# CFM International Service Bulletin CFM56-5B 72-1074: Revision 01

- Rights: © CFM International. Filed by the FAA in regulations.gov docket FAA-2019-0212, the docket of AD 2019-12-05. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [CFM International Service Bulletin CFM56-5B 72-1074](https://openairdocs.org/service-documents/cfm/cfm56-5b-72-1074.md)
- Title as filed: CFM56-5B SB 72-1074-R01
- Pages: 7
- PDF: https://openairdocs.org/files/sha256/ed/b0/edb083a7ee43380ada243eb9b3272041cdb2b799830772df49de911a41ce899a
- Page: https://openairdocs.org/service-documents/cfm/cfm56-5b-72-1074/file/edb083a7ee43

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
CFM PROPRIETARY INFORMATION
The information contained in this document is CFM proprietary information and is disclosed in con ﬁ-
dence. It is the property of CFM and shall not be used, disclosed to others or reproduced without the
express written consent of CFM, including, but wit hout limitation, it is not to be used in the creation,
manufacture, development, or derivation of any repairs, modi ﬁcations, spare parts, design, or con ﬁg-
uration changes or to obtain FAA or any other government or regulatory approval to do so. If consent
is given for reproduction in whole or in part, this notice and the notice set forth on each page of this
document shall appear in any such reproduction in w hole or in part. The information contained in
this document may also be controlled by U.S. export control laws. Unauthorized export or re-export
is prohibited.
All technical documentation and information contained herein, with respect to assembly and disas-
sembly, cleaning, inspection methods and limits, r epair methods and limits, operational limits, life
limits and the like, have been developed and approved for use with engines and parts that have been
manufactured and/or approved by CFM and that have been maintained in accordance with CFM
technical documentation and recommendations. CFM has no contractual or legal obligation for, nor
knowledge of, non-CFM-approved parts and repairs . Accordingly, this document is not intended to
apply to non-CFM-approved parts and repairs.
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 1 of 7

### Page 2

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
TRANSMITTAL INFORMATION
REVISION 1 TO SERVICE BULLETIN 72-1074
Revision 1 is issued to update the Service Bulletin title and paragraphs 1., P LANNING
INFORMATION,2 . ,M ATERIAL INFORMATION, and 3., A CCOMPLISHMENT INSTRUCTIONS.
The original was issued July 27, 2018. Revision bars in the left margin identify changes.
1. PLANNING INFORMATION
A. Effectivity
CFM56-5B1, -5B2, -5B4, -5B5, -5B6, -5B7
CFM56-5B1/P , -5B2/P , -5B3/P , -5B4/P , -5B5/P , -5B6/P , -5B7/P , -5B8/P , -5B9/P
CFM56-5B3/P1, -5B4/P1
CFM56-5B1/2P , -5B2/2P , -5B3/2P , -5B4/2P , -5B6/2P , -5B9/2P
CFM56-5B3/2P1, -5B4/2P1
The rotating air high pressure turbine (HPT) front seals (seals) P/N 1795M36P01
and P/N 1795M36P02 that have the following serial numbers: GWNDN949 through
GWNSE969, and GWN000CE through GWN0990L (except serial numbers:
GWN08ND7, GWN0923A, GWN0971E, GWN098A1, GWN098W6, GWN098W8,
GWN098WA, and GWN0990G), and that have been removed from their original
HPT disk in the ﬁeld and re-assembled to a second HPT disk with a different serial
number, are affected by this Service Bulletin.
B. Description
This Service Bulletin provides the removal timing for the seals P/N 1795M36P01
and P/N 1795M36P02 with the serial numbers listed in paragraph 1.A., E ffectivity.
Refer to Figure 1.
C. Compliance
Category 2
CFM recommends that you do this Service Bulletin before 6,500 cycles since
a s s e m b l e dt oas e c o n dH P Td i s k ,i ft h es e a lw a sr e - a s s e m b l e dt oas e c o n dH P T
disk with a different serial number. If t he condition has exceeded the 6,500 cycles
since assembled to the second HPT disk, then replace the seal before 500 cycles or
within three months from the original issue date, whichever comes sooner.
NOTE 1: For the seal P/N 1795M36P01, if the condition has exceeded the 6,500
cycles since assembled to a second HPT disk, replace the seal before 250
cycles or within three months from the revision 1 issue date, whichever
comes sooner.
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 2
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 3

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
NOTE 2: For the seals that have exceeded the 6,500-cycle threshold, the removals
should be prioritized based on the cycles since the installation to the second
HPT disk.
Impact A
This recommendation is to address a condition that may affect Flight Safety.
NOTE 3: This Service Bulletin can be accomplished in shop.
This Service Bulletin is offered to improve the reliability or performance of your CFM
product, or to help prevent the occurrence of the event or condition described in this
Service Bulletin. If the operator elects not to participate in the bulletin, that decision
will be taken into consideration by CFM in evaluating future product performance
issues that may arise in the operator’s ﬂeet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
Replacement of the seal.
(2) Condition:
The seal may have a condition, generated during manufacturing, that could
affect the life of the seal if re-installed to a second HPT disk within the
operating life of the seal.
(3) Cause:
The affected seals have geometry variations on the air slot breakedges, which
can make the seal more sensitive to loading variations when assembled to a
second HPT disk.
(4) Improvement:
None.
(5) Substantiation:
Substantiation is by analysis and ﬂeet experience.
F. Approval
The technical content of this Service Bulletin is approved by the FAA and under the
Authority of DOA No. EASA.21J.086.
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 3
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 4

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
G. Manpower
No additional man-hours are required to comply with this Service Bulletin.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
CFM56 Standard Practices Manual (SPM), CFMI-TP-SP .2
CFM56-5B Engine Shop Manual (ESM), CFMI-TP .SM.9
CFM56-5B Illustrated Parts Catalog (IPC), CFMI-TP .PC.12
J. Publications Affected
None.
K. Interchangeability
The physical and functional interchangeabilities are not affected.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
Part Number
Qty/
Eng Part Name
Unit ($)
Price
Pkg
Qty
Lead
Time
Days
1795M36P02 (1) Seal, Rotating
Air HPT Front
344,600.00 (1) 5
NOTE: Prices are provided for planning purposes and are subject to change.
(2) Other Spare Parts:
None.
(3) Consumables:
None.
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 4
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 5

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
B. Industry Support Information
Contact your Customer Support Manager (CSM).
C. Conﬁguration Chart
None.
D. Parts Disposition
Return old parts to:
The seals P/N 1795M36P01 and P/N 1795M36P02, removed to accomplish this
Service Bulletin, must be sent to the following address via the Service Request
system:
GE Aviation
Crescent Park Distribution Centers Inc
Attn: FOS Field Program Return
5443 Duff Drive
West Chester, Ohio, USA 45246
Report the seal and engine information to CFM Customer Support Center or Fleet
Support:
CFM SA ZONE CFM Inc. Zone
Customer Support Center:
http://mycfmportal.com
Widget AskCFM
OR
E-mail: cfm.csc@safrangroup.com
OR
PSE CFM
SAFRAN Aircraft Engines
Site de MELUN MONTEREAU
BP 1936 - 77019 Melun Cedex
FRANCE
OR
Phone: +33 1 64 14 88 66
F a x : + 3 316 41 48 76 5
GE Aviation Fleet Support:
http://www.geaviation.com/support
OR
E-mail (USA): aviation. ﬂeetsupport@ge.com
E-mail (China and Asia): aviation. ﬂeet-
support.cn@ge.com
OR
GE Aviation
M/D Rm. 285
One Neumann Way
OH 45215
USA
OR
USA Phone: 877-432-3272
International Phone: (513) 552-3272
China and Asia Phone: +86 21 38777666
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 5
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 6

ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
(1) Remove the suspect seal (Figure 1). Removal instructions have not changed.
Refer to the CFM56-5B ESM, 72-52-00, DISASSEMBLY .
(2) Write the word SCRAP close to the P/N and S/N markings. You can use any
method of permanent marking speci ﬁed in the CFM56 SPM, 70-10-00. Return
the removed seal (Figure 1) to CFM at the address speci ﬁed in paragraph
2.D., P arts Disposition and do as follows:
(a) Do a visual inspection of the seal (Figure 1) for cracks before you return
it to CFM. If there are cracks, notify CFM and also return the associated
HPT disk to CFM.
(3) Install the replacement seal (Figure 1). Installation instructions have not
changed. Refer to the CFM56-5B ESM, 72-52-00, ASSEMBLY 001.
July 27, 2018 CFM56-5B S/B 72-1074
Revision 01, December 05, 2018 PAGE 6
CFM PRO PRIETARY INFORMATION - Subject to the restrictions on the cover or ﬁrst page.

### Page 7 (OCR)

cim  SERVICE
BULLETIN
THE POWER  CFM56-5B
ENGINE - HPT Rotor Assembly (72-52-00) - Replacement of Rotating Air HPT Front Seals P/N
1795M36P01 and P/N 1795M36P02
VIEW A
SEAL
HPT DISK
REAR
' SHAFT
FRONT SHAFT
DAMPER SLEEVE  398888888
FORWARD
VIEW B
SEAL
FORWARD
5057591-01
Seal Location
Figure 1
July 27, 2018  CFM56-5B S/B 72-1074
Revision 01, December 05, 2018  PAGE 7
CEM PROPRIETARY INFORMATION - Subject to the restrictions on the cover or first page.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
