# Daher Service Bulletin 70-304: No revision named

- Rights: © Socata. Filed by the FAA in regulations.gov docket FAA-2023-0425; AD 2023-11-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Daher Service Bulletin 70-304](https://openairdocs.org/service-documents/daher/sb-70-304.md)
- Title as filed: Daher Aerospace Service Bulletin SB70-304
- Pages: 12
- PDF: https://openairdocs.org/files/sha256/37/f6/37f641b05898df0f45ef7801dfee05e58ddcb6b73abf0a194495e2bf181f5e9f
- Page: https://openairdocs.org/service-documents/daher/sb-70-304/file/37f641b05898

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Page 1 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
REVISION 1
SUBJECT: EMERGENCY EXIT DOOR OPENING
REFERENCE DOCUMENT: 
Modification No. MOD70-0793-25 Version A, B or C
EFFECTIVITY: TBM aircraft S/N 434 to 1424 except S/N 1408 and 1420
/C0111 TBM 700 /C0111 TBM 700 G1000 /C0111 TBM 850 CFD /C0084 TBM 850 AFD /C0084 TBM 900
/C0084 TBM 910 /C0084 TBM 930 /C0084 TBM 940 /C0084 TBM 960
NOTE:
If an aircraft listed in the effectivity has an embodied modification or repair that is not of Daher
Aerospace origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for an adaptation necessary
before incorporation of the Service Bulletin.
REASON:
A. PROBLEM
Interference between emergency exit door panel and upholstery panel, which may
require additional effort to open the emergency exit door.
B. REASON
Insufficient clearance between the two panels.
C. SOLUTION
Emergency exit door panel modification to ease emergency door opening.
SUMMARY:
A. PRELIMINARY STEPS
B. PROCEDURE
C. FINAL STEPS
APPLICATION:
At the earliest opportunity / inspection, at the latest, before 1 year and 1 month after SB
issuance reference.
SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Daher Aerospace
Customer Support
Airplane Business Unit Phone: 33 (0)5 62.41.73.00
65921 Tarbes Cedex 9 tbmcare@daher .com
France

### Page 2

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 2 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
WARRANTY:
Parts and manhours will be covered under warranty (1). This campaign will end 1 year and
1 month after the SB issuance reference date.
(1) Only if applied within the TBM Service Network (The List of TBM Service Network is
available on website www.tbm.aero).
OPERATIONAL CONSEQUENCES / TRAINING:
Not applicable
MAINTENANCE CONSEQUENCES:
No changes to the scheduled maintenance
PROCURABLE MATERIAL:
- Parts to be ordered from your TBM spare parts distributor.
Item Figure Part Number Description Qty/aircraft
12/13/21 2 / 3 T700G252006500100 Strap assy 1
NOTE:
Part Numbers given in this Service Bulletin could be amended between the time of approval
of the SB and the delivery of the kit without impact on this Service Bulletin approval or for the
operators. If the part numbers change, Daher Aerospace will inform operators through an
update of the SB. Operators must contact their TBM spare parts distributor for any question.
CONSUMABLE MATERIAL or OTHER PRODUCTS (Local purchase):
- Self-gripping strap SJ3527 or equivalent
TOOLS:
- Standard aeronautical maintenance station tools
AFFECTED PUBLICATIONS: (Documents updated in relation to this SB distribution)
IPC Chapters:
- 25-21-01
- 25-21-02
AMM Chapters:
- 25-21-02
- 52-20-00
CMM: Not applicable
POH: Not impacted

### Page 3

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 3 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
RELATED DOCUMENTS: (Documents necessary to apply procedure described hereafter)
AMM Chapters:
- 25-21-02
- 52-20-00
ASSOCIATED DOCUMENTS: 
- None
MANPOWER:
- 1 aeronautical mechanic: 1 hour
NOTE:
The manpower estimates given in this Service Bulletin assume that the work will be done by
Service Centers having multiple aircraft with experienced personnel.
TECHNICAL INCIDENCES:
- Weight: Negligible
- Arm: Negligible
- Electrical consumption: Not applicable
PARTS TO BE RE-IDENTIFIED:
YES /C0084 NO /C0111
 Emergency Exit trim
panel (11)
Reference
Pre-SB70-304-25
Reference
Post-SB70-304-25
Aircraft Pre-MOD70-0628-25 T700G2520060000 T700G2520060001
Aircraft Post-MOD70-0628-25 T700G2520230000 T700G2520230002
Aircraft Post-MOD70-0783-25 SIA005B-0004-XXX (1) SIA005B-0070-XXX (1)
(1) XXX value is kept from the previous reference to the new one (corresponding to
upholstery panel harmony).

### Page 4

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 4 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
DESCRIPTION OF ACCOMPLISHMENT INSTRUCTIONS :
WARNING
 
MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND CAUTIONS INCLUDED IN
THE REFERENCED PROCEDURES.
NOTE:
Operations required in this Service Bulletin must be accomplished by persons authorized by
their Airworthiness Authorities and according to the procedure described hereafter.
A. PRELIMINARY STEPS - See Figure 2
1) Make sure the “SOURCE” selector is set to “OFF” and the crash lever is down.
2) Install the warning sign prohibiting “SOURCE” selector operation
WARNING
DO NOT OPERATE:
MAINTENANCE WORK IN PROGRESS.
3) Remove emergency exit trim panel (11) - refer to Chapter 25-21-02 of the
Maintenance Manual.
B. PROCEDURE
CAUTION
 
DEGREASE ALL AREAS WHERE SELF-GRIPPING ARE TO BE INSTALED.
Aircraft up to S/N 1407 - See Figures 1, 2, 3 and 4
1) Using any appropriate means, cut, remove and discard the upper part of the 247R
panel self-gripping strap (2) - See Figure 1, area to be modified (3) for dimensions.
2) From the strap that has been ordered (P/N T700G252006500100), remove the
self-gripping straps (12) and (13).
3) On emergency exit trim panel (11) apply the self-gripping strap (12) - See Figure 2
for location.
CAUTION
 
ON SEVERAL AIRCRAFT , AN ADDITIONAL SPECIFIC LANGUAGE PLACARD IS
PRESENT BELOW THE ENGLISH ONE ON THE UPPER PART OF THE HANDLE
(14) AND COULD BE MASKED BY THE NEW STRAP (21).
SO, THIS SPECIFIC PLACARD MUST BE MOVED ON THE LOWER PART OF THE
HANDLE (14) IN ORDER TO ENSURE ITS VISIBILITY .
4) On handle (14) apply the self-gripping strap (13) - See Figure 2 for location.
NOTE:
It can be necessary to reduce the self-gripping strap (13) width in accordance with
the handle (14) upper part geometry.
5) Using self-gripping straps (12), install strap (21) on emergency exit trim panel (11)
- See Figure 3.

### Page 5

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 5 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
6) Remove and discard screw (33), washer (32) and clip (31).
7) In the panel identification area (35), see Figure 4, re-identify emergency exit trim
panel (11) - see Paragraph “PARTS TO BE RE-IDENTIFIED” for reference.
Aircraft from S/N 1409 to 1424 except 1420 - See Figures 1A, 2A, 3 and 4
1) Using any appropriate means, cut, remove and discard the two upper parts of the
247R panel self-gripping strap (2) - See Figure 1A, area to be modified (3) for
dimensions.
2) From the strap that has been ordered (P/N T700G252006500100), remove the
self-gripping straps (12) and (13).
3) In order to install the two self-gripping straps (12), remove two areas in insulating
panel (17) - See Figure 2A, item 16 for dimensions.
4) On emergency exit trim panel (11) apply the self-gripping strap (12) - See Figure 2A
for location.
5) On handle (14) apply the self-gripping strap (13) - See Figure 2A for location.
6) Using self-gripping straps (12), install strap (21) on emergency exit trim panel (11)
- See Figure 3.
7) In the panel identification area (35), see Figure 4, re-identify emergency exit trim
panel (11) - see Paragraph “PARTS TO BE RE-IDENTIFIED" for reference.
C. FINAL STEPS - See Figures 3 and 4
Aircraft up to S/N 1407
CAUTION
 
ENSURE AN IDENTICAL CLEARANCE (34) ALL AROUND THE EMERGENCY EXIT
TRIM PANEL (11).
IN ORDER TO CREATE A SUFFICIANT CLEARANCE ON THE UPPER PART OF
THE EMERGENCY EXIT TRIM PANEL (11), IT CAN BE NECESSARY TO INCREASE
THE DIAMETER (MAXIMUM DIAMETER 0.6 IN) OF THE TWO PANEL
POSITIONING HOLES (23).
Aircraft S/N 1409 to 1424 except 1420
CAUTION
 
ENSURE AN IDENTICAL CLEARANCE (34) ALL AROUND THE EMERGENCY EXIT
TRIM PANEL (11).
All
1) Install emergency trim panel - Refer to Chapter 25-21-02 of the Maintenance
Manual.
CAUTION
 
IN THE CONTEXT OF THIS SERVICE BULLETIN, IT IS NOT NECESSARY TO
PERFORM THE WATER TIGHTNESS TEST .
2) Perform a check of emergency exit - refer to Chapter 52-20-00 of the Maintenance
Manual.
NOTE:
To perform the check of emergency exit, make sure that upholstery panel 247R (1) and
emergency trim panel (11) are installed.

### Page 6

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 6 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
3) Make sure all the tools and materials are removed and the work area is clean and free
from debris.
UPDATING OF THE AIRCRAFT DOCUMENTATION:
Aircraft not equipped with MOD70-0502-52 “Emergency exit - design modification”
Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR
OPENING” (Reference MOD70-0793-25 Version B), make an appropriate maintenance
record entry.
Aircraft equipped with MOD70-0502-52 “Emergency exit - design modification”
Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR
OPENING” (Reference MOD70-0793-25 Version A), make an appropriate maintenance
record entry.
Aircraft equipped with MOD70-0783-25 “Upholstery panels 2022”
Upon completion of Service Bulletin No. SB70-304-25 “EMERGENCY EXIT DOOR
OPENING” (Reference MOD70-0793-25 Version C), make an appropriate maintenance
record entry.
WARNING: DAHER AEROSPACE considers that it is MANDATORY for operators to comply with the
instructions of this SB.
Operators who arbitrarily ignore the compliance statement indicated in this SB do so at their
own risk.

### Page 7 (OCR)

TBM AIRCRAFT
SERVICE BULLETIN  SB 70-304  25  ATA No.
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
1 - Upholstery panel 247R
2 - Self-gripping strap
3 - Area to be modified
BEFORE SB70-304-25
FWD
AFTER SB70-304-25
FWD
C4252100AAAEMA4600
20.9 in
24.8 in
Figure 1 - Upholstery panel 247R modification - Aircraft S/N 434 to 1407
JUL 22  Page 7 / 12
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.

### Page 8 (OCR)

TBM AIRCRAFT
SERVICE BULLETIN  SB 70-304  25  ATA No.
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
1 - Upholstery panel 247R
2 - Self-gripping strap
3 - Area to be modified
FWD  BEFORE SB70-304-25
FWD  AFTER SB70-304-25
24252100A A AGMA4600
Figure 1A - Upholstery panel 247R modification - Aircraft S/N 1409 to 1424 except 1420
JUL 22  Page 8 / 12
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.

### Page 9 (OCR)

TBM AIRCRAFT
SERVICE BULLETIN  SB 70-304  25  ATA No.
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
11 - Emergency Exit trim panel
12 - Self-gripping strap
13 - Self-gripping strap
14 - Handle
C10  15 - Emergency exit door
C8
FWD
2.56 in
1.18 in  1.18 in
12
NEWD  15
C4252100AAAEMA14600  13  14
Figure 2 - Self-gripping strap installation - Aircraft S/N 434 to 1407
JUL 22  Page 9 / 12
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.

### Page 10

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 10 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 2A - Self-gripping strap installation - Aircraft S/N 1409 to 1424 except 1420
11 - Emergency Exit trim panel
12 - Self-gripping strap
13 - Self-gripping strap
14 - Handle
15 - Emergency exit door
16 - Area to be cut (insulating panel)

### Page 11

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 11 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 3 - Strap installation
1 - Upholstery panel 247R
11 - Emergency exit trim panel
12 - Self-gripping strap
13 - Self-gripping strap
14 - Handle
21 - Strap
22 - Self-gripping strap
23 - Panel positioning holes (up to S/N 1407)

### Page 12

SERVICE BULLETIN
TBM AIRCRAFT
MANDATORY
The technical content of this document is approved
under the authority of the DOA ref EASA.21J.013
and is the subject to an AD
SB 70-304
REVISION 1
25
 ATA No.
Page 12 / 12JUL 22
Rev. X - DAT XX
This document is the property of Daher Aerospace. Reproduction prohibited without prior Daher Aerospace agreement.
Figure 4 - Emergency exit trim panel modification / installation
1 - Upholstery panel 247R
11 - Emergency exit trim panel
22 - Self-gripping strap
23 - Panel positioning holes (up to S/N 1407)
31 - Clip
32 - Washer
33 - Screw
34 - Clearance
35 - Panel identification area

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
