# Bombardier Service Bulletin 84-57-26

Copy: Revision C ("84-57-26C"), 20 pages: PDF https://openairdocs.org/files/sha256/27/c4/27c4dafb2b1e94758dde72817551220853fa730cef48af2672ed8066e1087ca9; text https://openairdocs.org/service-documents/bombardier/sb-84-57-26/file/27c4dafb2b1e.md. Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2019-0493; AD 2019-20-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bombardier](https://openairdocs.org/service-documents/bombardier.md)
- Type: Service bulletin (Service Bulletin)
- Number: 84-57-26
- Latest revision known: 84-57-26, Revision C, dated July 16, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bombardier/sb-84-57-26

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-20-09](https://openairdocs.org/ad/2019-20-09.md), effective Nov 27, 2019: Revisions A, B and C

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/bombardier/sb-84-57-26/proposed.md).

## Text (20 pages)

Rights: © Bombardier Inc. Filed by the FAA in regulations.gov docket FAA-2019-0493; AD 2019-20-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Revision ‘C’ 16 Jul 2018
D H C --- 8 ( D A S H 8 )
S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
Wing - - - Center Wing, Front Spar (Y42.00) - - - Material Change - - -
Replacement of Wing / Fuse T ension Bolts & Barrel Nuts - - - ModSum
4 - - - 113769
This page transmits Revision ‘C’ of Service Bulletin 84- - -57- - -26, pages 1 thru
16, dated 16 Jul 2018.
This service bulletin is re- - -issued in its entirety for the reasons that follow:
--- t h eMATERIAL - - - Price and Availabilitysection is revised to convey the
latest contacts information
--- t h eReferences section is revised to convey the latest revision of the service
bulletin and engineering documentation
--- t h eMATERIAL INFORMATION section is revised to include some
alternative part numbers
--- t h eACCOMPLISHMENT INSTRUCTIONS section is revised to add the
paragraph with help desk contact information for approved disposition
--- t h eJ o b S e t --- U psection is revised to add a note and update access panels
and the referenced figures and AMM T asks
--- Procedure section is revised to re- - -arrange and include additional steps
and a warning with minor corrections to the existing steps and part
numbers. Note before the step (1) is deleted
--- t h eClose Out section is revised to add a note and update access panels
and the referenced AMM T asks
--- Figure 5 is revised to add fastener details and additional information.
The Compliance in the previous issue(s) of this service bulletin is not
affected by this revision. No additional rework to the aircraft is introduced by
this revision.
Remove the previous issue of Service Bulletin 84- - -57- - -26 and replace with
attached.
Previous issue(s) of Service Bulletin 84- - -57- - -26:
Initial issue - - - Pages 1 thru 14 dated 21 Mar 2013
Revision ‘A’ - - - Pages 1 thru 14 dated 18 Jul 2014
Revision ‘B’ - - - Pages 1 thru 16 dated 26 Feb 2015

### Page 2

(No text on this page.)

### Page 3

D
S . B . 8 4 --- 5 7 --- 2 6
Page 1 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
SERVICE BULLETIN
Customer
Support
ATA SYSTEM: 5712 NUMBER: 84- - -57- - -26
BOMBARDIER AEROSPACE REGIONAL AIRCRAFT CONSIDER THIS
SERVICE BULLETIN TO BE PARTICULARL Y SIGNIFICANT AND
URGE OPERATORS TO PROMPTL Y EVALUATE THE CONTENTS
SUBJECT : Wing - - - Center Wing, Front Spar (Y42.00) - - - Material Change - - -
Replacement of Wing / Fuse T ension Bolts & Barrel Nuts - - -
ModSum 4- - - 113769
1. PLANNING INFORMA TION
NOTE: This service bulletin is the closing action for Bombardier Service
Bulletin A84- - - 57- - - 25.
A. Effectivity
Aircraft Affected:
In- - -Service: DHC- - -8 Aircraft Models 401 and 402 Serial Numbers 4001,
4003 thru 4437.
Production: DHC- - -8 Aircraft Model 402 Aircraft Serial Numbers 4433,
4434, 4438 and 4439 were reworked using equivalent
In- - -House Rework ModSum 4Y123841.
ModSum 4Y123841 was removed from Serial Numbers 4433
and 4434 using ModSum 4Y123855. The Inconel hardware
was removed restoring the original alloy steel configuration.
These aircraft will have to be reworked in- - -service via
ModSum 4- - -113769 to install the Inconel hardware again.
Equivalent Production ModSum 4Q113768 will be installed
before delivery on applicable DHC- - -8 Aircraft at Serial
Numbers 4440 and subsequent.

### Page 4

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 2 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
NOTE: The instructions in this service bulletin are only applicable to the systems
and parts installed at the time of delivery on the aircraft or as changed by
Bombardier Aerospace Service Bulletin(s). Before you do this bulletin,
examine all STC or equivalent action changes to make sure this bulletin
can be completed.
Spares Affected:
None
B. Reason
Problem: During scheduled maintenance, an Operator found cracks in a blue dot
barrel nut and cradle at one of the four spar locations. The three remaining
locations were checked and in each case the cradles and the barrel nuts
were not cracked. The investigation determined that the cracks were due
to hydrogen embrittlement.
As a result, Alert Service Bulletin A84- - -57- - -25 was issued requiring
Operators to check that all front spar attachment bolts are properly
preloaded and to do a borescope inspection of barrel nuts. Operators
reported finding cracked barrel nuts and it was decided that a change in
material was required.
This SB addresses the root cause of the failures by introducing hardware
made from Inconel material that is not susceptible to hydrogen
embrittlement.
Solution: Service Bulletin 84- - -57- - -26 has been issued requiring Operators to
remove and replace the existing bolts and barrel nuts made from alloy steel
to bolts and barrel nuts made from Inconel 718 which is more resistant to
hydrogen embrittlement. In addition, the existing pre load indicating (PLI)
washers made from alloy steel are removed and replaced with PLI washers
made from A286 Cres.
C. Description
The procedures in this service bulletin give the instructions to do the tasks that
follow:
- - - aircraft is put into standard configuration for maintenance
- - - aircraft electrical power is removed
- - - the nose landing gear lock is engaged
- - - the main landing gear lock pins are installed thru each main gear and main gear
door mechanism
- - - wing root access panels are opened

### Page 5

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 3 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
- - - four existing barrel nuts, retainers and PLI washers located at the wing to fuselage
front spar joint are removed and replaced with four new barrel nuts, retainers and
PLI washers
- - - close out.
D. Compliance
Bombardier Inc. highly recommend that ModSum 4- - -113769 be incorporated at
the earliest opportunity unless otherwise directed by the operator’s airworthiness
authority.
Transport Canada Airworthiness Directive CF- - -2011- - -24R1 is pending
E. Approval
The technical content of this service bulletin has been approved under the
authority of the Transport Canada Civil Aviation (TCCA) Design Approval
O r g a n i z a t i o n N o : D A O # 9 3 --- Q --- 0 2 .
This service bulletin does not affect Airworthiness Limitations (AWLs) or Damage
T olerance Inspections (DTIs).
F. M a n p o w e r
It will take an estimated 8.00 man- - -hours to complete this service bulletin. The
breakdown of the man- - -hours is shown in the table that follows:
TASK M A N --- H O U R S
J o b S e t --- U p 2.00
Procedure 4.00
T e s t/R T S 0.00
Close- - -Out 2.00
For any on- - -site labor assistance, please speak with a Fleet Services representative for
a quote. The Fleet Services group can be contacted via the Q Series T echnical Help
Desk by telephone at 416- - -375- - -4000 or email at: thd.qseries@aero.bombardier.com

### Page 6

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 4 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
G. Material - - - Price and Availability
The ModKit(s) required to do this service bulletin is/are listed in the table below:
Kit Number Description
8MK4614- - -001 Retrofit Kit - - - Center Wing, Front Spar,
T ension Bolt & Barrel Nut Replacement
Operators should submit a purchase orde r through the Customer Response Center
(CRC) to the Customer Accounts Service T eam (CAST) at Bombardier Aerospace
Commercial Aircraft division specifying aircraft serial number(s) to:
Bombardier Aerospace
Customer Accounts Services T eam (Mail Stop N11- - -32)
123 Garratt Blvd.
To r o n t o
Ontario
Canada M3K- - -1Y5
E- - -mail addresses:
International: cast.international@aero.bombardier.com
European: ps_emea@aero.bombardier.com
Americas East: cast.americaseast@aero.bombardier.com
Americas West: cast.americaswest@aero.bombardier.com
T elephone:
North America:T oll Free +1- - -844- - -CRC- - -CRC0 (+1- - -844- - -272- - -2720) or direct
+1- - -514- - -855- - -8500
Facsimile:
International: (416) 373- - -5966
Americas East: (416) 373- - -5964
Americas West: (416) 375- - -5965
H. T ooling - - - Price and Availability
None
I. Weight and Balance
None

### Page 7

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 5 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
J. Electrical Load Data
Not affected
K. Publications Affected
Dash 8 Illustrated Parts Catalogue PSM 1- - -84- - -4....................
ModSums Manual PSM 1- - -84- - -12..................................
L. References
Revision ‘C’ of this service bulletin was prepared to the engineering drawings and
related data that follows:
DRAWING SHEET REV
8MK4614 1 B
8Z9545 1 D
ModSum 4Q113769 Rev. ‘H’
ModSum 4- - -113769 Rev. ‘H’
ModSum 4Q113768 Rev. ‘E’
ModSum 4Y123841 Rev. ‘D’
ModSum 4Y123855 Rev. ‘A’
PCA 43791 Revision 2 (for internal reference only)
MRB TASK 533004E203 (for reference only)
S B A 8 4 --- 5 7 --- 2 5
Transport Canada Airworthiness Directive CF- - -2011- - -24R1 pending

### Page 8

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 6 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
2. MATERIAL INFORMA TION
A. Parts Required Per Aircraft
(1) Modification Kit 8MK4614- - -001, Retrofit Kit - - - Center Wing, Front Spar,
T ension Bolt & Barrel Nut Replacement
(2) Detailed Kit Content:
Quantity Per Kit
--- 0 0 1
Part Number Description Remarks
1 8Z9545 Retrofit drawing
1 8MK4614 Retrofit Kit drawing
4 B0201089- - -16- - -38 Bolt
4 B0202042- - -16- - -85.5 PLI Washer
4 B0203072- - -16S Barrel Nut
(3) In addition to the above part(s), the following material(s) are required for the
completion of this service bulletin and may be procured as single items from
Bombardier Aerospace Regional Aircraft or purchased directly from industry
sources. The use of equivalent materials listed in the Consumable Products
Manual PSM 1- - -84- - -18 is acceptable.
Addresses of manufacturers and suppliers not shown below are listed in
Consumable Products Manual PSM 1- - -84- - -18.
Consumable
Product ID
Number
Qty. Per Aircraft Description
06- - -02 1/2 Quart Sealant or equivalent
07- - -01A 1/2 Quart Corrosion Preventative Compound, F13 Grade 2
or equivalent

### Page 9

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 7 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
Part Number Qty. Per Aircraft Description
B0206004AG5- - -7
(HST13AG5- - -7)
16 H i --- L i t e
B0206017TP- - -5
(HST1488TP- - -5)
(HST1087TF- - -5)
16 Collar
B0206004AG6- - -7
(HST13AG6- - -7)
16, as required H i --- L i t e , O v e r s i z e d
B0206017TP- - -6
(HST1488TP- - -6)
(HST1087TF- - -6)
16 Collar, Oversized
B. Parts Required to Modify Spares
None
C. Special T ools and Equipment Required
None
D. Existing Parts Accountability
The following parts may be affected by this service bulletin. Indented parts are
components of the next higher assembly. The quantity (Qty.) column lists the
quantity that may be affected per aircraft for non- - -indented parts and the quantity
p e rn e x th i g h e ra s s e m b l yf o ri n d e n t e dp a r t s .
Existing
Part Number Description Qty. IC DC
New Part
Number PNC
MS21250- - -16038 Bolt 4 A DIS B0201089- - -16- - -38 N
62524- - -16- - -85.5 PLI Washer 4 A DIS B0202042- - -16- - -85.5 N
DSC228- - -16 Barrel Nut 4 A DIS B0203072- - -16S N

### Page 10

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 8 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
IC Interchangeability Code
A Not interchangeable.
B Removed Part. No direct replacement.
C Conditionally Interchangeable. Inst allation of superseded part negates the
intent of this service bulletin.
DC Disposition
DIS Discard Part.
MUI Multiple Usage Item: Return to stock if serviceable.
RWK Rework existing part in accordance with this service bulletin.
RWI Rework existing part per .....
SAL Salvage. Return to operator’s stores for salvage consideration.
PNC Part Number Code
N New part number.
R Part number after rework.
S Superseding or equivalent part number.
X Reworked part and superseding part are functionally and physically
equivalent but not identical.
3. ACCOMPLISHMENT INSTRUCTIONS
If it is not possible to complete all the instructions of this service bulletin because of the
configuration of the aircraft, speak with a representative of Bombardier in the CRC at
1- - -844- - -272- - -2720 (1- - -844- - -CRC- - -CRCO) or email at thd.qseries@aero.bombardier.comfor
analysis and to get an approved disposition to complete this service bulletin.
A . J o b S e t --- U p
NOTE: The steps in the Job Set- - -Up section of this service bulletin are
recommended steps. The steps give a recommendation to get access to
the work area. This recommendation is to give a safe work area and to
minimize possible damage to surrounding aircraft parts. Alternative steps
can be used at the operator discretion.
(1) Placard and select all aircraft electrical power to OFF . Obey all relevant
W A R N I N G S a n d C A U T I O N S ( r e f e r t o A M M T A S K ’ S 2 4 --- 0 0 --- 0 0 --- 8 6 1 --- 8 0 2 a n d
24- - -00- - -00- - -910- - -801).

### Page 11

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 9 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
(2) Make sure that lock pins are installed through each main gear and main gear
door mechanism.
(3) Make sure the nose gear ground lock is engaged.
(4) Set up the work platforms or ladders as required next to the fuselage under the
wing area to gain access to the access panels and inspection area. Make sure
the work platforms or ladders are electrically grounded (refer to Figure 1).
( 5 ) R e f e r t o A M M T A S K 0 6 --- 4 1 --- 0 0 --- 9 9 2 --- 8 0 2 a n d A M M T A S K
06- - -41- - -00- - -992- - -803, open the following access panels:
LOCATION ACCESS PANELS
Left Wing 261CT , 261FT , 262BT , 263AL and
263CL
Right Wing 261LT , 261HT , 262JT , 264AR and
264CR
B. Procedure
NOTE: Make sure the aircraft is in a stable symmetric condition either on jacks or
gear prior to proceeding with the removal of any bolts.
NOTE: DELETED
( 1 ) R e f e r t o A M M T A S K 5 7 --- 1 1 --- 0 1 --- 0 0 0 --- 8 0 1 P a r a . 3 . G . a n d l i f t t h e w e i g h t o f L H S
#1 engine to relieve wing twist when replacing the bolts/barrel nuts at the LHS
attachment points.
CAUTION: ONL Y ONE TENSION BOLT / BARREL NUT IS TO BE REPLACED AT A
TIME. DO NOT LOOSEN OR REPLACE MORE THAN ONE BOLT /
BARREL NUT AT A TIME.
(2) For easy access, remove sixteen Hi- - -Lites B0206004AG5- - -7 from the landing
strap 85713508. Refer to Figure 5.
NOTE: The removal of the landing strap may be necessary to access the tension
bolts/barrel nuts.

### Page 12

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 10 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
(3) Remove the hardware from the inboard or outboard forward tension fittings
(bolt/barrel nut, PLI washer, saddle washer and retainer) at Yw42. Visually
inspect the saddle washer and retainer for signs of damage and corrosion. If any
damage or corrosion is found, replace or contact Bombardier Aerospace
Regional Aircraft T echnical Help Desk for an approved repair. Do not leave any
bolts or nuts out and continue with any other type of work to the aircraft. Discard
existing bolt, PLI washer and barrel nut.
(a) Clean faying sealant from the area (Refer to Figure 3 and 4). Do an eddy
current check on the bore and radius of the fittings and make sure there
are no cracks. Refer to Non Destructive T esting Manual PSM 1- - -84- - -7A
P a r t 6 T A S K 5 1 --- 0 0 --- 0 1 --- 2 5 0 --- 8 0 1 a n d c a l i b r a t e m a c h i n e w i t h f e r r o u s
coupon detailed in paragraph 8.A.(8). If damage or cracks are found,
contact Bombardier Aerospace Regional Aircraft T echnical Help Desk for
an approved repair.
(b) Apply F13 Grade 2 corrosion preventive compound 07- - -01A (or approved
alternate per Consumable Products Manual PSM 1- - -84- - -18) to the shank
of the new bolts. Do not apply compound to threads of the bolts.
(c) Refer to Figure 3 and apply F13 Grade 2 corrosion preventive compound
07- - -01A (or approved alternate per Consumable Products Manual PSM
1- - -84- - -18) to the seating surface of the barrel nut. Do not apply compound
to areas of the barrel nut other than the seating surface.
(d) Refer to Figure 2 and apply fayseal between saddle washer and channel
using sealant 06- - -02 (or approved alternate per Consumable Products
Manual PSM 1- - -84- - -18) as shown.
WARNING: TORQUING BOLT CAN REACH TORQUE VALUES UP TO 4000
FT - - - LBS. TAKE PRECAUTION TO USE APPROPRIATE TOOLING.
(e) Refer to the procedure in AMM Chapter 20- - -10- - -11 and install new bolt,
barrel nut, PLI washer, and the existing, reworked (per approved repair) or
new, saddle washer and retainer.
(4) Repeat step (3) for remaining wing strut on same side.
(5) Secure the landing strap using sixteen new Hi- - -Lites B0206004AG5- - -7
(HST13AG5- - -7) with collars B0206017TP- - -5 or (HST1488TP- - -5) or
(HST1087TF- - -5) . Make sure that hole size meets interference fit. Oversized
Hi- - -Lites B0206004AG6- - -7 (HST13AG6- - -7) may be used as necessary, with
collars B0206017TP- - -6 (HST1488TP- - -6) or (HST1087TF- - -6). Refer to SRM PSM
1 --- 8 4 --- 3 , C h a p t e r 5 1 --- 4 0 --- 1 5 .
( 6 ) R e f e r t o a p p l i c a b l e s t e p s i n A M M T A S K 5 7 --- 1 1 --- 0 1 --- 4 0 0 --- 8 0 1 a n d l o w e r t h e # 1
engine to the nacelle.

### Page 13

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 11 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
( 7 ) R e f e r t o A M M T A S K 5 7 --- 1 1 --- 0 1 --- 0 0 0 --- 8 0 1 P a r a . 3 . G . a n d l i f t t h e w e i g h t o f R H S
#2 engine to relieve wing twist.
(8) Refer to Figure 1 and repeat steps (2), (3), (4) and (5) for inboard and outboard
front spar attachments on opposite side of the wing.
(9) Repeat the check for PLI washer tightness after 24 hours clock time per AMM
TASK 20- - -10- - -11- - -400- - -801.
NOTE: For operators that have not repeated the check PLI washer tightness
check after 24 hours minimum, it is acceptable to check PLI washer
tightness by standard maintenance program (MRB T ask 533004E203
reference only).
(10) Refer to applicable steps in AMM TASK 57- - -11- - -01- - -400- - -801 and lower the #2
engine to the nacelle.
C. Close Out
NOTE: The steps in the Job Close- - -Out section of this service bulletin, except for
the return- - -to- - -service tests, are recommended steps. The steps give a
recommendation to install components removed during the Job Set- - -Up.
This recommendation is to make sure that the aircraft is safe and ready to
return to service. Alternative steps can be used at the operator discretion.
( 1 ) R e f e r t o A M M T A S K 0 6 --- 4 1 --- 0 0 --- 9 9 2 --- 8 0 2 a n d T A S K 0 6 --- 4 1 --- 0 0 --- 9 9 2 --- 8 0 3 a n d
install the following access panels:
LOCATION ACCESS PANELS
Left Wing 261CT , 261FT , 262BT , 263AL and
263CL
Right Wing 261LT , 261HT , 262JT , 264AR and
264CR
(2) Remove all tools and equipment from the work area.
(3) On incorporation of this ModSum, make an entry that conforms to local
regulatory requirements in the applicable logbook(s). Enter component serial
numbers if applicable. Enter this ModSum number only after complete and
functional incorporation of all work defined in this service bulletin.

### Page 14

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 12 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
Area Of Rework
Figure 1
A
B
SEE
FIGURE 2
SEE
FIGURE 2

### Page 15

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 13 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
View On Arrow A (LH Shown) / View On Arrow B (RH Opposite)
Figure 2
CHANNEL FITTING,
INBD
85713159
FRONT SPAR
ASSY
85713500
CHANNEL FITTING,
OUTBD
85713156
STRUT ASSY ,
INBD
85361358
SADDLE WASHER
85713127
SEALANT
PRO- - -SEAL 870C
OR APPROVED ALTERNATE
STRUT ASSY ,
OUTBD
85361359
UNDERWING FAIRING
PANEL WALL
BOL T
B0201089- - -16- - -3
8
QTY: 4
PLI WASHER
B0202042- - -16- - -85.5
QTY: 4
D
BARREL NUT
B0203072- - -16S
QTY: 4
RETAINER
NAS578- - -16A
QTY: 4
SEE
FIGURE 3
Yc
47.500
FAIRING
Yc
42.000
RIB
(DETAIL C)
E
SEE
FIGURE 5
SEE
FIGURE 4

### Page 16

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 14 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
Detail C
Figure 3
STRUT ASSY , OUTBD
85361359
STRUT ASSY , INBD
85361358
RETAINER
NAS578- - -16A
REF
BARREL NUT
B0203072- - -165
QTY: 4
EXTENT OF BARREL NUT
SEATING SURFACE

### Page 17

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 15 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
View On Arrow D
Figure 4
CHANNEL FITTING,
OUTBD
85713156
(REFERENCE)
AREA TO BE CLEANED OF
FAYSEAL
BORE, PAD AND RADIUS
TO BE INSPECTED FOR
ANY DAMAGE (CRACKS)
PRIOR TO INSTALLATION
OF NEW HARDWARE.

### Page 18

S E R V I C E B U L L E T I N 8 4 --- 5 7 --- 2 6
S . B . 8 4 --- 5 7 --- 2 6
Page 16 of 16
21 Mar 2013
PM
Revision ‘C’ 16 Jul 2018
View On Arrow E - - - Removal of the Landing Strap
Figure 5
1
H I --- L I T E S ( 1 6 )
LANDING STRAP 85713508- - -103
LANDING STRAP 85713508- - -104
12

### Page 19

May2018
SERVICE BULLETIN (SB) - - - RECORD OF INCORPORATION
- - - Q SERIES DASH 8 AIRCRAFT
To : CMDB Focal
Facsimile: (1) 416 375 4538
E- -mai l: cmdb.requests@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
The data that you provide below will help us record the incorporation of this ModSum
and the aircraft effectivity in the maintenance manual.
Operator: Service Bulletin: __________________ Revision: _________
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Aircraft Serial Number: Model Number: Date Bulletin Completed:
Fax this sheet to (1) 416 375 4538 or Email PDF to:
cmdb.requests@aero.bombardier.com

### Page 20

May 2018
SERVICE BULLETIN (SB) - - - COMMENT SHEET - - - Q SERIES DASH 8 AIRCRAFT
To : SB Focal (T oronto), Bombardier Aerospace Commercial Aircraft
Phone: (1) 416 375 4078 Facsimile: (1) 416 375 4538
E- -mai l: syed.rizvi@aero.bombardier .com
From:
Company:
Phone: Extn:
Facsimile: Date:
E- -mai l:
Select appropriate box(es) and add comments or suggestions you would like us to know
that may enhance the quality of our service bulletins.
Service Bulletin: Revision: ModSum:
1. PLANNING INFORMATION
V Effectivity V Reason V Description V Compliance
V Approval V Manpower V Material V Weight and Balance
V Electrical Load V T ooling V References V Publications Affected
2. MATERIAL INFORMATION
V Kit Content V Special T ools/Equipment V Parts to Modify Spares
V Consumables V Disposition of Existing Parts V Other
3. ACCOMPLISHMENT INSTRUCTIONS
V J o b S e t --- U p V Procedure V Close- - -Out V Te s t
V Illustration(s) V Other
4. COMMENTS, REMARKS, SUGGESTIONS
Fax this sheet to (1) 416 375 4538 or Email PDF to:
syed.rizvi@aero.bombardier.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
