# CFM International Service Bulletin 56-5B 73-0122: Revision 8

- Rights: © CFM International. Filed by the FAA in regulations.gov docket FAA-2012-1114, the docket of AD 2013-14-06. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [CFM International Service Bulletin 56-5B 73-0122](https://openairdocs.org/service-documents/cfm/56-5b-73-0122.md)
- Title as filed: U.S. DOT/FAA - CFM 56-5B SB 73-0122R8
- Pages: 5
- PDF: https://openairdocs.org/files/sha256/1e/dc/1edca6d7cbfd74b79d91fa878bb88d75637412cf5ae6cd6b70416990eb2a58c3
- Page: https://openairdocs.org/service-documents/cfm/56-5b-73-0122/file/1edca6d7cbfd

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ENGINE FUEL AND CONTROL (73-00-00) - Use of CIS Fuels in CFM56-5B Engines
CFM PROPRIETARY INFORMATION
The information contained in this document is CFM p roprietary information and is disclosed in
conﬁdence. It is the property of CFM and shall not be used, disclosed to others or reproduced
without the express written consent of CFM, including, but without limitation, it is not to be used
in the creation, manufacture, development, or derivation of any repairs, modi ﬁcations, spare
parts, design, or con ﬁguration changes or to obtain FAA or any other government or regulatory
approval to do so. If consent is given for reproduction in whole or in part, this notice and the
notice set forth on each page of this document shall appear in any such reproduction in whole
or in part. The information contained in this document may also be controlled by U.S. export
control laws. Unauthorized export or re-export is prohibited.
All technical documentation and information c ontained herein, with respect to assembly and
disassembly, cleaning, inspection methods and limits, repair methods and limits, operational
limits, life limits and the like, have been developed and approved for use with engines and
parts that have been manufactured and/or approved by CFM and that have been maintained in
accordance with CFM technical documentation and recommendations. CFM has no contractual
or legal obligation for, nor knowledge of, non-CF M-approved parts and repairs. Accordingly, this
document is not intended to apply to non-CFM-approved parts and repairs.
November 19, 2003 CFM56-5B S/B 73-0122
Revision 08, March 08, 2012 PAGE 1 of 5

### Page 2

ENGINE FUEL AND CONTROL (73-00-00) - Use of CIS Fuels in CFM56-5B Engines
TRANSMITTAL INFORMATION
REVISION 8 TO SERVICE BULLETIN 73-0122
Revision 8 is issued to update paragraphs 1., P LANNING INFORMATION and 3.,
ACCOMPLISHMENT INSTRUCTIONS.
Revision 7 was issued August 18, 2011. Revision 6 was issued April 23, 2009. Revision 5 was
issued August 22, 2007. Revision 4 was issued May 07, 2007. Revision 3 was issued July 20,
2006. Revision 2 was issued January 30, 2006. Revision 1 was issued November 30, 2004. The
original was issued November 19, 2003. Revision bars in the left margin identify changes.
1. PLANNING INFORMATION
A. Effectivity and Description
CFM56-5B1, -5B2, -5B4, -5B5, -5B6, -5B7, -5B1/P , -5B1/2P , -5B1/3, -5B2/P ,
-5B2/2P , -5B2/3, -5B3/P , -5B3/2P , -5B3/3, -5B3/3B1, -5B4/P , -5B4/2P , -5B4/3,
-5B4/3B1, -5B5/P , -5B5/3, -5B6/P , -5B6/2P , -5B6/3, -5B7/P , -5B7/3, -5B8/P , -5B8/3,
-5B9/P , -5B9/3
(1) All CFM56-5B series engines with commo nwealth of independent states (CIS)
fuels or fuel additives which are uploaded 50 percent to 100 percent of the
time based on any 1 year average, since last hydromechanical unit (HMU)
shop visit, are affected by this Service Bulletin.
(2) This Service Bulletin de ﬁnes the CIS fuels and fuel additives that are fully
approved for use in the CFM56-5B series engines. It also de ﬁnes the
requirements for other fuels and fuel additives that are acceptable for use
provided that engine component inspections/cleaning are performed. Refer to
T able 1 for a listing of CIS fuel types and additives along with any associated
requirements.
TABLE 1
Fuel Type Speciﬁcation Special Requirements
RT GOST 10227 Fully Approved
RT GSTU 320.00149943.007 Fully Approved
TS-1 GOST 10227 Refer to paragraph
3., Accomplishment
Instructions.
TS-1 GSTU 320.00149943.011 Refer to paragraph
3., Accomplishment
Instructions.
November 19, 2003 CFM56-5B S/B 73-0122
Revision 08, March 08, 2012 PAGE 2
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 3

ENGINE FUEL AND CONTROL (73-00-00) - Use of CIS Fuels in CFM56-5B Engines
Fuel Additive Speciﬁcation Special Requirements
Liquid I (refer to Note 1)
(equivalent to EGME)
(anti-ice additive)
GOST 8313 Fully Approved
SIGBOL (refer to Note 2)
(anti-static additive)
TU38.101741 Fully Approved
NOTE 1: The maximum concentration must not exceed 0.15 percent by volume.
NOTE 2: The maximum concentration must not exceed 0.0005 percent by
volume.
(3) This Service Bulletin may be revised or canceled pending the results of fuel
speciﬁcation equivalency testing.
B. Compliance
Category 2
CFM recommends you do the required inspections as soon as possible,
without effect on revenue service, per the requirements in ACCOMPLISHMENT
INSTRUCTIONS.
There are no concurrent requirements.
C. Reason
(1) Objective:
Deﬁne the requirements for use of CIS fuels and CIS fuel additives that
may not currently meet GE Aviation fuel speci ﬁcation D50TF2 as shown in
paragraph 1.A.(2), T able 1 above.
(2) Condition:
Certain CIS fuels do not currently meet the GE Aviation fuel speci ﬁcations due
to differences in thermal stability testing methods de ﬁned in the respective
speciﬁcations.
(3) Cause:
None.
(4) Improvement:
This Service Bulletin de ﬁnes which CIS fuels and fuel additives are fully
approved or approved with limitations for use in the CFM56-5B series engines.
November 19, 2003 CFM56-5B S/B 73-0122
Revision 08, March 08, 2012 PAGE 3
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 4

ENGINE FUEL AND CONTROL (73-00-00) - Use of CIS Fuels in CFM56-5B Engines
(5) Substantiation:
Use of these fuels and additives is substantiated by the combination of
requirements de ﬁned in this document as well as successful operational
experience.
D. Approval
The technical content of this Service Bulletin is approved by the FAA and under the
Authority of DOA No. EASA.21J.086.
E. Manpower
No additional man-hours are necessary to do this Service Bulletin.
F. Weight and Balance
Weight and balance are not changed.
G. References
CFM56 Component Maintenance Manual (CMM) (73-11-42) CFMI-TM.CM.64
CFM56 Component Maintenance Manual (CMM) (73-11-43) CFMI-TM.CM.119
CFM56 Component Maintenance Manual (CMM) (73-11-44) CFMI-TM.CM.343
CFM56 Component Maintenance Manual (CMM) (73-21-18) CFMI-TM.CM.190
CFM56 Component Maintenance Manual (CMM) (73-21-78) CFMI-TM.CM.414
H. Publications Affected
None.
I. Interchangeability
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
None.
B. Industry Support Information
None.
November 19, 2003 CFM56-5B S/B 73-0122
Revision 08, March 08, 2012 PAGE 4
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 5

ENGINE FUEL AND CONTROL (73-00-00) - Use of CIS Fuels in CFM56-5B Engines
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
This section de ﬁnes the necessary checks for engines that operate on TS-1 fuels
more than 50 percent of the time as de ﬁned in paragraph 1.A.(1)., E ffectivity and
Description. These requirements can be satis ﬁed as follows:
(1) At each engine shop visit, do a ﬂow check of all fuel nozzles. Refer to the
CFM56 CMM, 73-11-42, 73-11-43, or 73-11-44.
(2) At each engine shop visit or every 10,000 ﬂight hours, whichever comes
ﬁrst, clean and inspect HMU as directed below. Refer to the CFM56 CMM,
73-21-18 or 73-21-78.
(a) Fully disassemble the HMU. Refer to the relevant CMM.
(b) Clean the hardware. Refer to the relevant CMM.
(c) Do an inspection of all other parts, check ﬁts and clearances sections
after cleaning. Refer to the relevant CMM.
(d) Repair, re-assemble, calibrate, and ﬁnal test the HMU. Refer to the
relevant CMM.
(3) At 3,000 ﬂight hour intervals, do a general visual inspection (GVI) of all fuel
system components for leaks. Repair all leaks as required.
B. Contact CFM if any item fails an inspection or check.
November 19, 2003 CFM56-5B S/B 73-0122
Revision 08, March 08, 2012 PAGE 5
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
