# Centrair Mandatory Service Bulletin 101-06: Revision 1

- Rights: © Centrair. Filed by the FAA in regulations.gov docket FAA-2014-0018; AD 2014-07-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Centrair Mandatory Service Bulletin 101-06](https://openairdocs.org/service-documents/centrair/sb-101-06.md)
- Title as filed: U.S. DOT/FAA - Service Bulletin No. 101 06, Revision 1
- Pages: 4
- PDF: https://openairdocs.org/files/sha256/a4/c7/a4c75c3ba919f40250842dbd7b2b3972654a08d057766836cd877fe0b09619e0
- Page: https://openairdocs.org/service-documents/centrair/sb-101-06/file/a4c75c3ba919

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

SERVICE BULLETIN
No. 101-06 rev.1
SN CENTRAIR 101 GLIDERS
Société Nouvelle Centrair  all "Pegasus" types  Page 1/4
Ce document est la propriété de S.N. CENTRAIR et ne peut être reproduit ou communiqué sans son autorisation  SUBJECT:  CHECK OF THE BONDING AND CONDITION OF THE FUSELAGE
FRAMES
VALIDITY:  SN CENTRAIR 101 all types, all serial numbers
PURPOSE:  To ensure the integrity of the fuselage frames, particularly following
incidents such as landing with wheels up, ground loops, or hard
landings, etc.
Rev. 1: Following evidence that the inspections called up by this
Service Bulletin have not always been conducted correctly (problem
encountered with the bonding of internal renforcements and with the
integrity of the winch hook frame), this revision 1 reinforces the
structural inspections.
APPLICATION: Within 15 days of the date of issue of revision 1 of this Service Bulletin
Rev. 1  Following the initial application of this Service Bulletin, the inspections
defined in the "Description" paragraph below must be repeated
systematically in the following cases:
Landing with the wheels up or during which the gear was retracted
Ground loop during take-off or landing
Definite hard landing, or following which visible damage is
observed on the underside of the fuselage (deep cracks or flaking
of the gel-coat for example).
DESCRIPTION:
In order to avoid any incident due to debonding or failure of fuselage reinforcement
frames, it is mandatory to undertake the inspections described hereafter in order to
Rev. 1  check:  The condition of the bonding
• The condition of the frames and renforcements
The inspections called up are visual, and are achievable after removing the seat, on all
the frames as well as on the internal renforcements (condition of the frames and
appearance of the bonding).
CENT63-1b  Translation of 'BULLETIN DE SERVICE: In case of any difficulty, reference should be made to the French original issue
Société Nouvelle CENTRAIR  Initial issue dated 04/02/1985  Classification
Aérodrome - 36300 LE BLANC  Mandatory
FRANCE  Revision 1 dated 05/08/2013  Recommended
Tél. : 02.54.37.07.96 - Fax : 02.54.37.48.64  For information

### Page 2 (OCR)

SERVICE BULLETIN
Société Nouvelle Centrair  No. 101-06 rev.1  Page 2/4
Ce document est la propriété de S.N. CENTRAIR et ne peut être reproduit ou communiqué sans son autorisation  In the event of a wheels-up landing, the items most exposed are the internal reinforcements and the
internal frames in the cockpit in addition to the external skin of the fuselage.
It is therefore essential to pay particular attention to those items. Look in particular for debonding of the
internal renforcements to the fuselage skin and check the condition of the bonding beads of the frames
and the condition of the frames themselves (free of cracks, no crushing of the plywood in the vicinity of
the attachment screws etc.)
These inspections do not diminish the need for an overall examination of the glider in the event of an
incident such as described above.
For gliders which use the winch hook, particular attention must be paid to the forward frame
supporting the winching hook, which is highly loaded, and for which the forward hook fitting must be
removed to enable proper analysis of its condition (cf. photo on page 4).
The frames and internal reinforcements are accessible after removal of the seat, which is
attached by screws around its periphery:
Rev. 1
Seat shell
CENT63-1b
Société Nouvelle CENTRAIR  Classification
Initial issue dated 04/02/1985
Aérodrome - 36300 LE BLANC  Mandatory
FRANCE  Revision 1 dated 05/08/2013  Recommended
Tél. : 02.54.37.07.96 - Fax : 02.54.37.48.64  For information

### Page 3 (OCR)

BULLETIN DE SERVICE
Société Nouvelle Centrair  No. 101-06 rev.1  Page 3/4
The reinforcements correspond to the items in the sketch below. They are bonded around
their periphery to the skin forming the shell of the fuselage.
Bonding zones to be carefully inspected
Right side reinforcement  Left side reinforcement
Detail of the 6 frames to be inspected in the cockpit in addition to the main landing
gear support frame
Forward hook support frames
Stick support frames
Winch hook support frames
Front of the
fuselage,
Note: The shape of the various
frames may be slightly different
from that shown in the diagram
opposite due to the different
versions of the "Pegasus" glider  Rear of the
fuselage
Société Nouvelle CENTRAIR  Initial issue dated 04/02/1985  Classification
Aérodrome - 36300 LE BLANC  Mandatory
FRANCE  Revision 1 dated 05/08/2013  Recommended
Tél. : 02.54.37.07.96 - Fax : 02.54.37.48.64  For information

### Page 4 (OCR)

BULLETIN DE SERVICE
Société Nouvelle Centrair  No. 101-06 rev.1  Page 4/4
For gliders using the winch hook, careful attention must be paid to the zone of the forward hook
support frame as shown in the photograph below looking in particular for any cracks on the centre-line of
the frame in the zone corresponding to the hook fitting (inspection after removal of the winch hook
attachment fitting on the forward frame)
Forward winch hook frame
Hook forward fitting
Bonding of the forward hook frame to the
internal reinforcement
Internal reinforcements, bonding zones
to the fuselage skin (if necessary, move
any pneumatic hoses and electric cables
to provide unrestricted access to the
bonding zones).
If any damage or anomaly is found, forward a report of your findings to SN
CENTRAIR and perform the mandatory and approved repairs before the
next flight.
Société Nouvelle CENTRAIR  Initial issue dated 04/02/1985  Classification
Aérodrome - 36300 LE BLANC  Mandatory
FRANCE  Revision 1 dated 05/08/2013  Recommended
Tél. : 02.54.37.07.96 - Fax : 02.54.37.48.64  For information

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
