# Collins Aerospace Alert Service Bulletin 9613-005: Revision D

- Rights: © Collins Aerospace. Filed by the FAA in regulations.gov docket FAA-2026-3861; AD 2026-08-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Collins Aerospace Alert Service Bulletin 9613-005](https://openairdocs.org/service-documents/collins-aerospace/sb-9613-005.md)
- Title as filed: SB9613-005D
- Pages: 11
- PDF: https://openairdocs.org/files/sha256/20/9c/209c8ea3201b9ad6574d7a239e4c79e7507efc2c357b80a13d35ee7e003dac70
- Page: https://openairdocs.org/service-documents/collins-aerospace/sb-9613-005/file/209c8ea3201b

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
1 of 11 
 
 
 
 
Mandatory Service Bulletin 
 
For 
 
9613-()-()-() with Swivel Unit - Replacement of Bolts to Enable 
Forward and Aft-facing Operation 
 
 
 
 
 
B/E Aerospace Fischer GmbH 
(Part of Collins Aerospace) 
Müller-Armack-Str. 4 
D-84034 Landshut 
 
Tel.: +49 (871) 9 32 48-0 
E-Mail: info.fischer@collins.com 
www.fischer-seats.de 
 
The technical content of this document is approved under the authority of DOA no. EASA. 21J.111 and refers 
to EASA ETSO Authorization number EASA.21O10056272 for P/N 9613-()-()-() under which the minor change 
or repair is covered. 
  
Signatures 
 Date Name Signature 
Author: 03-Dec-2025   
CVE checked by:    
Approved (OoA)    
This document is the property of COLLINS AEROSPACE and contains confidential and/or proprietary information. You may not possess, 
use, copy or disclose this document or any information in it, for any purpose, including without limitation, to design, manuf acture or 
repair parts, or obtain any government approval to do so, without COLLINS AEROSPACE express written permission. Neither recei pt 
nor possession of this document alone, from any source, constitutes such permission. Possession, use, copying or disclosure by anyone 
without COLLINS AEROSPACE express written permission is not authorized and may result in criminal and/or civil liability.

### Page 2

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
2 of 11 
 
Record of Revisions 
Issue Date Changes Author CVE OoA 
A 08-Aug-2024 Initial issue JT SeS MF 
B 24-Oct-2024 Qty. of removed and installed parts corrected UB SeS MF 
C 13-Nov. 2024 SU-label removed, and SB-label added See title page 
D TBC SB Classification changed to Mandatory (AD 
anticipation) 
Section 1.4 “Safety Intent” added 
Sections 1.6, 1.7 updated due to new 
classification and compliance recommendations 
Section 2.2 SB Kit P/N creation 
Section 2.3 “Re-identified Parts” added 
Section 3.3 re-labeling instructions added 
 
This document is revised as a whole. 
Table of Contents 
Record of Revisions 2 
Table of Contents 2 
0 General Notes 2 
1 Planning Information 3 
2 Material information 5 
3 Accomplishment Instructions 6 
 
0 General Notes 
i. The term ‘Remove or Removed’ refers to any item that shall be removed from the aircraft 
and held for disposition. 
ii. Examine retained fasteners from equipment removal for condition. Replace unacceptable 
fasteners. 
iii. Ensure all removed items are clearly labelled. 
iv. Removal and Installation are per aircraft manufacturer’s Maintenance Manual Procedures, 
Standard SPM Procedures, Standard Wiring Practices Manuals Procedures and Component 
Maintenance Manuals Procedures. 
v. Removal of additional components may be necessary to gain access to components being 
modified per this installation instruction. If so, ensure aircraft records log the removal of items. 
Remove and re -install components in accordance with standard aircraft or component 
manufacturer’s Overhaul / Maintenance Manual Procedures. 
vi. Ensure surrounding area, components, wiring and harnesses are suitably protected from 
contamination or damage. 
vii. The operations as defined in these instructions, must be performed in the given sequence, 
however if they need to be modified to suit the maintainer’s standard practices then B/E 
Aerospace Fischer´s approval must be sought beforehand. 
viii. On completion of all work ensure all areas are cleaned, inspected and all debris and tools 
removed prior to release to service. 
 
0.1 Definitions and Abbreviations 
A/R  As Required 
AF  Aft-facing

### Page 3

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
3 of 11 
 
DOA  Design Organization Approval 
EASA  European Union Aviation Safety Agency 
ETSO  European Technical Standard Order 
FF  Forward-facing 
FWD  Forward 
i.a.w.  In accordance with 
P/N  Part Number 
RWD  Rearward 
S/N  Serial Number 
SB  Service Bulletin 
SRP  Seat Reference Point 
SU  Swivel Unit 
 
1 Planning Information 
1.1 SB Effectivity 
This SB is applicable to following variants of Medical Seat 230/305: 
9613-1-35-() 
 
The table below lists all affected S/N 
 
Nr. Seat P/N Collins internal Variant Nr. S/N 
1 9613-1-35-0X004B220X0001X 9613-V-140 3241 
2 9613-1-35-0X004B220X0001X 9613-V-140 3242 
3 9613-1-35-0X004B320X0001X 9613-V-141 3243 
4 9613-1-35-0X004B320X0001X 9613-V-141 3244 
5 9613-1-35-0X004B320X0001X 9613-V-141 3245 
6 9613-1-35-0X004B220X0001X 9613-V-140 3473 
7 9613-1-35-0X004B220X0001X 9613-V-140 3474 
8 9613-1-35-0X004B220X0001X 9613-V-140 3475 
9 9613-1-35-0X004B320X0001X 9613-V-141 3476 
10 9613-1-35-0X004B320X0001X 9613-V-141 3481 
11 9613-1-35-0X004B320X0001X 9613-V-141 3482 
12 9613-1-35-0X004B320X0001X 9613-V-141 3483 
13 9613-1-35-0X004B320X0001X 9613-V-141 3484 
14 9613-1-35-0X004B220X0001X 9613-V-140 3546 
15 9613-1-35-0X004B220X0001X 9613-V-140 3547 
16 9613-1-35-0X004B320X0001X 9613-V-141 3548 
17 9613-1-35-0X004B320X0001X 9613-V-141 3549 
18 9613-1-35-0X004B220X0001X 9613-V-140 3575 
19 9613-1-35-0X004B220X0001X 9613-V-140 3576 
20 9613-1-35-0X004B220X0001X 9613-V-140 3577 
21 9613-1-35-0X004B220X0001X 9613-V-140 3578 
22 9613-1-35-0X004B320X0001X 9613-V-141 3591 
23 9613-1-35-0X004B220X0001X 9613-V-140 3646

### Page 4

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
4 of 11 
 
Nr. Seat P/N Collins internal Variant Nr. S/N 
24 9613-1-35-0X004B220X0001X 9613-V-140 3647 
25 9613-1-35-0X004B220X0001X 9613-V-140 3648 
26 9613-1-35-0X004B220X0001X 9613-V-140 3649 
27 9613-1-35-0X004B320X0001X 9613-V-141 3703 
28 9613-1-35-0X004B320X0001X 9613-V-141 3958 
29 9613-1-35-0X004B320X0001X 9613-V-141 3959 
30 9613-1-35-0X004B320X0001X 9613-V-141 3960 
31 9613-1-35-0X004B320X0001X 9613-V-141 3961 
32 9613-1-35-0X004B320X0001X 9613-V-141 4114 
33 9613-1-35-0X004B320X0001X 9613-V-141 4115 
34 9613-1-35-0X004B320X0001X 9613-V-141 4116 
35 9613-1-35-0X004B320X0001X 9613-V-141 4117 
36 9613-1-35-0X004B320X0001X 9613-V-141 4118 
37 9613-1-35-0X004B320X0001X 9613-V-141 4119 
38 9613-1-35-0X004B320X0001X 9613-V-141 4120 
39 9613-1-35-0X004B320X0001X 9613-V-141 4121 
40 9613-1-35-0X004B320X0001X 9613-V-141 4122 
41 9613-1-35-0X004B220X0001X 9613-V-140 4131 
42 9613-1-35-0X004B220X0001X 9613-V-140 4132 
43 9613-1-35-0X004B320X0001X 9613-V-141 4133 
44 9613-1-35-0X004B320X0001X 9613-V-141 4134 
45 9613-1-35-0X004B320X0001X 9613-V-141 4135 
46 9613-1-35-0X004B320X0001X 9613-V-141 4175 
47 9613-1-35-0X004B320X0001X 9613-V-141 4180 
48 9613-1-35-0X004B220X0001X 9613-V-140 4202 
49 9613-1-35-0X004B220X0001X 9613-V-140 4203 
50 9613-1-35-0X004B220X0001X 9613-V-140 4204 
51 9613-1-35-0X004B220X0001X 9613-V-140 4205 
52 9613-1-35-0X004B320X0001X 9613-V-141 4206 
53 9613-1-35-0X004B320X0001X 9613-V-141 4207 
54 9613-1-35-0X004B320X0001X 9613-V-141 4208 
55 9613-1-35-0X004B320X0001X 9613-V-141 4209 
56 9613-1-35-0X004B320X0001X 9613-V-141 4210 
57 9613-1-35-0X004B320X0001X 9613-V-141 4211 
58 9613-1-35-0X004B320X0001X 9613-V-141 4212 
59 9613-1-35-0X004B320X0001X 9613-V-141 4213 
Table 1 – affected P/Ns 
1.2 Concurrent requirements 
None 
1.3 Reason 
Due to a parts list error in the Enterprise Resource Planning system, the affected Medical Seats 
230/305 variants were built with an incorrect version of the Swivel Unit, not in compliance with the 
approved design data. The affected seat variants (see Table 1) are certified for FF and AF 
installation (with swivel Unit P/N 9715-2-()), whereas the installed version of the Swivel Unit is 
certified for AF installation only (swivel unit P/N 9715-1-()). Consequently, the entire seating system

### Page 5

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
5 of 11 
 
consisting of Seat (9613-1-35-()) and Swivel Unit (9715-1-()) is not suitable for FF installation it is 
only suitable for AF installation. 
1.4 Safety Intent 
During the initial seat + swivelling unit system certification, the P/N 9715-1-() was recording a failure 
in the attachment points durin g the dynamic FF test , which could result  in possible injuries or 
casualties for the occupant in a crash scenario with predominant forward forces. 
Any seat 9613-1-35-() with Swivel Unit P/N 9715-1-() installed in a FF direction needs to be 
immediately removed from service until application of the present SB. 
1.5 Description 
This SB describes how to convert the AF certified Swivel Unit P/N 9715-1-() into a FF and AF certified 
swivel Unit P/N 9715-2-(), restoring the approved design data and the proper level of safety  for the 
affected variants of the Medical Seats 230/305. 
1.6 Service Bulletin Classification 
This Service Bulletin is mandatory (AD anticipation). 
1.7 Compliance recommendation 
Non-compliance affects safety function of the seat. 
This Service Bulletin must be embodied within 1 month from the publication of the related EASA AD. 
1.8 Approval 
The technical content of this document is approved under the authority of DOA no. EASA. 21J.111 
and refers to EASA ETSO Authorization number EASA.21O.10056272 for P/N 9613 -()-()-() under 
which the minor change or repair is covered. This SB restores the ETSO approved seat configuration. 
1.9 Manpower 
Man-hours to accomplish this SB: 0,5 man-hours 
1.10 Weight and Balance 
The weight and balance effects of this SB are negligible. 
1.11 Electrical Load 
Not applicable 
1.12 Software accomplishment summary 
Not applicable 
1.13 References 
[Ref 1.] B/E Aerospace Fischer GmbH Component Maintenance Manual with Illustrated Parts List 
for Medical Seat 230/305, Part No. 9613-()-()-(), Ref. 25-24-01, Revision E or later. 
[Ref 2.] B/E Aerospace Fischer GmbH Component Maintenance Manual with Illustrated Parts List 
for Swivel Unit, Part No. 9715-()-(), Ref. 25-24-09, Revision D or later. 
1.14 Other Publications Affected 
No change is made to the existing Instructions for Continued Airworthiness. 
1.15 Interchangeability of Parts 
Not applicable 
2 Material information 
2.1 Parts removed 
P/N Nomenclature Qty Notes 
LN9438-AM6x14 Countersunk Screw 8 discard

### Page 6

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
6 of 11 
 
Table 2 – Removed parts 
2.2 Parts installed 
P/N Nomenclature Qty Notes 
9613-020B Kit SB9613-005 1  
   9715-031A Cone Washer 8 part of kit 
   LN9037-06016 Hex-Head Screw 8 part of kit 
   9715-099A Nameplate 1 part of kit / S/N specific 
Table 3 – Installed parts 
Parts can be ordered from: 
B/E Aerospace Fischer GmbH 
Müller-Armack-Str. 4 
D – 84034 Landshut 
Germany 
Tel.: +49-(0)871-93248-0 
Email: spares@fischer-seats.de 
 
2.3 Re-identified parts 
Given the classification of this SB, the parts shall be re-identified as follows: 
Pre SB P/N Description Post SB P/N 
9715-1-() Swivelling Unit 9715-2-() 
 
NOTE: the application of this SB at the previous revision was not requesting a part re-labelling but 
rather the application of the SB label. The swivel units subjected to previous revision of the SB must 
be re-labelled in accordance to the instructions contained in section 3.2.7. 
2.4 Consumables 
P/N Nomenclature Qty Notes 
Loctite™ 243 Screw locking fluid A/R By Henkel corporation 
Table 4 – Consumables List 
2.5 Tooling 
Standard workshop tooling. 
 
3 Accomplishment Instructions 
Modify each seat in accordance with the following instructions. 
3.1 Preparation 
3.1.1  If required, remove the seat from the aircraft i.a.w. CMM [Ref 1.] to get sufficient access to the 
Swivel Unit upper plate. 
3.1.2  Make sure, that the Swivel Unit is set straight forward or rearward and rotational locking is 
engaged.

### Page 7

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
7 of 11 
 
3.2 Modification 
3.2.1  Remove and discard the 4 outer countersunk screws LN9438-AM6x14, as shown in Figure 1 
 
    Do not remove the two adjacent screws at the four corners at the same time, otherwise 
the parts underneath will come loose and misalign! Only remove one screw per corner 
and insert one hex-head screw, according to the sequence stated in this SB. 
 
 
Figure 1: Removal of outer countersunk screws (Seat omitted for clarity)

### Page 8

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
8 of 11 
 
3.2 Modification 
3.2.2  Install 4 Cone Washers 9715-031A and 4 Hex-Head Screws LN9037-06016 
Apply Loctite™ 243. 
Tightening torque: 6 Nm ± 10% 
 
 
Figure 2: Installation of 4 Cone Washers and 4 Hex-Head Screws 
 
3.2.3  Remove and discard the 4 inner countersunk screws LN9438-AM6x14. 
 
 
Figure 3: Removal of inner countersunk screws

### Page 9

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
9 of 11 
 
3.2 Modification 
3.2.4  Install 4 Cone Washers 9715-031A and 4 Hex-Head Screws LN9037-06016. 
Apply Loctite™ 243. 
Tightening torque: 6 Nm ± 10% 
 
 
Figure 4: Installation of 4 Cone Washers and 4 Hex-Head Screws 
 
3.2.5  Remove Nameplate. 
3.2.6  Clean and degrease area for new Nameplate.

### Page 10

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
10 of 11 
 
3.2 Modification 
3.2.7  Apply new name plate P/N 9715-099A (part of Kit), as shown in Figure 6. 
 
 
Figure 5: Nameplate 
 
  
Figure 6: Position Nameplate 
 
    Take care to apply the correct nameplate with correct serial number and date of 
manufacture.  
    Serial number must be provided before ordering a kit. 
 
 
3.3 Assembly, Final Inspection and Close-Up 
3.3.1  Make sure all tools, materials and equipment are removed from the swivel unit / seat. 
Make sure the swivel unit / seat are clean. 
3.3.2  Perform inspection and checks in accordance with [Ref 1.] and [Ref 2.]. 
3.3.3  Record embodiment of SB 9613-005 in seat documentation in accordance with company 
procedures. 
3.3.4  Email Service Bulletin Completion Record to: 
E-Mail: occurrence-fischer@collins.com 
 
  
nameplate

### Page 11

ALERT SERVICE BULLETIN – SEAT P/N: 9613-()-()-() FS-FRM-0252-00 
 
Doc.-No.: 
SB 9613-005 
Issue 
D 
Date 
03-Dec-2025 
COLLINS AEROSPACE proprietary 
Subject to the restrictions on page 1. 
Page 
11 of 11 
 
 
Alert Service Bulletin SB 9613-005 Completion Record 
 
Email this form to Fischer DO at occurrence-fischer@collins.com 
 
The following seats have been modified in accordance with this Service Bulletin: 
Seat type Seat P/N Seat S/N 
Medical Seat 230/305 9613-1-35-  
   
   
   
   
 
 
Signature  
Print name  Date  
Job Title  Company  
Contact phone  Contact email  
 
 
Optional data 
Helicopter type  Serial Number  
Registration  Flight Hours  
Comments / 
Suggestions

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
