# Bombardier Service Bulletin 84-32-143

Copy: Revision B ("84-32-143B"), 18 pages: PDF https://openairdocs.org/files/sha256/77/c0/77c02a789e3719e2c490287efa14e0f17a8e1f6c37558aafaa1778192f5daaef; text https://openairdocs.org/service-documents/bombardier/sb-84-32-143/file/77c02a789e37.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0975; AD 2021-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-32-143
- Latest revision known: 84-32-143, Revision B, dated November 16, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-32-143

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-11-04](https://openairdocs.org/ad/2021-11-04.md), effective Jul 9, 2021: Revisions A and B

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-32-143/proposed.md).

## Text (18 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2020-0975; AD 2021-11-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

T x L t r S B 8 4 --- 3 2 --- 1 4 3
Page 1 of 2
Revision ‘B’ 16 Nov 2016
LS
D H C --- 8 ( D A S H 8 )
S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
Landing Gear - - - MLG Solenoid Sequence Valve Latch And Retract Software
Logic Changes - - - ModSum 4- - - 126659
This page transmits Revision ‘B’ of Service Bulletin 84- - -32- - -143, pages 1 thru 14,
dated 16 Nov 2016.
This service bulletin is re- - -issued in its entirety for the reasons that follow:
--- s e c t i o n1. PLANNING INFORMATION para D. Compliance is revised to include the
TC AD number CF- - -2016- - -31
--- s e c t i o n1. PLANNING INFORMATION para L. References is revised to convey the
latest revision of the service bulletin, re lated engineering documentation and TC AD
number CF- - -2016- - -31
--- s e c t i o n2. MATERIAL INFORMATION para A. Parts Required Per Aircraft is revised
t oa d dN O T E3&4 and to include additional info to existing NOTE 2
--- s e c t i o n3. ACCOMPLISHMENT INSTRUCTIONS para B., revised the NOTE after
step (6) (a) to included additional information, and added new step (10)
- - - the initial issue of the merged UTC Aerospace Systems Service Bulletin VSB
30145- - -32- - -131 is replaced with the R1 version of the VSB dated Nov 4/16.
The Compliance in the previous issue of this service bulletin is not affected by this
revision. No additional rework to the aircraft is introduced by this revision.
Remove revision ‘A’ of Service Bulletin 84- - -32- - -143 and merged VSB, and replace
with this revised service bulletin and merged VSB.
Previous issue(s) of Service Bulletin 84- - -32- - -143:
Initial issue - - - Pages 1 thru 14 dated 30 Jun 2016
Revision ‘A’ - - - Pages 1 thru 12 dated 05 Aug 2016

### Page 2

T x L t r S B 8 4 --- 3 2 --- 1 4 3
Page 2 of 2
Revision ‘B’ 16 Nov 2016
LS
This Page Intentionally Blank
1

### Page 3

D
S.B. 84- - -32- - -143
Page 1 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 3261 NUMBER: 84- - -32- - -143
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARL Y SIGNIFICANT AND
URGE OPERATORS TO PROMPTL Y EVALUATE THE CONTENTS
SUBJECT : Landing Gear - - - MLG Solenoid Sequence Valve Latch And Retract
Software Logic Changes - - - ModSum 4- - - 126659
1. PLANNING INFORMA TION
A. Effectivity
Aircraft Affected:
In- - -Service: DHC- - -8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003 thru 4534.

### Page 4

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 2 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
Pre - - - Requisite ModSum Title
4Q126420 Production - - - Landing Gear - - - Proximity Sensor
System PSEU Logic Update - - - Introduction of P/N
30145- - -0401
or
4Q126432 Retrofit - - - Landing Gear - - - Proximity Sensor
System PSEU Logic Update - - - Introduction of P/N
30145- - -0401 (SB 84- - -32- - -66)
Related ModSum Title
4Q126651 L a n d i n g G e a r --- P r o x i m i t y S e n s o r s --- P S E U ---
Introduction of PSEU 30145- - -0601
4Y124247 Landing Gear - - - MLG SSV Latch And Retract
Software Logic Changes
4Y124239 Landing Gear - - - MLG SSV Latch And Retract
Software Logic Changes
Production: Not Applicable
NOTE: The instructions in this service bulletin are only applicable to the
systems and parts installed at the time of delivery on the aircraft or as
changed by Bombardier Aerospace Service Bulletin(s). Before you do
this bulletin, examine all STC or equivalent action changes to make
sure this bulletin can be completed.
Spares Affected:
The following is a list of spares affected by this change. Review spares and
procurement systems to determine the existence of any listed parts. See
Paragraph 2.D., Existing Parts Accountability, for disposition.
Part Number Description
30145- - -0201/- - -0301/- - -0401 and - - -0501 PSEU

### Page 5

S.B. 84- - -32- - -143
Page 3 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
B. Reason
Problem: Existing PSEU software can permit inadvertent de- - -pressurization of the
MLG stabilizer brace unlock actuator under excessive vibration conditions,
and also could permit landing gear re traction without all gears being
w e i g h t --- o f f --- w h e e l s .
Solution: This service bulletin introduces ModSum 4- - -126659.
The ModSum replaces existing PSEU 30145- - -0201/- - -0301/- - -0401 and
- - -0501 with replacement PSEU 30145- - -0601.
PSEU 30145- - -0601 has new software that includes new logic equations to
latch power to the solenoid sequence valve (SSV), preventing
de- - -pressurization of the MLG stabilizer brace unlock actuator under
excessive vibration conditions. This new PSEU also includes revised
retraction logic that requires all gears to be weight- - -off- - -wheels before
permitting the landing gear to retract.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that follow:
- - - aircraft electrical power is removed
- - - each main landing gear is secured with lock pins installed thru each main gear and
main gear door mechanism
- - - the nose landing gear lock is engaged
- - - the existing PSEU P/N 30145- - -0201/- - -0301/- - -0401 or - - -0501 is removed
- - - the polarization keying of existing PSEU connector 3261- - -P1A/B/C is reworked
- - - reworked connector 3261- - -P1A/B/C is reidentified as 8MK4787- - -001
- - - replacement PSEU P/N 30145- - -0601 is installed and tested
- - - close out.
D. Compliance
Bombardier Inc. highly recommend that ModSum 4- - -126659 be incorporated at the
earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
Transport Canada Airworthiness Directive CF- - -2016- - -31.

### Page 6

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 4 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
E. Approval
The technical content of this service bulletin has been approved under the authority of
the Transport Canada Civil Aviation (TCCA) Design Approval Organization No: DAO
# 9 3 --- Q --- 0 2 .
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
T olerance Inspections (DTIs).
F. M a n p o w e r
It will take an estimated 6 man- - -hours to complete this service bulletin. The
breakdown of the man- - -hours is shown in the table that follows:
TASK M A N --- H O U R S
J o b S e t --- U p 0.25
Procedure 1.50
T e s t/R T S 4.00
Close- - -Out 0.25
This estimate is for direct labour done by an experienced crew and it does not
include, planning, familiarization, cure tim e, part fabrication, tool acquisition or lost
time.
G. Material - - - Price and Availability
Refer to merged UTC Aerospace Systems Service Bulletin 30145- - -32- - -131.
H. T ooling - - - Price and Availability
None
I. Weight and Balance
Not affected

### Page 7

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 5 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
J. Electrical Load Data
Not affected
K. Publications Affected
Aircraft Illustrated Parts Catalogue PSM 1- - -84- - -4....................
ModSums Manual PSM 1- - -84- - -12..................................
L. References
Revision ‘B’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8MK4787 1 --- A
ModSum 4- - -126659 Rev. - - -E
ModSum 4Q126659 Rev. - - -D
PCA 46031 Rev. 0 (for internal reference only)
Transport Canada Airworthiness Directive CF- - -2016- - -31
UTC Aerospace Systems Service Bulletin 30145- - -32- - -131 R1 dated Nov 4/16
2. MATERIAL INFORMA TION
A. Parts Required Per Aircraft
(1) Modification Kit 8MK4787- - -001.
(2) Detailed Kit Content:
Quantity Per Kit
--- 0 0 1
Part Number Description Remarks
1 30145- - -0601 PSEU see Note 2 below

### Page 8

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 6 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
NOTE 1: This service bulletin is self- - -contained (illustrated). No drawings will be
supplied.
NOTE 2: This item is required to install the kit. This item is not included in
the kit and must be procured by the customer.
Due to component availability, operators may receive a P/N
30145- - - 0601 PSEU or a P/N 30145- - - 0602 PSEU.
If in receipt of a P/N 30145- - - 0601 PSEU, declare this BA SB and
merged UTC Aerospace Systems VSB 30145- - - 32- - - 131.
If in receipt of a P/N 30145- - - 0602 PSEU, declare BA Service
B u l l e t i n 8 4 --- 3 2 --- 1 4 9 a n d m e r g e d V S B U T C A e r o s p a c e S y s t e m s
Service Bulletin 30145- - - 32- - - 134.
NOTE 3: PSEU part number (P/N) 30145- - -0601 is two way interchangeable with
p/n 30145- - -0602
NOTE 4: PSEU part number (P/N) 30145- - -0601 is one way interchangeable with
p/n 30145- - -0501 / - - -0401 / - - -0301 & - - -0201.
Listed drawings that are required to complete the kits above can be requested by
writing to the following e- - -mail address:
qseriesdwgrequest@aero.bombardier.com
B. Parts Required to Modify Spares
None
C. Special T ools and Equipment Required
None

### Page 9

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 7 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
D. Existing Parts Accountability
The following parts may be affected by this service bulletin. Indented parts are
components of the next higher assembly. The quantity (Qty.) column lists the quantity
that may be affected per aircraft for non- - -indented parts and the quantity per next
higher assembly for indented parts.
Existing
Part Number Description Qty. IC DC
New Part
Number PNC
30145- - -0201 PSEU 1 C SAL 30145- - -0601 S
30145- - -0301 PSEU 1 C SAL 30145- - -0601 S
30145- - -0401 PSEU 1 C SAL 30145- - -0601 S
30145- - -0501 PSEU 1 C SAL 30145- - -0601 S
IC Interchangeability Code
A Not interchangeable.
B Removed Part. No direct replacement.
C Interchangeable one way only.
DC Disposition
DIS Discard Part.
MUI Multiple Usage Item: Return to stock if serviceable.
RWK Rework existing part in accordance with this service bulletin.
RWI Rework existing part per .....
SAL Salvage. Return to operator’s stores or Goodrich.
PNC Part Number Code
N No equivalent Bombardier Inc. part number for reworked part. Indicate
on part that this service bulletin has been accomplished.
R Part number after rework.
S Superseding part number.
X Reworked part and superseding part are functionally and physically
equivalent but not identical.

### Page 10

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 8 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
3. ACCOMPLISHMENT INSTRUCTIONS
If it is not possible to complete all the instructions of this service bulletin because of the
configuration of the aircraft, speak with a representative of Bombardier in the CRC at
1- - -844- - -272- - -2720 (1- - -844- - -CRC- - -CRCO) or email at thd.qseries@aero.bombardier.com
for analysis and to get an approved disposition to complete this service bulletin.
A . J o b S e t --- U p
NOTE: Make sure to put a protective cover on any disconnected electrical
connector.
(1) Placard and select all aircraft electrical power to OFF . Obey all relevant
W A R N I N G S a n d C A U T I O N S ( r e f e r t o A M M T A S K ’ S 2 4 --- 0 0 --- 0 0 --- 8 6 1 --- 8 0 2 a n d
24- - -00- - -00- - -910- - -801).
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Set wheel chocks in front and behind the landing gear tires.
(5) Remove the front panel from the avionics rack.
B. Procedure
(1) Locate the existing PSEU P/N 30145- - -0201/- - -0301/- - -0401 or - - -0501 (refer to
Figure 1).
(2) Remove the existing PSEU P/N 30145- - -0201/- - -0301/- - -0401 or - - -0501 (refer to
PSM 1- - -84- - -2 (AMM) TASK 32- - -61- - -01- - -000- - -801).
(3) Rework the polarization keying of existing PSEU connector 3261- - -P1A/B/C as
follows:
(a) Gain access to the front of PSEU connector 3261- - -P1A/B/C on the mounting
tray (refer to Figure 2 VIEW A for connector location).

### Page 11

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 9 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
(b) Change the existing polarization posts positions as shown in Figure 2 VIEW B to
agree with applicable instructions given in PSM 1- - -84- - -2W Wiring Diagram
Manual (WDM) Chapter 20- - -17- - -51- - -401.
(c) Reidentify reworked connector as 8MK4787- - -001 to agree with applicable
instructions given in AMM TASK 20- - -00- - -01- - -910- - -802.
(4) Adjust the following proximity sensors to the new gaps given below as follows:
CAUTION: USE CAUTION NEAR THE FACE OF THE PROXIMITY SENSOR
BECAUSE YOU CAN CAUSE DAMAGE TO THE PROXIMITY
SENSOR.
(a) Remove and discard the lockwire from the jam nuts.
(b) Adjust the sensors to their nominal clearances, refer to T ables 1 & 2 that follow:
(5) Install PSEU P/N 30145- - -0601 (refer to applicable instructions in AMM TASK
32- - -61- - -01- - -400- - -801).
(6) Do an Inductance Value Check of the following proximity sensors:
(a) At the PSEU, use the SYSTEM STATUS MENU to make sure the inductance in
each sensor is Nominal Near.
NOTE: Adjust the sensors, as necessary, to get the permitted tolerances.
Make sure the right gear uplock and left gear uplock are disengaged
(uplock sensors indicating “FAR”) while right and/or left downlock
sensors (RGDLK1, RGDLK2, LGDLK1, LGDLK2) are adjusted.

### Page 12

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 10 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
TABLE 1
Sensor Name
(Abbreviation)
Near Gap
Nominal (inches)
Near Gap
To l e r a n c e ( i n c h e s )
Left Gear Downlock #1 (LGDLK1) 0.045 +0.005/- - -0.005
Left Gear Downlock #2 (LGDLK2) 0.045 +0.005/- - -0.005
Nose Gear Down #1 (NGDN1) 0.050 +0.005/- - -0.015
Nose Gear Down #2 (NGDN2) 0.050 +0.005/- - -0.015
Nose Gear Lock #1 (NGLK1) 0.050 +0.005/- - -0.005
Nose Gear Lock #2 (NGLK2) 0.050 +0.005/- - -0.005
Right Gear Downlock #1 (RGDLK1) 0.045 +0.005/- - -0.005
Right Gear Downlock #2 (RGDLK2) 0.045 +0.005/- - -0.005
TABLE 2
Inductance Check
Sensor Name
(Abbreviation)
Near Gap
To o C l o s e
mH
Nominal Near
mH
Near Gap T oo
Large
mH
Left Gear Downlock #1 (LGDLK1) 8.523 8.355 8.232
Left Gear Downlock #2 (LGDLK2) 8.523 8.355 8.232
Nose Gear Down #1 (NGDN1) 8.520 8.256 8.072
Nose Gear Down #2 (NGDN2) 8.520 8.256 8.072
Nose Gear Lock #1 (NGLK1) 8.438 8.302 8.196
Nose Gear Lock #2 (NGLK2) 8.438 8.302 8.196
Right Gear Downlock #1 (RGDLK1) 8.523 8.355 8.232
Right Gear Downlock #2 (RGDLK2) 8.523 8.355 8.232

### Page 13

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 11 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
(7) T orque the jam nut to 96 plus or minus 24 lbf.in (8.1 to 13. 6 N.m).
(8) Safety the jam nuts with lockwire.
(9) Make sure that the clearance did not change. Adjust the clearance if necessary.
(10) Power PSEU down then power up. Verify no active faults are present.
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) Re- - -install the front panel to the avionics rack.
(3) Wrap the removed PSEU in a protective cover and route to Goodrich, refer to
merged UTC Aerospace Systems Service Bulletin 30145- - -32- - -131 section 3.
ACCOMPLISHMENT INSTRUCTIONS for additional instructions.
(4) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 14

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 12 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
This Page Intentionally Blank

### Page 15

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 13 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
PSEU Removal / Installation
Figure 1
B

### Page 16

S E R V I C E B U L L E T I N 8 4 --- 3 2 --- 1 4 3
S.B. 84- - -32- - -143
Page 14 of 14
30 Jun 2016
LS
Revision ‘B’ 16 Nov 2016
PSEU Connector 3261- - - P1A/B/C Location - - - Rework
Figure 2
3X Polarization Posts
KEY 212
3261- - -P1A
3261- - -P1B
3261- - -P1C
VIEW A
VIEW B
1
1

### Page 17

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 18

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
