# Bombardier Service Bulletin 84-55-17

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("SB_84-55-17"), 26 pages: PDF https://openairdocs.org/files/sha256/79/5a/795a76f024a7f2c72c1fe359042412499a9d0fa14a86033b45c5065a7fc99ea3; text https://openairdocs.org/service-documents/bombardier/sb-84-55-17/file/795a76f024a7.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-5402, the docket of AD 2026-08-07. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("SB84-55-17"), 26 pages: PDF https://openairdocs.org/files/sha256/6b/bd/6bbd0fe7e7afa3df1c4b453b2d597cdd4125762c0986647c5b4da36a6d2f094d; text https://openairdocs.org/service-documents/bombardier/sb-84-55-17/file/6bbd0fe7e7af.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-0482, the docket of AD 2025-19-05. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-55-17
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-55-17

## Text (26 pages)

No revision named, the newest copy. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2025-5402, the docket of AD 2026-08-07. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

S.B. 84-55-17
Page 1 of 24
02 May 2024 
KC
SERVICE BULLETIN
ATA SYSTEM: 5500 NUMBER: 84-55-17
DE HAVILLAND AIRCRAFT OF CANADA LIMITED (DHC) CONSIDERS 
URGES OPERATORS TO PROMPTLY EVALUATE THE CONTENTS 
THIS SERVICE BULLETIN TO BE PARTICULARLY SIGNIFICANT AND 
SUBJECT: Stabilizers – Horizontal Stabilizer Rear Spar Elevator Power Control 
Unit (PCU) Brackets (Fittings) Replacement – ModSum 4-114087
1. PLANNING INFORMA TION 
A. Effectivity 
Aircraft Affected: 
In-Service: DHC-8 Aircraft Models 401 and 402 Serial Number s 4001, 4003 
thru 4580. 
Related ModSum Title 
4-113983 Empennage – Horizontal Stabilizer – Rear Spar 
Elevator PCU Bracket Replacement & Inspection 
of the Elevator Front Spar Web (SB 84-55-09)
4-180055 Empennage – Horizontal Stabilizer – Rear Spar 
Elevator PCU Bracket Redesign 
NOTE: The instructions in this service bulletin are only applicab le to the 
systems and parts installed at the time of delivery on the aircraft or as 
changed by DHC Service Bulletin(s). Before you do this bulle tin, 
examine all STC or equivalent action changes to make sure thi s 
bulletin can be completed.

### Page 2

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 2 of 24
02 May 2024 
KC
Spares Affected: 
The following is a list of spares affected by this change. Review spares and 
procurement systems to determine the existence of any liste d parts. See 
Paragraph 2.D., Existing Parts Accountability, for disposition. 
Part Number Description 
85517347-001 PCU FTG Assy, LH 
85517347-002 PCU FTG Assy, RH 
B. Reason 
Problem: Current PCU fittings (brackets) do not account for force-fight loads from 
mis-rigged elevator PCUs. Force-fight loads from mis-rigged elevator 
PCUs, when superimposed with fitting flange installation preload may be 
sufficient to cause the fatigue cracking. 
Solution: This service bulletin is issued to replace the exi sting PCU fittings with 
improved PCU fittings at all 6 locations in aircraft unless they have been 
replaced through service bulletin 84-55-09 (ModSum 4-113983)
New PCU fittings have increased bottom flange and lug thickness, larger 
fillet radii, increased wall height between lugs and more gradual wall
thickness step changes. 
These redesigned fittings have improved fatigue life when subject to 
higher than anticipated force fight and installation pre-loads.
C. Description 
The procedures in this service bulletin give the instructions to do the tasks that follow: 
- Aircraft electrical power is removed 
- The nose landing gear lock is engaged 
- Themainlandinggearlockpinsareinstalledthrougheachm aingearandmaingear 
door mechanism 
- Pressure from the hydraulic systems is removed 
- Access panels are removed 
- Elevators are removed 
- Power Control Units (PCUs) are removed

### Page 3

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 3 of 24
02 May 2024 
KC
- Installed PCU fitting are checked for part numbers 
- If all installed PCU fittings are 85517347-003/85517347-004, then the elevator PCUs 
are rigged and close out is completed 
- if installed PCU fittings are 85517347-001/85517347-002, PCU fittings are removed 
- Elevator torque tubes are removed, if required 
- Hydraulic lines are removed, if required 
- Eddy current inspection is done 
- New PCU fittings are located using locating tool
- Hole pattern from the spar web is transferred to PCU fittings 
- Shims are bonded to the rear spar 
- Sealant is applied to all the mating surfaces 
- New PCU fittings are installed 
- Locating tool is removed 
- Hydraulic lines are installed, if removed 
- Elevator torque tubes are installed, if removed 
- PCUs are installed 
- Elevators are installed 
- Rigging of all six PCUs is done 
- Access panels are installed 
- Close-out 
D. Compliance 
De Havilland Aircraft of Canada Limited highly recommends that ModSum 4-114087
be incorporated at the earliest opportunity unless otherwise directed by the operator’s 
airworthiness authority.
A Transport Canada Airworthiness Directive Pending. 
E. Approval 
The technical content of this service bulletin has been approved under the authority of 
the Transport Canada Civil Aviation (TCCA) Design ApprovalOrganization No: DAO 
#19-Q-01.
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage 
Tolerance Inspections (DTIs).

### Page 4

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 4 of 24
02 May 2024 
KC
F. Manpower 
It will take an estimated 48.00 man-hours to complete this se rvice bulletin. The 
breakdown of the man-hours is shown in the table that follows: 
TASK MAN-HOURS 
Job Set-Up 1.00 
Procedure 40.00 
Test / RTS 5.00 
Close-Out 2.00 
This estimate is for direct labour done by an experienced crew and it does not 
include, planning, familiarization, cure time, part fabrication, tool acquisition or lost 
time. 
G. Material – Price and Availability 
The Modification Kit required to do this service bulletin islisted in the table below.
Kit Number Description 
8MK4729-001 Retrofit Kit – PCU Fitting Instl, HSTAB 
Operators should submit a purchase order through the Customer Response Center 
(CRC) to the Customer Accounts Service Team (CAST) at DHC specifying aircraft 
serial number(s). Submit the purchase order to: 
De Havilland Aircraft of Canada Limited 
Material Services 
5800 Explorer Drive 
Mississauga 
Ontario 
Canada L4W 5K9 
DHC Phone Numbers :
North America:Toll Free: 1-855-310-1013 or 
Direct: 1-647-277-5820
DHC Emails: 
Parts: Europe, Middle East, Africa, and Russia: emear.parts@dehavilland.com 
Americas and Rest of World: parts@dehavilland.com

### Page 5

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 5 of 24
02 May 2024 
KC
H. Tooling – Price and Availability 
For tool rentals, contact the Customer Response Center (CRC) Kits Team at 
1-855-310-1013 or 1-647-277-5820 or email: kits@dehavilland.com. 
I. Weight and Balance 
NOTE: Weight and Balance changes are only required if replacing any fitting. 
A/C Type and 
Model Weight (Lb) Arm (Inches) 
Moment 
(Inches x Lb) 
x 0.001 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-001 
PCU #1 (Y-90.50)
+0.13 1049.72 0.14 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-001 
PCU #2 (Y-82.50)
+0.13 1049.72 0.14 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-001 
PCU #3 (Y-70.50)
+0.13 1049.72 0.14 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-002
PCU #1 (Y+90.50) 
+0.13 1049.72 0.14 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-002
PCU #2 (Y+82.50) 
+0.13 1049.72 0.14 
DHC-8 Model 401, 402 
Kit – 8MK4729-001 
8Z10650-002
PCU #3 (Y+70.50) 
+0.13 1049.72 0.14 
J. Electrical Load Data 
Not affected

### Page 6

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 6 of 24
02 May 2024 
KC
K. Publications Affected 
Aircraft Maintenance Manual PSM 1-84-2........................
Aircraft Illustrated Parts Catalog PSM 1-84-4.....................
ModSums Manual PSM 1-84-12 .................................
Weight and Balance Manual (Imperial) PSM 1-84-8...............
Weight and Balance Manual (Metric) PSM 1-84-8M.................
L. References 
The initial issue of this service bulletin was prepared to the engineering drawings and 
related data that follows: 
DRAWING SHEET REV 
8MK4729 1 -
8Z10650 1 -
ModSum 4Q114087 Rev. ‘A’ 
ModSum 4-114087 Rev. ‘A’
Transport Canada Airworthiness Directive CF-2018-34 effective 2018-12-31 
PCA 47136 Revision 0 (for internal reference only).
2. MATERIAL INFORMA TION 
A. Parts Required Per Aircraft 
(1) Modification Kit 8MK4729-001
(2) Detailed Kit Content: 
Quantity Per Kit 
-001 Part Number Description Remarks 
24 B0206017TP8 Collar See Note below 
12 B0206016CY8 Collar See Note below 
72 B0206016CY5 Collar See Note below

### Page 7

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 7 of 24
02 May 2024 
KC
Quantity Per Kit 
-001 Remarks Description Part Number 
12 B0206003AG8-9 Pin See Note below 
12 B0206003AG8-6 Pin See Note below 
12 B0206002AG8-4 Pin See Note below 
72 B0206001AG5-6 Pin See Note below 
REF 8Z10650 Retrofit Dwg only 
6 CSP469A-115-340 Shim 
6 85517244-101 Shim 
3 85517347-004 PCU FTG 
Assy, RH 
3 85517347-003 PCU FTG 
Assy, LH 
NOTE: These items are not included in the kit and must be supplied bythe 
operator. Quantity is shown for replacement of all PCU fittings. Replace 
only 85517347-001 and 85517347-002 fittings. 
Listed drawings that are required to complete the kits abovecan be requested by 
writing to the following email address: 
dwg.request@dehavilland.com 
(3) In addition to the above part(s), the following material (s) are required for the 
completion of this service bulletin and may be procured as single items from 
DHC or purchased directly from industry sources. 
Each consumable product listed in the table below is given its own unique 
Product ID Number. The number is used to identify a particular recommended 
product, the specifications and the trade names any of which can be used 
unless specified otherwise (refer to PSM 1-84-18, Consumab le Products 
Manual).

### Page 8

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 8 of 24
02 May 2024 
KC
Consumable 
Product ID 
Number 
Qty. Per 
Aircraft Description Remarks 
06-02 A/R Sealant, Corrosion In-
hibiting 
DHMS S3.06 C-80 
Alternative Proseal
P/S 870 C-12 
Sealant to 
MIL-PRF-81733 
05-01 A/R Adhesive, Room Tem-
perature 
Curing, 
Polychloroprene 
Rubber-Based 
DHMS A6.11Type 1
Class 1
07-02 A/R Primer, Fluid-Resistant,
Chromate Epoxy (F19) 
DHMS C4.01Type 2
B. Parts Required to Modify Spares 
None 
C. Special Tools and Equipment Required 
Reference Designation Remarks 
8Z10178-001-58 Locating Tool See Figures 6 thru 10 
D. Existing Parts Accountability 
The following parts may be affected by this service bulletin . Indented parts are 
components of the next higher assembly. The quantity (Qty.)column lists the quantity 
that may be affected per aircraft for non-indented parts andthe quantity per next 
higher assembly for indented parts. 
Existing 
Part Number Description Qty. IC DC New Part Number PNC 
85517347-001 PCU FTG Assy, LH 3 C DIS 85517347-003 S
85517347-002 PCU FTG Assy, RH 3 C DIS 85517347-004 S

### Page 9

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 9 of 24
02 May 2024 
KC
IC Interchangeability Code 
A Not interchangeable. 
B Removed Part. No direct replacement. 
C Conditionally Interchangeable. Installation of superse ded part negates the 
intent of this service bulletin. 
DC Disposition 
DIS Discard Part. 
MUI Multiple Usage Item: Return to stock if serviceable. 
RWK Rework existing part in accordance with this service bulletin. 
RWI Rework existing part per drawing.
SAL Salvage. Return to operator’s stores for salvage consideration. 
PNC Part Number Code 
N No equivalent DeHavilland part number for reworked part. I ndicate on 
part that this service bulletin has been accomplished. 
R Part number after rework. 
S Superseding or equivalent part number.
X Reworked part and superseding part are functionally and ph ysically 
equivalent but not identical. 
3. ACCOMPLISHMENT INSTRUCTIONS 
If it is not possible to complete all the instructions of thisservice bulletin because of the 
configurationoftheaircraft,speakwitharepresentative ofDHCintheCRCat1-855-310-1013or
1-647-277-5820oremailatthd@dehavilland.com foranalysisandtogetanapproveddisposition 
to complete this service bulletin. 
A. Job Set-Up 
WARNING: PUT SAFETY DEVICES, WARNING SIGNS, AND WARNING 
PLACARDSINPOSITIONBEFOREYOUSTARTAPROCEDUREONOR 
NEAR FLIGHT CONTROLS, FLIGHT CONTROL SURFACES OR 
COMPONENTS THAT MOVE. MAKE SURE THAT THERE ARE NO 
PERSONS OR EQUIPMENT ON OR NEAR THE FLIGHT CONTROL 
SURFACES. ACCIDENTAL MOVEMENT OF THE FLIGHT CONTROLS 
CAN CAUSE INJURIES TO PERSONS AND/OR DAMAGE TO 
EQUIPMENT.

### Page 10

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 10 of 24
02 May 2024 
KC
WARNING: MAKE SURE SURE THAT THE HYDRAULIC PRESSURE IS OFF, AND 
THAT THERE IS NO PRESSURE IN THE HYDRAULIC SYSTEM. IF YOU 
DO NOT DO THIS YOU CAN CAUSE INJURIES TO PERSONS AND 
DAMAGE TO THE EQUIPMENT.
WARNING: OBEY ALL THE HYDRAULIC SAFETY PRECAUTIONS WHEN YOU DO 
WORK ON THE HYDRAULIC SYSTEM OR A HYDRAULIC SYSTEM 
COMPONENT. IF YOU DO NOT DO THIS, YOU CAN CAUSE INJURIES 
TO PERSONS AND DAMAGE TO EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS ON THE MAIN LANDING 
GEAR.MAKESUREYOUENGAGETHENOSEGEARLOCK.IFYOUDO 
NOT DO THIS, THE LANDING GEAR CAN ACCIDENTALLY RETRACT.
THIS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO THE 
EQUIPMENT.
WARNING: MAKE SURE YOU INSTALL THE LOCKPINS IN THE DOOR 
MECHANISMS OF THE MLG AND NLG. THE DOOR MECHANISMS 
CAN ACCIDENTALLY CLOSETHELANDING GEARDOORS.THIS CAN 
CAUSE INJURIES TO PERSONS AND DAMAGE TO THE EQUIPMENT.
(1) PlacardandselectallaircraftelectricalpowertoOFF. ObeyallrelevantWARNINGS 
and CAUTIONS (refer to AMM TASK 24-00-00-861-802 and TASK 
24-00-00-910-801).
(2) Make sure that lock pins are installed through each main gearandmain geardoor 
mechanism. 
(3) Make sure the nose gear ground lock is engaged. 
(4) Set wheel chocks in front and behind the landing gear tires. 
(5) Obey all the hydraulic safety precautions (refer to AMM TASK 29-00-00-910-801). 
(6) Removepressurefromthehydraulicsystems(refertoAMM TASK29-00-00-863-802 
and TASK 29-00-00-863-804).

### Page 11

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 11 of 24
02 May 2024 
KC
(7) Set up the work platforms or ladders to gain access to horizontal stabilizer. Make 
sure the work platforms or ladders are electrically grounded. 
(8) Removetheaccesspanelsthatrequiredtogainaccesstor eworkarea(refertoAMM 
TASK 55-11-00-992-801, TASK 55-21-00-992-801 and Figure 1). 
B. Procedure 
(1) Remove the elevators (refer to AMM TASK 27-34-01-000-801). 
(2) Remove the elevator Power Control Units (PCUs) (refer toAMM TASK 
27-31-36-000-801). 
(3) If required for access, remove the elevator torque tubes (refer to AMM TASK 
27-31-46-000-801).
(4) If required for access, remove the hydraulic lines (refe r to AMM TASK 
29-00-00-000-802).
(5) CheckwhetherPCUfittings85517347-001/-002or855173 47-003/-004areinstalled 
at each location (refer to Figure 4). 
(6) If all six PCU fittings are 85517347-003/-004, do the Close Out. 
(7) If any PCU fitting is 85517347-001/-002, then remove anddiscard the PCU fitting, 
shims and associated hardware (refer to Figure 2). 
NOTE 1: Do not remove the PCU fittings 85517347-003/-004, if already installed. 
NOTE 2: Remove and replace one PCU fitting at a time. 
(8) IfPCUfittings85517347-001/-002areremoved,dotheed dycurrentinspectionatall
matingholesonthesparwebassembly85517044andthelowers kin(refertoNDT 
PSM 1-84-7A, PART 6, TASK 51-00-05-250-801, Figure 2 and Figure 5). 
(9) Locate the new PCU fittings 85517347-003/-004 with tool8Z10178-001-58 (refer to 
Figures 6 thru 10). 
(10) Afterfittingsarelocated,transferthe holepattern f rom sparwebandopenholesin 
PCU fitting to full size (refer to drawing 8Z10650 and Figure3).

### Page 12

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 12 of 24
02 May 2024 
KC
(11) Touch-up all unpainted surfaces with fluid-resistant(F19) chromate epoxy primer 
(refer to drawing 8Z10650, Figure 2, Figure 3 and SRM TASK 51-25-10-02-01).
(12) BondshimsCSP469A-115-340and85517244-101torearsp arandlowerskinusing 
adhesive 05-01 (refer to drawing 8Z10650, Figure 3, Figure 5, and AMM TASK 
51-21-11-340-801).
(a) Peel the shims as required to fill the gap. 
(13) Install new fittings 85517347-003 (LH) and/or 85517347-004 (RH) using hi-lite
fasteners (refer to drawing 8Z10650, Figure 3 and SRM TASK 51-40-15-02-01). If 
required, install with first oversize hi-lite fasteners. 
(14) Fay seal all mating surfaces with sealant 06-02 or Proseal P/S 870 C-12 sealant to 
MIL-PRF-81733 (refer to AMM TASK 51-23-00-390-801).
(15) Remove the locating tool 8Z10178-001-58. 
(16) If removed, install the hydraulic lines (refer to AMM TASK 29-00-00-400-802).
(17) Ifremoved,installtheelevatortorquetubes(referto AMMTASK27-31-46-400-801).
(18) Install the elevator PCUs (refer to AMM TASK 27-31-36-400-801). 
(19) Install the elevators (refer to AMM TASK 27-34-01-400-801). 
C. Close Out 
(1) Do the rigging of all six PCUs (refer to AMM TASK 27-31-36-830-801).
(2) Remove all tools and equipment from the work area. 
(3) Install the access panels that are removed (refer to AMM TASK 55-11-00-992-801 
and TASK 55-21-00-992-801).
(4) Iffittingsarereplaced,onincorporationofthisModSu m,addtheweightandbalance 
data shown in Section I of this service bulletin to the Weightand Balance Manual
PSM 1-84-8 (1-84-8M). Under ‘Description of Change’ enter “ModSum 4-114087
incorporated”.

### Page 13

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 13 of 24
02 May 2024 
KC
(5) On incorporation of this ModSum, make an entry that conforms to local regulatory 
requirements in the applicable logbook(s). Enter component serial numbers if 
applicable. Enter this ModSum number only after complete an d functional
incorporation of all work defined in this service bulletin.

### Page 14

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 14 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 1
cg6547a01.dg,nn,mar12/2024 
8Z10650-002
8Z10650-001

### Page 15

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 15 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 2
cg6547a02.dg,nn,mar12/2024 
RIB11
Y-96.500
PCU1
Y-90.500
RIB10 
Y-86.500
PCU2
Y-82.500
RIB9
Y-76.500
PCU3
Y-70.500
RIB8
Y-66.500
85517044 
H.STAB 
UPRL.L 
Z0.000 
H.STAB 
LWR L.L 
UP 
REMOVEANDDISCARD,PCUFTGASSY 
85517347-001LH 
85517347-002RH 
REMOVEAND DISCARD,SHIMS 
85517244-101ANDCSP469A-115-340
REMOVEANDDISCARDASSOCIATEDHARDWARE 
REMOVEANDDISCARD,PCUFTGASSY 
85517347-001LH 
85517347-002RH 
REMOVEANDDISCARD,SHIMS 
85517244-101AND CSP469A-115-340
REMOVEANDDISCARDASSOCIATEDHARDWARE 
PREMOD 
LOOKINGFORWARDNORMALTO
REARSPARDATUM 
ASSY8Z10650-001,LHSHOWN 
ASSY8Z10650-002,RHOPPOSITE

### Page 16

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 16 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 3
cg6547a03.dg,nn,mar12/2024 
RIB11
Y-96.500
PCU 1
Y-90.500
RIB10 
Y-86.500
PCU2
Y-82.500
RIB9
Y-76.500
PCU 3
Y-70.500
85517044 
H.STAB 
UPRL.L 
Z0.000 
H.STAB 
LWR L.L 
COLLAR 
B0206016CY5 
PIN 
B0206001AG5-6
FARSIDE 
COLLAR 
B0206017TP8 
PIN 
B0206003AG8-6
FAR SIDE 
COLLAR 
B0206017TP8 
PIN 
B0206003AG8-9
FARSIDE 
PCU FTGASSY,LH 
85517347-003
SHOWN 
PCUFTGASSY,RH 
85517347-004
OPPOSITE 
SHIM 
85517244-101
SHIM 
CSP469A-115-340
5 6
POSTMOD 
LOOKINGFORWARDNORMALTO
REARSPARDATUM 
ASSY8Z10650-001,LHSHOWN 
ASSY8Z10650-002,RHOPPOSITE 
555
6 6 6
RIB8
Y-66.500

### Page 17

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 17 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 4
cg6547a04.dg,nn,apr16/2024 
ASSY85517347-001,SHOWN 
ASSY85517347-002,OPPOSITE 
COMPARISONOFFITTINGS 
ASSY85517347-003,SHOWN 
ASSY85517347-004,OPPOSITE 
COMPARISONOFFITTINGS

### Page 18

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 18 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 5
cg6547a05.dg,nn,mar12/2024 
X1.340 
Y-90.500
Z-3.100
(PCU 1) 
X1.340 
Y-82.500
Z-3.100
(PCU 2) 
X1.340 
Y-70.500
Z-3.100
(PCU 3) 
REARSPARDATUM 
H.STABUPRL.L 
85517044 
3.100in.
1.340+0.003in.-H.STABLWRL.L 
PCUFTGASSY,LH 
85517347-003
PCUFTGASSY,RH 
85517347-004
SHIM 
85517244-101
COLLAR 
B0206016CY8 
PIN 
B0206002AG8-4
(QTY2) 
UP 
Z0.000 
(QTY16)

### Page 19

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 19 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 6
cg6547a06.dg,nn,apr19/2024 
1.SettoolwithprimarylocatoratPCU#3positionandwith”a lign” 
setPCU#2with”align”andPCU#1at”repair”.AllLHorRHasap plicable.
2.LocatetoolatPCU#2and#3using”align”bearingsandstep pedpins.
3.ClamptoolhardupatPCU#3firstthenadjustPCU#2bearing
againstoutboardfaceofbushing.RefertosectionJ-J(Figu re10).
4.LockPCU#2inplaceusingbothcollarsonshaft.Clampaspe rPCU#3.
5.AdjustPCU#1locatoragainstoutboardfaceofbushingand
lockinplacewithbothcollars.RefertosectionJ-J(Figure 10).
6.Clamptoolagainstlowersurfaceusingtheaftadjacentto rquethumb 
screwuntilitclicks.Item 001105shouldbeincontactwithl owersurface.
RefertosectionH-H(Figure10).
7.PullindexingpinatPCU#1androtatelocatorafttofacili tate 
removalofdamagedbracket.
8.PreparereplacementbracketandR/Spar.
9.PositionnewPCUbracketonR/SparandrotateandpinPCU#1 locator.
10.Insertsteppedpinandclampreplacementbrackethardup against
outboardfaceofbushing.
11.Preparelaminatedshimsasrequiredanddrill.
PCU#1RERAIRPROCESS 
PCU 
#3 
PCU 
#2 
PCU 
#1 
ADJACENTTORQUE 
THUMBSCREW 
001113 
JIGPIN 
001103 
CL-30-JP
CL-527-TSB
PRIMARYLOCATOR 
ASSEMBLY
002001

### Page 20

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 20 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 7
cg6547a06.dg,nn,apr19/2024 cg6547a07.dg,nn,apr19/2024 
1.SettoolwithprimarylocatoratPCU#1positionandwith”a lign” 
setPCU#3with”align”andPCU#2at”repair”.AllLHorRHasap plicable.
2.LocatetoolatPCU#1and#3using”align”bearingsandstep pedpins.
3.ClamptoolhardupatPCU#1firstthenadjustPCU#3bearing
againstoutboardfaceofbushing.RefertosectionJ-J(Figu re10).
4.LockPCU#3inplaceusingbothcollarsonshaft.Clampaspe rPCU#1.
5.AdjustPCU#2locatoragainstoutboardfaceofbushingand
lockinplacewithbothcollars.RefertosectionJ-J(Figure 10).
6.Clamptoolagainstlowersurfaceusingtheaftadjacentto rquethumb 
screwuntilitclicks.Item 001105shouldbeincontactwithl owersurface.
RefertosectionH-H(Figure10).
7.PullindexingpinatPCU#2androtatelocatorafttofacili tate 
removalofdamagedbracket.
8.PreparereplacementbracketandR/Spar.
9.PositionnewPCUbracketonR/SparandrotateandpinPCU#2 locator.
10.Insertsteppedpinandclampreplacementbrackethardup against
outboardfaceofbushing.
11.Preparelaminatedshimsasrequiredanddrill.
PCU#2RERAIRPROCESS 
PCU 
#3 
PCU 
#2 
PCU 
#1 
ADJACENTTORQUE 
THUMBSCREW 
001113 
JIGPIN 
001103 
CL-30-JP
CL-527-TSB
PRIMARYLOCATOR 
ASSEMBLY
002001

### Page 21

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 21 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 8
cg6547a08.dg,nn,apr19/2024 
1.SettoolwithprimarylocatoratPCU#1positionandwith”a lign” 
setPCU#2with”align”andPCU#3at”repair”.AllLHorRHasap plicable.
2.LocatetoolatPCU#1and#2using”align”bearingsandstep pedpins.
3.ClamptoolhardupatPCU#1firstthenadjustPCU#2bearing
againstoutboardfaceofbushing.RefertosectionJ-J(Figu re10).
4.LockPCU#2inplaceusingbothcollarsonshaft.Clampaspe rPCU#1.
5.AdjustPCU#3locatoragainstoutboardfaceofbushingand
lockinplacewithbothcollars.RefertosectionJ-J(Figure 10).
6.Clamptoolagainstlowersurfaceusingtheaftadjacentto rquethumb 
screwuntilitclicks.Item 001105shouldbeincontactwithl owersurface.
RefertosectionH-H(Figure10).
7.PullindexingpinatPCU#3androtatelocatorafttofacili tate 
removalofdamagedbracket.
8.PreparereplacementbracketandR/Spar.
9.PositionnewPCUbracketonR/SparandrotateandpinPCU#3 locator.
10.Insertsteppedpinandclampreplacementbrackethardup against
outboardfaceofbushing.
11.Preparelaminatedshimsasrequiredanddrill.
PCU#3RERAIRPROCESS 
PCU 
#3 
PCU 
#2 
PCU 
#1 
ADJACENTTORQUE 
THUMBSCREW 
001113 
JIGPIN 
001103 
CL-30-JPCL-527-TSB
PRIMARYLOCATOR 
ASSEMBLY
002001

### Page 22

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 22 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 9
cg6547a09.dg,nn/nn,apr23/2024 
TOOLSTEADY 
002135 
NUTHANDLEASSEMBLY
002007 
(QTY3) 
JIGPIN 
001103(QTY3) 
CL-30-JP
O’SIZES.SWASHER 
001109(QTY2) 
1.25ODX0.578ID 
(91525A418) 
S.SSHCSCREW 
001111(QTY2) 
9/16-12UNCX1.0 
(92196A693) 
TOOLIDLABEL 
001115 
TS.061.11.11MK2 
25.3in.
(REF) 
0.6in.
VIEWLOOKINGFORWARD 
NORMALTOR/SPAR 
PCU1
-90.500
REF 
PCU2
-82.500
REF 
RIB9
-76.500
REF 
PCU3
-70.500
REF 85517342R/SPAR REF 
85517347PCUFTG 
REF 
CLAMPPIN 
ASSEMBLY
002005 
(QTY3) 
-3.100
REF 
SECONDARY
LOCATORASSEMBLY
002003 
S.SSHCSCREW 
001101(QTY4) 
1/4-20UNCX11/4 
(92196A544) 
PRIMARY
LOCATORASSEMBLY
002001 
LOCATORLOCK 
002133 
(QTY4) 
SECONDARY
LOCATORASSEMBLY
002003 
UP AFT 
UP 
VIEWLOOKINGINBOARD 
GENERALASSEMBLY
001001 
PCU#2REPAIRSCHEME 
SHOWN 
1.340 
REF 
HSTAB 
LWRLOFT 
LINEREF 
8.7in.
(REF) 
6.0in.
(REF) 
G G

### Page 23

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 23 of 24
02 May 2024 
KC
Horizontal Stabilizer Rear Spar – Elevator PCU – Bracket Replacement – Retrofit 
Figure 10 
cg6547a10.dg,nn,apr19/2024 
8.7in.
(REF) 
THOMSON ROUNDSHAFT 
002131 
PRIMARY
LOCATORASSEMBLY
002001 
PRIMARYLOCATOR 
FACE 
LOCATOR 
FACE 
LOCATOR 
FACE 
STDDOWEL 
001107 
5/16DIA.X11/2LG.
P.FIT 
SWIVELCONTACTBOLT
001105(QTY2) 
CL-MF25-2502
ADJACENTTORQUE 
THUMBSCREW 
001113 
ADJACENTTORQUE 
THUMBSCREW 
001113 HSTAB LWRLOFT 
LINEREF 
CL-527-TSB
CL-527-TSB TOOLSTEADY 002135

### Page 24

SERVICE BULLETIN 84-55-17
S.B. 84-55-17
Page 24 of 24
02 May 2024 
KC
This Page Intentionally Blank

### Page 25

Oct 2019
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
DASH 8 AIRCRAFT
To : CMDB Focal
Email: cmdb.request@dehavilland.com
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
The data that you provide below will help us record the incorporation of this Service
Bulletin and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Email PDF to:
cmdb.request@dehavilland.com

### Page 26

Oct 2019
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - DASH 8 AIRCRAFT
To: SB Focal, DE HAVILLAND AIRCRAFT OF CANADA LIMITED   
Phone: 1-844-359-3428
Email: SB.Comments@dehavilland.com 
From:
Company:
Phone: Extn:
Facsimile: Date:
Email:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Email PDF to:
SB.Comments@dehavilland.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
