# Embraer Alert Service Bulletin 500-55-A004: U.S. DOT/FAA - Revision 2 Service Bulletin

- Rights: © Embraer S.A. Filed by the FAA in regulations.gov docket FAA-2014-0511; AD 2014-15-51 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Embraer Alert Service Bulletin 500-55-A004](https://openairdocs.org/service-documents/embraer/500-55a004.md)
- Title as filed: U.S. DOT/FAA - Revision 2 Service Bulletin
- Pages: 19
- PDF: https://openairdocs.org/files/sha256/f4/3c/f43c71d1ec6a532ee865eb05f06ff28fc4001994b7912c9db5a97faa321e4fde
- Page: https://openairdocs.org/service-documents/embraer/500-55a004/file/f43c71d1ec6a

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

1. DESCRIPTION
This sheet transmits Revision 02 to Service Bulletin 500-55-A004.
This is a complete reissue of the Service Bulletin.
This revision incorporates the information presented in the Information Notice related to the
previous issues of this Service Bulletin, as listed below:
None.
2. ADDITIONAL ACTION
Aircraft that have complied with the previous issue of this service bulletin do not need any
additional action.
3. RECORD OF REVISION
Basic issue: 21/Jul/2014
Revision 01: 24/Jul/2014
Revision 02: 25/Jul/2014
4. HIGHLIGHTS
The topics, affected pages, and a brief description of the content-related changes introduced
by this revision are presented below.
Revision bars are put in the left margin of each page to show the location of the significant
changes. Text displacement and text format changes are not indicated.
TOPIC/PAGE DESCRIPTION OF REVISION
1. PLANNING INFORMATION
1.A. SB EFFECTIVITY / 01 Added aircraft to the SB effectivity.
1.C. REASON / 02 Added reason for Revision 02.
1.E. COMPLIANCE / 03 Changed the Compliance.
3. ACCOMPLISHMENT INSTRUCTIONS
Page 8 Editorial change.
TM
ÀREA DE NÃO INTERFERÊNCIA
TRANSMITTAL LETTER
SB No.: 500-55-A004
PAGE: 1 of 1
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 2

STABILIZERS - INSPECTION AND REPLACEMENT OF THE BARREL SELF-LOCKING
NUT
In connection with the use of this document, Embraer does not provide any express or implied
warranties and expressly disclaims any warranty of merchantability or fitness for a particular purpose.
1. PLANNING INFORMATION
A. SB EFFECTIVITY
(1) PART I: INSPECTION OF BARREL SELF-LOCKING NUTS
Aircraft affected:
MODEL SN
EMB-500 ’Phenom 100’ 50000218 thru 50000333, 50000336, 50000337,
50000339, and 50000341.
(2) PART II: REPLACEMENT OF THE BARREL SELF-LOCKING NUT
Aircraft affected:
MODEL SN
EMB-500 ’Phenom 100’ 50000218 thru 50000333, 50000336, 50000337,
50000339, and 50000341.
In-production effectivity:
The subject presented in this bulletin does not affect any in-production aircraft.
B. CONCURRENT REQUIREMENTS
None.
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 - 25/Jul/2014
SB No.: 500-55-A004
PAGE: 1 of 18
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 3

C. REASON
(1) HISTORY
At the assembly line, during and inspection on the horizontal stabilizer-to-vertical
stabilizer attachment, barrel self-locking nuts with cracks have been found. The
investigation determined that the cracks were a result of hydrogen embrittlement and
related to the nut manufacturing process. Embraer is working with the barrel
self-locking nuts supplier to identify the affected batch.
(2) OBJECTIVE
To inspect the barrel self-locking nuts of the horizontal stabilizer-to-vertical stabilizer
attachment and replace them, as necessary.
(3) EXPECTED BENEFITS
The inspection is aimed at preventing that defective barrel self-locking nuts remain
installed, which can affect the integrity of the horizontal stabilizer-to-vertical stabilizer
attachment.
(4) REVISION HISTORY
Revision 01.
– Changed the Compliance.
Revision 02.
– This revision is issued to add aircraft SN 50000218 thru SN 50000238 to the
service bulletin effectivity.
– Changed the Compliance.
D. DESCRIPTION
(1) PART I: INSPECTION OF BARREL SELF-LOCKING NUTS
The modification presented in PART I of this service bulletin consists of inspecting
the installed barrel self-locking nuts. If one or more barrel self-locking nut is of the
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 2
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 4

same type shown in Figure 1 C2, NOT ACCEPTABLE and 4. APPENDIX 1, replace
it/them as given in PART II.
For removed nuts, fill up the table given in 4. APPENDIX 2 with the requested
information, send it and contact Embraer Technical Support Department through
contact.center@embraer.com.
(2) PART II: REPLACEMENT OF THE BARREL SELF-LOCKING NUT
The modification presented in PART II of this service bulletin consists of replacing
the defective barrel self-locking nut.
E. COMPLIANCE
This Service Bulletin must be accomplished before next flight.
F. APPROVAL
The technical aspects of this Service Bulletin are approved by: Embraer - Engineering
Board.
G. COMMUNICATIONS TO EMBRAER
EMBRAER requests that any results found during these inspections be informed to your
local EMBRAER representatives or offices.
H. REFERENCES
AMM 500/( ) Aircraft Maintenance Manual PART II - 20-00-00 - STANDARD
PRACTICES-AIRFRAME.
AMM 500/( ) Aircraft Maintenance Manual PART II - 55-32-23 - STABILIZERS.
SRM 500/( ) Structural Repair Manual Part II - 51-21-05, 51-22-01, and 51-22-
03 - STANDARD PRACTICES AND STRUCTURES - GENERAL.
I. PUBLICATIONS AFFECTED
None.
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 3
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 5

2. MATERIAL INFORMATION
A. MATERIAL - PRICE AND AVAILABILITY
None.
B. INDUSTRY SUPPORT INFORMATION
(1) WARRANTY COVERAGE
(a) Parts
The SB parts will be provided at no charge.
(b) Labor
Embraer will compensate 2.5 man-hours for the service bulletin PART I
incorporation if it is performed in an Embraer-authorized service center
NOTE: If barrel self-locking nut replacement is necessary, there will be an
additional 0.5 man-hours per nut.
(c) Expiration
Within the next 30 days.
C. MATERIAL NECESSARY FOR EACH AIRCRAFT
The expendable or consumable parts presented in the AMM Tasks referred to in this
bulletin, which are necessary for its accomplishment, should be procured from the
operator’s inventories or ordered as spares.
(1) MATERIAL TO BE PROCURED
(a) APPLICABLE TO PART II - Parts
The parts below should be procured from Embraer as spare part.
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 4
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 6

NEW PN DESCRIPTION OLD PN QTY DISP
RMLH2577-070 BARREL SELF-LOCKING NUT NAS577B7A 04 3
NOTE: The old Part Number shall be with the chamfered edge.
(b) APPLICABLE TO PART II - Consumable Materials
The material below or equivalent, required for the accomplishment of this
bulletin, should be procured from the operator’s inventories or from a local
supplier.
NOTE: When applicable, the use of alternative consumable material in place of
the ones specified is allowable, provided that these alternative are
approved by Embraer as indicated in the related Embraer Technical
Publications or through a formal Embraer communication channel.
NEW PN DESCRIPTION OLD PN QTY DISP
Cor-Ban 27L
Corrosion Inhibitor
Compound (Spec MEP
09- 075)
-A R 6
P/S870C-12
or
P/S870C-12 654 SEM
KIT
or
P/S870C-12 MC 780
C-12
Sealant (Spec MIL-
PRF- 81733)
-A R 6
F-900-Red
or
F-925-Pink
or
F-925-Yellow
Torque Seal (Spec
MEP 09-068)
-A R 6
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 5
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 7

NEW PN DESCRIPTION OLD PN QTY DISP
Alodine 1200
or
Alodine 1200S
or
Bonderite M-CR
1200S AERO
Alodine (Spec MIL-
DTL-81706) -A R 6
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 6
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 8

3. ACCOMPLISHMENT INSTRUCTIONS
The steps below outline the general accomplishment instructions.
The detailed sequence is included in the respective figure, when necessary.
A. Make sure that the aircraft is safe for maintenance. Refer to AMM TASK 20-00-00-910-
801-A/200 - Aircraft Maintenance Safety Procedures.
B. Remove the front boom fairing according to instructions given in AMM TASK 55-32-23-
000-801-A/400 - Front Boom Fairing - Removal.
C. APPLICABLE TO PART I:
(1) Inspect the barrel self-locking nuts. If one or more barrel self-locking nuts is of the
same type shown in Figure 1 C2, NOT ACCEPTABLE replace it/them as given in
PART II. Otherwise go to Step 3.E.
(2) For removed nuts, fill up the table given in 4. APPENDIX 2 with the requested
information, send it and contact Embraer Technical Support Department through
contact.center@embraer.com.
D. APPLICABLE TO PART II
(1) Replace the barrel self-locking nut according to instructions given in Figure 2.
NOTE: Be careful not to damage the de-icer assembly tubes when you replace the
barrel self-locking nuts.
NOTE: Be careful not to drop into the vertical-stabilizer leading edge the barrel
self-locking nut when you remove it.
E. Reinstall the front boom fairing according to instructions given in AMM TASK 55-32-23-
400-801-A/400 - Front Boom Fairing - Installation.
F. Restore the aircraft to normal. Refer to AMM TASK 20-00-00-910-801-A/200 - Aircraft
Maintenance Safety Procedures.
G. Enter the accomplishment of this bulletin in the applicable documents.
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 7
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 9

H. Fill out the attached “Service Bulletin Implementation and Evaluation” form and return it
to:
NOTE: To formally inform that the SB has been incorporated fleet-wide or that the SB will
not be incorporated, so that Embraer can update the affected technical publica-
tions, use the “Service Bulletin Full-Fleet Incorporation Report” form, which is
available on the FLYEmbraer portal (http://www.flyembraer.com).
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 8
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 10

EM500ENSB550015A.DGN
A
ZONES
335
343
344
A
B
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 9
FIGURE1-P A R TI-SELF-LOCKING NUTS INSPECTION
(SHEET 01 OF 03)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 11

EM500ENSB550016A.DGN
B
C
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 10
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
FIGURE1-P A R TI-SELF-LOCKING NUTS INSPECTION
(SHEET 02 OF 03)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 12

EM500ENSB550017A.DGN
C 1
C 2
FLAT EDGE
RETAINER
BARREL 
SELF−LOCKING NUT
CHAMFERED EDGE
RETAINER
BARREL 
SELF−LOCKING NUT
(NOT ACCEPTABLE NUT)
(ACCEPTABLE NUT)
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 11
FIGURE1-P A R TI-SELF-LOCKING NUTS INSPECTION
(SHEET 03 OF 03)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 13

1. Replace the barrel self-locking nut as follows:
(a) Remove one bolt and its washer at a time following the installation sequence (1),
(2), (3) and (4) as shown in Det.B.
(b) Remove and discard the barrel self-locking nut PN NAS577B7A and retain its
retainer PN NAS578-7B.
WARNING : DURING THE CLEANING PROCEDURE, DO NOT LET THE
CLEANING SOLUTION TOUCH YOUR SKIN AND DO NOT
BREATHE ITS VAPORS OR MISTS. DO THE PROCEDURE IN AN
AREA WITH A GOOD AIRFLOW. PUT ON SAFETY CLOTHES,
GOGGLES, AND GLOVES.
(c) Clean the bolt and hole to remove the old sealant. Refer to SRM PART 2 51-22-01/1
- SURFACE FINISHING AND PROTECTION - CLEANING.
(d) Apply alodine to the hole according to instructions given in SRM PART 2 51-22-03/1
- SURFACE FINISHING AND PROTECTION - ALODINE APPLICATION.
(e) Apply corrosion inhibitor compound Cor-Ban 27L to the new barrel self-locking nut
PN RMLH2577-070.
(f) Install the retainer to the new barrel self-locking nut, and install it to the hole.
(g) Position the countersunk washer on the bolt observing its correct installation
position.
(h) Apply sealant to the bolt. Refer to SRM PART 2 51-21-05/1 - FASTENER
SEALING.
NOTE: Make sure that you do not apply sealant to the thread of the bolts.
NOTE: Do not remove the excess sealant extruded.
(i) Read the drag torque (torque necessary to overcome the braking resistance of the
barrel self-locking nut) on the torque wrench. The values are shown in table below:
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 12
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
FIGURE2-P A R TI I-BARREL SELF-LOCKING NUTS REPLACEMENT
(SHEET 01 OF 04)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 14

NOTE: If the drag torque value is out of the range, the barrel self-locking nut shall
be replaced.
Drag Torque
Bolt Position Bolt Diameter (in) Drag Torque (min.) Drag Torque (max.)
1, 2, 3 and 4 7/16 (1.6 N.m) 14 lb.in (11.2 N.m) 100 lb.in
(j) With a torque wrench, apply the pre-torque to the bolt.
Pre-Torque
Bolt Position Bolt Diameter (in) Pre-Torque
1, 2, 3 and 4 7/16 (19.2 N.m) 170 lb.in
(k) Wait 15 minutes, release the pre-torque and apply the final tightening torque to the
bolt.
(l) Add the measured drag torque value to the tightening torque ((73.4 N.m) 650 lb.in).
The final tightening torque value is shown in the table below:
NOTE: The torque wrench shall be adjusted to the specified nominal value ((73.4
N.m) 650 lb.in) plus the previously measured drag torque (drag torque
measured at step above 1.(i) Figure 2).
Final Tightening Torque
Bolt Position Bolt Diameter (in) Final Tightening Torque
1, 2, 3 and 4 7/16 (73.4 N.m) 650 lb.in + dragtorque
2. Apply inspection torque seal to the head of the bolt.
3. Replace the next barrel self-locking nut and repeat the steps 1 to 2, as applicable.
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 13
FIGURE2-P A R TI I-BARREL SELF-LOCKING NUTS REPLACEMENT
(SHEET 02 OF 04)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 15

EM500ENSB550013A.DGN
A
ZONES
335
343
344
A
B
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 14
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
FIGURE2-P A R TI I-BARREL SELF-LOCKING NUTS REPLACEMENT
(SHEET 03 OF 04)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 16

EM500ENSB550014B.DGN
01
02
B
02
03
SEALANT P/S 870C−12
COR−BAN 27L
04
COUINTERSUNK WASHER
PN MS21299−C7
(4 POSITIONS)
(REUSE)
12
1
BOLT (3)
PN NAS21134−07020
(REUSE)
BOLT (1)
PN NAS21134−07020
(REUSE)
BOLT (2)
PN NAS21134−07020
(REUSE)
BOLT (4)
PN NAS21134−07020
(REUSE)
02 04 05
02 04 05
02 04 05
05
04
05
APPLY TORQUE ACCORDING TO STEP 1
ALODINE 1200
TORQUE SEAL
RETAINER
PN NAS578−7B
(4 POSITIONS)
(REUSE)
3
1
1
BARREL 
SELF−LOCKING NUT
PN NAS577B7A
(4 POSITIONS)
(REMOVE AND
DISCARD)
3
1
01
BARREL 
SELF−LOCKING NUT
PN RMLH2577−070
(4 POSITIONS)
(INSTALL)
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 15
FIGURE2-P A R TI I-BARREL SELF-LOCKING NUTS REPLACEMENT
(SHEET 04 OF 04)
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 17

4. APPENDIX 1
BARREL SELF-LOCKING NUTS
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 16
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 18

(NOT ACCEPTABLE NUT)
CHAMFERED 
EDGE
(ACCEPTABLE NUT)
FLAT EDGE
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
SB No.: 500-55-A004
PAGE: 17
Copyright © 2014 by Embraer S.A. All rights reserved.

### Page 19

4. APPENDIX 2
Removed Nuts (Position) Cracked or BrokenNuts Flight Cycles Flight Hours Aircraft Serial Number
y e s()
n o()
y e s()
n o()
y e s()
n o()
y e s()
n o()
TM
ÀREA DE NÃO INTERFERÊNCIA
SERVICE BULLETIN
ALERT
ALERT
SB No.: 500-55-A004
PAGE: 18
DATE: 21/Jul/2014
REVISION No.: 02 -  25/Jul/2014
Copyright © 2014 by Embraer S.A. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
