp a r t s .

### Page 10

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 8 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
Existing
Part Number Description Qty. IC DC
New Part
Number PNC
31708- - -500 AC Generator
Mounting Adap-
tor
1* C DIS 31708- - -510 S
31708- - -501 AC Generator
Mounting Adap-
tor
1* C DIS 31708- - -511 S
* One adaptor per engine (if required
IC Interchangeability Code
A Not interchangeable.
B Removed Part. No direct replacement.
C Conditionally Interchangeable. Inst allation of superseded part negates the
intent of this service bulletin.
DC Disposition
DIS Discard Part if unserviceable
MUI Multiple Usage Item: Return to stock if serviceable.
RWK Rework existing part in accordance with this service bulletin.
RWI Rework existing part per .....
SAL Salvage. Return to operator’s stores for salvage consideration.
PNC Part Number Code
N No equivalent Bombardier Inc. part number for reworked part. Indicate
on part that this service bulletin has been accomplished.
R Part number after rework.
S Superseding part number.
X Reworked part and superseding part are functionally and physically
equivalent but not identical.

### Page 11

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 9 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
3. ACCOMPLISHMENT INSTRUCTIONS
NOTE: The rework that follows applies to AC Generators p/n 31708- - -000, - - -001,
- - -002, - - -003 and p/n 31708- - -000A, - - -001A, - - -002A & - - -003A.
NOTE: Rework is not required if mounting adaptor kit p/n 31708- - -500 or - - -501
has been previously replaced by new mounting adaptor kit p/n
31708- - -510 and/or - - -511.
A . J o b S e t --- U p
(1) Placard and select all aircraft electrical power to OFF . Obey all relevant
WARNINGS and CAUTIONS detailed in Maintenance Manual PSM 1- - -8- - -2,
1 --- 8 2 --- 2 o r 1 --- 8 3 --- 2 C h a p t e r 1 2 a n d 2 4 .
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Set up the work platforms or ladders around / under the right and / or left nacelle
to gain access to existing AC Generator. Make sure that the work platforms or
ladders are electrically grounded.
(5) Open and latch the left cowl (No.1 and / or No.2 nacelle) and locate the AC
Generator.
B. Procedure
PART A - - - Removal of AC Generator Mounting Adaptor 31708- - - 500 and/or- - - 501:
(1) Remove the AC generator and mounting adaptor (31708- - -500 and/or - - -501)
from the reduction gearbox. For 100/300 series aircraft refer to applicable
instructions in AMM Chapter 24- - -21- - -00 or 24- - -21- - -01 or for 200 series aircraft
refer to AMM TASK 24- - -21- - -00- - -000- - -802. Keep the hardware.
(a) Make sure to put a protective cover on the electrical connectors, tube
assemblies and AC generator drive pad on the RGB.
(b) Remove and discard O- - -rings from transfer tubes, the AC generator and the
generator splined shaft.

### Page 12

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 10 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
(2) Clean the AC generator mounting adaptor 31708- - -500 and/or - - -501.
PART B - - - Inspection of AC Generator Mounting Adaptor 31708- - - 500 and/or- - - 501:
(1) Do a “Visual and Mechanical Inspection” of the removed AC generator mounting
adaptor 31708- - -500 and/or - - -501 to agree with all of the details provided in
enclosed Goodrich VSB 31708- - -50X- - -24- - -01.
(a) If each mounting adaptor p/n 31708- - -500 and / or - - -501 “passes” the
inspections given in VSB 31708- - -50X- - -24- - -01 then replacement is not
required. Refer to PART D - - - Installation
(b) If each mounting adaptor p/n 31708- - -500 or - - -501 “fails” any of the
inspections given in the VSB then replacement with new mounting adaptor
p/n 31708- - -510 and / or - - -511 is required (refer to PART C below).
P A R T C ---Rectification:
(1) Discard an unserviceable AC generator mounting adaptor 31708- - -500 and/or
- - -501, and install a serviceable replacement (refer to PART D below).
PART D - - - AC Generator Mounting Adaptor Installation:
(1) Install a serviceable AC generator mounting adaptor 31708- - -500 and/or - - -501 or
new mounting adaptor p/n 31708- - -510 and/or - - -511 (ModSum 8Q113009).
For 100/300 series aircraft refer to AMM Chapter 24- - -21- - -00 or 24- - -21- - -01.
For 200 series aircraft refer to AMM TASK 24- - -21- - -00- - -400- - -802.
(2) Do an operational test of the AC generation system.
For 100/300 series aircraft refer to AMM Chapter 24- - -21- - -00 or 24- - -21- - -01.
For 200 series aircraft refer to AMM TASK 24- - -21- - -00- - -710- - -801.
(a) Before starting the engines make sure to remove all tools, equipment and all
unwanted materials from the work area and make sure to close the left cowl
(No.1 and / or No.2 nacelle).
(3) Make sure to do a “leak check” to ensure correct installation of the AC Gen and
mounting adaptor.

### Page 13

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 11 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum make an entry that conforms to local
regulatory requirements in the applic able logbook(s). If only part of this
ModSum is completed, use only this service bulletin number as reference and
detail exact limit of work completed. Enter component serial numbers if
applicable. Enter this ModSum number only after complete and functional
incorporation of all work defined in this service bulletin

### Page 14 (OCR)

SERVICE BULLETIN 8-24-88
GOODRICH
LETTER OF TRANSMITTAL
TO: HOLDERS OF SERVICE BULLETIN 31708-50X-24-01 TITLED:
ELECTRICAL POWER - AC GENERATOR
CHECK AND REPLACEMENT OF THE MOUNTING ADAPTER KIT
REVISION 2 DATED Dec 20, 2012
HIGHLIGHTS
This page transmits Revision 2 of Service Bulletin 31708-50X-24-01 in its entirety. Discard all  previously released copies of Service Bulletin 31708-50X-24-01.  Refer to hips://techpubs.goodnch com to confirm the latest revaion standard
Page(s)  Paragraph / Figure  Description
2  1.E.  Changed a statement in the Compliance section to give a more
defined replacement interval.  Distributed via the Gooorich Technical Publicatons Web Portal.
THESE COMMODITIES, SOFTWARE, OR TECHNOLOGY WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH
THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW IS PROHIBITED.
THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO GOODRICH CORPORATION AND IS FURNISHED UPON THE EXPRESS
ONDITION THAT THE INFORMATION CONTAINED HEREIN WILL NOT BE USED DIRECTLY OR INDIRECTLY IN ANY WA
ETRIMENTAL TO THE INTEREST OF GOODRICH CORPORATION
31708-50X-24-01
Page 1 of 1
© 2012 Goodrich Corporation  Dec 20/12
13 Dec 2011  S.B. 8-24-88
Page 12 of 22
Revision 'A' 23 Sep 2014  PM

### Page 15 (OCR)

SERVICE BULLETIN 8-24-88
GOODRICH
SERVICE BULLETIN
Number 31708-50X-24-01
ELECTRICAL POWER - AC GENERATOR
CHECK AND REPLACEMENT OF THE MOUNTING ADAPTER KIT
THESE COMMODITIES, SOFTWARE, OR TECHNOLOGY WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH
THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW IS PROHIBITED.
CONDITION THAT THE IN ORATION CONTAINED HEREIN ODD NOT BE CORD DIRECTLY OR INDIRECTINY WRESS
DETRIMENTAL TO THE INTEREST OF GOODRICH CORPORATION.
1.  PLANNING INFORMATION
A. Effectivity
This Service Bulletin (SB) applies to Goodrich Corporation mounting adapter kit
(P/N 31708-500/-501).
NOTE: The mounting adapter kit (P/N 31708-500/-501) is used on aircraft that use  Rofer to hitos //techpubs.goodnch com to confirm tho lates?
the 31708 Series (31708-000, -000A, -001, -001A, -002, -002A, -003, ano
-003A) AC Generator.  Distributed via the Goodnch Tochnical Publications
NOTE: Do not do this SB if the mounting adapter kit (P/N 31708-500/-501) has been
replaced by the new mounting adapter kit (P/N 31708-510/-511).
B. Concurrent Requirements
None.
C. Reason
The mounting adapter plate (P/N 31708-1020/-1021), which is part of the mounting
adapter kit (P/N 31708-500/-501) could have corrosion in the magnesium threads at
the threaded interface with the studs. Since some possible corrosion cannot be seen,
a date of manufacture and inspection on the kit will be used to determine when you
need to replace the kit with a new mounting adapter kit (P/N 31708-510/-511).
D. Description
This SB gives instructions to inspect the mounting adapter kit (P/N 31708-500/-501).
Visual and mechanical inspections are done to verify if the mounting adapter kit can
continue in service. The part will be marked with a unique identification number for
tracking by the operator after inspection if it is returned to service.
31708-50X-24-01
Rev. 2  Page 1 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 13 of 22  PM

### Page 16 (OCR)

SERVICE BULLETIN 8-24-88
THIS DOCUMENT SUBJECT TO THE
CONTROLS AND RESTRICTIONS ON
GOODRICH
SERVICE BULLETIN
E. Compliance
tis highly recommended that operators complete this SB at their earliest convenience,
unless directed otherwise by their local airworthiness authority
Goodrich Corporation requires these checks be done every 6,000 flight hours (FH)
from the issue date of this SB and when the AC Generator is next removed for service.
The mounting adapter kit (P/N 31708-500/-501) older than 10 years must be replaced
within 1 year or 2000 FH, whichever comes first, from the inspection per this SB. The
Refer to hitps:/techpubs.goodrich.com to confir the latest revision standa:  Distrbuted via the Goodrich Technical Publications Web Portal.  checks in this SB are required until replaced with a new mounting adapter kit (P/N
31708-510/-511). The mounting adapter kit (P/N 31708-500/-501) must be inspected
to verify if the mounting adapter kit can continue in service.
F. Approval
This SB has the approval of Goodrich Corporation. Repairs and modifications
specified in this SB are in compliance with the approved data and applicable Federal
Aviation Regulations and EASA regulations.
The technical content of this SB has been reviewed and accepted by Bombardier
Aerospace.
G. Manpower
(1) When the mounting adapter kit is removed, an estimated 0.2 man-hours are
necessary to do the Visual Inspection as shown in Paragraph 3.D. (1).
(2)  When the mounting adapter kit is removed, an estimated 0.4 man-hours are
necessary to do the Mechanical Inspection as shown in Paragraph 3.D. (2).
H. Weight and Balance
Effect on weight:  None
Effect on overhung moment:  None
I. Electrical Load Data
Not Changed.
J. References
Refer to the 31708 Series Component Maintenance Manual (CMM) with Illustrated
Parts List (IPL), ATA 24-20-53.
Refer to Aircraft Maintenance Manual (AMM) Chapter 24.
K. Other Publications Affected
None.
31708-50X-24-01
Rev. 2  Page 2 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 14 of 22  PM

### Page 17 (OCR)

SERVICE BULLETIN 8-24-88
THIS DOCUMENT SUBJECT TO THE
CONTROLS AND RESTRICTIONS ON
GOODRICH
SERVICE BULLETIN
2. MATERIAL INFORMATION
A. Material - Price and Availability
Replacement mounting adapter kit 31708-510/-511 is available from Bombardier
Aerospace spares.
B. Technical Support Information
Technical questions should be directed to the location listed below:
ADDRESS  COMMUNICATIONS
Goodrich Corporation  PHONE (1) 330 487 2000
Technical Services  FAX  (1) 330 487 1902
8380 Darrow Road  Twinsburg, OH 44087  EMAIL  twinsburg.techservice@goodrich.com  Distributed via the Goodrich Technical Publications Web Portal
USA
Goodrich Control Systems  PHONE  (44) 1296 663000
Power Systems Division  FAX  (44) 1296 663334
Westfield Road
Pitstone Green
Buckinghamshire LU7 9GT
UK
C. Tooling and Material Requirements
In addition to standard shop tools, the following tools are required to do the pull test:
Part Number  Nomenclature  Qty.  Vendor
MS21042-5  Nut, Self-locking  1  Commercially Available
AN960-516, or  Washer, Flat  4  Commercially Available
AN960-516L  8
Table 1 - Special Tools
Item  Description/Specification  Source (CAGE Code)
7132 White  White Marking Compound  Markem Corporation
White Ink  150 Congress Street
PO Box 2100
Keene, NH 03431 US
Ph: 800-258-5356
Fax: 603-357-1835
Number stamping set  Approximately 1/8 incl  Commercially available
3,12 mm) vertica
Table 2 - Special Materials
31708-50X-24-01
Rev. 2  Page 3 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 15 of 22  PM

### Page 18 (OCR)

SERVICE BULLETIN 8-24-88
THIS DOCUMENT SUBJECT TO THE
CONTROLS AND RESTRICTIONS ON
202 2 1801 462.  GOODRICH
SERVICE BULLETIN
D. Replacement Parts Requirements
The following parts are replacements to replace the mounting adapter kit:
New Part Number  Qty.  Nomenclature  Old Part  Number  Instruction/  Disposition
31708-510  KIT, Mounting Adapter  31708-500  Replace/Discard
Refer to htips echouds  Distributed vie the Goodrich  NOTE: Mounting adapter kit used on AC generators 31708-000, -000A, -001, and -001A.  Table 3 - Replacement Parts for 31708-500 Mounting Adapter Kit
New Part Number  Qty.  Nomenclature  Old Part  Number  Instruction/  Disposition
31708-511  KIT, Mounting Adapter  31708-501  Replace/Discard
NOTE:  Mounting adapter kit used on AC generators 31708-002, -002A, -003, and -003A.
Table 4 - Replacement Parts for 31708-501 Mounting Adapter Kit
3. ACCOMPLISHMENT INSTRUCTIONS
This SB gives instructions to inspect the mounting adapter kit (P/N 31708-500/-501)
Visual and mechanical inspections are done to verify if the mounting adapter kit car
continue in service.
A. Preparation
Do the work in a clean, dry area free of oil, dirt, moisture, and other contamination.
The mounting adapter kit (P/N 31708-500/-501) must be kept clean to ensure proper
operating effectiveness.
B. Disassembly
Remove the mounting adapter kit (P/N 31708-500/-501) from the aircraft in
evision standard  C. Cleaning  accordance with the instructions given in the Aircraft Maintenance Manual (AMM).
Clean mounting adapter kit (P/N 31708-500/-501) according to the CLEANING section
instructions of the referenced CMM.
D. Inspection
Visual inspections of the mounting adapter kit (P/N 31708-500/-501) are required. If
the mounting adapter kit passes the visual inspection, then proceed to mechanical
inspection.
(1) Visual Inspection:
(a) Check if the mounting adapter kit is older than 11 years from the original
date of manufacture. See Figure 1.
1 The date of manufacture is listed after the part number.
31708-50X-24-01
Rev. 2  Page 4 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Page 16 of 22
Revision 'A' 23 Sep 2014  PM

### Page 19 (OCR)

SERVICE BULLETIN 8-24-88
THIE DOCUMENT SUBJECT TO THE
CONTROLS AND RESTRICTIONS ON
THE FIRST PAGE.  GOODRICH
SERVICE BULLETIN
The Goodrich Corporation CAGE code is shown before the part
number "31708-500" or "31708-501".  ". The CAGE code can be
marked as "31435" or "K4358".
• The date of manutacture is listed with two digits for the month and
wo digits for the year (Example: "01-89" for January 1989).
REPLACE the mounting adapter kit (P/N 31708-500/-501) if the
mounting adapter kit is older than 11 years from the original date of
manufacture.
EXAMPLE: If the mounting adapter kit was manufactured in January
2003, then it must be replaced before January 2014.
REPLACE the mounting adapter kit (P/N 31708-500/-501) if there is  no date of manufacture shown.  Distributed via the Goodrich Technical Publicatons Web Portal  Refer to httos: /echpubs coodnch com to contim the latest revisor
(b)  Check if there are signs of damage or corrosion on the mounting adapter
kit (P/N 31708-500/-501).
1 REPLACE the mounting adapter kit (P/N 31708-500/-501) if there are
signs of damage or corrosion.
(2) Mechanical Inspection:
NOTE: Only do the mechanical inspection when all visual inspections are
passed.
(a)  Check if there are loose studs on the mounting adapter kit (P/N
31708-500/-501).
• REPLACE the mounting adapter kit (P/N 31708-500/-501) if you car
move the studs in any direction with your finger.
(b)  Do a pull test to check the mounting adapter kit (P/N 31708-500/-501)
studs. See Figure 2.
1  Measure the distance from the top of one stud to the flat face of the
mounting adapter kit.
a Record this distance as the protruding stud height.
Put the mounting adapter kit in a soft jaw vice. Make sure the mounting
adapter kit is secured in place.
Put four flat washers (P/N AN960-516) or eight flat washers (P/N
AN960-516L) on one of the studs.
4  Put one self-locking nut (P/N MS21042-5) on top of the flat washers.
5  Tighten the self-locking nut to a torque of 130 to 150 Ibf.in. (14,7 to
16,9 N- m).
31708-50X-24-01
Rev. 2  Page 5 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 17 of 22  PM

### Page 20 (OCR)

SERVICE BULLETIN 8-24-88
THIS DOCUMENT SUBJECT TO THE
CONJKOLS ANL KESIRJCILONS ON
GOODRICH
SERVICE BULLETIN
6 Remove the self-locking nut (P/N MS21042-5) and flat washers (P/N
AN960-516 or P/N AN960-516L) from the stud.
7 Remove the mounting adapter kit from the soft jaw vice.
8 Measure the distance from the top of the tested stud to the flat face of
the mounting adapter kit.
Refer to https://techpubs goodrich.com to confirm the latest revision standard  Distributed via the Goodrich Technical Publications Web Portal.  a REPLACE the mounting adapter kit if the stud height has  increased more than 0.001 inch (0,025 mm) from the original
measurement of the protruding stud height.
b  REPLACE the mounting adapter kit if the stud has broken.
CHECK to determine if the stud is loose. REPLACE the mounting
adapter kit if the stud is loose.
(c)  Repeat paragraph 3.D. (2)(b)1 thru 3.D. (2)(b)8 for each of the four studs.
(d)  Discard the self-locking nut (P/N MS21042-5), flat washers (P/N
AN960-516) or eight flat washers (P/N AN960-516L) after the mechanical
inspection is done.
(3)  Identify the mounting adapter kit with a unique identifier if it passes inspection
in paragraph 3.D
(a)  Clean the surface area of the mounting adapter kit at the location as shown
in Figure 3. Refer to the CLEANING section of the reference CMM.
(b)  Use white ink and the numerical stamp set listed in Table 2 to mark the
unique identifier at the location as shown in Figure 3. Mark the number on
two lines, one line with date and the line below with the aircraft number
and engine position.
NOTE: The number is based on the date of inspection, Bombardier's
aircraft manufacturer's serial number, and engine position on the
EXAMPLE: If this SB inspection was done on January 15, 2012 (MMDDYY)
on Bombardier manufacturer's number 456 (ACRF), for the starboard
position (P- starboard side = 1 and port side = 2) of the aircraft, the unique
identifier would be:
MMDDYY
011512
4561
ACRFP
(c)  Record the unique identifier with the aircraft log for tracking of the required
SB compliance for replacement.
31708-50X-24-01
Rev. 2  Page 6 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 18 of 22  PM

### Page 21 (OCR)

SERVICE BULLETIN 8-24-88
GOODRICH
SERVICE BULLETIN
- CAGE CODE, PART NUMBER  AND DATE CODE (Jan. 1989)  the latest revision standard
EXAMPLE:
31435-31708-500-01-89
OR
31435-31708-501-01-89  OR  tions Web Portal.
K4358-31708-500-01-89
OR
K4358-31708-501-01-80
to confirm
ich.com
Figure 1 - Location of CAGE Code, Part Number and Date on the Mounting Adapter Kit  Refer to httos://techoubs.cood
Distributed via the
31708-50X-24-01
Rev. 2  Page 7 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Revision 'A' 23 Sep 2014  Page 19 of 22  PM

### Page 22 (OCR)

SERVICE BULLETIN 8-24-88
THIS DOCUNENT SUBJECT TO THE
ONTROLS AND RESTRICTIORS ON
THE PIRST PACE.  GOODRICH
SERVICE BULLETIN
- PROTRUDING STUD HEIGHT
Refer to https://techpubs.goodrich.com to confirm the latest revision standard.  Distributed via the Goodrich Technical Publications Web Portal.  ONE SELF-LOCKING NUT
(PIN M521042-5)
FOUR FLAT WASHERS
(P/NAN960-516) OR
EIGHT FLAT WASHERS
(P/N AN960-516L)
Figure 2 - Pull Test
31708-50X-24-01
Rev. 2  Page 8 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Page 20 of 22
Revision 'A' 23 Sep 2014  PM

### Page 23 (OCR)

SERVICE BULLETIN 8-24-88
THE PIRAT PACE.  GOODRICH
SERVICE BULLETIN
- CAGE CODE, PART NUMBER  Refer to https://techpubs.goodrich.com to confirm the latest revision standarc
AND DATE CODE (JAN. 1989)
LOCATION FOR UNIQUE  Distributed via the Goodrich Technical Publications Web Portal.
IDENTIFICATION NUMBER
ON TWO ROWS
Figure 3 - Put Unique Identifier on Serviceable Mounting Adapter Kit
31708-50X-24-01
Rev. 2  Page 9 of 9
Dec 20/12  © 2012 Goodrich Corporation  Jul 15/11
13 Dec 2011  S.B. 8-24-88
Page 21 of 22
Revision 'A' 23 Sep 2014  PM

### Page 24

S E R V I C E B U L L E T I N 8 --- 2 4 --- 8 8
S . B . 8 --- 2 4 --- 8 8
Page 22 of 22
13 Dec 2011
PMRevision ‘A’ 23 Sep 2014
This Page Intentionally Blank
1

### Page 25

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 26

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
