# DG Flugzeugbau Technical Note 500/05

Copy: No revision named ("U.S. DOT/FAA - Service Information - 2"), 2 pages: PDF https://openairdocs.org/files/sha256/2b/4e/2b4e01c3e020d4518d4c95c066e74479882e89924bf2500a3a9db9ddb3af7200; text https://openairdocs.org/service-documents/dg-flugzeugbau/tn-500-05/file/2b4e01c3e020.md. Rights: © DG Flugzeugbau. Filed by the FAA in regulations.gov docket FAA-2011-1342; AD 2012-06-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [DG Flugzeugbau](https://openairdocs.org/service-documents/dg-flugzeugbau.md)
- Type: Other document (Technical Note)
- Number: 500/05
- Page: https://openairdocs.org/service-documents/dg-flugzeugbau/tn-500-05

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2012-06-15](https://openairdocs.org/ad/2012-06-15.md), effective May 15, 2012: No revision named

## Text (2 pages)

Rights: © DG Flugzeugbau. Filed by the FAA in regulations.gov docket FAA-2011-1342; AD 2012-06-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

DG Flugzeugbau GmbH  Technical note  page 1 from 2
76646 Bruchsal  No. 500/05
Subject  : Installing the headrest securing ropes in the rear cockpit
Manual revision
Effectivity  : Type: DG-500, all variants (sailplanes and powered sailplanes)
Instructions 2 and 3: only if a headrest is installed in the rear cockpit
Accomplishment  Instructions 1: Mandatory prior to the next annual inspection, latest December 31.
2011.
Instruction 2: Mandatory prior to the next flight if a headrest is installed in the rear
cockpit.
Instruction 3: Mandatory latest December 31. 2011 if a headrest is installed in the
rear cockpit.
Reason  : 1. The headrest in the rear cockpit (option) is secured with ropes to prevent it from
rotating so far forward that it can block the backwards movement of the control
stick. Unfortunately we've been informed about operators who have
disassembled the securing ropes from the lift pin tube for glider service work
and reinstalled them incorrectly overlength. To eliminate this possibility of
error a solution enabling fast disconnection and reconnection of the ropes
2. Check items and servicing the wheel brake in maintenance manual section 2
have been updated due to latest operating experience. Min. thickness for wheel
brake linings and wheel brake disc.
Instructions  1. Exchange the following manual pages against new pages issued September
2011 marked with TN500/03. Take note of the changes marked in the right
hand margin.
DG-500 (all sailplane variant):
Maintenance manual DG-500 initial issue December 2009: 0.1, 0.3, 0.4, 0.7,
1.11, 2.1, 2.3, 2.4, 4.5, 4.6, file working instruction No. 1 for TN348/20 issue 3
at the end of the MM.
DG-500M
Maintenance manual DG-500M initial issue December 2009: 0.1, 0.3, 0.4, 0.6,
0.9, 2.1, 2.3, 2.6, 2.8,, 2.9, 4.5, 4.6, file working instruction No. 1 for
TN348/20 issue 3 at the end of the MM.
DG-500MB:
Maintenance manual DG-500MB: 1 ÷ 4, 37, 38, 40 ÷ 42, 57, 58, file working
instruction No. 1 for TN348/20 issue 3 at the end of the MM.
2. Check the headrest securing ropes in the rear cockpit for wear and correct
length. The headrest must not interfere with the control stick when flapped
forward. The length of the ropes shall not exceed 450 mm (17.7 in.) when
stretched. There must be a separate cable at cach side of the headrest. If any one
of these items isn't complied with instruction 3 must be performed prior to the
3. Installation of the headrest securing ropes in the rear cockpit according to
working instruction No. 1 for TN348/20 (if a headrest is installed and if
instruction 2 of TN348/20 resp. IN843/28 wasn't performed already).
Material  : 1. Manual pages see instruction 1.
2. Working instruction No. 1 for TN348/20 issue 3, further material see material
list in the working instruction.

### Page 2 (OCR)

DG Flugzeugbau GmbH  Technical note  page 2 from 2
76646 Bruchsal  No. 500/05
Weight and balance  : influence negligible
Remarks  Instructions No. 1+2 may be executed by the pilot/owner himself and are to be
inspected and entered in the aircraft logs by a licensed inspector at latest with the
next annual inspection.
Instructions no. 3:
1. EASA countries: The actions have to be performed in a Part -145 approved
organisation, or in a Part M, Subpart F approved organisation according to the
regulations of the Part M and released according to M.A.801.
2. Non EASA countries: The actions have to be performed in a licensed
workshop. All instructions are to be inspected and entered in the aircraft logs
by a licensed inspector.
When retrofitting a headrest in the rear cockpit according to TN348/5 resp. 843/6
the installation of the securing ropes must be accomplished according to working
instruction No. 1 for TN348/20.
As the initial maintenance manuals of all DG-500 sailplane variants and of the DG-
500M will no longer be updated it is mandatory to use the maintenance manuals see
instruction 1 to maintain the aircraft after this TN has been performed.
Bruchsal, date:
September 19. 2011
Author:  Modifications approved by EASA Date: 30.September2011
Dipl. Ing. Wilhelm Dirks  with Airworthiness directive AD No.: 2011-0191.
Wilhelm D

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
