# Diamond Aircraft Mandatory Service Bulletin 42-095: No revision named

- Rights: © Diamond Aircraft. Filed by the FAA in regulations.gov docket FAA-2012-1148; AD 2013-07-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Diamond Aircraft Mandatory Service Bulletin 42-095](https://openairdocs.org/service-documents/diamond/sb-42-095.md)
- Title as filed: MSB42-095-M-r0-Exchange-of-MLG-Damper-Nut-Complete
- Pages: 9
- PDF: https://openairdocs.org/files/sha256/71/d6/71d66dcff07fe43fa08c40d5c3dc9f1bdc66ea19a505cf1c10e1f73968695b64
- Page: https://openairdocs.org/service-documents/diamond/sb-42-095/file/71d66dcff07f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
Austria 
DAI MSB 42-095 
DAI MSB 42NG-026 
Page 1 of 4 
11-Nov-2011 
 
MANDATORY SERVICE BULLETIN 
MSB 42-095 
MSB 42NG-026 
I TECHNICAL DETAILS 
I.1 Category 
Mandatory. 
I.2 Airplanes affected 
Type:   DA 42, DA 42 M, DA 42 NG, DA 42 M-NG 
Serial numbers: 42.004 through 42.321, 42.324 through 42.347, 
42.349, 42.351, 42.353 through 42.357,  
42.359 through 42.386, 42.388, 42.389, 42.391,  
42.394, 42.396, 42.399, 42.405 through 42.409,  
42.412 through 42.416, 42.427, 
42.AC001 through 42.AC152, 
42.M001 through 42.M011, 42.M015 through 42.M019, 
42.M021, 42.M022, 
42.N001 through 42.N011, 42.N013, 42.N018, 42.N019,  
42.N023 through 42.N028, 
42MN001 through 42.MN008 
provided that damper D60-3277-10-00_01 has NOT been installed 
on both MLG legs 
I.3 Date of effectivity 
11-Nov-2011 
I.4 Time of Compliance 
Within 200 flight hours, but not later than 31-Dec-2012. 
I.5 Subject 
Replacement of MLG damper nut. 
ATA-Code: 32-10 
I.6 Reason 
In one case the nut in the MLG damper has loosened itself during operation. This might lead 
to the MLG leg getting jammed in the gear bay. This Service Bulletin describes the work 
necessary to secure the nut in the MLG damper. 
Note: Diamond Aircraft Industries recommends doing RSB 42-089 / RSB 42NG-017. The 
measures prescribed by this service bulletin are included in RSB 42-089 / RSB 
42NG-017.

### Page 2

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
Austria 
DAI MSB 42-095 
DAI MSB 42NG-026 
Page 2 of 4 
11-Nov-2011 
 
I.7 Concurrent Documents 
None. 
I.8 Approval 
The technical information or instructions contained in this document relate to the Design 
Change Advisory No. MÄM 42-434, which has been approved under the authority of EASA 
Design Organization Approval ref. EASA.21J.052. 
The technical content of this document has been approved under the authority of DOA ref. 
EASA.21J.052. 
I.9 Accomplishments / Instructions 
If RSB 42-089 / RSB 42NG-017 has been done on both MLG dampers: 
Record MSB 42-095 / MSB 42NG-026 as performed. 
Note: Doing RSB 42-089 / RSB 42NG-017 on both MLG dampers is included in Work 
Instruction “Conversion to DA 42 NG / M-NG” Rev. 7 and later. 
If RSB 42-089 / RSB 42NG-017 has not been done on both MLG dampers: 
Comply with WI-MSB 42-095 / MSB 42NG-026, latest effective issue. 
Note: WI-MSB 42-095 / MSB 42NG-026 is attached to this document. 
Note: Diamond Aircraft Industries recommends to do RSB 42-089 / RSB 42NG-017 on 
both MLG dampers. The measures prescribed by this service bulletin are included 
in RSB 42-089 / RSB 42NG-017. 
I.10 Mass (Weight) and CG 
The change in mass and CG is negligible. 
II PLANNING INFORMATION 
II.1 Material and Availability 
See WI-MSB 42-095 / MSB 42NG-026, latest effective issue. 
Materials including drawings are available from Diamond Aircraft Industries. 
II.2 Special Tools 
None. 
II.3 Labour Effort 
Approx. 2 hours. 
II.4 Credit 
For all AC within warranty period: 
2 man hours of work. 
Material according to WI-MSB 42-095 / MSB 42NG-026, latest effective issue.

### Page 3

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
Austria 
DAI MSB 42-095 
DAI MSB 42NG-026 
Page 3 of 4 
11-Nov-2011 
 
II.5 Reference Documents 
Diamond Aircraft DA 42 Series Airplane Maintenance Manual, Doc. No. 7.01.01, latest 
effective issue. 
Diamond Aircraft DA 42 NG Airplane Maintenance Manual, Doc. No. 7.01.15, latest effective 
issue. 
III REMARKS 
1. All work must be done by a certified aircraft service station or a certified aircraft 
maintenance mechanic. 
2. All work, particular those that are no t especially described in this Service Bulletin, must 
be done in accordance with the referenced Maintenance Manual. 
3. Completion of all work must be recorded in the log book. 
4. If material and /or labor hours are subject to be credited through Diamond Aircraft 
Industries, the Service Bulletin must be carried out by an authorized Diamond Service 
Center and the Warranty Applicati on incl. Work Report must be sent not later than 30 
days after the end of time of compliance. 
5. In case of doubt contact Diamond Aircraft Industries GmbH.

### Page 4

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
Austria 
DAI MSB 42-095 
DAI MSB 42NG-026 
Page 4 of 4 
11-Nov-2011 
 
 
 
 
 
EXECUTION REPORT TO 
SERVICE BULLETIN 
MSB 42-095 
MSB 42NG-026 
 
 
AIRPLANE DATA 
Airplane Serial Number:          _________________ 
Airplane Registration:    _________________ 
Airplane Operator:    _________________ 
Hours of operation of airplane:  _________________ 
No. of landings:    _________________ 
Hours of operation-engine:  LH _________________ 
     RH _________________ 
Typical operation of airplane:       private, club, training, other ______________ 
 
 
 
 
 
__________________________________ 
Date, Name, Sign 
 
 
 
 
Please fax the completed form to Fax No. +43-2622-26700-1369 or e-mail to 
airworthiness@diamond-air.at

### Page 5

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
WI-MSB 42-095 
WI-MSB 42NG-026 
Revision 0 
Page 1 of 4 
11-Nov-2011 
 
WORK INSTRUCTION 
WI-MSB 42-095 / WI-MSB 42NG-026 
Replacement of self-locking nut in MLG damper 
I GENERAL INFORMATION 
I.1 Subject 
Replacement of nut in MLG damper 
I.2 Reference Documents 
Diamond Aircraft DA 42 Series Airplane Maintenance Manual, Doc. No. 7.02.01, latest 
effective issue. 
Diamond Aircraft  DA 42  NG Airplane Maintenance Manual, Doc. No. 7.02.15, latest 
effective issue. 
I.3 Remarks 
a) All work must be done by a certified aircraft service station or a certified aircraft 
maintenance mechanic.  
b) All work, particular those that are not especially described in this work instruction, 
must be done in accordance with the referenced maintenance manual. 
c) For conversion factors between SI and US/Imperial units refer to AMM Chapter 02. 
d) It is recommended to print this Work Instruction in color. 
e) In case of doubt, contact Diamond Aircraft Industries GmbH. 
 
II DRAWINGS, SPECIAL TOOLS & MATERIALS 
II.1 Drawings 
D60-3277-10-00_01 
II.2 Special Tools 
Spacer  X00-W027-00-00.02   Rev."-"

### Page 6

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
WI-MSB 42-095 
WI-MSB 42NG-026 
Revision 0 
Page 2 of 4 
11-Nov-2011 
 
II.3 Material 
Quantity Part No. Description 
2 ORAR00227-N7083 O-Ring  
2 MS 28775-010 O-Ring 
2 LN 9348-08 Hexagon nut 
2 LN 9348-06 Hexagon nut 
100ml 1U-9891 or equivalent Additiv 1U-9891 Caterpillar Inc. 
 
Materials including special tools are available from Diamond Aircraft Industries. 
II.4 Consumables  
Quantity Part No. Description 
Approx. 2 l 3627020L Aero Shell Fluid 41 
a. r. Royoco 81MS  Grease Royoco 81MS 
a. r. 135376 Loctite 262 
 
Consumables may be procured locally or from Diamond Aircraft Industries 
III INSTRUCTIONS 
1  Make sure AMM-TR-MÄM-42-368 and AMM-TR-MÄM-42-447 are incorporated into the AMM. 
2  Remove the LH Main Landing Gear Damper acc. to AMM section 32-10. 
3  
Release nitrogen and oil from the damper. 
 
WARNING: Do not spill Fluid 41 on your skin or on your clothes. Fluid 41 is         
harmful and can cause skin disease and damage to clothes. 
 
WARNING: Always wear safety glasses. The damper is gas loaded.   
 
 Install the adapter with drain hose onto the charging 
valve of the damper and release the pressure into 
the suitable container acc. to picture 1. 
 Wait until the nitrogen is fully released. 
 Push in the damper to minimum position to drain 
the oil. 
 
 
 
 
 
Picture 1 
 
4  Remove the charging valve from damper and install spacer.

### Page 7

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
WI-MSB 42-095 
WI-MSB 42NG-026 
Revision 0 
Page 3 of 4 
11-Nov-2011 
 
5  
Remove the bottom cap: 
 
 Remove the bolt holding the bottom cap. 
 Pull the bottom cap from the damper assembly. 
 
WARNING: Do not spill Fluid 41 on your skin or on your clothes. Fluid 41 is         
harmful and can cause skin disease and damage to clothes. 
 
Note:  Catch the residual oil into a suitable container. 
 
 Clean the cap with acetone. 
 Replace the O-Ring from the cap by new O-Ring ORAR00227-N7083 and apply 
a coat of Additive 1U-9891 on the new O-Ring. 
 
Caution: Do not use steel tools when removing the O-Ring. 
  Do not scratch the surfaces of the groove. 
6  Remove the nut on the piston end plate. 
7  
Install nut LN 9348-08 on the piston end plate. Secure the connection with Loctite 262 
i.a.w. drawing D60-3277-10-00_01. 
 
 
Picture 2 
8  Allow Loctite to cure before filling (Minimum cure time 12 hours). 
9  Install the bottom cap with the bolt, washer and nut. 
10  Remove the spacer from piston tube. 
11  Install the charging valve with a new O-Ring MS 28775-010. 
12  
Adjust the direction of the piston tube to the cylinder tube acc. to picture 3. 
 
Note: The charging valve must be aligned with the nut from the bolt holding the 
bottom cap.  
Piston end plate 
Nut 
Spacer

### Page 8

Diamond Aircraft Industries GmbH 
N. A. Otto-Straße 5 
A-2700 Wiener Neustadt 
WI-MSB 42-095 
WI-MSB 42NG-026 
Revision 0 
Page 4 of 4 
11-Nov-2011 
 
 
Picture 3 
13  Fill and charge the Damper acc. to AMM Section 32-10.  
14  Install the Damper to the MLG acc. to AMM Section 32-10. 
15  Perform steps 2 through 14 on the RH MLG damper. 
16  Clean working area and check for foreign objects. 
17  Do a landing gear extension and retraction test and check clearance between MLG wheel and wheel bay i.a.w. AMM Section 32-10.  
18  Apply anti-corrosion coating on damper connections i.a.w. AMM Section 12-30.  
19  Perform functional check of altered, repaired and new parts. 
20  Test all systems in working area for function. 
21  Make necessary entries into aircraft logs.

### Page 9 (OCR)

•  10  Sheet 1
APPROVAL  SEE TB  BusakShamban  BusakShamban  Parker  Fa. Mayer  Fa. Mayer  Fa. Mayer  Supplier  Scale:  1￾2  D60-3277-10-00_01  from
REVISION  ZONE  DATE  DESCRIPTION  MAM 42-434  08.06.10  ALL  NEW DRAWING, SUPERSEDES  D60-3277-10-00  Detail C  2:1  O-Ring  O-Ring  • Ring  Ventil  Ventilkappe ZZ-V-25 (schematisch)  HEXAGON NUT  Sechskantmutter  Sechskantschraube  Sechskantschraube  Schelbe  Sechskantmutter- niedrig  Scheibe  Dichtung  Part Nr. 410194  Part Nr. 410194  Stützring  Part Nr. 410194  Gleitring  Deckel  Drossel  BEARING  Rohr  Description  Specification  General Tolerance:  IS O 276B  medium  Date1 5 JUNI 201: Name  Next Higher Assembly :  Title :  D60-3237-21-00_01  MLG Damper  > Diamond  Drawing Number:  DA42  Twin Star  Saved undeD60-3277-10-00_01.asmlunbelastet
Section B-B  ORAR00227-N70  ORAR00224-N70  MS 28775-010  MS 27436  MS 20813  LN9348 M8  LN9348 M6  LN 9037-M6x80  LN 9037-M4x12  LN 9025 - 6,4  DIN 936-M8-zp  DIN 9021-4,5-A2  D60-9032-77-01  D80-9032-77-01  D80-9032-77-01  D60-3277-10-53  D60-3277-10-52  D60-3277-10-51  D60-3277-10-34_01  D60-3277-10-33  060 3277.10.30  D60-3277-10-31  Part Number  Approved: C  JUN Triname  *.* MAM 42-434 08.06.10 M. Scheikl  Change
1:1  14  Pas. OTY
12  22  16  13  FLAG NOTES  SECURE WITH LOCTITE 262  ATTENTION:  MINIMUM CURE TIME 12h BEFORE FILLING  SECURE WITH LOCTITE 648  SECURE ITEM 14 AFTER INSTALLATION  WITH A PRICK PUNCH ON THE BOTTOM SIDE
Section A-A
21
2745 ÷0,5
415,5 +0,5

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
