# Diamond Aircraft Mandatory Service Bulletin 40NG-018/1: No revision named

- Rights: © Diamond Aircraft. Filed by the FAA in regulations.gov docket FAA-2013-0348; AD 2013-08-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Diamond Aircraft Mandatory Service Bulletin 40NG-018/1](https://openairdocs.org/service-documents/diamond/40ng-018-1.md)
- Title as filed: U.S. DOT/FAA - MSB 40NG-018-1
- Pages: 4
- PDF: https://openairdocs.org/files/sha256/ff/55/ff5591d1cc3a0e314070780e18534a0133ddedafbcd81273b76d1db466329f05
- Page: https://openairdocs.org/service-documents/diamond/40ng-018-1/file/ff5591d1cc3a

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Diamond  Diamond Aircraft Industries GmbH  DAI MSB 40NG-018/1
AIRCRAFT  N. A. Otto-Straße 5  Page 1 of 4
A-2700 Wiener Neustadt  26-Nov-2012
Austria
MANDATORY SERVICE BULLETIN
MSB 40NG-018/1
SUPERSEDES MSB 40NG-018
TECHNICAL DETAILS
L.1  Category
Mandatory.
1.2  Airplanes affected
Type:  DA 40 NG
Serial numbers:  40.N001 through 40.N084
Airplanes converted to DA 40 NG with WI-OSB 40-080 up to Rev. 6.
NOTE  Airplanes originally modified with RSB 40NG-011 are also affected.
1.3  Date of effectivity
22-Nov-2012
1.4  Time of Compliance
Action 1: Within the next 50 flight hours or at next maintenance action whichever occurs first
and every 50 flight hours thereafter until Action 2 is carried out.
Action 2: Within the next 200 flight hours or 12 month from the date of effectivity which ever
occurs first.
1.5  Subject
Exchange of charged air tubing.
ATA-Code:  81-00
I.6  Reason
Leakages of the charge air tubing due to improper installation and maintenance as well as
chafing of aluminum tubing on the firewall because of small clearances making the
installation critical required a new design providing more clearance. This service bulletin
describes the retrofit installation of the new design.
1.7 Concurrent Documents
None.
1.8  Approval
The technical information or instructions contained in this document relate to the Design
Change Advisory No. MAM 40-630, which has been approved under the authority of EASA
Design Organization Approval ref. EASA.21J.052.

### Page 2 (OCR)

Diamond  Diamond Aircraft Industries GmbH  DAI MSB 40NG-018/1
AIRCRAFT  N. A. Otto-Straße 5  Page 2 of 4
A-2700 Wiener Neustadt  26-Nov-2012
Austria
The technical content of this document has been approved under the authority of DOA ref.
EASA.21J.052.
1.9  Accomplishments / Instructions
Action 1: Inspection
Inspect of the charge air tubing from the turbo charger to the intercooler:
Look especially for marks of chafing. No chafing marks allowed.
If chafing marks are detected either replace parts per AMM or comply with Action 2.
Action 2: Installation of new charge air tubing:
Comply with WI-MSB 40NG-018, latest effective issue.
1.10 Mass (Weight) and CG
The change in mass and CG is negligible.
PLANNING INFORMATION
II.1 Material and Availability
See WI-MSB 40NG-018, latest effective issue.
1I.2 Special Tools
None.
I.3 Labour Effort
Approx. 1.5 hours.
II.4  Credit
For airplanes in warranty:
• Action1: None for inspection only. In case of findings, replacement parts may be
ordered free of charge.
• Action 2: Material as listed in WI-MSB 40-018 and 1.5 hours of labour.
11.5 Reference Documents
DA 40 NG Airplane Maintenance Manual, Doc. No. 6.02.15, latest effective issue.

### Page 3 (OCR)

Diamond  Diamond Aircraft Industries GmbH  DAI MSB 40NG-018/1
AIRCRAFT  N. A. Otto-Straße 5  Page 3 of 4
A-2700 Wiener Neustadt  26-Nov-2012
Austria
REMARKS
1.  All work must be done by a certified aircraft service station or a certified aircraft
maintenance mechanic.
2. All work, particular those that are not especially described in this Service Bulletin, must
be done in accordance with the referenced Maintenance Manual.
3. Completion of all work must be recorded in the log book.
4.  If material and/or labor hours are subject to be credited through Diamond Aircraft
Industries, the Service Bulletin must be carried out by an authorized Diamond Service
Center and the Warranty Application incl. Work Report must be sent not later than 30
days after the end of time of compliance.
In case of doubt contact Diamond Aircraft Industries GmbH.

### Page 4 (OCR)

Diamond  Diamond Aircraft Industries GmbH  DAI MSB 40NG-018/1
AIRCRAFT  A-2700 Wiener Neustadt  N. A. Otto-Straße 5  26-Nov-2012  Page 4 of 4
Austria
EXECUTION REPORT TO
SERVICE BULLETIN
MSB 40NG-018/1
AIRPLANE DATA
Airplane Serial Number:
Airplane Registration:
Airplane Operator:
Hours of operation of airplane:
No. of landings:
Hours of operation-engine
Typical operation of airplane:  private, club, training, other
Date, Name, Sign
Please fax the completed form to Fax No. +43-2622-26700-1369 or e-mail to
airworthiness@diamond-air.at

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
