# DART Aerospace Service Bulletin 2021-02

Copy: No revision named ("SB 2021-02"), 12 pages: PDF https://openairdocs.org/files/sha256/0f/a0/0fa0f27de3341c277750ae0fe7aee7a2a788d013abedcce07a7a40e02af441d3; text https://openairdocs.org/service-documents/dart-aerospace/sb-2021-02/file/0fa0f27de334.md. Rights: © DART Aerospace. Filed by the FAA in regulations.gov docket FAA-2024-1004; AD 2024-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [DART Aerospace](https://openairdocs.org/service-documents/dart-aerospace.md)
- Type: Service bulletin (Service Bulletin)
- Number: 2021-02
- Page: https://openairdocs.org/service-documents/dart-aerospace/sb-2021-02

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-20-07](https://openairdocs.org/ad/2024-20-07.md), effective Dec 5, 2024: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/dart-aerospace/sb-2021-02/proposed.md).

## Text (12 pages)

Rights: © DART Aerospace. Filed by the FAA in regulations.gov docket FAA-2024-1004; AD 2024-20-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

3030 Enterprise Court, Suite A, Vista, California 92081-8347 
PH: +1 760-724-5300 FAX: +1 760-509-1562 
www.dartaerospace.com 
 
 
COPYRIGHT  2021 BY APICAL INDUSTRIES, INC DBA DART AEROSPACE  
THIS DOCUMENT IS PRIVATE AND CONFIDENTIAL AND IS SUPPLIED ON THE EXPRESS CONDITION THAT IT IS NOT TO BE USED FOR ANY PURPOSE OR COPIED 
OR COMMUNICATED TO ANY OTHER PERSON WITHOUT WRITTEN PERMISSION FROM APICAL INDUSTRIES, INC. DBA DART AEROSPACE 
 
 
Service Bulletin 
Document Number: SB2021-02 
Date:  2021-APR-30 
Revision:  N/C 
Effective Model:  646.4100 Kit Series, BK117C-2 Emergency Floats with Liferafts and 
BK117C-2 Emergency Floats 
651.3400 Kit Series, BK117D-2 Emergency Floats with Liferafts and 
BK117D-2 Emergency Floats  
(STC SR02244LA) 
Aircraft Kit S/Ns DART Kit P/N Description 
BK117C-2/D-2 VT212287 and previous 
All 646.4100 Kits 
BK117C-2 Emergency 
Float with Liferaft Kit and 
BK117C-2 Emergency 
Float Kit 
All 651.3400 Kits 
BK117D-2 Emergency 
Float and Liferaft Kit and 
BK117D-2 Emergency 
Float Kit 
 
NOTE: This Service Bulletin is sent to the operators of record for the model aircraft as 
shown above. If an aircraft has been leased or sold, send this service bulletin to the 
new operator. 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 2

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 2 of 12 
LOG OF REVISIONS 
Rev Date Pages Description Approval 
N/C 2021-APR-30 All Initial Release J. Gardiner 
' UART 
AEROSPACE 
L..,..________,________,L.___I _______.__I __ _________.___---=i -
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 3

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 3 of 12 
SAFETY SUMMARY 
GENERAL PRECAUTIONS 
Personal Protective Equipment (PPE) shall be worn when exposed to flying particles, liquid 
chemicals, or other potential hazards to the skin, eyes, ears, or respiratory system. 
Ensure that the work area is free from dirt and foreign matter and that the valve is protected 
from environmental hazards and contaminants that could otherwise damage its function. 
Failure to comply with or deviate from the procedure may negatively affect the equipment. It is 
the operator’s responsibility to comply with these procedures. 
 
DEFINITIONS 
The following precaution definitions are used to indicate the seriousness of the hazard or 
conditions. All of the following may refer to a maintenance procedure, practice, condition, etc. 
WARNING: THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, COULD 
RESULT IN PERSONAL INJURY, DEATH, OR LONG-TERM HEALTH 
CONDITIONS. 
CAUTION: THIS INDICATES INFORMATION THAT, IF NOT FOLLOWED, MAY RESULT 
IN DAMAGE TO OR DESTRUCTION OF EQUIPMENT, OR THE LOSS OF 
MISSION EFFECTIVENESS. 
NOTE: This indicates information that aids in understanding or provides additional detail on 
the methods of a procedure. 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 4

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 4 of 12 
1.0 INTRODUCTION 
1.1 SUBJECT 
A system check is required on all DART pull cables that are used to activate float and liferaft 
inflation reservoirs. 
1.2 BACKGROUND 
DART has developed a P/N 606.7803 Pull Cable Test Tool to replicate the loads that are 
required to activate the float and liferaft inflation reservoirs used in the 646.4100 and 651.3400 
Series Emergency Floats and Emergency Floats with Liferaft for the BK117C-2/D-2 model 
aircraft. 
1.3 ACTION 
This SB provides instructions on how to perform a check of the pull cable rigging using the Pull 
Cable Test Tool and a guide to make rigging changes to ensure proper activation of the 
float/liferaft reservoirs.   
1.4 COMPLIANCE 
This SB is MANDATORY. End user must comply with this SB by the next 100 Hr. inspection or 
within 6 months of receipt of this SB, whichever comes first. 
1.5 MANPOWER 
Maintenance-man-hours are based on hands-on time and can differ by facility based upon the 
availability of qualified personnel. The estimated time to complete this SB is one man-hour for 
test and up to 8 man-hours for cable replacement and adjustment. 
1.6 WEIGHT AND BALANCE 
Incorporating this SB has no effect on the A/C weight and balance. 
1.7 PUBLICATIONS AFFECTED 
No publications are affected.  
1.8 APPROVAL 
The modifications described in the Accomplishment Instructions have been shown to comply 
with applicable Federal Aviation Regulations. 
1.9 REFERENCES  
1. OIM-5 Operational Instruction Manual for Pull Cable Test Tool (P/N 606.7803) 
2. OIM-11 Operation Instruction Manual for General Pull Cable Rigging and Testing Procedure 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 5

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 5 of 12 
2.0 ACCOMPLISHMENT INSTRUCTIONS 
2.1 GENERAL 
WARNING:  ENSURE THAT THE SAFETY PINS ARE INSTALLED IN THE RESERVOIR 
ASSEMBLIES. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR 
ASSEMBLIES UNTIL THE INSTALLATION IS COMPLETE. 
WARNING:  AFTER DISCONNECTING THE HOSE FROM THE VALVE, IMMEDIATELY 
PLACE DIFFUSER CAP, P/N 601.1674, ON THE VALVE OUTLET PORT. 
1. Disconnect the reservoir feed hose from the valve assembly and immediately attach a 
diffuser cap on the outlet ports of the valve assembly. 
2. Remove the cotter pin (F/N 47) from each reservoir shroud. (Figure 1) 
3. Thread a nut (F/N F), then a swivel locknut (F/N B) away from the shroud (F/N C). (Figure 2) 
4. Remove the cable rod (F/N A) from the pull rod (F/N D) and remove the pull cable assembly 
from the valve. (Figure 2) 
NOTE:  In order to test the pull forces of the system, a full emergency float kit or full 
emergency float with liferaft kit will need to be installed or the fixed provisions with 
removable provisions will need to be installed. 
5. Verify pull cable forces for the float system per Section 2.2. 
6. Verify pull cable forces for the liferaft system (if applicable) per Section 2.3. 
7. If pull forces are acceptable, reattach the pull cables and the hoses to the reservoir 
assemblies per ICA145-1 Rev N and later or ICA145-4 Rev E and later as applicable. 
8. If optimal pull forces cannot be achieved, contact Dart Customer Support. 
9. If INOPPING the system is desirable, proceed to Appendix A. 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 6

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 6 of 12 
 
Figure 1: Cable Rigging Detail 
 
Figure 2: Pull Cable Installation 
Table 1: Parts List for Figure 1 and Figure 2 
F/N P/N Description QTY 
A 645.7810 Cable Rod REF 
B 645.7110 Swivel Locknut REF 
C 645.7710 Shroud REF 
D REF Pull Rod REF 
E 645.7910 Cable Housing REF 
F 601.2933 Nut (NAS509-6C) REF 
47 601.0718 Cotter Pin (MS24665-151) 2 
A 
B C 
E 
D 
F 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 7

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 7 of 12 
2.2 FLOAT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY. THE 
SAFETY PIN SHOULD ONLY BE REMOVED PRIOR TO FLIGHT. FAILURE TO DO 
SO MAY RESULT IN SERIOUS INJURY OR DEATH. 
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL 
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED 
FOR ATTACHMENT. 
C. EYE PROTECTION IS RECOMMENDED. 
NOTE:  Pull Cable Test Tool P/N 606.7803 must be procured from DART prior to performing 
this procedure.  
1. Refer to DART document OIM-5 for test tool calibration. When completed, proceed to the 
next step.  
2. Refer to DART document OIM-11 for the procedure for reservoir rigging and testing using 
Pull Cable Test Tool, P/N 606.7803. 
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 606.7803, must be 
25 lbf (111.2 N) or less. 
NOTE:  The latest revisions of OIM-5 and OIM-11 should be obtained from the DART 
website at www.dartaerospace.com prior to performing the rigging procedure.  
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hoses (F/N 
9) to the appropriate valve (Figure 3).  
4. Insert shear rivet into the small through hole on the inflation handle assembly and rivet in 
place (Figure 4). 
5. Insert safety pin into the through hole on the inflation handle assembly (F/N 43) (Figure 4). 
6. 646.4104 Kit Only: Attach the Linear Actuator Box Cover once general pull cable rigging and 
testing procedures have been completed. 
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT RE-
VERIFY RIGGING. FAILURE TO DO SO MAY RESULT IN A FAILURE OF THE 
SYSTEM. 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 8

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 8 of 12 
 
Figure 3: Float Hose Installation 
 
Figure 4: Shear Rivet to Cyclic 
' UART 
SHEAR RIVET 
HOLE 
SAFETY PIN 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 9

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 9 of 12 
2.3 LIFERAFT RESERVOIR RIGGING 
WARNINGS: 
A. DO NOT REMOVE THE SAFETY PIN FROM THE RESERVOIR ASSEMBLY. THE 
SAFETY PIN SHOULD ONLY BE REMOVED PRIOR TO REINSTALLATION OF THE 
FAIRINGS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. 
B. DO NOT REMOVE THE DIFFUSER CAP FROM THE RESERVOIR ASSEMBLY UNTIL 
THE RESERVOIR HAS BEEN SECURED TO THE AIRCRAFT AND HOSES READIED 
FOR ATTACHMENT. 
C. TWO PEOPLE SHOULD BE USED WHEN INSTALLING THE RESERVOIR 
ASSEMBLY. 
D. EYE PROTECTION IS RECOMMENDED. 
NOTE:  Pull Cable Test Tool P/N 606.7803 must be procured from DART prior to performing 
this procedure.  
1. Refer to DART document OIM-5 for test tool calibration. When completed, proceed to the 
next step.  
2. Refer to DART document OIM-11 for the procedure for reservoir rigging and testing using 
Pull Cable Test Tool, P/N 606.7803. 
NOTE: The maximum load measured using the Pull Cable Test Tool, P/N 606.7803, must be 
25 lbf (111.2 N) or less. 
NOTE:  The latest revisions of OIM-5 and OIM-11 should be obtained from the DART 
website at www.dartaerospace.com prior to performing the rigging procedure.  
3. Remove the diffuser cap from the valve on the reservoir assembly and attach the hose (F/N 
18) to the appropriate valve (Figure 5). 
4. Verify that the Lever Arm in the Multi-Cable Box is returned to its original position. 
WARNING:  IF THE LEVER ARM IS NOT IN THE ORIGINAL POSITION AND NEEDS TO 
BE REPOSITIONED AFTER TESTING IS COMPLETE, REVERIFICATION OF 
THE SYSTEM WILL NEED TO BE COMPLETED. FAILURE TO DO SO COULD 
RESULT IN A FAILURE OF THE SYSTEM. 
5. Install the Multi-Cable Box Cover on to the Multi-Cable Box with the provided four screws. 
WARNING: ONCE RIGGED, DO NOT MOVE OR ADJUST THE ROUTING OF THE PULL 
CABLES, OR THE RIGGING AT THE VALVE OR HANDLE WITHOUT 
REOPENING THE MULTI-CABLE BOX TO RE-VERIFY RIGGING WITH THE 
PULL CABLE TEST TOOL. FAILURE TO DO SO MAY RESULT IN A FAILURE 
OF THE SYSTEM. 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 10

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 10 of 12 
 
Figure 5: Liferaft Hose Installation 
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 11

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 11 of 12 
3.0 GENERAL 
1. Record compliance to this Service Bulletin in the aircraft logbook.  
2. Report aircraft Registration Numbers and Serial Numbers to DART Aerospace Customer 
Support at support@dartaero.com.  
Customer Aircraft Model Aircraft S/N Aircraft R/N Float System P/N Float System S/N 
      
      
      
      
      
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

### Page 12

SUBJECT:  DOCUMENT NO: 
SERVICE BULLETIN  SB2021-02 
REFERENCE DRAWING:  Rev. N/C 
646.4100  2021-APR-30 
651.3400 
 
Copyright 2021 Apical Industries, Inc. dba DART Aerospace  See the Non-Disclosure Notice on the cover page. 
All Rights Reserved  Page 12 of 12 
4.0 APPENDIX A 
1. INOP the Emergency Float System by replacing the “Remove Prior to Flight” warning tag 
with the P/N 604.5213 “Emergency Float System Inoperative” Warning Tag on the P/N 
601.0998 quick-release pin.  
2. Insert the modified quick-release pin into the float activation handle.  
3. Ty-wrap the pin into place on the pilot collective so that the Warning Tag is clearly visible but 
does not interfere with flight operations.  
The P/N 604.5213 “Emergency Float System Inoperative” Warning Tags can be obtained from 
DART. Contact DART Customer Service for a resolution on the issue.  
' UART 
AEROSPACE 
PRINTED COPY OF THIS DOCUMENT IS FOR REFERENCE ONLY AND IS UNCONTROLLED
Released on 6/15/2021

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
