# Bombardier Service Bulletin 84-32-118

Copy: No revision named ("SB 84-32-118"), 14 pages: PDF https://openairdocs.org/files/sha256/87/f2/87f2d522a58e648ef8e85df1127cbd1afaf23082abbdcaf25f442e9d7a4e5a09; text https://openairdocs.org/service-documents/bombardier/sb-84-32-118/file/87f2d522a58e.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-0680; AD 2015-17-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-32-118
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-32-118

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-17-03](https://openairdocs.org/ad/2015-17-03.md), effective Oct 7, 2015: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-32-118/proposed.md).

## Text (14 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-0680; AD 2015-17-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

D
S.B. 84-32-118
Page 1 of 12
08 Apr 2014
NB
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 3200 NUMBER: 84-32-118
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGE OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
SUBJECT: Landing Gear, RH Nacelle - Removal of Parking Brake Hand Pump
Lever - ModSum 4-113803
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003 thru 4419.
NOTE: This Service Bulletin does not apply to aircraft
previously reworked by Service Bulletin 84-32-99
(ModSum 4-113723).
Production: ModSum 4-113723 will be installed before delivery on
applicable DHC-8 Aircraft at Serial Number 4420 and
subsequent.

### Page 2

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 2 of 12
08 Apr 2014
NB
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None
B. Reason
Problem: An operator had reported an incident which involved the migration of the
main landing gear parking brake hand pump lever resulting in the damage
of the nacelle side panels.
During the incident, the parking brake pump lever located in the RH nacelle
had dislodged from its mounting bracket and migrated down from the
upper retaining collar and fell over inside the nacelle.
Due to the unpredictable nature of an object migrating from its mounting
position, the possibility exists that the pump lever could lodge itself into a
position that would prevent the extension of the MLG or prevent the nacelle
doors from opening or become runway F.O.D.
Cause: The quick release pin used to secure the pump lever installation may not
have been correctly installed, compromising the installation. If the quick
release pin is not fully engaged, the potential exists for the pin to migrate
out, disengaging, and allowing the pump lever to become dislodged from
its installation position.
Solution: ModSum 4-113803 removes the existing parking brake hand pump lever
from the RH nacelle.
ModSum 4-113804 provides the option to relocate the parking brake hand
pump lever to its new productionized position in the nose compartment of
the aircraft.

### Page 3

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 3 of 12
08 Apr 2014
NB
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- all aircraft electrical power systems are selected to OFF
- the nose landing gear lock is engaged
- the main landing gear lock pins are insta lled through each main gear and main gear
door mechanism
- work platforms or ladders are set up and properly grounded
- quick release pin is depressed and parking brake hand pump lever is removed from
existing RH nacelle location and tagged
- quick release pin assembly is removed and discarded
- existing rivet hole exposed surface is tr eated with alodine, primed with an epoxy
chromate primer and existing rivet hole is then plugged as required
- neoprene pad from around hole in flange of existing bracket assembly is removed
and discarded
- quick release pin hole in the existing bracket 82974258 is opened from 0.253 to
0.263 inch diameter, the existing hole exposed surface is treated with alodine,
primed with an epoxy chromate primer and existing hole is then plugged as
required
- existing nacelle cushion clamp assembly is cut off and sharp edges are deburred
(mounting hardware is left in place)
- close out.
D. Compliance
Bombardier Inc. highly recommends that ModSum 4-113803 be incorporated at
the earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
A Transport Canada Airworthiness Directive is pending.

### Page 4

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 4 of 12
08 Apr 2014
NB
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
Organization No: DAO #93-Q-02.
This Service Bulletin does not affect Airworthiness Limitations (AWLs) or Damage
Tolerance Inspections (DTIs).
F. Manpower
It will take an estimated 2.5 man-hours to complete this service bulletin. The
breakdown of the man-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.50
Procedure 1.50
Test / RTS 0.00
Close-Out 0.50
For any on-site labor assistance, please speak with a Fleet Services representative
for a quote. The Fleet Services group can be contacted via the Q Series Technical
Help Desk by telephone at 416-375-4000 or email at:
thd.qseries@aero.bombardier.com.
G. Material - Price and Availability
The part(s) and material(s) detailed in Paragraph 2.A. may be either furnished or
fabricated from the operator’s existing stock, purchased as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources. DK parts are to be manufactured and approved locally (refer to disclaimer
in the related text or illustration). In some cases, an equivalent to the DK part may
be available from Bombardier under the production part number shown as
reference in Parts Required Per Aircraft.
H. Tooling - Price and Availability
None

### Page 5

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 5 of 12
08 Apr 2014
NB
I. Weight and Balance
A/C Type and Model Weight (Lb) Arm (Inches)
Moment
(Inches x Lb)
x 0.001
DHC-8 Model 401/402 -1.09 +469.83 +0.51
J. Electrical Load Data
Not affected
K. Publications Affected
Maintenance Manual PSM 1-84-2................................
Dash 8 Illustrated Parts Catalogue PSM 1-84-4....................
ModSums Manual PSM 1-84-12..................................
Weight and Balance Manual (Imperial) PSM 1-84-8................
Weight and Balance Manual (Metric) PSM 1-84-8M..................
L. References
The initial issue of this service bulletin was prepared to the engineering drawings
and related data that follows:
DRAWING SHEET REV
8DK4219 1 --
8Z0376 1 --
ModSum 4-113803 Rev. ‘A’
ModSum 4Q113803 Rev. ‘A’
PCA 43323 Revision 3 (for internal reference only)
Transport Canada Airworthiness Directive Pending

### Page 6

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 6 of 12
08 Apr 2014
NB
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
(1) Modification Kit 8DK4219-001
(2) Detailed Kit Content:
Quantity Per Kit
-001
Part Number Description Remarks
2 MS20470A8-7S Rivet See NOTE 1 below
2 B0205016AD4-4S Rivet See NOTE 1 below
REF 8Z0376 Retrofit Drawing only
See NOTE 2 below
NOTE 1: Quantity increased to account for losses. Actual quantity required is 1.
NOTE 2 : This service bulletin is self-contained (illustrated). No drawings will be
supplied.
(3) In addition to the above part(s), the following material(s) are required for the
completion of this service bulletin and may be procured as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources.
Addresses of manufacturers and suppliers not shown below are listed in
either Maintenance Manual Chapter 20 or in Structural Repair Manual Chapter
51 or, for 400 Series Aircraft, in Consumable Products Manual PSM 1-84-18.
Product ID No. Qty. Per Aircraft Description Specifications
07-02 1/4 Pint Epoxy Primer DHMS C4.01 Type 2
07-08 1/4 Pint Polyurethane
Enamel
DHMS C4.04
07-21 1/2 Ounce Alodine MIL-C-5541

### Page 7

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 7 of 12
08 Apr 2014
NB
NOTE: Refer to CPM PSM 1-84-18 for the list of approved consumable products
under each Product ID No., any of which can be used unless a note
states otherwise.
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
A. Job Set-Up
(1) Placard and select all aircraft electrical power to OFF. Obey all relevant
WARNINGS and CAUTIONS (refer to AMM TASKs 24-00-00-861-802 and
24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Set wheel chocks in front and behind the landing gear tires.
(5) Set up the work platforms or ladders as required to gain access to the right
hand nacelle (refer to Figure 1). Make sure the work platforms or ladders are
electrically grounded.
B. Procedure
(1) Remove existing parking brake pump lever P/N 72900011-001 or P/N
82900002-001 as follows (refer to Figure 2):
(a) Depress existing quick release pin assembly and remove parking brake
pump lever P/N 72900011-001 or P/N 82900002-001 from existing bracket
82974258. Retain and tag the parking brake lever (Refer to AMM TASK
20-00-01-910-801).

### Page 8

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 8 of 12
08 Apr 2014
NB
NOTE: The operator has the option to re-install the parking brake pump
lever on the aircraft per Service Bulletin 84-32-119 (ModSum
4-113804). There is no requirement to carry the lever onboard the
aircraft. However, Bombardier highly recommends to re-install the
lever on the aircraft per SB 84-32-119, and that the lever be carried
at all times.
NOTE: If the lever is not re-installed, it is the responsibility of the operator
to relocate the parking brake pump lever P/N 72900011-001 or
82900002-001 to ground support equipment for servicing the
parking brake system per AMM TASK 12-10-32-863-801.
(b) Carefully remove existing rivet attaching quick release pin assembly
55440-4R15DL7C-4 from M/C frame aft uplock 85414452 and discard.
(c) Deburr existing rivet hole, treat exposed surfaces with Alodine 1200S or
equivalent, prime treated areas with epoxy chromate primer and plug hole
with rivet B0205016AD4-4S (refer to SRM TASK 51-42-35-02-01).
(d) Remove and discard neoprene pad installed to area around hole in flange on
existing bracket 82974258.
NOTE: Do not remove existing bracket 82974258.
(e) Drill existing quick release pin hole on flange to 0.253/ 0.263 inch diameter.
Deburr existing quick release pin hole, treat exposed surfaces with Alodine
1200S or equivalent, prime treated are as with epoxy chromate primer. Plug
0.253/ 0.263 inch diameter hole with rivet MS20470A8-5S (refer to SRM TASK
51-42-05-00-01).
(2) Carefully cut off existing nacelle cushion clamp assembly M85449/2-18 and
deburr sharp edges of remnant pieces of cushion clamp assembly (leave the
original mounting hardware in place). Make sure the edge of the stiffener of M/C
frame 85414452 is protected during the cutting operation (refer to Figure 2).

### Page 9

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 9 of 12
08 Apr 2014
NB
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum/Modification, add the weight and balance data
shown in Section I of this service bulletin to the Weight and Balance Manual
PSM 1-84-8. Under ‘Description of Change’ enter “ModSum 4-113723
incorporated.”
(3) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 10

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 10 of 12
08 Apr 2014
NB
LEVER REMOVAL
FROM RH NACELLE
RH Nacelle MLG Parking Brake Pump Lever Removal
Figure 1
AREA OF RETROFIT

### Page 11

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 11 of 12
08 Apr 2014
NB
LEVER
PUMP
72900011-001 OR
82900002-001
CLAMP
M85449/2-18
BRACKET
82974258
PARKING BRAKE
HAND PUMP
M/C FRAME AFT
UPLOCK
85414452
QUICK RELEASE
PIN ASSEMBLY
55440-4R15DL7C-4
EXISTING
LOCATION
B0205016AD4-4S
RIVET (PLUG)
RIVET (PLUG)
MS20470A8-5S
OPEN HOLE TO
0.253/0.263 INCH
DIAMETER
RIVET
VIEW ON ARROW
LOOKING FORWARD IN RH NACELLE
REMOVE EXIST-
ING NEOPRENE
PAD AROUND
HOLE IN FLANGE
CUSHIONED
M/C FRAME
85414452
VIEW ON ARROW
CUT LINE AT
RADIUS 2 PL
PUMP
CUT AWAY CLAMP
AND DISCARD
M A K ES U R ET H EE D G EO FS T I F F E N E R
IS PROTECTED DURING CUTTING
OPERATION B
B
RH Nacelle MLG Parking Brake Pump Lever Removal
Figure 2
REMOVE AND TAG PARKING BRAKE HAND
PUMP LEVER.
THE OPERATOR IS RESPONSIBLE TO STOW
THE PARKING BRAKE PUMP LEVER IN THE
GROUND SERVICING EQUIPMENT PER AMM
TASK 12-10-32-863-801.
PARKING BRAKE HAND PUMP LEVER P/N
72900011 AND 82900002 ARE EQUIVALENT.
NOTES:
A
CLAMP IS CUT OFF
AND SHARP EDGES
ARE DEBURRED
MOUNTING HARD-
WARE REMAINS IN
PLACE
1 32
1
3
2
(BRACKET REMAINS
IN PLACE)

### Page 12

SERVICE BULLETIN 84-32-118
S.B. 84-32-118
Page 12 of 12
08 Apr 2014
NB
This Page Intentionally Blank

### Page 13

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 14

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
