# Dowty Propellers Alert Service Bulletin F50-61-A165: Revision 2

- Rights: © Dowty Propellers. Filed by the FAA in regulations.gov docket FAA-2015-3661; AD 2016-05-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Dowty Propellers Alert Service Bulletin F50-61-A165](https://openairdocs.org/service-documents/dowty-propellers/f50-61a165.md)
- Title as filed: Dowty F50-61-A165 Rev 2
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/eb/53/eb539c599d9175d4e9c1195ff80398cfd27df35dc614b6e9b06c510fd8830f1f
- Page: https://openairdocs.org/service-documents/dowty-propellers/f50-61a165/file/eb539c599d91

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SERVICE BULLETIN
SERVICE BULLETIN F50-61-A165
TRANSMITTAL LETTER FOR REVISION NO.2
Dated Jul 28/15
1. REASON
A. Marking of conversion scheme number 650510484 at 3.  A. (7) revised to include procedures for unpainted
and painted hubs.
2.   ACTION
A. Remove and destroy existing pages 1, 3 and 4 of th e service bulletin and replace with revised pages 1, 3
and 4 dated Jul 28/15.
Dowty Propellers
Anson Business Park, Cheltenham Road East, Gloucester, GL2 9QN ENGLAND
Telephone: 01452 716000  Facsimile: 01452 716001

### Page 2

Page 1 of 5
CAGE CODE: U7387
For Europe, Africa, India and
Middle East contact:
Dowty Propellers
Anson Business Park
Cheltenham Road East,
Gloucester, GL2 9QN, United Kingdom
T: + 44 (0)1452 716000
F: + 44 (0)1452 716001
For Asia, Australasia and the Pacific
contact:
Dowty Propellers
Anson Business Park
Cheltenham Road East,
Gloucester, GL2 9QN, United Kingdom
T: + 44 (0)1452 716000
F: + 44 (0)1452 716001
For the Americas
contact:
Dowty Propellers
114 Powers Court
Sterling, VA 20166
United States of America
T: + 1 (703) 421 4434
F: + 1 (703) 450 0087
GEK 119812
Copyright (2012), GE Aviation Systems Ltd., U.K
The information contained in this document is GE Aviation System s Ltd proprietary information and is disclosed in confidence. I t is the
property of GE Aviation Systems Ltd and shall not be used, discl osed to others or reproduced wi thout the express written consen t of GE
Aviation Systems Ltd, including, but without limitation, it is no t to be used in the creation, m anufacture, development, or derivation of any
repairs, modifications, spare parts, designs, or configuration changes or to obtain FAA, CAA, EASA, or any other government or regulatory
approval to do so. If consent is given for reproduction in whole or in part, this notice and the notice set forth on each page of this document
shall appear in any such reproduction in whole or in part.  The in formation in this document may also be controlled by U.K. exp ort laws.
Unauthorized export or re-export is prohibited.
All technical documentation and information contained herein, with respect to assembly and disassembly, cleaning, inspection methods
and limits, repair methods and limits, operational limits, life limits and the like, have been developed and approved for use w ith this
equipment and parts that have been manufactured and/or approved by GE and that have been maintained in accordance with GE 
technical documentation and recommendations.  GE has no contractual or legal obligation for, nor knowlege of, non-GE-approved
parts and repairs.  Accordingly, this document is not intended to apply to non-GE-approved parts and repairs.
ALERT
 Manual Ref: 61-10-34
SERVICE BULLETIN
PROPELLER - REAR HALF HUB DOWEL HOLE CRACKS
1. Planning Information
WARNING: FAILURE TO IMPLEMENT ANY INSTRUCTION  GIVEN HERE, AS AMENDED FROM TIME
TO TIME BY DOWTY PROPELLERS, MAY ENDANGER HEALTH AND SAFETY .
A. Effectivity
Aircraft affected : Fokker F27 Mk 050, F27 Mk 0502 and F27 Mk 0604
Unit affected : Propeller
Type No. : (c)R352/6-123-F/1, (c)R 352/6-123-F/2, (c)R410/6-123-F/35
Part No. : 660715001, 660715004 and 660715005
Hub Part No. 660715201, 660715255, 660720 217,660720241, 660720252, 660720260,
660720288. All other hub part numbers are not affected by this service bulletin.
Serial Nos. : All
B. Concurrent requirements
(1) None.
Non Mod.
Nov 19/12  F50-61-A165
Jul 28/15 (Revision 2)

### Page 3

Page 2
GE Aviation Systems Ltd Proprietary Information 
Use o r disclosure  of data  co ntain ed on this sheet is su bject to  the rest rictions on  the cover or first page
ALERT
C. Reason
(1) Cracks have been found around the hub location dowel holes in the face of the rear half hub of the
propeller. These cracks will reduce the service life of the hub assembly.
(2) The installation of liners in the hub location dowel hole s will reduce the occurr ence of cracks and
extend the service life of the hub assembly.
D. Description
(1) This service bulletin gives the procedure for the in stallation of liners in the hub location dowel holes
in the face of the rear half hub.
E. Compliance - ALERT
(1) For any hub with a part number shown in para 1.A. that has not been repaired to CMM 61-10-34,
Repair No. 53. Install the liners in to the hub location dowel holes at the next shop visit when the
propeller is sent for repair or overhaul. Refer to the accomplishment instructions para 3.
(2) For any hub that has been inspected and found to have been repaired to CMM 61-10-34, Repair
No. 53. Refer to para 3.B. only.
F. Approval
(1) This service bulletin was approved and classified as ALERT. The technical content of this service
bulletin, which affects airworthinesss, is approved under the authority of Design Organisation
Approval No. EASA.21J.008.
G. Manpower
(1) This service bulletin will take approximately 5.0 ma n-hours to incorporate at repair or overhaul.
H. Weight and Balance
(1) None.
I. Electrical Load Data
(1) None.
J. Software Accomplishment Summary
(1) None.
K. References
(1) Dowty Propellers Component Maintenance Manual 61-10-34.
(2) Dowty Propellers Standard Practices Manual 60-00-00.
L. Other Publications Affected
(1) None.
M. Interchangeability or Intermixability of Parts
(1) None.
Nov 19/12 F50-61-A165
May 12/15 (Revision 1)

### Page 4

Page 3
GE Aviation Systems Ltd Proprietary Information 
Use o r disclosure  of data  co ntain ed on this sheet is su bject to  the rest rictions on  the cover or first page
ALERT
2. Material Information
A. Material-Price and Availability
(1) The items necessary to accomplish this Service Bulletin are given in para 2. B. 
(2) Make an order for the items to the address that follows:
Aviall Services, Inc.
PO Box 619048
DFW Airport
Dallas TX75261
USA
(3) Ask Aviall for the pr ice and supply date.
B. Material Necessary
The items necessary to accomplish this Service Bulletin are:
New Qty for
Part No. Each Unit Name
(1) 660712687 2 Liner 
(2) P999230 A/R Sealant (PR1440B-B1/2, PS5020-3)
C. Reidentified Parts
(1) None.
D. Tooling
(1) None.
3. Accomplishment Instructions  
The figure/item numbers in  parentheses are those used in the illustrated parts list  of the Component
Maintenance Manual.
A. Procedure (Refer to Figure 1)
(1) Machine the dowel holes and chamfers as shown.
(2) Flaw detect the machined areas: refer to NDT 8DAP.
(3) Locally apply protective treatment to the ma chined surfaces in accordance with PS5118 or,
PS5114.
(4) Refer to PS5020-3. Apply a bead of PR1440B-B1/2 (P999230) sealant to the bottom of the fine limit
bore in the dowel holes in area Y . This will hold the liners.
(5) Assemble the liners 660712687 to the dowel holes as shown. Do a check to make sure the internal
diameter of the liners is as shown.
(6) Repair any damaged paint: refer to PS51003-1.
(7) Write the Dowty Propellers conversion scheme number 650510484 adjacent to the existing part
number as follows:
(a) For unpainted hubs, in accordance with PS5405-3.
(b) For painted hubs, in accordance with PS5405-1.
(8) Examine the part to ensure that the conversi on scheme, number 650510484 procedure, has been
correctly performed.
Nov 19/12 F50-61-A165
Jul 28/15 (Revision 2)

### Page 5

Page 4
GE Aviation Systems Ltd Proprietary Information 
Use o r disclosure  of data  co ntain ed on this sheet is su bject to  the rest rictions on  the cover or first page
ALERT
B. Records
(1) When the instructions of this service bulletin ha ve been completed, writ e the Service Bulletin No.
F50-61-A165 in the propeller log book and on the hub log card.
(2) For any hub that has been repaired to CMM 61-10-34, Repair No. 53:
(a) Write the conversion scheme number 650510484 adjacent to the existing part number at the
next shop visit. Refer to PS5405-3.
(b) Write the service bulletin number F50-61-A165 in the propeller log book and on the hub log
card.
Nov 19/12 F50-61-A165
Jul 28/15 (Revision 2)

### Page 6

Page 5
GE Aviation Systems Ltd Proprietary Information 
Use o r disclosure  of data  co ntain ed on this sheet is su bject to  the rest rictions on  the cover or first page
ALERT
Conversion of Hub Assembly
Figure 1
F506753
17,0 mm (0.669 in) DIA. (REF.)
22,5 mm (0.88 in) MAXIMUM
TO DRILL POINT (REF.)
18,30 to 18,55 mm
(0.720 to 0.730 in)
21,0 mm (0.826 in)  (REF.)
18,75 to 19,0 mm DIA.
(0.738 to 0.748 in)
CHAMFER
21,97 to 22.22 mm DIA.
(0.864 to 0.874 in)
17,467 to 17.478 mm DIA.
(0.687 to 0.688 in)
0,04 mm DIA.
(0.001in) A
0,25 to 0.38 mm RAD
(0.009 to 0.014 in)
45o
2,0 mm (0.078) RAD.
1,75 to 1,00 mm RAD.
 (0..03 to 0.04 in)
(REF.)
0,38 to 0,643 mm
(0.015 to 0.025 in)
DETAIL Z
DETAIL Z
15,95 mm (0.628 in) DIA.
 MINIMUM LINER BORE
AFTER LINER ASSEMBLY
660712687 (2-0FF) LINER
FITTED FLUSH WITH CHAMFER
AT MOUTH OF BORE
A
171,45  DIA.
(6.75 in)
Y
0,1
(4)
Nov 19/12 F50-61-A165
May 12/15 (Revision 1)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
