# CASA Service Bulletin AOT-C295-55-0008

Copy: Revision 2 ("AOT-C295-55-0008-R2"), 10 pages: PDF https://openairdocs.org/files/sha256/15/eb/15ebd3b09e63220cbdf8ee4b88551adf3372f90ae01cfc80912dcad2566f3d10; text https://openairdocs.org/service-documents/casa/aot-c295-55-0008/file/15ebd3b09e63.md. Rights: © CASA. Filed by the FAA in regulations.gov docket FAA-2024-2134, the docket of AD 2024-24-04. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [CASA](https://openairdocs.org/service-documents/casa.md)
- Type: Service bulletin (Service Bulletin)
- Number: AOT-C295-55-0008
- Latest revision known: AOT-C295-55-0008, Revision 2 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/casa/aot-c295-55-0008

## Text (10 pages)

Rights: © CASA. Filed by the FAA in regulations.gov docket FAA-2024-2134, the docket of AD 2024-24-04. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Ref No.:  AOT - C295 - 55 - 0008  
Rev No.:  2  Rev Date:  2 9 /0 9 /2023  
 
SERVICES DIRECTORATE  
Pº John Lennon s/n  
28906 Getafe, Madrid, SPAIN  
mta.technicalservice@es.airbus.com  
 
Alert Operators Transmission  
 Page :  1 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  
 
C - 29 5 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
Aircraft Type:  C - 295    
Applicability:  ALL  
Referenced Documents:  
Ref.1 ANDT 51 - 01 - 08 (last published issue).  
Ref.2 AM 06 - 41 - 55 (last published issue).  
Ref.3 SIL - C295 - 51 - 0001 (last published issue).  
Ref.4 ANDT 51 - 99 - 00  (last published issue) .  
Ref.5 AOT - C295 - 55 - 0008 - I00 .  
Ref.6 AOT - C295 - 55 - 0005 - I01 .  
Ref.7 AOT - C295 - 55 - 0008 - I01.  
Ref. 8  ACC 51 - 71 - 1 0  (last published issue).  
Ref. 9  AM 20 - 50 - 00  (last published issue).  
Ref. 10  ACC 51 - 7 1 - 30  (last published issue).  
Ref.1 1  AM 55 - 11 - 11  (last published issue).  
  
NOTE: This AOT is considered by Airbus DS as a Mandatory Action  
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document sha ll not be reproduced or disclosed to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document a nd its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
This Information is of origin Airbus DS  / Spain  and does not contain any export controlled Information  
 
1.  REASON FOR REVISION  
Rev.0 0 : This is the first issue of the AOT .  
Rev. 0 1: Revision  01 is released due to the following:  
  AOT - C295 - 55 - 0008 - I01 supersedes visual AOT - C295 - 55 - 0005 - I01 . A grace period is included 
for A/C which have already performed visual AOT - C295 - 55 - 0005 - I01  and AOT - C295 - 55 - 0008 - 
I00.  
  Threshold and Intervals updated.  
  Inspection of possible reworks in radii included .  
  Effectivity to all MSN extended.  
Rev. 02: Revision 02 is released due to the following:  
  Removing/Installation of LH and RH Stabilizers for performing properly the inspections  (only the 
first inspection acc ording to AOT - C295 - 55 - 0008 - I02).

### Page 2

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  2 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
  Removal/Restoring the surface protection for performing properly the inspections  (only the first 
inspection according to AOT - C295 - 55 - 0008 - I02).  
  Inspection Man Hours updated.  
  Threshold and intervals updated taking into account the effect of armouring  provisions .  
2.  REASON  
2.1  FACTS  
One CN - 235 Operator recently reported a crack on the Horizontal Stabilizer to Fuselage Rear 
Attachment Fitting (Horizontal Stabilizer side) P/N: 35 - 31212 - 1601 of one aircraft.  
The crack is located on the upper corner of the Rear Attachment Fitting Lug, LH side of the aircraft. For 
more details of the affected area, see Figure 1  in Annex  1.  
 
Due to the similar design concept in this area b etween the CN - 235 and the C - 295, the C - 295  aircraft 
could be  affected.  
2.2  CONSEQUENCES  
The C - 295  Horizontal Tail Plane (HTP) structure is attached to the Rear Fuse lage by means of 
machined Attachment Fitting (forward and rear).  
 
This crack may degrade the structural integrity of the LH and RH Rear Attachment Fitting and could 
cause the rupture of the lugs of these fittings.  
 
2.3  AIM  
The aim of this communication is to inform about this issue and to verify the integrity of the  LH and RH  
Rear Attachment Fittings by means of repetitive HFEC inspections as per Ref.1 of the  Horizontal 
Stabilizer to Fuselage Rear Attachment Fitting Upper and Lower lugs.  
 
2.4  INVESTIGATION (IF AP P LICABLE)  
The result of the preliminary investigation performed by Airbus Defence and Spa ce has shown that all 
the C - 295  aircraft have to be inspected to ensure that potential cracks are detected.  
3.  SHORT TERM ACTION  
3.1  PLANNING AND MANPOWE R  
3.1.1  ACCOMPLISHMENT T IMESCALE  
The repetitive  inspection described in paragraph 3.2.2 has to be performed in all aircraft included in the 
applicability .

### Page 3

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  3 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
 
 
For aircrafts except for versions listed  in paragraphs below :  
  From A/C first flight the first  inspection is set at 45 00FC  or 45 00FH (whichever occurs first) and will 
be performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .   
If A/C has exceeded 45 00FC or 45 00FH (whichever occurs first)  from first flight,  the grace period for 
performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs first) from AOT - C295 - 
55 - 0008 - I0 2  release date .  
Interval of repetitive HFEC  inspection: 13 00 FC or 13 00FH (whichever occurs first).  
  If A/C has already performed AOT - C295 - 55 - 0005 - I01  ( valid from MSN 0 01 to 148, both included) , 
the next inspection is set at next A - check or 1300FC or 13 00FH (whichever occurs first) and will be 
performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has exceeded  or 1300FC or 13 00FH from AOT - C295 - 55 - 0005 - I01  (valid from MSN 001 to 
148, bo th included) , the grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH 
(whichever occurs first) from AOT - C295 - 55 - 0008 - I0 1  release date.  
Interval of repetitive HFEC  inspection: 1300FC or 13 00FH (whichever occurs first).  
  If A/C has already performed AOT - C295 - 55 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , the next 
inspection is set at next 13 00FC or 13 00FH (whichever occurs first) and will be performed with 
HFEC as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has  exceed ed  1300FC or 13 00FH from A OT - C295 - 55 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , 
the grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs 
first) from AOT - C295 - 55 - 0008 - I0 1  release date.  
Interval of repetitive HFEC  inspection: 1300FC or 13 00FH (whichever occurs first).  
 
For aircrafts equipped with armouring provisions  ( FI02, RJ01, PO02, EA03, CL03, CL05, RC01 
and PO04) :  
  From A/C first flight the first  inspection is set at 1650 FC  or 1650 FH (whichever occurs first) and will 
be performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .   
If A/C has exceeded 1650 FC or 1650 FH (whichever occurs first) from first flight, the grace period for 
performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs first) from AOT - C295 - 
55 - 0008 - I0 2  release date .  
Interval of repetitive HFEC  inspection: 65 0 FC or 65 0FH (whichever occurs first).  
  If A/C has already performed AOT - C295 - 55 - 0005 - I01 (valid from MSN 001 to 148, both included) , 
the next inspection is set at next A - check or 650 FC or 650 FH (whichever occurs first) and wil l be 
performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has exceeded or 650 FC or 650 FH from AOT - C295 - 55 - 0005 - I01 (valid from MSN 001 to 148, 
both included) , the grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH 
(whichever occurs fir st) from AOT - C295 - 55 - 0008 - I0 2  release date.

### Page 4

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  4 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
Interval of repetitive HFEC  inspection: 650 FC or 650 FH (whichever occurs first).  
  If A/C has already performed AOT - C295 - 55 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , the next 
inspection is set at next 65 0FC or 65 0FH (whichever occurs first) and will be performed with HFEC 
as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has  exceeded 650 FC or 65 0FH from AOT - C295 - 55 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , the 
grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs first) 
from AOT - C295 - 55 - 0008 - I0 2  release date.  
Interval of repetitive HFEC  inspection: 650 FC or 650 FH (whichever occurs first).  
 
For specific aircrafts PG 01/PG02/PG03 equipped with armouring provisions :  
 
  From A/C first flight the first  inspection is set at 3000 FC  or 3000 FH (whichever occurs first) and will 
be performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .   
If A/C has exceeded 3000FC or 3000FH (whichever occurs first) from first flight, the grace period for 
performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs first) from AOT - C295 - 
55 - 0008 - I0 2  release date .  
Interval of repetitive HFEC  inspection: 1300FC or 130 0FH (whichever occurs first).  
  If A/C has already performed AOT - C295 - 55 - 0005 - I01 (valid from MSN 001 t o 148, both included) , 
the next inspection is set at next A - check or 1300FC or 1300 FH (whichever occurs first) and will be 
performed with HFEC as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has exceeded or 1300 F C or 1300 FH from AOT - C295 - 55 - 0005 - I01 (valid from MSN 00 1 to 
148, both included) , the grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH 
(whichever occurs first) from AOT - C295 - 55 - 0008 - I0 1  release date.  
Interval of repetitive HFEC  inspection: 1300FC or 1300 FH (whichever occurs first).  
  If A/C ha s already performed AOT - C295 - 55 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , the next 
inspection is set at next 1300 FC or 1300 FH (whichever occurs first) and will be performed with 
HFEC as per AOT - C295 - 55 - 0008 - I0 2 .  
If A/C has  exceeded 1300FC or 1300 FH from AOT - C295 - 5 5 - 0008 - I00  or AOT - C295 - 55 - 0008 - I0 1 , 
the grace period for performing the AOT - C295 - 55 - 0008 - I0 2  is 50FC or 50FH (whichever occurs 
first) from AOT - C295 - 55 - 0008 - I0 1  release date.  
Interval of repetitive HFEC  inspection: 1300FC or 1300 FH (whichever occurs first).  
3.1.2  MANPOWER  
The estimated time to get access and perform the inspection is 15  man hours per  aircraft  (only the first 
inspection according to AOT - C295 - 55 - 0008 - I0 2 ).  
 
The estimated time to get access and perform the inspection is 8  man hours per  aircraft  (for repetitive 
inspections according to AOT - C295 - 55 - 0008 - I0 2 ) .

### Page 5

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  5 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
3.2  DESCRIPTION  
3.2.1  ACCESS  
The area to be inspected is accessible through removing /installing  as per Ref.2  Tail Section Access 
Panels 332AB, 342AB, 332AT and 342AT .  
 
A lso removing/installing the LH and RH Horizontal Stabilizers as per Ref.1 1  (only the first inspection 
according to AOT - C295 - 55 - 0008 - I0 2 ).  
3.2.2  INSPECTION REQUIREME NTS  
  Remove surface protections as per Ref. 8  on radi i  and flange ( see Figure 5  for  area to remove 
surface protections)  in order to determine if reworks found on flange and radii area and if the radii 
dimension is R=4mm or has a sharp corner  ( only the first inspection ac cording to AOT - C295 - 55 - 
0008 - I0 2 ).  
 
  Perform HFEC inspection as per Ref.1 of the Horizontal Stabilizer to Fuselage Rear Attachment 
Fitting Upper and Lower lugs, LH and RH side of the aircraft (FWD and AFT sides), paying special 
attention to possible cracks (see Figure 2  and Figure 3  in Annex 1). In addition, the HFEC inspection 
as per Re f.1 has to be performed in the area marked in grey, including the lug radius and flange 
area (see Figure 4  in Annex 1) ensuring crack - free condition.  
 
  P erform DVI at radii as per Ref.4 on Horizontal Stabilizer to Fuselage Rear Attachment Fitting 
Upper and Lower lugs, LH and RH side of the aircraft (FWD and AFT sides), paying special 
attention to possible reworks on radii and flange area and if the radii  dimension is R=4mm or has a 
sharp corner ( see Figure 5  of Annex 1 as example) , ( only the first inspection according to AOT - 
C295 - 55 - 0008 - I0 2 )  
 
  Finally,  restore surface protections on the area as per Ref. 9  and Ref. 10  with the following painting 
scheme: Alodine 1200 (Z23.401) + two layers epoxy primer (Z12.113, 15 - 20µm each layer) + one 
layer polyurethane (Z12.380, 40 - 50µm) . ( Only the first inspection according to AOT - C295 - 55 - 0008 - 
I0 2 )  
 
3.2.3  FINDINGS  
- In case of cracks are identified, before next flight ,  contact Airbus Defence and Space with a detailed 
Damage Report as per Ref.3 to get further instructions  and is totally forbidden to perform a blend - 
out or any action on the fitting, due to Airbus Defence and Space is performing an investigation 
about the origin of these damages.  Report back FC, FH, S/N and P/N of Horizontal Stabilizer, if there 
are reworks or not, the radii status and the A/C MSN.  
 
- In case of no crack but reworks or sharp corner radii are detected, report back to Airbus Defence and 
Space as per Ref.3 as information to get further instructions  and is totally forbidden to perform a 
blend - out or any action on the fitting, due to Airbus Defence and Space is performing an

### Page 6

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  6 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
investigation about the origin of these damages.  Report back rework dimensions , radii 
measurement, FC, FH, , S/N and P/N of Horizontal Stabilizer and the A/C MSN .  
 
- In case no cracks nor reworks nor sharp corner radii are detected also report back to Airbus Defence 
and Space as per Ref.3 as information.  
 
3.3  SPARES AND TOOLING  
No special tooling is needed .  
 
4.  FURTHER INFORMATION  
 
4.1  FOLLOW - UP PLAN  
Further actions may be consi dered based upon results of the ongoing investigation ,  
4.2  IMPACTED DOCUMENTATI ON  
Repetitive inspection or an update on the schedule maintenance manual will be analyzed based on the  
inspections results .  
4.3  TERMINATING ACTION  
Terminating action of this AOT will be defined based on the inspection results .  
 
5.  REPORTING  
Questions about this AOT and inspection results with or without findings  (See 3.2.3)  are to be sent to :  
 
Airbus DS  Technical Assistance Center (AMTAC):  
Telephone: (+34) 91 600 79 99  
E - mail:   mta.techni calservice@es.airbus.com  
 
This AOT is or it is expected to be subject to an Airworthiness Directive or Airworthiness Directive 
Recommendation Letter.

### Page 7

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  7 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
 
 
ANNEX 1 –  FIGURES  
 
Figure 1 . Horizontal Stabilizer to Fuselage Rear Attachment Fitting Location

### Page 8

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  8 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
Figure 2 . Rear Attachment Fitting lugs –  Cracks Location  
 
Figure 3 . Example of cracks

### Page 9

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  9 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
Figure 4 . Inspection area

### Page 10

Reference No.:  AOT - C295 - 55 - 0008  
Revision No.:  2  Date:  2 9 /0 9 /2023  
Alert Operators Transmission  
 Page :  10 / 10  
 ATA Chapter:  55 - 00 - 00  
Subject:  C - 295 -  ATA55 -  Aft Fittings Of Horizontal Stabilizer Inspection  
 
© AIRBUS DEFENCE AND SPACE. All rights reserved. Confidential and proprietary document.  
This document and all information contained herein is the sole property of AIRBUS DEFENCE AND SPACE.  
No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed  to a third party 
without the express written consent of AIRBUS DEFENCE AND SPACE.  
This document and its content shall not be used for any purpose other than that for which it is supplied.  
© AIRBUS DEFENCE AND SPACE  2023  All right reserved  
 
 
Figure 5 . Example of reworks  and painting removal area  (this example is very severe, the rework could be smaller)  
 
Released by  
 
Raul - Angel Garcia - 
Alvarez  
Electronically Validated  
HO TASST1    
“ The technical content of this document is approved under the authority of MDOA  ref ES.PERAM21J/7001/20 . ”  
“ The technical content of this document is approved under the authority of Design Organization Approval AESA.21JA.001 ”  
"The technical content of this document is approved under the authority of DOA ref. EASA. 21J.032"  
“ The technical content of this document is generated and validated under the Airbus DS Design Assurance System, based upon 
accepted procedures under DOA ref EASA.21J.032 ”

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
