# Diamond Aircraft Mandatory Service Bulletin 42NG-077: No revision named

- Rights: © Diamond Aircraft. Filed by the FAA in regulations.gov docket FAA-2019-0203, the docket of AD 2019-14-11. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Diamond Aircraft Mandatory Service Bulletin 42NG-077](https://openairdocs.org/service-documents/diamond/42ng-077.md)
- Title as filed: WI-MSB 42NG 077
- Pages: 3
- PDF: https://openairdocs.org/files/sha256/ac/d3/acd3c387c5efd3f40927a2c65fb47b0c2e475583a820f38317397331078013f1
- Page: https://openairdocs.org/service-documents/diamond/42ng-077/file/acd3c387c5ef

## Text

This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

Diamond  Diamond Aircraft Industries GmbH  WI-MSB 42NG-077
AIRCRAFT  Nikolaus-August-Otto-Straße 5  Revision O
2700 Wiener Neustadt, Austria  Page 1 of 3
20-Aug-2018
WORK INSTRUCTION
WI-MSB 42NG-077
GENERAL INFORMATION
Subject
Removal of pilot gust lock mounts from rudder pedals on pilot side.
1.2 Reference Documents
issue.  Diamond Aircraft DA 42 NG Airplane Maintenance Manual, Doc. No. 7.02.15, latest effective
1.3  Remarks
a) All work must be done by a certified aircraft service station or a certified aircraft
maintenance mechanic.
b) All work, in particular if not described in this work instruction, must be done in accordance
with the referenced maintenance manual.
c) For conversion factors between SI units and US/Imperial units refer to AMM Chapter 02.
d) In case of doubt, contact Diamond Aircraft Industries GmbH.
II DRAWINGS, SPECIAL TOOLS & MATERIALS
l.1 Drawings
None.
11.2 Special Tools
None.

### Page 2 (OCR)

Diamond  Diamond Aircraft Industries GmbH  WI-MSB 42NG-077
AIRCRAFT  Nikolaus-August-Otto-Straße 5  Revision 0
2700 Wiener Neustadt, Austria  Page 2 of 3
20-Aug-2018
I1.3  Material
Quantity  Part Number  Description
2  MS 171532  Pin-Spring
Material is available from Diamond Aircraft Industries.
III INSTRUCTIONS
1  Position the pilot electrical or mechanical rudder pedal full rearward.
2  Remove the spring pin from the LH and RH Pilot rudder pedal with a 3mm punch with a
centering pin (see picture 1). Make sure that the spring pin does not collide with the
Picture 1

### Page 3 (OCR)

›Diamond  Diamond Aircraft Industries GmbH  WI-MSB 42NG-077
AIRCRAFT  Nikolaus-August-Otto-Straße 5  Revision 0
2700 Wiener Neustadt, Austria  Page 3 of 3
20-Aug-2018
Picture 2
Remove the gust lock mounts from the rudder pedals.
4  Install the new spring pins into the LH and RH Pilot rudder pedal.
5  Prepare the gust lock belt i.a.w. picture 3 for use on the Co-Pilot rudder pedals.
Note: the gust lock mounts on the Co-Pilot rudder pedals are already installed. Refer also
to the Airplane Flight Manual Temporary Revision TR-MAM 42-1097.
REMOVE BEFORE FLIGHT
70cm (27.56in) Band length
6  Incorporate TR-MAM 42-1097 into the Airplane Flight Manual according to instructions
given on the cover sheet of the TR-MAM 42-1097.
7  Make all necessary entries in the airplane logs.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
