# Bombardier Service Bulletin 84-26-16

Copy: Revision A ("SB 84-26-16 RevA"), 12 pages: PDF https://openairdocs.org/files/sha256/3d/07/3d073dd2a13421f31be7f4cd9cc55bd9e704719e4b85e37cc52802496a68f783; text https://openairdocs.org/service-documents/bombardier/sb-84-26-16/file/3d073dd2a134.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0518; AD 2017-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-26-16
- Latest revision known: 84-26-16, Revision A, dated February 12, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-26-16

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-20-07](https://openairdocs.org/ad/2017-20-07.md), effective Nov 6, 2017: Revision A

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-26-16/proposed.md).

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2017-0518; AD 2017-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Revision ‘A’ 12 Feb 2016
D H C --- 8 ( D A S H 8 )
S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
Fire Protection - - - Retrofit/Rework - - - Decrease of Control Amplifier to
Squib Signal Line Circuit Breaker Rating Address the Inadvertent
Discharge of Multiple Bottles - - - Modsum 4- - - 126617
This page transmits Revision ‘A’ of Service Bulletin 84- - -26- - -16, pages 1 thru
8, dated 12 Feb 2016
This service bulletin is re- - -issued in its entirety for the reasons that follow:
--- t h eReferences section is revised to convey the latest revision of the service
bulletin and engineering documentation
--- t h eProcedure section is revised to correct a typo
The Compliance in the previous issue of this service bulletin is not affected
by this revision. No additional rework to the aircraft is introduced by this
revision.
Remove the initial issue of Service Bulletin 84- - -26- - -16 and replace with
attached.
Previous issue(s) of Service Bulletin 84- - -26- - -16:
Initial issue - - - Pages 1 thru 8 dated 14 Aug 2015

### Page 2

(No text on this page.)

### Page 3

D
S . B . 8 4 --- 2 6 --- 1 6
Page 1 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 2600 NUMBER: 84- - -26- - -16
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARL Y SIGNIFICANT AND
URGE OPERATORS TO PROMPTL Y EVALUATE THE CONTENTS
SUBJECT : Fire Protection - - - Retrofit/Rework - - - Decrease of Control Amplifier to
Squib Signal Line Circuit Breaker Rating Address the Inadvertent
Discharge of Multiple Bottles - - - Modsum 4- - - 126617
1. PLANNING INFORMA TION
A. Effectivity
Aircraft Affected:
In- - -Service: DHC- - -8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003 thru 4504.
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None

### Page 4

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 2 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
B. Reason
Problem: An operator reported having a false SMOKE warning light for the Aft
Baggage Compartment which caused them to discharge the fire
extinguishing bottle. Subsequently to this engine and APU fire warning
lights indicated. Engine #1, Engine #2, and APU bottles all discharged.
A Kidde Aerospace report showed the failure on the circuit board within the
control amplifier. There was burnt trace and pins on connector 2600- - -P2.
Kidde Aerospace and Defense has identified that there is a potential that
if there is an external short to the control amplifier, this will cause the circuit
to burn out and short on other squib discharge lines.
Solution: This service bulletin provides ins tructions to change the current 7.5 circuit
breakers to a lower current rating to prevent damage to squib discharge
circuits and power being provided to other lines.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- - - aircraft electrical power is removed
- - - the nose landing gear lock is engaged
- - - the main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- - - two circuit breakers on the right 28VDC circuit breaker panel are replaced
- - - close out.
D. Compliance
Bombardier Inc. highly recommend incorporation of ModSum 4- - -126617 at the
earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
A Transport Canada Airworthiness Directive is pending.
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
O r g a n i z a t i o n N o : D A O # 9 3 --- Q --- 0 2 .
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
T olerance Inspections (DTIs).

### Page 5

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 3 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
F. M a n p o w e r
It will take an estimated 3.00 man- - -hours to complete this service bulletin. The
breakdown of the man- - -hours is shown in the table that follows:
TASK M A N --- H O U R S
J o b S e t --- U p 0.25
Procedure 1.00
T e s t/R T S 1.50
Close- - -Out 0.25
For any on- - -site labor assistance, please contact a Fleet Services representative for a
quote. The Fleet Services group can be contacted via the Q Series T echnical Help
Desk by telephone at 416- - -375- - -4000 or email at: thd.qseries@aero.bombardier.com
G. Material - - - Price and Availability
The part(s) and material(s) detailed in Paragraph 2.A. may be either furnished or
fabricated from the operator’s existing stock, purchased as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources. DK parts are to be manufactured and approved locally (refer to disclaimer
in the related text or illustration). In some cases, an equivalent to the DK part may
be available from Bombardier under the production part number shown as
reference in Parts Required Per Aircraft.
DKs necessary to do this service bulletin can be requested by writing to the
following e- - -mail address:
qseriesdwgrequest@aero.bombardier.com
Follow the instructions as per All Operator Messages (AOM) 914 (Q100/200/300)
or 389 (Q400).
H. T ooling - - - Price and Availability
None
I. Weight and Balance
None
J. Electrical Load Data
Not affected

### Page 6

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 4 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
K. Publications Affected
Aircraft Illustrated Parts Catalog PSM 1- - -84- - -4......................
ModSums Manual PSM 1- - -84- - -12..................................
L. References
Revision ‘A’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8DK4259 1 A
ModSum 4Q126617 Rev. ‘E’
ModSum 4- - -126617 Rev. ‘E’
PCA 45082 Revision 0 (for internal reference only)
A Transport Canada Airworthiness Directive is pending.
2. MATERIAL INFORMA TION
A. Parts Required Per Aircraft
(1) Detailed Parts List:
Quantity
Per Aircraft
Part Number Description Remarks
2 MS3320- - -1 Circuit Breaker 1Amp
B. Parts Required to Modify Spares
None
C. Special T ools and Equipment Required
None

### Page 7

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 5 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
A . J o b S e t --- U p
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU DO
NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALL Y RETRACT .
THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE
EQUIPMENT .
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS
CAN ACCIDENTALL Y CLOSE THE LANDING GEAR DOORS. THIS CAN
CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT .
(1) Placard and select all aircraft electrical power to OFF . Obey all relevant
W A R N I N G S a n d C A U T I O N S ( r e f e r t o A M M T A S K ’ S 2 4 --- 0 0 --- 0 0 --- 8 6 1 --- 8 0 2 a n d
24- - -00- - -00- - -910- - -801).
B. Procedure
(1) Remove the right 28VDC circuit breaker panel, refer to AMM T ask
24- - -61- - -01- - -000- - -802.
(2) Remove two existing 7.5amp circuit breakers at the following locations and
replace with 1amp circuit breaker MS3320- - -1(Figure 1):
( a ) F 2- - -F I R EE X TC O N TA M P1&2E N G .
(b) G2 - - - FIRE EXT CONT AMP CARGO.
(3) Re- - -torque the electrical attachment screws of the circuit breakers to 15 - - - 18
inch pounds.
(4) T orque circuit breakers mounting nuts to 25 inch pounds.
(5) Re- - -identify the panel beside the part number location as 8DK4259, refer to
AMM T ask 20- - -00- - -01- - -910- - -801.
(6) Install the right 28VDC circuit breaker panel, refer to AMM T ask
24- - -61- - -01- - -400- - -802.

### Page 8

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 6 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
(7) Do the following return to service procedures:
( a ) A M M Ta s k 2 6 --- 1 1 --- 0 0 --- 7 1 0 --- 8 0 1 --- O p e r a t i o n a l Te s t o f t h e N a c e l l e F i r e
Detection System.
( b ) A M M Ta s k 2 6 --- 1 3 --- 0 0 --- 7 1 0 --- 8 0 1 --- O p e r a t i o n a l Te s t o f t h e A P U F i r e
Detection System.
( c ) A M M Ta s k 2 6 --- 2 1 --- 0 0 --- 7 2 0 --- 8 0 1 --- F u n c t i o n a l Te s t o f t h e N a c e l l e F i r e
Extinguishing System.
( d ) A M M Ta s k 2 6 --- 2 3 --- 0 0 --- 7 2 0 --- 8 0 1 --- F u n c t i o n a l Te s t o f t h e A P U F i r e
Extinguishing System.
( e ) A M M Ta s k 2 6 --- 2 2 --- 0 0 --- 7 2 0 --- 8 0 1 --- F u n c t i o n a l Te s t o f t h e B a g g a g e F i r e
Extinguishing System.
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 9

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 7 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
Circuit Breakers Location on 28VDC Right C/B Panel
Figure 1
PANEL
8DK4259
REMOVE EXISTING 7.5AMP C/B AND REPLACE WITH 1AMP C/B
AT THESE LOCATIONS

### Page 10

S E R V I C E B U L L E T I N 8 4 --- 2 6 --- 1 6
S . B . 8 4 --- 2 6 --- 1 6
Page 8 of 8
14 Aug 2015
Revision ‘A’ 12 Feb 2016 JR
This Page Intentionally Blank.
1

### Page 11

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 12

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
