# Bombardier Service Bulletin 84-28-10

Copy: SB 84-28-10 RB ("SB 84-28-10 RB"), 12 pages: PDF https://openairdocs.org/files/sha256/c6/18/c61808d0a1ff6ce8a4f8f04da51460895747d2dd485b04a11c5b0a06657d3c88; text https://openairdocs.org/service-documents/bombardier/sb-84-28-10/file/c61808d0a1ff.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-28-10
- Latest revision known: 84-28-10, Revision B, dated March 19, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-28-10

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-17-25](https://openairdocs.org/ad/2015-17-25.md), effective Oct 7, 2015: Revisions A and B

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-28-10/proposed.md).

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Revision ‘B’ 19 Mar 2013
DHC-8 (DASH 8)
SERVICE BULLETIN 84-28-10
Fuel System - Center Wing - Engine Fuel Feed Installation - Retrofit Kit,
Inspect and Remove Clamps - ModSum 4-113722
This page transmits Revision ‘B’ of Service Bulletin 84-28-10, pages 1 thru 8,
dated 19 Mar 2013.
This service bulletin is re-issued in its entirety for the reasons that follow:
- the PLANNING INFORMATION section A Effectivity on page 1 is revised to
add a statement ‘This Service Bulletin is required for operators that have
incorporated ModSum IS4Q2800010’.
- the PLANNING INFORMATION section BR e a s o non page 2 is revised to
change the way the ModSum references were given: was IS Mod 4Q2800010
now ModSum IS4Q2800010.
- the PLANNING INFORMATION section L References on page 4 is revised
to convey the latest revision of the service bulletin and engineering
documentation.
The Compliance in the previous issue of this service bulletin is not affected
by this revision. No additional rework to the aircraft is introduced by this
revision.
Remove the previous revision of Service Bulletin 84-28-10 and replace with
attached.
Previous issues of Service Bulletin 84-28-10:
Initial issue - Pages 1 thru 8 dated 06 Dec 2011
Revision A - Pages 1 thru 16 dated 17 Aug 2012
2

### Page 2

(No text on this page.)

### Page 3

D
S.B. 84-28-10
Page 1 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 2800 NUMBER: 84-28-10
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
SUBJECT: Fuel System - Center Wing - Engi ne Fuel Feed Installation - Retrofit
Kit, Inspect and Remove Clamps - ModSum 4-113722
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4003 thru
4151
This Service Bulletin is required for operators that have incorporated ModSum
IS4Q2800010.
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None

### Page 4

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 2 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
B. Reason
Problem: Operators are installing new fuel l ine within the left and right wing fuel tanks
in accordance with ModSum 4-113643 (SB 84-28-09). Supporting clamps
and mounting hardware were installed by a previous ModSum
IS4Q2800010, between Y154.825 and Y136.300 in LHS of wing. The fuel
lines introduced by ModSum 4-113643 do not require the supporting
provisions introduced by ModSum IS4Q2800010.
Solution: ModSum 4-113722 removes clamps and related hardware installed to
tube assembly 82822140 and tube assembly 82822131 in the left wing fuel
tank.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
-a i r c r a f t i s d e f u e l e d
- aircraft is put into a maintenance configuration, all aircraft power is selected to
OFF, MLG lock pins are installed, NG ground lock is engaged, hydraulic
systems pressure is depleted and work stands are set in position
- wing access panel 522CT is opened
- area between Y136.300 and Y157.825 is inspected for clamps and hardware
attaching tube assembly P/N 82822140 and tube assembly 82822131
- If the clamps and hardware are installed, remove and discard as required
- If no clamps exist, no additional action is required
- access panel is installed
- close out.
D. Compliance
Bombardier Inc. highly recommend that ModSum 4-113722 be incorporated at the
earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
Transport Canada Airworthiness Directive pending

### Page 5

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 3 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
Organization No: DAO #93-Q-02.
This Service Bulletin does not affect Airworthiness Limitations (AWLs) or Damage
Tolerance Inspections (DTIs).
F. Manpower
NOTE: To reduce down time both service bulletins 84-28-10 and 84-28-09 may
be done concurrently.
It will take an estimated 7.50 man-hours to complete this service bulletin. The
breakdown of the man-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 2.00*
Procedure 0.50
Test / RTS 1.00
Close-Out 2.00
*Does not include time to drain the fuel tanks.
For any on-site labor assistance, please speak with a Fleet Services representative
for a quote. The Fleet Services group can be contacted via the Q Series Technical
Help Desk by telephone at 416-375-4000 or email at:
thd.qseries@aero.bombardier.com.
G. Material - Price and Availability
None

### Page 6

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 4 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
This service bulletin is self-contained. No drawings will be issued for this service
bulletin.
H. Tooling - Price and Availability
None
I. Weight and Balance
None
J. Electrical Load Data
Not affected
K. Publications Affected
ModSums Manual PSM 1-84-12..................................
L. References
Revision ‘B’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8DK4181 1 -
ModSum 4Q113722 Rev. ‘B’
ModSum 4-113722 Rev. ‘B’
PCA 42939 Revision 6 (for internal reference only)
Transport Canada Airworthiness Directive pending

### Page 7

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 5 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
None
B. Parts Required to Modify Spares
None
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
A. Job Set-Up
(1) Placard and select all aircraft electrical power to OFF. Obey all relevant
WARNINGS and CAUTIONS. Refer to applicable instructions in AMM PSM
1-84-2, TASKs 24-00-00-861-802 and 24-00-00-910-801.
(2) Make sure that lock pins are installed thru each main gear and main gear door
mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Set up the work platforms or ladders as required to gain access to wing access
panel 522CT (refer to AMM TASKs 06-41-00-992-808). Make sure the work
platforms or ladders are electrically grounded.

### Page 8

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 6 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
(5) Remove and retain wing access panel 522CT. Refer to applicable instructions in
AMM TASK 57-11-01-000-801.
B. Procedure
(1) Inspect fuel tank area between Y136.300 and Y157.825. If clamp
MS21919WDF-12, clamp MS21919WDF-16 screw NAS1801-3-16, washers
AN960D10L, spacer NAS43DD3-32FC and nut MS21042L3 are installed to tube
assembly 82822140 and tube assembly 82822131 remove and discard as
required. Refer to Figure 1 and Figure 2.
(2) If clamps and related hardware are not installed, no additional action is required.
(3) Install retained wing access panel 522CT. Refer to applicable instructions in
AMM PSM 1-84-2, TASK 57-11-01-400-801.
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applic able logbook(s). Enter this ModSum
number only after complete and functional incorporation of all work defined in
this service bulletin.

### Page 9

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 7 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
Engine Fuel Feed Line - Clamp Removal Procedure-Locator
Figure 1
Rework Location, Refer To Figure 2

### Page 10

SERVICE BULLETIN 84-28-10
S.B. 84-28-10
Page 8 of 8
06 Dec 2011
Revision ‘B’ 19 Mar 2013 MD
Engine Fuel Feed Line - Clamp Removal Procedure
Figure 2
WASHER
NAS1801-3-16
SCREW
SPACER
NAS43DD3-32FC
AN960D10L
CLAMP
MS21919WDF-12
CLAMP
MS21919WDF-16
NUT, SELF-
LOCKING
MS21042L3
82822140
82822131
TUBE ASSY
TUBE ASSY
34

### Page 11

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 12

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
