# Diamond Aircraft Mandatory Service Bulletin 40NG-064: Diamond Aircraft Industries Work Instruction WI-MSB 40NG-064 Rev 0

- Rights: © Diamond Aircraft. Filed by the FAA in regulations.gov docket FAA-2025-5397; AD 2026-06-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Diamond Aircraft Mandatory Service Bulletin 40NG-064](https://openairdocs.org/service-documents/diamond/40ng-064.md)
- Title as filed: Diamond Aircraft Industries Work Instruction WI-MSB 40NG-064 Rev 0
- Pages: 4
- PDF: https://openairdocs.org/files/sha256/a4/87/a48724cd5f315058e536dca3fe0766adeacc296a936fbbb1f17bdd8e9bd42296
- Page: https://openairdocs.org/service-documents/diamond/40ng-064/file/a48724cd5f31

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Diamond Aircraft Industries  WORK INSTRUCTION  my Diamond  AIRCRAFT*
Model DA 40 NG
WORK INSTRUCTION WI-MSB 40NG-064 REV. 0
GENERAL INFORMATION
L1  Subject
Replacement of fuel tank connection hoses (flexible couplings).
1.2  Reference Documents
DA 40 NG series Airplane Maintenance Manual, Doc. No. 6.02.15, latest effective issue.
1.3  Remarks
1. All work must be done by a certified aircraft service station or a certified aircraft maintenance
mechanic.
2. All work, in particular if not described in this work instruction, must be done in accordance with
the referenced maintenance manual.
3. For conversion factors between SI units and US/Imperial units, refer to AMM Chapter 02.
4. In case of doubt, contact Diamond Aircraft Industries Inc.
DRAWINGS, SPECIAL TOOLS & MATERIALS
II.1 Drawings
None.
11.2 Special Tools
None.
I.З  Material
Qty  Part Number  Description
2  D4D-2817-10-70_01  Fuel tank connection hose (flexible coupling) for DA 40 NG
D4D-9028-07-02  Check valve filter in fuel transfer line
WI-MSB 40NG-064 Rev. 0  © DAI 2019 ALL RIGHTS RESERVED, PROPRIETARY DOCUMENT  Internet: www.diamondair.com
Page 1 of 4  Email: Techpubs@diamondair.com
01 July 2019

### Page 2 (OCR)

Diamond Aircraft Industries  Diamond
WORK INSTRUCTION  AIRCRAFT*
Model DA 40 NG
INSTRUCTIONS
NOTE: the following images show the difference between the two types of fuel tank connection
hoses (flexible couplings) in the field.
• D4D-2817-10-70, this fuel tank connection hose has a light blue layer in the cross-section. Only
a fraction of these hoses come from the affected two batches.
D4D-2817-10-70
D4D-2817-10-70_01, this fuel tank connection hose has an all black cross section and is not
affected.
D4D-2817-10-70_01
not affected
WI-MSB 40NG-064 Rev. 0  © DAI 2019 ALL RIGHTS RESERVED, PROPRIETARY DOCUMENT
Internet: www.diamondair.com
Page 2 of 4  Email: Techpubs@diamondair.com
01 July 2019

### Page 3 (OCR)

Diamond Aircraft Industries  Diamond
WORK INSTRUCTION  AIRCRAFT*
Model DA 40 NG
I.1 Replacement of Main Fuel Tank Connection Hoses
1. Remove the main fuel tank assembly from the aircraft in accordance with AMM Chapter 28-10.
2. Disassemble the main fuel tank assembly in accordance with AMM Chapter 28-10.
3. Examine the fuel tank connection hoses for damage, deterioration, and detached rubber parts.
4. If the fuel tank connection hoses are found to be damaged, inspect the fuel tank chambers, and
remove detached rubber material in accordance with Section III.2 of this service bulletin.
5. Assemble the main fuel tank assembly with the new fuel tank connection hoses (P/N D4D-2817-
10-70_01) in accordance with AMM Chapter 28-10.
6. Install the main fuel tank assembly in to the aircraft in accordance with AMM Chapter 28-10.
7. Do steps 1 to 6 on the opposite side of the aircraft.
8. Clean working areas, and check for foreign objects.
9. Check all altered, replaced, repaired parts for proper function.
10. Test all systems in working area for proper function.
11. Make all necessary entries in the airplane logs.
12. Fill in the execution report, and send it to Techpubs@diamondair.com.
I.2 Inspection of Main Fuel Tank Chambers and Removal of Detached Rubber Parts
1. Examine all fuel tank chambers for detached rubber material. Remove any detached rubber
material from the fuel tank chambers.
CAUTION: pay increased attention to areas with limited access of the inner chamber of the main fuel
tank, especially the, area in the fuel trap and the area underneath the fuel trap (sediment trap &
drain).
NOTE: to improve access and inspectability of these areas, the fuel low level switch, the fuel
temperature sensor, and the fuel finger filter can be removed.
NOTE: optionally, use a borescope to inspect areas with limited access.
2. If removed during examination of the fuel tank chambers for detached rubber particles:
A. Install the fuel low level switch.
B. Install the fuel temperature sensor.
C. Install the fuel finger filter.
3. Remove, clean, and re-install the fuel gascolator filter in accordance with AMM Chapter 28-20.
WI-MSB 40NG-064 Rev. 0  © DAI 2019 ALL RIGHTS RESERVED, PROPRIETARY DOCUMENT  Internet: www.diamondair.com
Page 3 of 4  Email: Techpubs@diamondair.com
01 July 2019

### Page 4 (OCR)

Diamond Aircraft Industries  i Diamond
WORK INSTRUCTION  AIRCRAFT*
Model DA 40 NG
4. Remove and inspect the check valve filter in the fuel transfer line. If the check valve filter is found
to be contaminated, replace the check valve.
CAUTION: do not disassemble the fuel transfer check valve. Inspect visually.
5. Flush all fuel lines connecting the main fuel tanks to the gascolator with clean fuel.
WI-MSB 40NG-064 Rev. 0  © DAI 2019 ALL RIGHTS RESERVED, PROPRIETARY DOCUMENT
Internet: www.diamondair.com
Page 4 of 4  Email: Techpubs@diamondair.com
01 July 2019

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
