# DART Aerospace Service Bulletin 2020-09

Copy: Revision A ("SB 2020-09 Rev A"), 24 pages: PDF https://openairdocs.org/files/sha256/5d/97/5d97c0b047ed5847fcbcd5c1d00b1de1b7b841cb17d5f7749f647cbf92ddd9ac; text https://openairdocs.org/service-documents/dart-aerospace/sb-2020-09/file/5d97c0b047ed.md. Rights: © DART Aerospace. Filed by the FAA in regulations.gov docket FAA-2024-1004; AD 2024-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [DART Aerospace](https://openairdocs.org/service-documents/dart-aerospace.md)
- Type: Service bulletin (Service Bulletin)
- Number: 2020-09
- Latest revision known: 2020-09, Revision A, dated March 16, 2021 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/dart-aerospace/sb-2020-09

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-20-07](https://openairdocs.org/ad/2024-20-07.md), effective Dec 5, 2024: Revision A

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/dart-aerospace/sb-2020-09/proposed.md).

## Text (24 pages)

Rights: © DART Aerospace. Filed by the FAA in regulations.gov docket FAA-2024-1004; AD 2024-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

3030 Enterprise Court, Suite A, Vista, California 92081-8347 
PH: +1 760-724-5300 FAX: +1 760-509-1562 
www.dartaerospace.com 
 
 
COPYRIGHT  2021 BY APICAL INDUSTRIES, INC DBA DART AEROSPACE  
THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED 
OR COMMUNICATED TO ANY OTHER PERSON WITHOUT WRITTEN PERMISSION FROM APICAL INDUSTRIES, INC. DBA DART AEROSPACE 
 
 
Service Bulletin 
Document Number: SB2020-09 
Date:  2021-MAR-16 
Revision:  A 
Effective Model:  604.0018 Kit Series, EC130B4 Emergency Floats and  
 EC130B4 Emergency Floats with Liferaft (STC SR01687LA) 
 
Aircraft Kit S/Ns DART Kit P/N Description 
EC130B4 VT084841 and previous 
604.0018-100 
604.0018-300 
604.0018-400 
604.0018-500 
EC130B4 Emergency 
Floats and EC130B4 
Emergency Floats with 
Liferaft Kit  
 
 
NOTE: This Service Bulletin is sent to the operators of record for the model aircraft as 
shown above. If an aircraft has been leased or sold, send this service bulletin to the 
new operator.

### Page 2

SUBJECT: DOCUMENT NO: 
SERVICE BULLETIN SB2020-09 
REFERENCE DRAWING: Rev. A 
604.0018 2021-MAR-16 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace See the Non-Disclosure Notice on the cover page. 
All Rights Reserved Page 2 of 24 
LOG OF REVISIONS 
Rev Date Pages Description Approval 
N/C 2021-JAN-11 All Initial Release J. Gardiner
A 2021-MAR-16 CVR Revised Typo, S/N J. Gardiner
4, 5, 14, 16, 
19, 21 
Revised Typo, P/N 607.1601 to 607.1602 
8, 9, 10, 11, 
12, 13 
Revised Typo, Removed -500 from Table 
Titles 
14, 16, 19, 21 Revised Typo, Fixture to Tool

### Page 3

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 3 of 24 
SAFETY SUMMARY 
GENERAL PRECAUTIONS 
Personal Protective Equipment (PPE) shall be worn when exposed to flying particles, liquid 
chemicals, or other potential hazards to the skin, eyes, ears, or respiratory system. 
Ensure that the work area is free from dirt and foreign matter and that the valve is protected 
from environmental hazards and contaminants that could otherwise damage its function. 
Failure to comply with or deviate from the procedure may negatively affect the equipment. It is 
the operator’s responsibility to comply with these procedures. 
 
DEFINITIONS 
The following precaution definitions are used to indicate the seriousness of the hazard or 
conditions. All of the following may refer to a maintenance procedure, practice, condition, etc. 
WARNING: THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, COULD 
RESULT IN PERSONAL INJURY, DEATH, OR LONG-TERM HEALTH 
CONDITIONS. 
CAUTION: THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, MAY RESULT 
IN DAMAGE TO OR DESTRUCTION OF EQUIPMENT, OR THE LOSS OF 
MISSION EFFECTIVENESS. 
NOTE: This indicates information that aids in understanding or provides additional detail on 
the methods of a procedure.

### Page 4

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 4 of 24 
1.0 INTRODUCTION 
1.1 SUBJECT 
A system check is required on all DART pull cables that are used to activate float and liferaft 
inflation reservoirs. 
1.2 BACKGROUND 
DART has developed a Pull Cable Test Tool to replicate the loads that are required to activate 
the inflation reservoirs found in the 604.0018 EC130B4 Series Emergency Floats and 
Emergency Floats with Liferaft as follows: 
Pull Cable Test Tool P/N 606.7803:  
To test the EC130B4 Kit P/N 604.0018-400 and P/N 604.0018-500 (ref. Section 2.1 of this SB).  
This tool is also required to test Valve Assembly P/N 645.5902-270-216-08 on later EC130B4 
Kit P/N 604.0018-300. 
Pull Cable Test Tool P/N 607.1602: 
To test the EC130B4 Kit P/N 604.0018-100 and P/N 604.0018-300 (ref. Section 2.2 of this SB). 
1.3 ACTION 
This SB provides instructions on how to perform a check of the float and liferaft cable rigging 
using the Pull Cable Test Tool and a guide to make rigging changes to ensure proper activation 
of the float and liferaft reservoirs.   
1.4 COMPLIANCE 
This SB is MANDATORY. End user must comply with this SB by the next 100 Hr. inspection or 
within 6 months of receipt of this SB, whichever comes first. 
1.5 MANPOWER 
Maintenance-man-hours are based on hands-on time and can differ by facility based upon the 
availability of qualified personnel. The estimated time to complete this SB is one man-hour for 
test and up to 8 man-hours for cable replacement and adjustment. 
1.6 WEIGHT AND BALANCE 
Incorporating this SB has no effect on the A/C weight and balance. 
1.7 PUBLICATIONS AFFECTED 
No publications are affected.  
1.8 APPROVAL 
The modifications described in the Accomplishment Instructions have been shown to comply 
with applicable Federal Aviation Regulations.

### Page 5

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 5 of 24 
1.9 REFERENCES  
1. OIM-5 Operational Instruction Manual for Pull Cable Test Tool (P/N 606.7803) 
2. OIM-9 Operational Instruction Manual for Pull Cable Test Tool (P/N 607.1602) 
3. OIM-11 Operation Instruction Manual for General Pull Cable Rigging and Testing 
Procedure

### Page 6

SUBJECT: DOCUMENT NO: 
SERVICE BULLETIN SB2020-09 
REFERENCE DRAWING: Rev. A 
604.0018 2021-MAR-16 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace See the Non-Disclosure Notice on the cover page. 
All Rights Reserved Page 6 of 24 
2.0 ACCOMPLISHMENT INSTRUCTIONS 
2.1 EC130B4 KIT P/N 604.0018-400 AND P/N 604.0018-500 
2.1.1 GENERAL 
WARNING: ENSURE THAT THE SAFETY PINS ARE INSTALLED IN THE RESERVOIR 
ASSEMBLIES. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR 
ASSEMBLIES UNTIL THE INSTALLATION IS COMPLETE. 
WARNING: AFTER DISCONNECTING THE HOSE FROM THE VALVE, IMMEDIATELY 
PLACE DIFFUSER CAP, P/N 601.1674, ON THE VALVE OUTLET PORT. 
1. Disconnect the reservoir feed hoses from their respective valve assemblies and
immediately attach a diffuser cap on the outlet ports of each valve assembly.
2. Remove the cotter pins (F/N 47) from each reservoir shroud. (Figure 1)
3. Thread a nut (F/N F), then a swivel locknut (F/N B) away from the shroud (F/N C).
(Figure 2)
4. Remove the cable rod (F/N A) from the pull rod (F/N D) and remove the pull cable
assembly from the valve. (Figure 2)
5. Verify pull cable rigging at the dual cable plate per Section 2.1.2.
6. Verify pull cable forces for the float system per Section 2.1.3.
7. Verify pull cable forces for the liferaft system, if installed, per Section 2.1.4.
8. If pull forces are acceptable, reattach the pull cables and the hoses to the reservoir
assemblies per ICA130-1 Rev M and later and ICA130-2 Rev H and later as applicable.
9. If pull forces are not acceptable, contact Dart Customer Support.
10. If INOPPING the system is desirable, proceed to Appendix A.

### Page 7

SUBJECT: DOCUMENT NO: 
SERVICE BULLETIN SB2020-09 
REFERENCE DRAWING: Rev. A 
604.0018 2021-MAR-16 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace See the Non-Disclosure Notice on the cover page. 
All Rights Reserved Page 7 of 24 
Figure 1: Cable Rigging Detail 
Figure 2: Pull Cable Installation 
Table 1: Parts List for Figure 1 and Figure 2 
F/N P/N Description QTY 
A 645.7810 Cable Rod REF 
B 645.7110 Swivel Locknut REF 
C 645.7710 Shroud REF 
D 645.6910 Pull Rod REF 
E 645.7910 Cable Housing REF 
F 601.1525 Nut (NAS509-6) REF 
47 601.0718 Cotter Pin (MS24665-151) 2 
A 
B C 
E 
D 
F

### Page 8

SUBJECT: DOCUMENT NO: 
SERVICE BULLETIN SB2020-09 
REFERENCE DRAWING: Rev. A 
604.0018 2021-MAR-16 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace See the Non-Disclosure Notice on the cover page. 
All Rights Reserved Page 8 of 24 
2.1.2 DUAL CABLE PLATE RIGGING (AS NEEDED) 
WARNING: ENSURE THAT THE SAFETY PINS ARE INSTALLED IN THE RESERVOIR 
ASSEMBLIES. DO NOT REMOVE THE SAFETY PINS UNTIL INSTALLATION 
IS COMPLETE. 
1. Remove the cover from the dual cable plate (F/N 21). Retain cover and screws for later
use. (See Figure 3).
NOTE: Figure 3 is for reference only. The dual cable plate assy (F/N 21) must remain 
installed on the aircraft. 
COVER 
Figure 3: Dual Cable Plate 
Table 2: Parts List for Figure 3 
Find Number Part Number Description Qty 
21 604.0021-100 Dual Cable Plate Assy 1

### Page 9

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 9 of 24 
2. Attach the end of the pull cable (F/N 13) to the dual cable block (F/N 20) by pulling the 
cable out to its maximum length and threading the cable into the block until it bottoms 
out. Secure the cable by tightening down the jam nut against the face of the dual cable 
block. (See Figure 4) 
 
20 13 REF 
 
Figure 4: Dual Cable Block 
Table 3: Parts List for Figure 4 
Find Number Part Number Description Qty 
13 624.6306 Pull Cable Ref 
20 624.7410 Dual Cable Block 1

### Page 10

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 10 of 24 
3. Install the cable from the pull handle (F/N 13) along with dual cable block into the dual 
cable plate (F/N 21). Hand tighten the jam nuts to the face of the dual cable plate to 
allow for final positioning later. (See Figure 5) 
 
13 REF 
21 REF FWD 
 
Figure 5: Pull Cable from Cyclic Stick in Dual Cable Plate 
Table 4: Parts List for Figure 5 
Find Number Part Number Description Qty 
13 624.6306 Pull Cable Ref 
21 604.0021-100 Dual Cable Plate Ref 
4. Install cables (F/N 15 and F/N 16) into the dual cable plate.  
5. The shorter cable (F/N 15) should be placed in the hole on the outboard side of the dual 
cable plate while the longer cable (F/N 16) is installed in the hole on the inboard side of 
the dual cable plate.  
6. Place the ends of the cables through the holes in the back of the dual cable plate and 
thread the large jam nuts onto the pull cable housing.

### Page 11

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 11 of 24 
7. Hand tighten the large jam nuts against the back of the dual cable plate. (See Figure 6) 
 
21 REF 
15 
16  
PULL CABLE 
HOUSING 
 
Figure 6: Dual Cables in Dual Cable Plate 
Table 5: Parts List for Figure 6 
Find Number Part Number Description Qty 
15 624.6310 Pull Cable 1 
16 624.6308 Pull Cable 1 
21 604.0021-100 Dual Cable Plate Ref

### Page 12

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 12 of 24 
8. Place the ends of the pull cable rods through the holes in the dual cable block and 
thread one of the small jam nuts on the pull cable rod until it bottoms out and tighten the 
second jam nut down against the first. (See Figure 7) 
 
JAM NUTS 
PULL CABLE 
ROD 
16 REF 
15 REF 
 
Figure 7: Dual Cables Installed in Cable Block 
Table 6: Parts List for Figure 7 
Find Number Part Number Description Qty 
15 624.6310 Pull Cable Ref 
16 624.6308 Pull Cable Ref

### Page 13

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 13 of 24 
9. Attach the extension spring (F/N 38) to the Dual Cable Block (F/N 20) and the Dual 
Cable Plate (F/N 21).  
10. Position the pull cable (F/N 13) by adjusting the large jam nuts on the face of the pull 
cable housings such that the single cable is pulled out to its maximum and there is slight 
tension in the spring.  
11. Tighten all jam nuts on the dual cable plate to 50-60 in. lbs. (See Figure 8) 
 
PULL FROM 
VALVE END  
38 
PULL TO 
MAXIMUM 
 13 REF 21 REF 
20 REF 
 
Figure 8: Dual Cable Plate Final Rigging 
Table 7: Parts List for Figure 8 
Find Number Part Number Description Qty 
13 624.6306 Pull Cable Ref 
20 624.7410 Dual Cable Block Ref 
21 604.0021-100 Dual Cable Plate Assy Ref 
38 601.1808 Extension Spring 1

### Page 14

SUBJECT: DOCUMENT NO: 
SERVICE BULLETIN SB2020-09 
REFERENCE DRAWING: Rev. A 
604.0018 2021-MAR-16 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace See the Non-Disclosure Notice on the cover page. 
All Rights Reserved Page 14 of 24 
2.1.3 FLOAT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY UNTIL
THE INSTALLATION IS COMPLETE.
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED
FOR ATTACHMENT.
C. EYE PROTECTION IS RECOMMENDED.
NOTE: Pull Cable Test Tool P/N 606.7803 must be procured from Dart prior to performing 
this procedure. 
1. Refer to Dart document OIM-5 for test tool calibration. When completed, proceed to the
next step.
2. Refer to Dart document OIM-11 for the procedure for reservoir rigging and testing using
Pull Cable Test Tool, P/N 606.7803.
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 606.7803, must be 
25 lbf (111.2 N) or less. 
NOTE: The latest revisions of OIM-5 and OIM-11 should be obtained from the Dart website 
at www.dartaerospace.com prior to performing the rigging procedure. 
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hoses
(F/N 5) to the appropriate valve. (Figure 9)
4. Install the warning tag onto the safety pin and place the safety pin into the handle.
5. Install shear rivet into the small through hole on the inflation handle assembly (F/N 11).
(Figure 10)
6. Remove the safety pins from the float reservoir assemblies prior to reinstalling the belly
panel fairings.
WARNING: THE WARNING TAG AND SAFETY PIN ON THE FLOAT RESERVOIRS MUST 
BE REMOVED PRIOR TO REINSTALLATION OF THE FAIRINGS. 
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT 
REOPENING THE DUAL CABLE PLATE TO RE-VERIFY RIGGING WITH THE 
PULL CABLE TEST TOOL. FAILURE TO DO SO MAY RESULT IN A FAILURE 
OF THE SYSTEM.

### Page 15

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 15 of 24 
 
Figure 9: Float Hose Attachment at Reservoir 
Find Number Part Number Description Qty 
5 602.1606 Hose  2 
 
Figure 10: Shear Rivet to Cyclic 
Table 8: Parts List for Figure 10 
Find Number Part Number Description Qty 
11 614.2302 Handle Assembly Ref 
 MS20470A2-12 Shear Rivet 1

### Page 16

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 16 of 24 
2.1.4 LIFERAFT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY. THE 
SAFETY PIN SHOULD ONLY BE REMOVED PRIOR TO REINSTALLATION OF THE 
BELLY PANEL. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR 
DEATH. 
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL 
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED 
FOR ATTACHMENT. 
C. EYE PROTECTION IS RECOMMENDED. 
NOTE:  Pull Cable Test Tool P/N 606.7803 must be procured from DART prior to performing 
this procedure.  
1. Refer to DART document OIM-5 for test tool calibration. When completed, proceed to 
the next step.  
2. Refer to DART document OIM-11 for the procedure for reservoir rigging and testing 
using Pull Cable Test Tool, P/N 606.7803. 
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 606.7803, must be 
25 lbf (111.2 N) or less. 
NOTE:  The latest revisions of OIM-5 and OIM-11 should be obtained from the DART 
website at www.dartaerospace.com prior to performing the rigging procedure. 
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hose 
(F/N 60) to the valve. (Figure 11) 
4. Carefully remove the safety pin from the liferaft reservoir assembly prior to reinstalling 
the fairing.  
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT RE-
VERIFY RIGGING WITH THE PULL CABLE TEST TOOL. FAILURE TO DO SO 
MAY RESULT IN A FAILURE OF THE SYSTEM.

### Page 17

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 17 of 24 
 
Figure 11: Liferaft Hose Attachment at Reservoir 
Find Number Part Number Description Qty 
60 602.1609 Hose 1

### Page 18

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 18 of 24 
2.2 EC130B4 KIT P/N 604.0018-100 AND P/N 604.0018-300 
2.2.1 GENERAL 
WARNING:  ENSURE THAT THE SAFETY PINS ARE INSTALLED IN THE RESERVOIR 
ASSEMBLIES. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR 
ASSEMBLIES UNTIL THE INSTALLATION IS COMPLETE. 
WARNING:  AFTER DISCONNECTING THE HOSE FROM THE VALVE, IMMEDIATELY 
PLACE DIFFUSER CAP, P/N 601.1674, ON THE VALVE OUTLET PORT. 
1. Disconnect the reservoir feed hoses from their respective valve assemblies and 
immediately attach a diffuser cap on the outlet ports of each valve assembly. 
2. Remove the cotter pins (F/N F) and the clevis pins (F/N G) from the valve assemblies.  
3. Verify pull cable rigging at the dual cable plate per Section 2.1.2. 
4. Verify pull cable forces for the float system per Section 2.2.2. 
5. Verify pull cable forces for the liferaft system, if installed: 
A. Per Section 2.1.4 if P/N 645.5902-270-216-08 valve assembly is installed.  
B. Per Section 2.2.3 if P/N 634.1301 valve assembly is installed. 
6. If pull forces are acceptable, reattach the pull cables and the hoses to the reservoir 
assemblies per ICA130-1 Rev M and later and ICA130-2 Rev H and later as applicable. 
7. If pull forces are not acceptable, contact Dart Customer Support. 
8. If INOPPING the system is desirable, proceed to Appendix A.

### Page 19

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 19 of 24 
2.2.2 FLOAT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY UNTIL 
THE INSTALLATION IS COMPLETE. 
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL 
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED 
FOR ATTACHMENT. 
C. EYE PROTECTION IS RECOMMENDED. 
NOTE:  Pull Cable Test Tool P/N 607.1602 must be procured from Dart prior to performing 
this procedure. 
1. Refer to Dart document OIM-9 for test tool calibration. When completed, proceed to the 
next step.  
2. Refer to Dart document OIM-11 for the procedure for reservoir rigging and testing using 
Pull Cable Test Tool, P/N 607.1602. 
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 607.1602, must be 
25 lbf (111.2 N) or less. 
NOTE:  The latest revisions of OIM-9 and OIM-11 should be obtained from the Dart website 
at www.dartaerospace.com prior to performing the rigging procedure. 
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hoses 
(F/N 5) to the appropriate valve. (Figure 12) 
4. Install the warning tag onto the safety pin and place the safety pin into the handle.  
5. Install shear rivet into the small through hole on the inflation handle assembly (F/N 11). 
(Figure 13) 
6. Remove the safety pins from the float reservoir assemblies prior to reinstalling the belly 
panel fairings.  
WARNING: THE WARNING TAG AND SAFETY PIN ON THE FLOAT RESERVOIRS MUST 
BE REMOVED PRIOR TO REINSTALLATION OF THE FAIRINGS. 
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT 
REOPENING THE DUAL CABLE PLATE TO RE-VERIFY RIGGING WITH THE 
PULL CABLE TEST TOOL. FAILURE TO DO SO MAY RESULT IN A FAILURE 
OF THE SYSTEM.

### Page 20

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 20 of 24 
 
Figure 12: Float Hose Attachment at Reservoir 
Find Number Part Number Description Qty 
5 602.1606 Hose  2 
 
Figure 13: Shear Rivet to Cyclic 
Table 9: Parts List for Figure 13 
Find Number Part Number Description Qty 
11 614.2302 Handle Assembly Ref 
 MS20470A2-12 Shear Rivet 1

### Page 21

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 21 of 24 
2.2.3 LIFERAFT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY. THE 
SAFETY PIN SHOULD ONLY BE REMOVED PRIOR TO REINSTALLATION OF THE 
BELLY PANEL. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR 
DEATH. 
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL 
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED 
FOR ATTACHMENT. 
C. EYE PROTECTION IS RECOMMENDED. 
NOTE:  Pull Cable Test Tool P/N 607.1602 must be procured from DART prior to performing 
this procedure.  
1. Refer to DART document OIM-9 for test tool calibration. When completed, proceed to 
the next step.  
2. Refer to DART document OIM-11 for the procedure for reservoir rigging and testing 
using Pull Cable Test Tool, P/N 607.1602. 
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 607.1602, must be 
25 lbf (111.2 N) or less. 
NOTE:  The latest revisions of OIM-9 and OIM-11 should be obtained from the DART 
website at www.dartaerospace.com prior to performing the rigging procedure. 
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hose 
(F/N 60) to the valve. (Figure 14) 
4. Carefully remove the safety pin from the liferaft reservoir assembly prior to reinstalling 
the fairing.  
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT RE-
VERIFY RIGGING WITH THE PULL CABLE TEST TOOL. FAILURE TO DO SO 
MAY RESULT IN A FAILURE OF THE SYSTEM.

### Page 22

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 22 of 24 
 
Figure 14: Liferaft Hose Attachment at Reservoir 
Find Number Part Number Description Qty 
60 602.1609 Hose 1

### Page 23

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 23 of 24 
3.0 GENERAL 
1. Record compliance to this Service Bulletin in the aircraft logbook.  
2. Report aircraft Registration Numbers and Serial Numbers to DART Aerospace Customer 
Support at support@dartaero.com.  
Customer Aircraft Model Aircraft S/N Aircraft R/N Float System P/N Float System S/N

### Page 24

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2020-09 
REFERENCE DRAWING:  Rev. A 
604.0018  2021-MAR-16 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 24 of 24 
4.0 APPENDIX A 
1. INOP the Emergency Float System by replacing the “Remove Prior to Flight” warning tag 
with the P/N 604.5213 “Emergency Float System Inoperative” Warning Tag on the P/N 
601.0998 quick-release pin.  
2. Insert the modified quick-release pin into the float activation handle.  
3. Ty-wrap the pin into place on the pilot collective so that the Warning Tag is clearly visible but 
does not interfere with flight operations.  
The P/N 604.5213 “Emergency Float System Inoperative” Warning Tags can be obtained from 
DART. Contact DART Customer Service for a resolution on the issue.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
