# Bombardier Service Bulletin 84-28-14

Copy: Revision A ("SB 84-28-14 RA"), 16 pages: PDF https://openairdocs.org/files/sha256/c8/ba/c8baa6a62c4367241faf93b45acd97af458424b04d865c59a0b3f2aaf72efd67; text https://openairdocs.org/service-documents/bombardier/sb-84-28-14/file/c8baa6a62c43.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-28-14
- Latest revision known: 84-28-14, Revision A, dated June 9, 2014 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-28-14

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-17-25](https://openairdocs.org/ad/2015-17-25.md), effective Oct 7, 2015: Revision A

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-28-14/proposed.md).

## Text (16 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2014-0583; AD 2015-17-25 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Revision ‘A’ 09 Jun 2014
DHC-8 (DASH 8)
SERVICE BULLETIN 84-28-14
Fuel System - Center Wing - Engine Fu el Feed Installation - New Retrofit
Kit To Eliminate Fouling Condition - ModSum 4-113754
This page transmits Revision ‘A’ of Service Bulletin 84-28-14, pages 1 thru
12, dated 09 Jun 2014.
This service bulletin is re-issued in its entirety for the reasons that follow:
-t h e Description section revised to remove an extra ‘access panel’ from
component
-t h e Compliance section revised to add the applicable AD number
-t h e Material - Price and Availability section is revised with updated format
-t h e Publications Affected section is revised with Weight and Balance
manual deleted
-t h e References section is revised to convey the latest revision of the service
bulletin and engineering documentation
-s t e p 3.C.(2) of the ACCOMPLISHMENT INSTRUCTIONS section is revised
with TASK reference changed to ‘TASK 57-11-01-400-801’.
The Compliance in the previous issue(s) of this service bulletin is not
affected by this revision. No additional rework to the aircraft is introduced by
this revision.
Remove the initial issue of Service Bulletin 84-28-14 and replace with
attached.
Previous issue(s) of Service Bulletin 84-28-14:
Initial issue - Pages 1 thru 12 dated 17 Aug 2012

### Page 2

(No text on this page.)

### Page 3

D
S.B. 84-28-14
Page 1 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 2812 NUMBER: 84-28-14
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGE OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
SUBJECT: Fuel System - Center Wing - Engine Fuel Feed Installation - New
Retrofit Kit To Eliminate Fouling Condition - ModSum 4-113754
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003, 4004, 4006, 4008 thru 4417.
NOTE: ModSum 4-113643 (Bombardier Service Bulletin 84-28-09) is a
prerequisite to this ModSum.
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None

### Page 4

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 2 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
B. Reason
Problem: A fouling condition exists in the right hand fuel tank at Yw157.825 between
tube assembly 82822144-003 and the wing structure.
Solution: Introduce a new retrofit kit which replaces existing tube assembly
82822144-003 with a new tube assembly.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- aircraft electrical power is removed
- the nose landing gear lock is engaged
- the main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- the fuel tanks are drained, aircraft electrical power is removed and the engines are
supported
- access panel 623AT is removed
- tube assembly 82822144-003 and O-rings are removed and discarded. Existing
threadless couplings are kept
- new tube assembly 82822144-005 is installed with new O-rings and kept threadless
coupling
- a pressure test of new tube assembly 82822144-005 is done
- close out.
D. Compliance
Bombardier Inc. highly recommend that ModSum 4-113754 be incorporated at the
earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
Transport Canada Airworthiness Directive CF-2013-09R1.
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
Organization No: DAO #93-Q-02.

### Page 5

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 3 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
Tolerance Inspections (DTIs).
F. Manpower
It will take an estimated 2.00 man-hours to complete this service bulletin. The
breakdown of the man-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.50
Procedure 0.50
Test / RTS 0.50
Close-Out 0.50
For any on-site labor assistance, please contact a Fleet Services representative for
a quote. The Fleet Services group can be contacted via the Q Series Technical
Help Desk by telephone at 416-375-4000 or email at:
thd.qseries@aero.bombardier.com
G. Material - Price and Availability
The ModKit(s) required to do this service bulletin are listed in the table below:
Operators should submit a purchase orde r through the Customer Accounts Service
Team (CAST) at Bombardier Aerospace Regional Aircraft division specifying aircraft
serial number(s) to:
Bombardier Aerospace
Customer Accounts Services Team (Mail Stop N11-32)
123 Garratt Blvd.
Toronto
Ontario
Canada M3K-1Y5
Facsimile: (416) 375-3060
Telephone: (416) 375-3920
Facsimile:
International: (416) 375-3334
European: (416) 373-5966
Americas East: (416) 373-5964
Americas West: (416) 373-5965

### Page 6

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 4 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
Telephone:
International: (416) 375-3706
European: (416) 373-3704
Americas East: (416) 375-3700
Americas West: (416) 373-5888
E-mail addresses:
International: cast.international@aero.bombardier.com
European: cast.europe@aero.bombardier.com
Americas East: cast.americaseast@aero.bombardier.com
Americas West: cast.americaswest@aero.bombardier.com
Kit Number Description
8MK4498-001 Retrofit - Engine Fuel Feed Installation
H. Tooling - Price and Availability
None
I. Weight and Balance
None
J. Electrical Load Data
Not affected
K. Publications Affected
Dash 8 Illustrated Parts Catalogue PSM 1-84-4....................
ModSums Manual PSM 1-84-12..................................
Weight and Balance Manual (Imperial) PSM 1-84-8................
L. References
Revision ‘A’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8MK4498 1 -

### Page 7

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 5 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
ModSum 4-113754 Rev. ‘B’
ModSum 4Q113754 Rev. ‘B’
Bombardier Service Bulletin 84-28-09 Rev. ‘C’ (ModSum 4-113643)
Bombardier Service Bulletin 84-28-13 (ModSum 4-113745)
Bombardier Service Bulletin 84-28-13 (ModSum 4-113745)
PCA 44006 Revision 0 (for internal reference only)
Transport Canada Airworthiness Directive CF-2013-09R1 dated 28 May 2013
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
(1) Modification Kit 8MK4498-001, Retrofit - Engine Fuel Feed Installation
(2) Detailed Kit Content:
Quantity Per Kit
-001
Part Number Description Remarks
1 82822144-005 Tube Assembly
2 MS29513-214 Packing, O-Ring
1 MS29513-215 Packing, O-Ring
Listed drawings that are required to complete the kits above can be requested by
writing to the following e-mail address:
qseriesdwgrequest@aero.bombardier.com
B. Parts Required to Modify Spares
None

### Page 8

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 6 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
The following parts may be affected by this service bulletin. Indented parts are
components of the next higher assembly. The quantity (Qty.) column lists the
quantity that may be affected per aircraft for non-indented parts and the quantity
p e rn e x th i g h e ra s s e m b l yf o ri n d e n t e dp a r t s .
Existing
Part Number Description Qty. IC DC
New Part
Number PNC
82822144-003 Tube Assem-
bly
1 A DIS 82822144-005 N
IC Interchangeability Code
A Not interchangeable.
B Removed Part. No direct replacement.
C Conditionally Interchangeable. Inst allation of superseded part negates the
intent of this service bulletin.
DC Disposition
DIS Discard Part.
MUI Multiple Usage Item: Return to stock if serviceable.
RWK Rework existing part in accordance with this service bulletin.
RWI Rework existing part per .....
SAL Salvage. Return to operator’s stores for salvage consideration.
PNC Part Number Code
N No equivalent Bombardier Inc. part number for reworked part. Indicate on
part that this service bulletin has been accomplished.
R Part number after rework.
S Superseding or equivalent part number.
X Reworked part and superseding part are functionally and physically
equivalent but not identical.

### Page 9

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 7 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
3. ACCOMPLISHMENT INSTRUCTIONS
A. Job Set-Up
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY
RETRACT. THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE
TO THE EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS
CAN ACCIDENTALLY CLOSE THE LANDING GEAR DOORS. THIS CAN
CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE LANDING GEAR
DOORS. MAKE SURE YOU DISCONNECT THE LANDING GEAR
DOORS. IF YOU DO NOT DO THIS THE LANDING GEAR DOORS WILL
CLOSE WHEN YOU APPLY THE HYDRAULIC PRESSURE. THIS CAN
CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
(1) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(2) Make sure the nose gear ground lock is engaged.
WARNING: YOU MUST REMOVE THE FUEL FROM THE FUEL TANK IN AN OPEN
AREA. IF YOU DO NOT DO THIS, YOU CAN CAUSE INJURIES TO
PERSONS AND DAMAGE TO THE EQUIPMENT.
(3) Refer to AMM TASK 28-10-00-840-801 and prepare fuel tank for access. Make
sure no fuel or fuel vapors are present before working on aircraft or in the fuel
tanks.
(4) Refer to AMM TASK’ 24-00-00-861-802, TASK 24-00-00-910-801 and placard and
select all aircraft electrical power to OFF. Obey all relevant WARNINGS and
CAUTIONS.
(5) Set up work platforms and/or ladders to permit access to right wing fuel tank
access panel 623AT. Make sure that the work platforms or ladders are
electrically grounded.
(6) Refer to AMM TASK 28-00-00-910-801 and make sure to obey the fuel system
safety precautions.

### Page 10

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 8 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
(7) Refer to AMM TASK 24-00-00-910-801 and make sure to obey the
electrical/electronic safety precautions.
(8) Refer to AMM TASK 24-00-00-910-802 and obey the electrostatic discharge
safety precautions.
CAUTION: MAKE SURE THAT THE FUEL TANKS ARE DRAINED BEFORE YOU
REMOVE THE ACCESS PANELS. IF YOU DO NOT DO THIS, YOU CAN
CAUSE DAMAGE TO THE WING STRUCTURE.
CAUTION: MAKE SURE THAT YOU DO NOT MOVE THE AIRCRAFT BEFORE YOU
INSTALL THE FUEL ACCESS PANELS. THIS IS NECESSARY TO
PREVENT DAMAGE TO THE WING AND THE WING BOX STRUCTURE.
(9) Refer to the applicable instructions in AMM TASK 57-11-01-000-801 and remove
right wing fuel tank access panel 623AT.
(10) Use cotton cloths or a natural sponge to soak up the remaining fuel.
(11) Refer to the applicable instructions in AMM TASK 28-10-00-840-802 and remove
fuel fumes from tank(s).
CAUTION: KEEP A CONTINUOUS FLOW OF VENTILATING AIR THROUGH A
FUEL TANK WHEN WORK IS BEING DONE INSIDE THE TANK.
B. Procedure
(1) Refer to the applicable steps in AMM TASK 28-21-06-000-801 and remove and
discard tube assembly 82822144-003. Keep threadless couplings
B0305080A16C and discard all O-rings.
NOTE: When installing new tube assembly 82822144-005, connect shorter leg
(9.67 inches, reference Figure 1) of the tube to the fitting on the front spar
first.
(2) Refer to the applicable steps in AMM TASK 28-21-06-400-801 and install new
tube assembly 82822144-005 with two new O-rings MS29513-214 (reference
Figure 2) , one new O-ring MS29513-215 (reference Figure 3) and kept
threadless couplings B0305080A16C.
C. Close Out
(1) Refer to AMM TASK 28-21-00-780-801 and do a pressure test of new tube
assembly 82822144-005. During the pressure test, monitor the position of tube
assembly 82822144-005 and make sure a 0.125 inch (1/8 inch) gap is kept
between tube assembly and wing structure including ribs.

### Page 11

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 9 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
(2) Refer to AMM TASK 57-11-01-400-801 and install right wing fuel tank access
panel 623AT.
(3) Remove all tools and equipment from the work area.
(4) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 12

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 10 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
View Looking Down On Right Hand Wing
Figure 1
TUBE ASSEMBLY
82822144-005
ENGINE
FEED
SYSTEM
82822143-103
THREADLESS
COUPLING
ASSEMBLY
B0305080A16C
FUEL FEED INSTALLATION
82822004
DETAIL B
DETAIL A

### Page 13

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 11 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
Detail A
Figure 2
PACKING, O-RING
MS29513-214
QTY: 2
TUBE ASSEMBLY
82822144-005
THREADLESS COUPLING ASSEMBLY
B0305080A16C
ENGINE FEED SYSTEM
82822143-103

### Page 14

SERVICE BULLETIN 84-28-14
S.B. 84-28-14
Page 12 of 12
17 Aug 2012
Revision ‘A’ 09 Jun 2014 MG
Detail B
Figure 3
O-RING PACKING
MS29513-215
TUBE ASSEMBLY
82822144-005
THREADLESS
COUPLING
ASSEMBLY
B0305080A16C
FUEL FEED
INSTALLATION
82822004
12

### Page 15

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 16

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
