# Bombardier Service Bulletin 84-54-19

Copy: No revision named ("FAA-2015-3986 84-54-19"), 16 pages: PDF https://openairdocs.org/files/sha256/6b/36/6b366622a8773d28e1ec2897641b6377174c88dc1a0ec07b5ddd6f4cdeaea80f; text https://openairdocs.org/service-documents/bombardier/sb-84-54-19/file/6b366622a877.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3986; AD 2016-16-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-54-19
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-54-19

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-16-15](https://openairdocs.org/ad/2016-16-15.md), effective Sep 23, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-54-19/proposed.md).

## Text (16 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3986; AD 2016-16-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

D
S.B. 84-54-19
Page 1 of 14
18 Apr 2013
JR
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 5400 NUMBER: 84-54-19
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
SUBJECT: Nacelle - Special Inspection and Rectification of the A-Frame -
ModSum 4-113797
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4003 thru
4055.
Production: The radius increase was incorporated in production using
ModSum 4-113159 at Serial Numbers 4056 and subsequent.
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None

### Page 2

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 2 of 14
18 Apr 2013
JR
B. Reason
Problem: A field inspection on one of the aircraft revealed a condition that was
supposed to be corrected during the incorporation of Service Bulletin
84-54-04 (ModSums 4-113279 and 4-113305) was not accomplished. This
condition was an insufficient fillet radius on the A frame base flange.
S o l u t i o n : T h i ss e r v i c eb u l l e t i np r o v i d e si n s t r u c t i o n st od oa ni n s p e c t i o nt oc h e c kf o r
the insufficient fillet radius condition & cracks and to repair the condition
if existing.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- aircraft electrical power is removed
- the nose landing gear lock is engaged
- the main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- an inspection is done to check the A frame base flange for a insufficient fillet radius
and cracks
- if an insufficient fillet radius is found and no cracks are found, aircraft is rectified
using instructions provided in this service bulletin
- if cracks are found, operators are to contact the Help Desk/Action Center for further
instructions
- If sufficient fillet radius is found, aircraft can be returned to service.
- close out.
D. Compliance
Bombardier Inc. recommends incorpora tion of ModSum 4-113797 at the earliest
opportunity unless otherwise directed by the operator’s airworthiness authority.
A Transport Canada Airworthiness Directive is pending

### Page 3

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 3 of 14
18 Apr 2013
JR
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
Organization No: DAO #93-Q-02.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
Tolerance Inspections (DTIs).
F. Manpower
PART A - Inspection
It will take an estimated 1.50 man-hours to complete PART A of the
ACCOMPLISHMENT instructions in this s ervice bulletin. The breakdown of man
-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.25
Procedure in Part A 1.00
Test / RTS 0.00
Close-Out 0.25
PART B - Rectification
It will take an estimated 2.50 man-hours to complete PART B of the
ACCOMPLISHMENT instructions in this s ervice bulletin. The breakdown of man
-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.25
Procedure in Part
B
2.00
Test / RTS 0.00
Close-Out 0.25
For any on-site labor assistance, please speak with a Fleet Services representative
for a quote. The Fleet Services group can be contacted via the Q Series Technical
Help Desk by telephone at 416-375-4000 or email at:
thd.qseries@aero.bombardier.com

### Page 4

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 4 of 14
18 Apr 2013
JR
G. Material - Price and Availability
None
H. Tooling - Price and Availability
None
I. Weight and Balance
None
J. Electrical Load Data
Not affected
K. Publications Affected
ModSums Manual PSM 1-84-12..................................
L. References
The initial issue of this service bulletin was prepared to the engineering drawings
and related data that follows:
DRAWING SHEET REV
8DK4211 1 --
8Z9806 1 --
ModSum 4Q113797 Rev. ‘B’
ModSum 4-113797 Rev. ‘B’
PCA 44090 Revision 0 (for internal reference only)
A Transport Canada Airworthiness Directive is pending
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
None
(1) The following materials are required for the completion of this service bulletin
and may be procured as single items from Bombardier Aerospace Regional
Aircraft or purchased directly from industry sources.

### Page 5

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 5 of 14
18 Apr 2013
JR
For alternative equivalent materials, refer to Consumable Products Manual
(CPM) PSM 1-84-18.
Part Number Qty. Per Aircraft Description Alternative
Equivalent
DHMS C4.01
Type 2 (F19)
as required Primer Chromated
Epoxy
see CPM section
07-02
MIL-C-5541
(C1)
as required Chemical Conver-
sion Coating
see CPM section
07-29A
DHMS C4.04 (F24)
Type 4, Class A
as required Polyurethane
Enamel
see CPM section
07-08
B. Parts Required to Modify Spares
None
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
None
3. ACCOMPLISHMENT INSTRUCTIONS
A. Job Set-Up
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY
RETRACT. THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE
TO THE EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS
CAN ACCIDENTALLY CLOSE THE LANDING GEAR DOORS. THIS CAN
CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
(1) Placard and select all aircraft electrical power to OFF. Obey all relevant
WARNINGS and CAUTIONS (refer to AMM TASK’S 24-00-00-861-802 and
24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.

### Page 6

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 6 of 14
18 Apr 2013
JR
(3) Make sure the nose gear ground lock is engaged.
(4) Set up the work platforms or ladders as required to gain access to the A frame in
each nacelle. Make sure the work platforms or ladders are electrically grounded.
B. Procedure
Part A - Inspection
(1) On the left and right nacelle inspect the A-Frame aft face, base flange transition
adjacent to the drag strut fitting attachment to determine if a 0.500 + or - 0.03
inch radius is produced in the base flange of the A-Frame 8Z8527, refer to
Figure 6.
NOTE: Rework strap 8Z8534-103 is already manufactured with 0.500 + or - 0.03
inch radius
(2) If 0.500 + or - 0.03 inch radius already exists in base flange of A-Frame 8Z8527
at 2 locations per nacelle, no further work is required. Proceed to Close Out
section of this service bulletin.
(3) If 0.500 + or - 0.03 inch radius does not exist in base flange of A-Frame 8Z8527,
inspect area using eddy current crack detection or fluorescent dye penetrant per
Nondestructive Testing Manual, PSM 1-84-7A.
(4) If there are any cracks, contact Bombardier Help Desk/Action Center for
approved repair instructions.
(5) If there are no cracks, proceed to Part B - Rectification section of this service
bulletin.
Part B - Rectification
CAUTION: PROTECT HYDRAULIC LINES AND HARNESS’S NEAR REWORKED
AREA FROM DAMAGE DURING MATERIAL REMOVAL. (FIGURE 3)
(1) Remove material from A-Frame 8Z8527 as shown in Figure 6, Detail E.
NOTE: Care should be taken to maintain edge distance of 0.32 inch minimum to
hi-lite hole for drag strut, also make sure no damage to shear deck
8Z8536 and rework strap 8Z8534-103.
(2) Finish machined edges per Structural Repair Manual PSM 1-84-3, Chapter
51-14-00.
(3) Clean cut metal edges per Structural Repair Manual PSM 1-84-3, Chapter
51-26-00.

### Page 7

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 7 of 14
18 Apr 2013
JR
(4) Improve cut metal edges to achieve a surface finish of 125RMS or finer.
(5) Re-finish reworked areas using the following materials:
(a) Chemical Conversion Coating (C1) per Structural Repair Manual PSM
1-84-3 Task 51-21-10-02-02.
(b) Epoxy Primer (F19) per Structural Repair Manual PSM 1-84-3 Task
51-25-10-02-01.
(c) Polyurethane Enamel (F24) per Structural Repair Manual PSM 1-84-3 Task
51-25-15-02-01.
(6) Re-identify LH Frame as 8Z9806-001 and RH Frame as 8Z9806-002 per Aircraft
Maintenance Manual PSM 1-84-2 Task 20-00-01-910-801.
(7) After identification markings have dried, apply clear coat (no colour) of
Polyurethane Enamel (F24) per Structural Repair Manual PSM 1-84-3 Task
51-25-15-02-01.
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 8

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 8 of 14
18 Apr 2013
JR
Area of Work
Figure 1

### Page 9

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 9 of 14
18 Apr 2013
JR
A-Frame
Figure 2
A-FRAME
8Z8527
REWORK STRAP
8Z8534-103

### Page 10

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 10 of 14
18 Apr 2013
JR
Figure 3
A-FRAME
8Z8527
REWORK STRAP
8Z8534-103

### Page 11

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 11 of 14
18 Apr 2013
JR
Figure 4
REINFORCEMENT STRAP
8Z8534

### Page 12

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 12 of 14
18 Apr 2013
JR
Figure 5

### Page 13

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 13 of 14
18 Apr 2013
JR
Figure 6
EXISTING INSUFFICIENT FILLET RADIUS
DETAIL ‘E’ SYMMETRICAL ABOUT CENTER LINE OF EACH NACELLE
MAINTAIN 0.500 + or - 0.03 INCH RA-
DIUS
ON REWORK STRAP 8Z8534-103
A-FRAME
8Z8527
MATERIAL TO BE REMOVED
REWORK STRAP
8Z8534-103
(no rework necessary if 0.500 + or - 0.03 inch
radius exists)
A-FRAME
8Z8527

### Page 14

SERVICE BULLETIN 84-54-19
S.B. 84-54-19
Page 14 of 14
18 Apr 2013
JR
This Page Intentionally Blank.
1

### Page 15

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 16

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
