# Bombardier Service Bulletin 84-54-21

Copy: No revision named ("FAA-2015-3986 84-54-21 "), 16 pages: PDF https://openairdocs.org/files/sha256/67/79/6779ad77ddd57aa351ea972387378d3a772b9077c3d5676897d8f9af0879723b; text https://openairdocs.org/service-documents/bombardier/sb-84-54-21/file/6779ad77ddd5.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3986; AD 2016-16-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-54-21
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-54-21

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2016-16-15](https://openairdocs.org/ad/2016-16-15.md), effective Sep 23, 2016: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-54-21/proposed.md).

## Text (16 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2015-3986; AD 2016-16-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

D
S.B. 84-54-21
Page 1 of 14
09 May 2013
NB
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 5420 NUMBER: 84-54-21
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND
URGE OPERATORS TO PROMPTLY EVALUATE THE CONTENTS
SUBJECT: Nacelles - A-Frame - Retrofit - Fasteners Reversed for Clearance to
Retracted MLG Stabilizer Brace - ModSum 4-113774
1. PLANNING INFORMATION
A. Effectivity
Aircraft Affected:
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Numbers 4003 thru
4055.
Production: Aircraft Serial Numbers 4056 and subsequent do not have
fasteners installed in the affected zones because they have
Post-ModSum 4-113159 A-Frames.
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.

### Page 2

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 2 of 14
09 May 2013
NB
Spares Affected:
None
B. Reason
Problem: The clearance between the MLG stabilizer brace and the nacelle A-Frame
was reduced with the introduction of MLG stabilizer brace 46400-27 thru
Service Bulletin 84-32-93/ModSum 4-901992.
Solution: This service bulletin introduces ModSum 4-113774.
The ModSum reverses some fasteners to increase the clearance between
the MLG stabilizer brace and the nacelle A-Frame.
NOTE: If ModSum IS4Q5450002 was previously accomplished, no further action
is required.
If ModSum IS4Q5400016 was previously accomplished, the Procedure
section of this service bulletin must be accomplished.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- nose landing gear lock is engaged
- main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- pressure in the No. 1, 2 & 3 hydraulic systems is depleted
- all aircraft electrical power systems are selected to OFF
- work platforms or ladders are set up and properly grounded
- existing Hi-Lite fasteners are removed and replaced with new Hi-Lite fasteners with
collars on forward side
- reworked areas are re-finished with alodine, epoxy primer and polyurethane
enamel

### Page 3

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 3 of 14
09 May 2013
NB
- aircraft is lifted on jacks and landing gear is retracted
- clearance between fasteners/frame and MLG stabilizer brace in the reworked
a r e a si sm e a s u r e d
- Bombardier Technical Help Desk is conta cted if clearance is not within limits
- LH and RH A-Frame assemblies are re-identified and coated if clearance is
within limits
- landing gear is extended, aircraft is lowered and jacks are removed
- close out.
D. Compliance
Bombardier Inc. highly recommends that ModSum ModSum 4-113774 be
incorporated at the earliest opportunity unless otherwise directed by the operator’s
airworthiness authority.
A Transport Canada Airworthiness Directive is Pending.
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
Organization No: DAO #93-Q-02.
F. Manpower
It will take an estimated 3 man-hours to complete this service bulletin. The
breakdown of the man-hours is shown in the table that follows:
TASK MAN-HOURS
Job Set-Up 0.50
Procedure 2.00
Test / RTS 0.00
Close-Out 0.50

### Page 4

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 4 of 14
09 May 2013
NB
For any on-site labor assistance, please speak with a Fleet Services representative
for a quote. The Fleet Services group can be contacted via the Q Series Technical
Help Desk by telephone at 416-375-4000 or email at:
thd.qseries@aero.bombardier.com.
G. Material - Price and Availability
ModKit 8DK4199-001 is available throu gh the Customer Accounts Service Team at
Bombardier Aerospace Regional Aircraft division. Operators should submit a
purchase order specifying aircraft serial number(s) to:
Bombardier Aerospace
Customer Accounts Services Team (Mail Stop N11-32)
123 Garratt Blvd.
Toronto
Ontario
Canada M3K-1Y5
Facsimile: (416) 375-3060
Telephone: (416) 375-3920
Kit Number Description
8DK4199-001 Drawing Kit - Nacelle, A-Frame,
Fasteners
The part(s) and material(s) detailed in Paragraph(s) 2.A. and 2.B. may be either
furnished or fabricated from the operator’s existing stock, purchased as single
items from Bombardier Aerospace Regional Aircraft or purchased directly from
industry sources. DK parts are to be manufactured and approved locally (refer to
disclaimer in the related text or illustra tion). In some cases, an equivalent to the DK
part may be available from Bombardier under the production part number shown
as reference in Parts Required Per Aircraft.

### Page 5

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 5 of 14
09 May 2013
NB
H. Tooling - Price and Availability
None
I. Weight and Balance
None
J. Electrical Load Data
Not affected
K. Publications Affected
Dash 8 Illustrated Parts Catalogue PSM 1-84-4....................
ModSums Manual PSM 1-84-12..................................
L. References
The initial issue of this service bulletin was prepared to the engineering drawings
and related data that follows:
DRAWING SHEET REV
8DK4199 1 --
8Z9565 1 --
ModSum 4Q113774 Rev. ‘C’
ModSum 4-113774 Rev. ‘C’
ModSum 4-113159 Rev. ‘B’
ModSum IS4Q5450002 Rev. ‘B’
ModSum IS4Q5400016 Rev. ‘A’
PCA 44059 Revision 1 (for internal reference only)
Transport Canada Airworthiness Directive Pending.
2. MATERIAL INFORMATION
A. Parts Required Per Aircraft
(1) Drawing Kit 8DK4199-001

### Page 6

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 6 of 14
09 May 2013
NB
(2) Detailed Kit Content:
Quantity Per Kit
-001
Part Number Description Remarks
8 HST1070CY-5 Collar, Shear See NOTE 2
8 B0206002AG5-5 Pin, Shear, Csk See NOTE 2
- 8Z9565 Retrofit Drawing Drawing Only
- 8DK4199 Kit Drawing Only
NOTE 1 : This service bulletin is self-contained (illustrated ). No drawings will be
provided.
NOTE 2 : These items are required to install the kit. These items are not included
in the kit and must be supplied by the operator.
(3) In addition to the above part(s), the following material(s) are required for the
completion of this service bulletin and may be procured as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources.
Addresses of manufacturers and suppliers not shown below are listed in
either Maintenance Manual Chapter 20 or in Structural Repair Manual Chapter
51 or, for 400 Series Aircraft, in Consumable Products (CPM) Manual PSM
1-84-18.
Product ID No. Qty. Per Aircraft Description Specifications
07-02 1/4 Pint Primer, Chromated
Epoxy
DHMS C4.01 or
MIL-PRF-23377
07-08 1/4 Pint Coating, Polyure-
thane Enamel (F24)
MIL-PRF-85285
DHMS C4.04 Type 4
07-21 1/2 Ounce Coating, Chemical
Conversion
MIL-C-5541
NOTE: Refer to CPM PSM 1-84-18 for the list of approved consumable products
under each Product ID No., any of which can be used unless a note
states otherwise.

### Page 7

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 7 of 14
09 May 2013
NB
An epoxy primer conforming to DHMS C4.01 is available from:
Tempo Aerospace Inc.
205 Fenmar Drive
Weston, Ontario
M9L 2X4 Canada
Telephone: 416 746 2233
Fax: (416) 746-2235
Email: sales@tempo-aerospace.com
Website URL: http://www.tempo-aerospace.com
B. Parts Required to Modify Spares
None
C. Special Tools and Equipment Required
None
D. Existing Parts Accountability
The following parts may be affected by this service bulletin. Indented parts are
components of the next higher assembly. The quantity (Qty.) column lists the
quantity that may be affected per aircraft for non-indented parts and the quantity
p e rn e x th i g h e ra s s e m b l yf o ri n d e n t e dp a r t s .
Existing
Part Number Description Qty. IC DC
New Part
Number PNC
8Z8527-001 A-Frame (LH) 1 A RWK 8Z9565-001 R
8Z8527-002 A-Frame (RH) 1 A RWK 8Z9565-002 R
IC Interchangeability Code
A Not interchangeable.
B Removed Part. No direct replacement.
C Conditionally Interchangeable. Inst allation of superseded part negates the
intent of this service bulletin.

### Page 8

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 8 of 14
09 May 2013
NB
DC Disposition
DIS Discard Part.
MUI Multiple Usage Item: Return to stock if serviceable.
RWK Rework existing part in accordance with this service bulletin.
RWI Rework existing part per .....
SAL Salvage. Return to operator’s stores for salvage consideration.
PNC Part Number Code
N No equivalent Bombardier Inc. part number for reworked part. Indicate on
part that this service bulletin has been accomplished.
R Part number after rework.
S Superseding or equivalent part number.
X Reworked part and superseding part are functionally and physically
equivalent but not identical.
3. ACCOMPLISHMENT INSTRUCTIONS
NOTE: If ModSum IS4Q5450002 was previously accomplished, no action is required.
A. Job Set-Up
(1) Make sure the nose gear ground lock is engaged.
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Set wheel chocks in front and behind the landing gear tires.
(4) Deplete hydraulic pressure in the No. 1, 2 & 3 systems (refer to AMM TASKs
29-00-00-863-802 and 29-00-00-863-804).
(5) Install a warning sign on the external hydraulic connection.
(6) Placard and select all aircraft electrical power to OFF. Obey all relevant
WARNINGS and CAUTIONS (refer to AMM TASKs 24-00-00-861-802 and
24-00-00-910-801).

### Page 9

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 9 of 14
09 May 2013
NB
(7) Set up work platforms or ladders as required to gain access to the stabilizer
brace in the No.1 and/or No.2 wheel well. Make sure that the work platforms or
ladders are electrically grounded.
B. Procedure
(1) Rework the LH and RH A-Frames as follows (refer to Figure 1):
NOTE: If ModSum IS4Q5400016 was previously accomplished, the rework that
follows is applicable.
(a) Remove existing Hi-Lite fasteners (refer to Figure 1).
(b) Countersink holes on aft face.
(c) Clean, deburr and treat exposed surfaces with Alodine (Product ID No. 07-21)
and then apply epoxy primer (Product ID No. 07-02) and polyurethane enamel
(Product Id No. 07-08) on all applicable rework areas (refer to CPM PSM
1-84-18 and to applicable instructions in AMM TASKs 51-25-16-390-801,
51-25-26-370-801 and 51-25-31-370-801).
(d) Install new Hi-Lite fasteners with collar on forward side of A-Frame (refer to
applicable instructions in SRM 51-40-15).
(e) Measure the clearance between the fasteners/frame and MLG stabilizer
brace assembly in the reworked area as follows:
1 Lift the aircraft on jacks (refer to applicable instructions in AMM Task
07-10-00-582-801).
2 Retract the landing gear (refer to applicable instructions in AMM Task
32-31-00-867-801).
3 With the MLG in retracted position, measure the clearance between
the fasteners/frame and MLG stabilizer brace assembly in the
reworked areas as shown in Figure 2 per flagnote 2 in VIEW A
and SECTION E-E.
(f) If the minimum clearance is less than 0.100 in. (2.54 mm), before further flight,
contact the Q Series Technical Help Desk by telephone at 416-375-4000 or
email at: thd.qseries@aero.bombardier.com for approved disposition/action.

### Page 10

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 10 of 14
09 May 2013
NB
(g) If the clearance is equal or more than 0.100 in. (2.54 mm), re-identify the LH
A-Frame as 8Z9565-001 and RH A-Frame as 8Z9565-002. After the
identification markings have dried, apply a clear coat (no color) of
polyurethane enamel (Product ID No. 07-08) (refer to CPM PSM 1-84-18 and
to applicable instructions in AMM TASK 51-25-31-370-801).
(h) Extend the landing gear (refer to applicable instructions in AMM Task
32-31-00-867-801). Make sure no fouling condition exists during gear
extension. If fouling condition exists, contact Technical Help Desk by
telephone at 416-375-4000 or email at: thd.qseries@aero.bombardier.com
for approved disposition/action.
(i) Lower the aircraft on jacks and remove the jacks (refer to applicable
instructions in AMM Task 07-10-00-582-801).
C. Close Out
(1) Remove all tools and equipment from the work area.
(2) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 11

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 11 of 14
09 May 2013
NB
Rework - Nacelle A-Frame
Figure 1 (Sheet 1)
AREA OF REWORK

### Page 12

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 12 of 14
09 May 2013
NB
Rework - Nacelle A-Frame
Figure 1 (Sheet 2)
1
1

### Page 13

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 13 of 14
09 May 2013
NB
Nacelle A-Frame and MLG Stabilizer Brace - Clearance Measurement
Figure 2 (Sheet 1)
WITH THE MAIN LANDING GEAR RETRACTED, MEASURE THE CLEARANCE
BETWEEN THE FASTENERS/FRAME AND MLG STABILIZER BRACE.
A-FRAME
STABILIZER BRACE
A
2 2
2
2

### Page 14

SERVICE BULLETIN 84-54-21
S.B. 84-54-21
Page 14 of 14
09 May 2013
NB
STABILIZER
BRACE
STABILIZER
BRACE
WITH THE MAIN LANDING GEAR RETRACTED, MEASURE THE CLEARANCE
BETWEEN THE FASTENERS/FRAME AND MLG STABILIZER BRACE.
Nacelle A-Frame and MLG Stabilizer Brace - Clearance Measurement
Figure 2 (Sheet 2)
(MLG STABILIZER BRACE P/N 46400-27 AND SUBS)
MEASURE CLEARANCE, MUST BE
0.100 IN (2.54 MM) OR GREATER.
MEASURE CLEARANCE,
MUST BE 0.100 IN (2.54
MM) OR GREATER.
(MLG STABILIZER BRACE P/N 46400-25 AND PREV)
1

### Page 15

Jan 2009
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 16

Feb 2009
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
