# De Havilland Canada Service Bulletin 84-55-12

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision B ("SB 84-55-12 Rev B"), 24 pages: PDF https://openairdocs.org/files/sha256/5b/cf/5bcf702f1f0b58101a3385052558b8d49374dcb686451cb86dc03c447aa66a4b; text https://openairdocs.org/service-documents/bombardier/sb-84-55-12/file/5bcf702f1f0b.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-0933; AD 2024-02-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision A ("SB 84-55-12 Rev A"), 22 pages: PDF https://openairdocs.org/files/sha256/5f/d0/5fd05429c542ada62dd3bfc92a0885725cfa4ccfc9104798157f3fd855c8251f; text https://openairdocs.org/service-documents/bombardier/sb-84-55-12/file/5fd05429c542.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-0933; AD 2024-02-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md) (issued as De Havilland Canada)
- Type: Service bulletin (Service Bulletin)
- Number: 84-55-12
- Latest revision known: 84-55-12, Revision B, dated April 20, 2023 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-55-12

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-02-02](https://openairdocs.org/ad/2024-02-02.md), effective Mar 21, 2024: Revisions A and B

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-55-12/proposed.md).

## Text (24 pages)

Revision B, the newest copy. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2023-0933; AD 2024-02-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Tx Ltr SB 84-55-12
Page 1 of 2
AE
Revision ‘B’ 20 Apr 2023 
DHC-8 (DASH 8) 
SERVICE BULLETIN 84-55-12 
Horizontal Tail to Vertical Tail Attachment – Radius FillerNon-Conformance –
Special Inspection & Rectification 
This page transmits Revision ‘B’ of Service Bulletin 84-55-12, pages 1 thru 20, 
dated 20 Apr2023.
This service bulletin is re-issued in its entirety for the reasons thatfollow: 
- The Effectivity section is revised to delete the related ModSum 
- The Reason section is revised toadd instructions to rework the new radius fillers 
perGenericRD 8/4-55-2200 Issue 01 (RD 8/4-55-2206 Issue 02for SN4453 and 
4456) 
- The Description section is revised toadd instructions torework the new radius 
fillers per GenericRD 8/4-55-2200 Issue 01 (RD 8/4-55-2206Issue 02 for SN4453 
and 4456) 
- The Compliance section is revisedtoadd the Airworthiness Directive number 
- The References section is revised to convey the latest revision of service bulletin 
and engineering documentation 
- The Procedure section is revised toadd a Note under Part A – Inspection step 1
todefine the thickness of feeler gauge and add new step 6 underPart B –
Rectification to add instructions torework the new radius fillers perGeneric RD 
8/4-55-2200 Issue 01 (RD 8/4-55-2206 Issue 02 for SN4453 and4456) along with a
Note. The Note 7 understep 7 is revised toinclude the new P/Nofthe radius filler 
- The Legend Table ofFigure 4is revised to addan alternate R/D P/N and the latest 
P/Nfor radius filler 
- The Figure 4sheet 2 of 2 is revised tomodifythe flagnote 6. 
The Compliance in the previous issue(s) of this service bulletin is not affected by 
this revision. No additional rework to the aircraft is introduced by this revision. 
RemovethepreviousrevisionofServiceBulletin84-55-12a ndreplacewithattached. 
Previous issue(s) of Service Bulletin 84-55-12: 
Initial issue –Pages 1 thru 14 dated 07 Sep 2021 
Revision ‘A’ –Pages 1 thru 18 dated 16 Feb 2022

### Page 2

SERVICE BULLETIN 84-55-12
Tx Ltr SB 84-55-12
Page 2 of 2
AE
Revision ‘B’ 20 Apr 2023 
This Page Intentionally Blank 
1

### Page 3

S.B.84-55-12
AE
Revision‘B’20Apr2023 Page1of20 
07Sep2021 
SERVICE BULLETIN
ATASYSTEM: 5510 NUMBER: 84-55-12 
DE HAVILLAND AIRCRAFT OF CANADA LIMITED (DHC) CONSIDERS 
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS 
THIS SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND 
SUBJECT : Horizontal Tail to Vertical Tail Attachment – Radi us Filler 
Non-Conformance – Special Inspection & Rectification 
1. PLANNING INFORMA TION 
A. Effectivity 
AircraftAffected:
In-Service: DHC-8AircraftModels401and402SerialNumber s4001,4003 
thru4633.
NOTE: The instructions in this service bulletin are only applicable to the 
systemsandpartsinstalledatthetimeofdeliveryontheair craftoras 
changed by DHC Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this 
bulletincanbecompleted.
SparesAffected:
None

### Page 4

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page2of20 
07Sep2021 
B. Reason 
Problem:
Theradiusfilleronthefrontandtherear sparjointoftheho rizontaltailto 
theverticaltailcouldbemanufacturedtoowidetomeshwith inthetension 
fittings.Themiddlesparjointhasadifferentdesignandis notsubjected 
tothisissue.Gapsbetweenthetensionfittingsandtheradi usfillercould 
lead to improperly torqued joints and reduced pre-load in the bolt.
Reducedpre-loadcanleadtofailureofthebolt.Failureofm orethanone 
boltcanreducetheabilityoftheaircrafttoreacttoantici patedloadsand 
resultinuncontrolledflight.
Solution: Thisservicebulletinintroducesaspecialinspe ctionandrectification.
Adetailedvisualinspection(DVI)isconductedforsignsof gappingor
bendingoftheradiusfillerand/oradjacentwashers.
IfgappingorbendingisobservedonPost-ModSum4M155149ai rcraft,the 
radiusfiller,washers,PLIwasher,boltandbarrelnutarer eplaced.
IfgappingorbendingisobservedonPre-ModSum4M155149air craft,the 
radiusfiller,washers,boltandbarrelnutarereplaced.
Ifgappingofthereplacementradiusfillercontinues,then instructionsto 
reworkthenewradiusfillersaregivenpergenericRD8/4-55 -2200Issue 
01 (RD 8/4-55-2206 Issue 02 for SN 4453 and 4456), or later issues 
approvedbyTransportCanada.
C. Description 
Theproceduresinthisservicebulletingivetheinstructio nstodothetasksthatfollow:
- Aircraftelectricalpowerisremoved 
- Thenoselandinggearlockisengaged

### Page 5

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page3of20 
07Sep2021 
- Themainlandinggearlockpinsareinstalledthrougheachm aingearandmaingear
doormechanism 
- Workstandsorladdersaresetinpositiontogainaccesstot hehorizontalstab.
- Fairingsareremovedontheverticalstabilizerasrequire d 
- DVIisconductedforsignsofgappingontheradiusfilleror bendingofthewashers 
- Ifgappingorbendingoftheradiusfillerorwashersisobse rvedonPostModSum 
4M155149,theradiusfiller,washers,PLIwasher,boltandb arrelnutarereplaced 
- Ifgappingorbendingoftheradiusfillerorwashersisobse rvedonPreModSum 
4M155149,theradiusfiller,washers,boltandbarrelnutar ereplaced 
- Allfairingspreviouslyremovedarenowre-installed 
- Ifgappingofthereplacementradiusfillercontinues,the ninstructionstoreworkthe 
newradiusfillersaregivenpergenericRD8/4-55-2200Iss. 1(RD8/4-55-2206Iss.2
forSN4453and4465),orlaterissuesapprovedbyTransportC anada 
- Removealltools,equipmentandunwantedmaterialsfromth eworkarea 
- Logbookentriesaremade 
- Closeout.
D. Compliance 
DeHavillandAircraftofCanadaLimitedrecommendsthatthi sspecialinspectionand 
rectification service bulletin be done at the earliest opportunity unless otherwise 
directedbytheoperator’sairworthinessauthority.
ThisServiceBulletinwillbemandatedbyapendingTranspor tCanadaAirworthiness 
Directive.
TransportCanadaAirworthinessDirectiveCF-2022-21hasb eenissued.

### Page 6

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page4of20 
07Sep2021 
E. Approval 
Thetechnicalcontentofthisservicebulletinhasbeenappr ovedundertheauthorityof
the Transport Canada Civil Aviation (TCCA) Design ApprovalOrganization No: DAO 
#19-Q-01.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage 
ToleranceInspections(DTIs).
F . Manpower 
Part A – Inspection 
It will take an estimated 5.00 man-hours to complete PART A of the 
ACCOMPLISHMENT instructions in this service bulletin. Thebreakdown of man 
-hoursisshowninthetablethatfollows:
TASK MAN-HOURS 
JobSet-Up 2.00 
ProcedureinPartA
Inspection 
1.00 
Close-Out 2.00 
Part B – Replacement 
It will take approx. 2 additional man-hours to complete PART B of the 
ACCOMPLISHMENTinstructionsinthisservicebulletin.
TASK MAN-HOURS 
JobSet-Up NA 
ProcedureinPartB
Rectification 
2.00 
Test/RTS NA 
Close-Out NA

### Page 7

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page5of20 
07Sep2021 
G. Material – Price and Availability 
Notaffected 
H. Tooling – Price and Availability 
Notaffected 
I. Weight and Balance 
Notaffected 
J. Electrical Load Data 
Notaffected 
K. Publications Affected 
None 
L. References 
Revision ‘B’ of this service bulletin was prepared to the engineering drawings and 
relateddatathatfollows:
PCA48424Rev.0(forinternalreferenceonly)
GenericRD8/4-55-2200Issue01(RD8/4-55-2206Issue02for SN4453and4456)
ADCF2022-21.
2. MATERIAL INFORMA TION 
A. Parts Required Per Aircraft 
None

### Page 8

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page6of20 
07Sep2021 
B. Parts Required to Modify Spares 
None 
C. Special Tools and Equipment Required 
None 
D. Existing Parts Accountability 
None 
3. ACCOMPLISHMENT INSTRUCTIONS 
If it is not possible to complete all the instructions of thisservice bulletin because of the 
configuration of the aircraft, speak with a representativeof DHC at 1-855-310-1013 or
1-647-277-5820 or email at thd@dehavilland.com for analysis and to get an approved 
dispositiontocompletethisservicebulletin.
A. Job Set- Up
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING 
GEAR. MAKE SURE YOU ENGAGE THE NOSE GEAR LOCK. IF YOU 
DO NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY
RETRACT . THIS CAN CAUSE INJURIES TO PERSONS AND 
DAMAGE TO THE EQUIPMENT .
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR 
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS 
CAN ACCIDENTALLY CLOSE THE LANDING GEAR DOORS. THIS 
CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE 
EQUIPMENT .

### Page 9

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page7of20 
07Sep2021 
(1) Placard and select all aircraft electrical power to OFF.Obey all relevant
WARNINGS and CAUTIONS (refer to AMM TASK’S 24-00-00-861-802 and 
24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gear and main gear
doormechanism.
(3) Makesurethenosegeargroundlockisengaged.
(4) Setwheelchocksinfrontandbehindthelandinggeartire s.
(5) Setupworkplatformsasrequiredtogainaccesstothever tical/horizontalstab.
Makesuretheworkplatformsareelectricallygrounded.
(6) RemovepressurefromtheNo.1andNo.2hydraulicsystem( refertoAMMTASK 
29-00-00-863-802).
(7) Remove pressure from the No. 3 hydraulic system (refer toAMM TASK 
29-00-00-863-804).
(8) Remove the access panels and fairings that follow from the vertical stabilizer
(refer to applicable instructions in AMM TASK 06-41-00-992-804 & TASK 
55-32-00-000-801).
LOCATION ACCESS PANELS 
VerticalStabilizer 325GB,325BL,325BR,325CT,325DT,
325ET

### Page 10

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page8of20 
07Sep2021 
B. Procedure 
Part A – Inspection 
(1) Inspect radius filler and adjacent washers in the front spar and rear spar
horizontal/verticalstabilizerjointfittingasfollows( refertoFigure1,Figure2and 
Figure3):
(a) Usingaflashlight,inspectionmirror,magnifyingglas sandfeelergaugescheck 
forgapsorbendingbetweentheradiusfillerandadjacentwa shers.
NOTE: Utilization of minimum thickness feeler gauge is recommended (Use 
0.0015in.or0.0020in.feelergaugetocheckforgapping).
(2) Ifnogapsorbendingarefound,proceedto Part C – Close Out .
(3) Ifgapsorbendingarefound,proceedto Part B – Rectification .
Part B– Rectification 
(1) OnaircraftPre-ModSum4M155149,replaceradiusfiller ,washers,boltandbarrel
nut(refertoFigure4andFigure5).
(2) OnaircraftPost-ModSum4M155149,replacetheradiusfi ller,washers,bolt,PLI
washer and barrel nut at locations with gapping or bending asshown in the 
installationdrawing85517001(refertoFigure4andFigure 5).
(3) Whentheradiusfillerisremoved,inspectaffectedtens ion fittingfor damage.If
damageextendsbeyondthepaintandprimerlayers,contact“ TorontoHelpDesk 
at telephone number 1-855-310-1013 or 1-647-277-5820 or em ail at
thd@dehavilland.comforanapprovedrepair.
(4) Whentheradiusfillerisremoved,inspectthetensionfi ttingforcracksusingeddy 
current (preferred method) or fluorescent penetrant dye per Nondestructive 
TestingManualPSM1-84-7A.Nocrackindicationsareallowe d.
(5) Whenreplacinghardware,ensuretherearenogapswhenfi ttingtheradiusfiller
withinthetensionfitting.

### Page 11

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page9of20 
07Sep2021 
(6) Ifgappingisobservedwiththereplacementradiusfille r,thentheuseofgenericRD 
8/4-55-2200Issue01(RD8/4-55-2206Issue02forSN4453and 4456)ispermissible 
toreworktheradiusfillers.Iftheradiusfillersreworked toinstructionsintheRDdo 
not create a no gap condition, then call the Technical Help Desk at telephone 
number1-855-310-1013or1-647-277-5820oremailatthd@de havilland.com.
NOTE: ThereworkpergenericRD8/4-55-2200Issue01(RD8/4-55-22 06Issue 
02forSN4453and4456)areapplicableonlytosaddlewashers that
are new, but still exhibit fouling condition, and must not beused for
saddlewashersthatarealreadyusedinservice.
(7) InstallareplacementbarrelnutB0203073seriesandrel atedhardware(bolt,cradle,
retainer, washers and PLI washers if used) before next flight (for Pre ModSum 
4-155149aircraftrefertoFigure4Sheet1andforModSum4-1 55149aircraftreferto 
Figure4Sheet2).Inadditionrefertoapplicableinstructi onsinAMMandSRMTASKs 
andNOTESthatfollow:
- SRMTASK51-42-85-02-01(InstallationofBarrelNuts)
- AMMTASK55-10-00-400-801(InstallationoftheHorizonta lStabilizer)
- AMMTASK20-10-11-400-801(PLIWasherInstnMod4M155149a ircraft).
NOTE1: Makesuretoapplyacoatingofcorrosionpreventivecompoun dtothe 
shankofeachboltofthebarrelnutassemblybeforeinstalla tion. Make 
sure the threads of each bolt and the barrel nut is free of the 
compound.
NOTE2: Makesuretobrushapplyacoatingofcorrosionpreventiveco mpound 
to each bolt head, each plain washer and where installed eachPLI
washersafterreplacementofabarrelnut(refertoFigure5a nd6).
NOTE3: Treatanybaredsurfacewithalayerofalodineandepoxyprim er(refer
to applicable instructions in SRM TASK 51-21-10-02-01 and TASK 
51-25-10-02-01.
NOTE4: Allhardware(exceptPLIWashers)thatisre-usedmustbebef reeof
anystructuraldegradation,cracksorcorrosion. Replaceifnecessary.
PLIwasherscannotbere-usedandmustbereplaced.

### Page 12

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page10of20 
07Sep2021 
NOTE5: Afterfinalinstallationofthebarrelnutassemblythrough thefrontspar
fittinginspecttheshim(item13)tomakesureithasnotextr uded.
NOTE6: Atrearsparlocationmakesurethatthethickendoftheradiu sfilleris 
facingaft.
NOTE7: Whenre-installingtheboltattherearsparlocationmakesu rethatthe 
boltdoesnotbottomontothebarrelnutretainer.
- Ifthereisagapbetweentheboltandretainerafterthetorq uinghas 
beencompleted,nofurtheractionisrequired.
- Iftheboltisfoundtobottomoutontotheretainerbeforeor afterthe 
torquingoperationhasbeencompleted,removetheboltandd iscard 
the used PLI washer. Install plain washer MS20002-10 (0.062inch 
thick)betweenthenewPLIwasherandtheradiusfiller85517 197-107
or85517197-115.Aftercompletingtorquingoperation,mak esurethe 
threadedendoftheboltprotrudespastthebarrelnutaminim umofthe 
fullchamfer.
C. Close Out 
(1) Install the fairings and panels that follow to the vertical stabilizer (refer to 
applicable instructions in AMM TASK 06-41-00-992-804 & TAS K 
55-32-00-400-801).
LOCATION ACCESS PANELS 
VerticalStabilizer 325GB,325BL,325BR,325CT,325DT,
325ET 
(2) Removealltools,equipmentandunwantedmaterialsfrom theworkarea.
(3) Oncompletionofthisservicebulletin,makethefollowi ngentryintheappropriate 
logbooks:“ServiceBulletin84-55-12{HorizontalTailtoV erticalTailAttachment–
Radius Filler Non-Conformance – Special Inspection & Recti fication} 
accomplished.”

### Page 13

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page11of20 
07Sep2021 
Radius Filler incorrectly installed 
Figure 1
cg6262a01.dg, sk,feb14/2022 
IfRadiusFilleristoowide,deformationwilloccurwhileth e 
boltisbeingpreloaded.
- The deformation of the radius filler can cause cracking 
- The improperly seated PLI washer can give a false reading 
that the required pre-load is achieved (applicable to 
Post-ModSum 4M155149A/C only) 
- Loss of pre-load is expected for the joint 
Improperly seated PLI Washer 
(PLI Washer shown is applicable to 
Post-ModSum 4M155149A/C only) 
Radius Filler Bent 
This picture is for a radius 
filler incorrectly installed, 
but is used to show the effect. 
Note that there are no flat 
washers depicted in this picture.

### Page 14

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page12of20 
07Sep2021 
Gaps and Bends 
Figure 2
cg6261a01.dg, sk,feb14/2022 
BENDINGOFTHEWASHERS 
AFTERAPPLICATIONOFPRE-LOAD
GAPPINGBEFORE 
APPLICATIONOFPRE-LOAD
PLI washer shown in this Figure is only applicable to 
Post Modsum 4M155149 aircraft. 
Additional flat washers may be present in installation. 
NOTES 
1. 
2.

### Page 15

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page13of20 
07Sep2021 
Radius Filler with Gap 
Figure 3
GAP 
Thisviewshownispriortotensionboltandradiusfillerins tallation.
Thegapindicatedshouldnotexistifproperlyinstalled.

### Page 16

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page14of20 
07Sep2021 
Barrel Nut – General 
Figure 4 sheet 1 of 2
cg6254a01.dg, sk,feb14/2022 
14 
10 
11
29 
22 
16 
35 
15 
FRONTSPAR 
13 
17 
21 
23 
25 
24 
12 
18 
19 
36 
REAR 
FITTING 
FRONT 
FITTING 
REARSPAR 
4
LH side shown, RH side opposite. 
NOTES 
1. 
Torque bolt to 3300 to 4300 in/lbs. 
Torque bolt to 1900 to 2300 in/lbs. 
CIC applied here. 
5 After installation of the barrel nut assembly 
through the front fitting inspect the shim 
(item 13) to make sure it has not extruded. 
4
4
5
FORPREMODSUM4-155149AIRCRAFT 
Additional flat washers may be present 
in installation. 
8.

### Page 17

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page15of20 
07Sep2021 
Barrel Nut – General 
Figure 4 sheet 2 of 2
cg6254a02.dg, sk/sk, feb13/2023 
14 
27 
28 
29 
30 
16 
35 
15 
FRONTSPAR 
13 
32 
21 
34 
25 
24 
33 
REAR 
FITTING 
FRONT 
FITTING 
REARSPAR 
CIC applied here. 
After installation of the barrel nut assembly 
through the front fitting inspect the shim 
(item 13) to make sure it has not extruded. 
4
Tighten the bolt in accordance with instructions 
inAMM TASK 20-10-11-400-801.
6
7. If parts are in short supply, the PLI washer configuration 
can be used on Pre Modsum 4-155149, and likewise, 
Pre Modsum configuration can be used on 
Post Modsum configuration. 
4
5
4
6
6
5
LH side shown, RH side opposite. 
NOTES 
1. 
FORPOSTMODSUM4-155149AIRCRAFT 
8. Additional flat washers may be present in installation.

### Page 18

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page16of20 
07Sep2021 
NOTE: LegendforFigure4
NOTE: Parts are two-way interchangeable between pre and post mod 
4-155149aircraft
Find Number Part Number Description Remarks 
10 BACB30US12K80 BOLT
11 MS14183L-C12 COUNTERSUNKWASHER 
12 MS14183L-12 WASHER 
13 85517195-101 SHIM (forrefonlynotaf-
fectedbythisSB)
14 85517194-101 BUSHING (forrefonlynotaf-
fectedbythisSB)
15 DSC228-12 BARRELNUT Barrel Nut 
B0203073 replaces 
the DSC228 series 
16 NAS578-12A RETAINER 
17 BACB30US10K76 BOLT
18 MS14183L-C10 COUNTERSUNKWASHER 
19 MS14183L-10 WASHER 
20 85517196-103 SADDLEWASHER 
21 85517194-103 BUSHING 
22 85517197-101or
85517197-109
RADIUSFILLER AlternateP/N 
RD8/4-55-2200(or
RD8/4-55-2206for
SN4453and4456)
(Ifrequired)
23 85517197-103or
85517197-111
RADIUSFILLER AlternateP/N 
RD8/4-55-2200(or
RD8/4-55-2206for
SN4453and4456)
(Ifrequired)
24 DSC228-10 BARRELNUT Barrel Nut 
B0203073 replaces 
the DSC228 series 
25 NAS578-10A RETAINER 
27 BACB30US12K82 BOLT
28 62525-12-53.3 PLIWASHER 
29 MS20002-12 WASHER

### Page 19

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page17of20 
07Sep2021 
Find Number Remarks Description Part Number 
30 85517197-105or
85517197-113
RADIUSFILLER AlternateP/N 
RD8/4-55-2200(or
RD8/4-55-2206for
SN4453and4456)
(Ifrequired)
31 85517196-105 SADDLEWASHER 
32 BACB30US10K78 BOLT
33 62525-10-36.4 PLIWASHER 
34 85517197-107or
85517197-115
RADIUSFILLER AlternateP/N 
RD8/4-55-2200(or
RD8/4-55-2206for
SN4453and4456)
(Ifrequired)
35 85517198-101 FILLERPLATE 
36 MS20002-10 WASHER

### Page 20 (OCR)

SERVICE BULLETIN 84-55-12
Front Spar Bolt is easily accessible
as seen on the image to the left. CIC can be
applied to the bolt head region.
Front Spar - CIC Application
Figure 5
07 Sep 2021  Revision 'B' 20 Apr 2023  S.B. 84-55-12  Page 18 of 20
AE

### Page 21

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page19of20 
07Sep2021 
Figure 6
Rear Spar – CIC Application and Inspection 
BottomInteriorinspectionhole 
forrearsparbarrelnut

### Page 22

SERVICE BULLETIN 84-55-12
S.B.84-55-12
AE
Revision‘B’20Apr2023 Page20of20 
07Sep2021 
This Page Intentionally Blank 
1

### Page 23

Oct 2019
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
DASH 8 AIRCRAFT
To : CMDB Focal
Email: cmdb.request@dehavilland.com
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
The data that you provide below will help us record the incorporation of this Service
Bulletin and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Email PDF to:
cmdb.request@dehavilland.com

### Page 24

Oct 2019
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - DASH 8 AIRCRAFT
To : SB Focal, DE HAVILLAND AIRCRAFT OF CANADA LIMITED
Phone: 1 (416) 373 - - -5098
Email: george.moffatt@dehavilland.com
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Email PDF to:
george.moffatt@dehavilland.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
