# Bombardier Service Bulletin 84-28-26

Copy: Revision A ("84-28-26A - Released Copy"), 16 pages: PDF https://openairdocs.org/files/sha256/2e/73/2e731808eee9568a3b971e79021b733498a186c2b0b156df97bd30b6a861fcbd; text https://openairdocs.org/service-documents/bombardier/sb-84-28-26/file/2e731808eee9.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2019-0726; AD 2020-04-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-28-26
- Latest revision known: 84-28-26, Revision A, dated November 29, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-28-26

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-23-01](https://openairdocs.org/ad/2022-23-01.md), effective Dec 13, 2022: Revision A
- [AD 2020-04-20](https://openairdocs.org/ad/2020-04-20.md), effective May 4, 2020: Revision A

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/bombardier/sb-84-28-26/proposed.md).

## Text (16 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2019-0726; AD 2020-04-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Revision ‘A’ 29 Nov 2018
D H C --- 8 ( D A S H 8 )
S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
Fuel - - - Fuel System - - - Vent Line Isolator Locations - - - Electrical Bonding
Check of Threaded Couplings P/N B0305119- - - 16A between Wing
Station Yw  42.000 and Yw  60.900
This page transmits Revision ‘A’ of Service Bulletin 84- - -28- - -26, pages 1 thru
12, dated 29 Nov 2018.
This service bulletin is re- - -issued in its entirety for the reasons that follow:
--- t h eEffectivity section is revised to include TCCA approved Airworthiness
Limitation Change Request (ACR) list and AD number
--- t h eCompliance section is revised to include Transport Canada
Airworthiness Directive (AD) CF- - -2017- - -04R2
--- t h eReferences section is revised to convey the latest revision of the service
bulletin and engineering documentation
--- t h eClose Out section is revised to add Revision ‘A’ to step (5)
The Compliance in the previous issue of this service bulletin is not affected
by this revision. No additional rework to the aircraft is introduced by this
revision.
Remove the initial issue of Service Bulletin 84- - -28- - -26 and replace with
attached.
Previous issue(s) of Service Bulletin 84- - -28- - -26:
Initial issue - - - Pages 1 thru 12 dated 14 Aug 2018

### Page 2

(No text on this page.)

### Page 3

D
S . B . 8 4 --- 2 8 --- 2 6
Page 1 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 2812 NUMBER: 84- - -28- - -26
BOMBARDIER AEROSPACE CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARL Y SIGNIFICANT AND
URGE OPERATORS TO PROMPTL Y EVALUATE THE CONTENTS
SUBJECT : Fuel - - - Fuel System - - - Vent Line Isolator Locations - - - Electrical Bonding
Check of Threaded Couplings P/N B0305119- - - 16A between Wing
Station Yw  42.000 and Yw  60.900
1. PLANNING INFORMA TION
A. Effectivity
Aircraft Affected:
In- - -Service: DHC- - -8 Aircraft Models 401 and 402 Serial Numbers 4001 and
4003 thru 4489, 4491 thru 4575 that have incorporated SB
8 4 --- 2 8 --- 2 1 R e v A b u t h a v eNOT completed IS4Q2800032
Revision A or that have NOT previously complied with any of
the TCCA approved Airworthiness Limitation Change Request
(ACR) listed in T able below, before the effective date of AD
CF- - -2017- - -04R2 (9 October 2018).
ACR Number Dated
ACR 400- - -072 23 January 2018
ACR 400- - -073 23 January 2018
ACR 400- - -074 24 January 2018
ACR 400- - -077 27 February 2018

### Page 4

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 2 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
ACR 400- - -078 21 March 2018
ACR 400- - -079 18 April 2018
ACR 400- - -080 30 April 2018
ACR 400- - -081 04 May 2018
ACR 400- - -082 04 May 2018
ACR 400- - -083 04 June 2018
ACR 400- - -084 18 May 2018
NOTE: Aircraft MSN 4576 to 4581 inclusive (post production modification
4- - -113969) are also required to complete this SB 84- - -28- - -26.
NOTE: Electrical Bonding of the threaded couplings was completed on
verification aircraft S/N 4490. MSN 4490 is not required to complete
this SB 84- - -28- - -26.
NOTE: The instructions in this service bulletin are only applicable to the
systems and parts installed at the time of delivery on the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s). Before you do
this bulletin, examine all STC or equivalent action changes to make
sure this bulletin can be completed.
Spares Affected:
None
B. Reason
Problem: ModSum 4- - -113970 (revision A of SB 84- - -28- - -21) has not been included
with specific instructions for electrical bonding checks of threaded
couplings located on the vent line between wing station Yw  42.000 and
Yw  60.900.
Operators have requested a procedure to complete electrical bonding
checks of threaded couplings.
Solution: This service bulletin gives the instructions to do the electrical bonding
checks of threaded couplings located on the vent line between wing
station Yw  42.000 and Yw  60.900 (LH and RH).

### Page 5

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 3 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
C. Description
The procedures in this service bulletin give the instructions to do the tasks that follow:
- - - aircraft electrical power is removed
- - - the nose landing gear lock is engaged
- - - the main landing gear lock pins are installed through each main gear and main gear
door mechanism
- - - fuel tank is prepared for access
- - - access panels are opened
- - - upper part of the inboard fuel tank partition panels are removed as required
- - - access is gained through collector bay to the isolators installed on inboard vent tube
between wing stations Yw  42.000 and Yw  60.900
- - - electrical bonding checks of threaded couplings on the vent line between wing
stations Yw  42.000 and Yw  60.900 (LH and RH) are done
- - - electrical bonding check of the fuel tank partition panels are completed
- - - close out.
D. Compliance
Bombardier Inc. highly recommends the accomplishment of this inspection and
rectification service bulletin at the earliest opportunity unless otherwise directed by
the operator’s airworthiness authority.
Transport Canada Airworthiness Directive CF- - -2017- - -04R2.
E. Approval
The technical content of this service bulletin has been approved under the authority of
the Transport Canada Civil Aviation (TCCA) Design Approval Organization No: DAO
# 9 3 --- Q --- 0 2 .
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
T olerance Inspections (DTIs).
F. M a n p o w e r

### Page 6

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 4 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
It will take an estimated 4.00 man- - -hours to complete this service bulletin. The
breakdown of the man- - -hours is shown in the table that follows:
TASK M A N --- H O U R S
J o b S e t --- U p 1.00
Procedure 2.00
Close- - -Out 1.00
This estimate is for direct labour done by an experienced crew and it does not
include, planning, familiarization, cure tim e, part fabrication, tool acquisition or lost
time.
G. Material - - - Price and Availability
Not Applicable
H. T ooling - - - Price and Availability
Not Applicable
I. Weight and Balance
Not affected
J. Electrical Load Data
Not affected
K. Publications Affected
Maintenance Requirement Manual PSM 1- - -84- - -7....................
ModSums Manual PSM 1- - -84- - -12..................................
L. References
Revision ‘A’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
ModSum IS4Q2800032 Rev. ‘A’

### Page 7

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 5 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
PCA 46423 Revision 10 (for internal reference only)
Transport Canada Airworthiness Directive CF- - -2017- - -04R2
2. MATERIAL INFORMA TION
A. Parts Required Per Aircraft
None
B. Parts Required to Modify Spares
None
C. Special T ools and Equipment Required
Reference Designation Remarks
Biddle DLRO
#247001, or BCD
MI bonding meter,
or equivalent
Digital Low Resistance
Ohmmeter
Commercially Available
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
If it is not possible to complete all the instructions of this service bulletin because of the
configuration of the aircraft, speak with a representative of Bombardier in the CRC at
1- - -844- - -272- - -2720 (1- - -844- - -CRC- - -CRC0) or email at thd.qseries@aero.bombardier.comfor
analysis and to get an approved disposition to complete this service bulletin.

### Page 8

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 6 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
A . J o b S e t --- U p
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALL Y
RETRACT . THIS CAN CAUSE INJURIES TO PERSONS AND
DAMAGE TO THE EQUIPMENT .
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS
CAN ACCIDENTALL Y CLOSE THE LANDING GEAR DOORS. THIS
CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE
EQUIPMENT .
WARNING: OBEY ALL THE FUEL SAFETY PRECAUTIONS WHEN YOU DO
WORK ON THE FUEL SYSTEM AND/OR A FUEL SYSTEM
COMPONENT . IF YOU DO NOT YOU CAN CAUSE INJURIES TO
PERSONS AND/OR DAMAGE TO EQUIPMENT .
WARNING: YOU MUST REMOVE THE FUEL FROM THE FUEL TANK IN AN
OPEN AREA. IF YOU DO NOT DO THIS, YOU CAN CAUSE INJURIES
TO PERSONS AND DAMAGE TO THE EQUIPMENT .
WARNING: DRAIN THE FUEL TANK BEFORE YOU REMOVE THE ACCESS
PANELS. IF YOU DO NOT DO THIS, YOU CAN CAUSE DAMAGE TO
THE WING STRUCTURE.
(1) Placard and select all aircraft electrical power to OFF . Obey all relevant
W A R N I N G S a n d C A U T I O N S ( r e f e r t o A M M T A S K ’ S 2 4 --- 0 0 --- 0 0 --- 8 6 1 --- 8 0 2 a n d
24- - -00- - -00- - -910- - -801).
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Make sure the nose gear ground lock is engaged.

### Page 9

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 7 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
(4) Set wheel chocks in front and behind the landing gear tires.
(5) Defuel the aircraft (refer to AMM TASK 12- - -10- - -28- - -650 802).
( 6 ) M a k es u r et od e - - - e n e r g i z et h ea i r c r a f te l e c t r i c a ls y s t e m( r e f e rt oA M MT A S K
24- - -00- - -00- - -861- - -802).
(7) Set up work platforms or ladders around and/or under the left and right wing to
permit access to the fuel tanks. Make sure that the work platforms or ladders are
electrically grounded.
(8) Make sure to obey the fuel system safety precautions (refer to AMM TASK
28- - -00- - -00- - -910- - -801).
(9) Obey the electrical/electronic safety precautions (refer to AMM TASK
24- - -00- - -00- - -910- - -801).
(10) Obey the electrostatic discharge safety precautions (refer to AMM TASK
24- - -00- - -00- - -910- - -802).
(11) Prepare the left and right wing fuel tanks for access (refer to AMM TASK
28- - -10- - -00- - -840- - -801).
(12) Remove the applicable left and right wing panels that follow:
ACCESS DESIGNATION
522AT (left wing)
622AT (right wing)
Wet Bay Fuel Access Panels
(a) For removal of the wet bay fuel access panel refer to AMM TASK
57- - -11- - -01- - -000- - -801.
(13) Remove the fuel fumes (refer to AMM TASK 28- - -10- - -00- - -840- - -802).
(14) Remove the upper part of the inboard sid e partition panel assemblies as required
(refer to the applicable instructions in AMM TASK 57- - -14- - -00- - -000- - -801).
WARNING: FUEL PLUMBING SYSTEMS ARE DESIGNED WITH ELECTRICAL
BONDING FEATURES INCLUDING BONDING JUMPERS. SELF
BONDING COUPLINGS, CONDUCTIVE FITTINGS AND COMPONENTS
WITH CONDUCTIVE INTERFACES. THESE DESIGN FEATURES ARE
CLASSIFIED AS CRITICAL DESIGN CONFIGURATION CONTROL
LIMITATION (CDCCL) ITEMS. THE INTEGRITY OF THESE CRITICAL
DESIGN FEATURES MUST BE MAINTAINED TO ENSURE THAT
UNSAFE CONDITIONS DO NOT DEVELOP THROUGH MAINTENANCE.

### Page 10

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 8 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
B. Procedure
WARNING: DO NOT DAMAGE THE PROTECTIVE SLEEVE (HOSE). THE
PROTECTIVE SLEEVE (HOSE) IS NECESSARY TO PROVIDE
ELECTRICAL ISOLATION BETWEEN THE FUEL TANK VENT - - - LINES
AND THE ADJACENT STRUCTURE. DAMAGE TO THE PROTECTIVE
SLEEVE CAN POSSIBL Y CAUSE AN IGNITION SOURCE INSIDE THE
FUEL TANK DURING A LIGHTNING STRIKE.
The procedures that follow give the instructions to do the electrical bonding check in the
left side fuel tank. Procedure for the right side is similar.
(1) Gain access to the two threaded couplings installed adjacent to the isolator on
the inboard vent tube (left wing) between wing stations Yw - - -42.000 and Yw
- - -60.900 (refer to Figure 1).
(2) Do the electrical bonding test of the threaded couplings (two locations) installed
adjacent to the isolator on the inboard vent tube as follows:
(a) Connect one lead of a digital low resistance ohmmeter (DLRO) on the fuel vent
line approximately 1.0 inch from the swaged threaded ferrule as shown in
Figure 2.
(b) Connect the other lead of the DLRO on the ferrule of the isolator as shown in the
Figure 2.
(c) Make sure that the resistance is less than or equal to 1000 milliohms.
(d) If the reading exceeds 1000 milliohms, remove the nut of the threaded coupling
(refer to Figure 3 and the applicable instructions given in AMM TASK
28- - -12- - -01- - -000- - -801) and make sure the split ring is seated properly and not
damaged.
(e) Re- - -install the threaded coupling (refer to Figure 3 and the applicable
instructions given in AMM TASK 28- - -12- - -01- - -400- - -801).
(f) Repeat the electrical bonding check and make sure that the resistance is less
than or equal to 1000 milliohms.

### Page 11

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 9 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
(3) Do the the above procedure (Step 1 and 2) at the right side (two locations) of the
fuel tank and make sure that the resistance is less than or equal to 1000
milliohms.
C. Close Out
(1) Install the upper part of the inboard side partition assemblies (refer to the
applicable instructions in AMM TASK 57- - -14- - -00- - -400- - -801).
(2) Do the required electrical bonding checks of the collector bay panels at TP223
and TP227 (refer to AMM TASK 51- - -80- - -00- - -760- - -810 Figure 280 Sheet 12 of 12,
step AI and T able 35).
(3) Install the applicable left and right wing panels that follow:
ACCESS DESIGNATION
522AT (left wing)
622AT (right wing)
Wet Bay Fuel Access Panels
(a) For installation of the wet bay fuel access panel refer to AMM TASK
57- - -11- - -01- - -400- - -801.
(4) Remove all tools and equipment from the work area.
(5) On completion of this service bulletin, make the following entry in the appropriate
logbooks: “Service Bulletin 84- - -28- - -26 Revision ‘A’ {Fuel - - - Fuel System - - - Vent
Line Isolator Locations - - - Electrical Bonding Check of Threaded Couplings P/N
B0305119- - -16A between Wing Station Yw  42.000 and Yw  60.900} is
accomplished.”

### Page 12

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 10 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
Inboard Vent Tube Location (Wi ng Station - - - Yw 42.000- - - Yw 60.900)
Figure 1
THREADED COUPLING LOCATIONS LEFT WING
SHOWN RIGHT WING OPPOSITE .
VENT TUBE AND S E EF I G U R E0 2
LH INBOARD
TOP PARTITION PANEL
ISOLATOR ASSEMBL Y

### Page 13

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 11 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
Instructions for Electrical Bonding Measurements
Figure 2
B
THREADED COUPLING LOCATIONS LEFT WING
SHOWN RIGHT WING OPPOSITE.
B

### Page 14

S E R V I C E B U L L E T I N 8 4 --- 2 8 --- 2 6
S . B . 8 4 --- 2 8 --- 2 6
Page 12 of 12
14 Aug 2018
PM
Revision ‘A’ 29 Nov 2018
Detail Views - - - Fuel Vent Line Installation
Figure 3
ALL DIMENSIONS ARE IN INCHES

### Page 15

May2018
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 16

May 2018
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
