# De Havilland Canada Service Bulletin 84-32-168

Copy: Revision A ("SB 84-32-168 Rev A"), 12 pages: PDF https://openairdocs.org/files/sha256/dd/53/dd538246bec019a36df08e5e8cb0332e4d731e464e93c408534c906ce23bbc71; text https://openairdocs.org/service-documents/bombardier/sb-84-32-168/file/dd538246bec0.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0593; AD 2022-11-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md) (issued as De Havilland Canada)
- Type: Service bulletin (Service Bulletin)
- Number: 84-32-168
- Latest revision known: 84-32-168, Revision A, dated February 8, 2022 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-32-168

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-11-14](https://openairdocs.org/ad/2022-11-14.md), effective Jun 21, 2022: Revision A

## Text (12 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2022-0593; AD 2022-11-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Tx Ltr SB 84−32−168
Page 1 of 2
MP
Revision ‘A’ 08 Feb 2022
DHC−8 (DASH 8)
SERVICE BULLETIN 84−32−168
Landing Gear − Main Landing Gear − Lubrication of Main Landing Gear
This page transmits Revision ‘A’ of Service Bulletin 84−32−168, pages 1 thru 8,
dated 08 Feb 2022.
This service bulletin is re−issued in its entirety for the reasons that follow:
− The Effectivity section is revised
− The References section is revised to convey the latest revision of the service
bulletin and engineering documentation.
The Compliance in the previous issue of this service bulletin is not affected by this
revision. No additional rework to the aircraft is introduced by this revision.
Remove the previous revision of Service Bulletin 84−32−168 and replace with
attached.
Previous issues of Service Bulletin 84−32−168:
Initial issue − Pages 1 thru 8 dated 03 Dec 2021

### Page 2

SERVICE BULLETIN  84−32−168
Tx Ltr SB 84−32−168
Page 2 of 2
MP
Revision ‘A’ 08 Feb 2022
This Page Intentionally Blank
1

### Page 3

S.B. 84−32−16803 Dec 2021
MP
Page 1 of 8Revision ‘A’ 08 Feb 2022
SERVICE BULLETIN
ATA SYSTEM: 3211 NUMBER: 84−32−168
DE HAVILLAND AIRCRAFT OF CANADA LIMITED (DHC) CONSIDERS
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
THIS SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
SUBJECT: Landing Gear − Main Landing Gear − Lubrication of Main Landing Gear
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In−Service: DHC−8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003 through 4633.
NOTE: The instructions in this service bulletin are only applicable to the
systems and parts installed at the time of delivery on the aircraft or as
changed by DHC Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this
bulletin can be completed.
Spares Affected:
None
B. Reason
Problem: Two incidents of not being able to achieve the downlocked position on one
of the main landing gear have been observed.
Cause: Some aircraft utilization is low and standard greasing interval of 500FH
might not be achieved in the typical timeframe resulting in possibility of
deterioration of greasing effectiveness over time which can lead MLG
failing to achieve safe downlocked position.

### Page 4

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 2 of 8Revision ‘A’ 08 Feb 2022
Solution: The SB will perform inspection of the greasing records of main landing
gear to verify elapsed time from the last greasing operation per MRB TASK
320001−201. If elapsed time is 3 months or more, greasing operation will
be performed at the identified main landing gear joints.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that follow:
− Aircraft hydraulic power/pressure is removed
− Aircraft electrical power is removed
− The nose landing gear lock is engaged
− The main landing gear lock pins are installed thru each main gear and main gear door
mechanism
− Inspection of the main landing gear records is done
− Lubrication of the main landing gear at the joints is done as required
− Close out.
D. Compliance
De Havilland Aircraft of Canada Limited highly recommends that SB 84−32−168 be
incorporated at the earliest opportunity unless otherwise directed by the operator’s
airworthiness authority.
This Service Bulletin will be mandated by a pending Transport Canada Airworthiness
Directive.
E. Approval
The technical content of this service bulletin has been approved under the authority of
the Transport Canada Civil Aviation (TCCA) Design Approval Organization No: DAO
#19−Q−01.
A Transport Canada Airworthiness Directive Pending.

### Page 5

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 3 of 8Revision ‘A’ 08 Feb 2022
F . Manpower
It will take an estimated 1.00 man−hours to complete this service bulletin.
This estimate is for direct labour done by an experienced crew and it does not
include, planning, familiarization, cure time, part fabrication, tool acquisition or lost
time.
G. Material − Price and Availability
None
H. Tooling − Price and Availability
None
I. Weight and Balance
Not Affected
J. Electrical Load Data
Not Affected
K. Publications Affected
None
L. References
Revision ‘A’ of this service bulletin was prepared to the related data that follows:
PCA 48509 Revision 0 (for internal reference only).

### Page 6

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 4 of 8Revision ‘A’ 08 Feb 2022
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
None
B. Parts Required to Modify Spares
None
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
A. Job Set−Up
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY
RETRACT . THIS CAN CAUSE INJURIES TO PERSONS AND
DAMAGE TO THE EQUIPMENT .
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS
CAN ACCIDENTALLY CLOSE THE LANDING GEAR DOORS. THIS
CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE
EQUIPMENT .
(1) Obey all the hydraulic safety precautions  (refer to AMM TASK
29−00−00−910−801).

### Page 7

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 5 of 8Revision ‘A’ 08 Feb 2022
(2) Make sure that all hydraulic pressure is off and that there is no pressure in the
hydraulic system (refer to AMM TASK 29−00−00−863−802 and TASK
29−00−00−863−804).
NOTE: Make sure that the park break pressure is not removed/released.
(3) Placard and select all aircraft electrical power to OFF . Obey all relevant
WARNINGS and CAUTIONS  (refer to AMM TASK 24−00−00−861−802 and
TASK 24−00−00−910−801).
(4) Make sure that lock pins are installed through each main gear.
(5) Make sure the nose gear ground lock is engaged.
(6) Set wheel chocks in front and behind the landing gear tires.
(7) Open and lock the main landing gear doors.
B. Procedure
(1) Review the maintenance records to verfiy the elapsed time and FH from the last
greasing operation on main landing gear.
(2) If it has been over 3 months since the last greasing, perform greasing on lock
actuator assembly, stabilizer brace to nacelle structure attachment, downlock
assembly, stabilizer brace pivot, stabilizer brace to yoke attachment and retractor
actuator lug end as per AMM TASK 12−20−01−640−803  (refer to Figure 1).
C. Close Out
(1) Remove all tools and equipment from the work area.

### Page 8

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 6 of 8Revision ‘A’ 08 Feb 2022
MAIN LANDING GEAR
1. Stabilizer brace to nacelle structure
attachment (6 places).
2. Stabilizer brace to yoke attachment
(6 places).
Grease gun
LUBRICATION METHOD
2
Be careful with the lubrication fittings
at the locations identified. Make sure
the fittings are clean, not loose and
correctly installed after lubrication.
LEGEND
Left and right side.
Left and right stabilizer.
NOTES
cg6223a01.dg, cm, sep09/2021
1
Lubrication of Main Landing Gear
Figure 1 (sheet 1 of 3)

### Page 9

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 7 of 8Revision ‘A’ 08 Feb 2022
Lubrication of Main Landing Gear
Figure 1 (sheet 2 of 3)
66
3
3
5
4
4
44
Grease gun
LUBRICATION METHOD
An asterisk (    ) is shown adjacent
to the lubrication points where it is
necessary to use the MS 24203
nozzle.
NOTES
Be careful with the lubrication fittings
at the locations identified. Make sure
the fittings are clean, not loose and
correctly installed after lubrication.
Fittings facing inboard and outboard.
Left and right stabilizer.
Spring assembly removed for clarity.4
LEGEND
3. Lock actuator assembly
(5 places).
4. Downlock assembly
(11 places).
5. Stabilizer brace pivot
(6 places).
6. Retraction actuator lug end
(2 places).
4
cg6223a02.dg, cm, sep09/2021

### Page 10

SERVICE BULLETIN  84−32−168
S.B. 84−32−16803 Dec 2021
MP
Page 8 of 8Revision ‘A’ 08 Feb 2022
Lubrication of Main Landing Gear
Figure 1 (sheet 3 of 3)
LEGEND
3
04−03
3. Lock actuator assembly
(5 places).
Grease gun
LUBRICATION METHOD
An asterisk (    ) is shown adjacent
to the lubrication points where it is
necessary to use the MS 24203
nozzle.
NOTES
Grease fitting rotated into view.5
5
cg6223a03.dg, cm, sep09/2021

### Page 11

Oct 2019
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
DASH 8 AIRCRAFT
To : CMDB Focal
Email: cmdb.request@dehavilland.com
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
The data that you provide below will help us record the incorporation of this Service
Bulletin and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Email PDF to:
cmdb.request@dehavilland.com

### Page 12

Oct 2019
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - DASH 8 AIRCRAFT
To : SB Focal, DE HAVILLAND AIRCRAFT OF CANADA LIMITED
Phone: 1 (416) 373 - - -5098
Email: george.moffatt@dehavilland.com
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Email PDF to:
george.moffatt@dehavilland.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
