# Embraer Service Bulletin 505-22-0006

Copy: No revision named ("Embraer Service Bulletin 505-22-0006 Rev 0"), 10 pages: PDF https://openairdocs.org/files/sha256/8d/04/8d046aac00dba7ba9e43e5d0b4a631904e7af0941a065542dd40485c267156f1; text https://openairdocs.org/service-documents/embraer/sb-505-22-0006/file/8d046aac00db.md. Rights: © Embraer S.A. Filed by the FAA in regulations.gov docket FAA-2025-0478, the docket of AD 2026-03-05. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Embraer](https://openairdocs.org/service-documents/embraer.md)
- Type: Service bulletin (Service Bulletin)
- Number: 505-22-0006
- Page: https://openairdocs.org/service-documents/embraer/sb-505-22-0006

## Text (10 pages)

Rights: © Embraer S.A. Filed by the FAA in regulations.gov docket FAA-2025-0478, the docket of AD 2026-03-05. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

AUTO FLIGHT - AILERON SERVO ASSEMBLY - PARTS REPLACEMENT
In connection with the use of this document, Embraer does not provide any express or implied warranties and expressly disclaims any
warranty of merchantability or fitness for a particular purpose.
This document contains trade secrets, confidential, proprietary information of Embraer and technical data subject to U.S. Export
Administration Regulation ("EAR") and other countries export control laws and regulations. Diversion contrary to the EAR and other laws
and regulations is strictly forbidden. The above restrictions may apply to data on all pages of this document.
1. PLANNING INFORMATION 
A. SB EFFECTIVITY 
  Aircraft affected:
MODEL SN
EMB-505 'Phenom 300' 50500004 thru 50500012, 50500014, 50500016 thru 50500665,and 50500667 thru 50500779.
  Affected component:
  Cable guard PN 233-00075-02, clutch cartridge PN 383-00000-72, bolt PN 211-00090-03, and washer
PN 212-00203-04 or washer PN 212-0035-10.
NOTE: This effectivity list includes the aircraft originally equipped with the affected component. Since
this component is a “Line Replaceable Unit” (LRU), it may be necessary to refer to the fleet
maintenance control record and verify whether the unit has been replaced with another one
during routine maintenance.
  In-production effectivity:
EMB-505 "Phenom 300" aircraft SN 50500780 and on have an equivalent modification factory-
incorporated.
B. CONCURRENT REQUIREMENTS 
  None.
C. REASON 
  (1) HISTORY
  The longer cable retention pins are necessary to make sure that the GSM86 servo gearbox
capstan is free to rotate in the event that the clutch retaining bolt is not retained. The bolt and
washer material changes were to make the design more robust against corrosion-related issues.
The clutch change that added the drain paths was to prevent contaminant buildup inside the
clutch and consequently bolt corrosion.
  (2) OBJECTIVE
  To provide instructions to replace the parts of the autopilot aileron servo assembly.
  (3) EXPECTED BENEFITS
  To guarantee that the aircraft is according to the new design of the autopilot aileron servo
assembly.
  (4) REVISION HISTORY
  None.
SERVICE BULLETIN
Date:  Sep 18, 2024
Revision No.: 
SB505-22-0006
Page 1 of  10
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 2

D. DESCRIPTION 
  The modification given in this bulletin is for the replacement of the cable guard, clutch cartridge, bolt
and washer with a new Part Number.
  To get access to the work area, it is necessary to open access panels 191BL, 191CR, and 132AR.
E. COMPLIANCE 
1) SB CATEGORY
 
  Category 04: OPTIONAL
 
2) SB ACCOMPLISHMENT
 
  This Service Bulletin can be accomplished at any time, at the operator’s discretion.
F. APPROVAL 
  The changes to the type design specified in this SB have been approved by ANAC - Agência Nacional
de Aviação Civil.
  This Service Bulletin was approved based on the airplane's original Embraer delivery configuration or
as modified by other Embraer-approved documents.
G. ESTIMATED MANPOWER 
  This estimate is for direct labor only, performed by experienced personnel, and does not include the
time to plan, prepare, or inspect the work.
  It is assumed that all the tools, parts, and other means are promptly available when necessary.
  This estimate does not include the sealant, paint, or adhesive curing time.
– Access opening: 0.35 man-hours.
– Modification: 1.50 man-hours.
– Access closure: 0.50 man-hours.
– Test: 3.00 man-hours.
H. WEIGHT AND BALANCE 
– Change in basic weight: None.
– Change in basic moment: None.
I. ELECTRICAL LOAD DATA 
  Not changed.
J. SOFTWARE ACCOMPLISHMENT SUMMARY 
  None.
K. REFERENCES 
AMM 505/( ) Aircraft Maintenance Manual PART I - 22-11-00 - AUTO FLIGHT.
SERVICE BULLETIN
SB505-22-0006
Page 2 of  10
Date:  Sep 18, 2024
Revision No.: 
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 3

AMM 505/( ) Aircraft Maintenance Manual PART II - 20-00-00 - STANDARDPRACTICES-AIRFRAME.
AMM 505/( ) Aircraft Maintenance Manual PART II - 22-11-00, 22-11-02, 22-11-03, and22-11-04 - AUTO FLIGHT.
L. PUBLICATIONS AFFECTED 
AIPC 505/( ) Aircraft Illustrated Parts Catalog - 22-11-03 - AUTO FLIGHT.
SERVICE BULLETIN
Date:  Sep 18, 2024
Revision No.: 
SB505-22-0006
Page 3 of  10
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 4

2. MATERIAL INFORMATION 
A. MATERIAL - PRICE AND AVAILABILITY 
  (1) MATERIAL AVAILABLE FROM EMBRAER
  The material below required for the accomplishment of this bulletin will be available from
Embraer.
  (2) MATERIAL AVAILABLE FROM OTHER VENDORS
  None.
B. INDUSTRY SUPPORT INFORMATION 
  (1) WARRANTY COVERAGE
  (a) Parts
  The SB parts will be provided at no charge.
  (b) Labor
  Embraer will compensate 4.25 hours for the SB incorporation if it is performed in an
Embraer-authorized service center or in an Embraer-owned service center.
  (c) Expiration
  The terms expressed in the warranty coverage will be valid for 40 months after the SB issue
date.
C. MATERIAL NECESSARY FOR EACH AIRCRAFT 
  When applicable, the use of alternative or similar parts in place of the ones specified in the kits is
allowable, provided that these alternative or similar parts are approved by Embraer as indicated in the
related Embraer Technical Publications or through a formal Embraer communication channel.
  The expendable or consumable parts presented in the AMM Tasks referred to in this bulletin, which are
necessary for its accomplishment, should be procured from the operator's inventories or ordered as
spares.
  (1) TOP KITS AND KITS
KIT PN 505-39051-601 - AUTOPILOT SERVO AILERON
NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP
233-00075-04 CABLE GUARD 233-00075-02 03 03 3
211-00837-01 BOLT 211-00090-03 01 01 3
212-00210-04 WASHER 212-00203-04 01 01 3
383-000C0-72 CLUTCHCARTRIDGE 383-00000-72 01 01 3
MS21256-1 CLIP WIRE - 02 02 2
SERVICE BULLETIN
SB505-22-0006
Page 4 of  10
Date:  Sep 18, 2024
Revision No.: 
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 5

(Continued)
KIT PN 505-39051-601 - AUTOPILOT SERVO AILERON
NEW PN DESCRIPTION OLD PN QTYSUP QTYRQD DISP
MS3367-5-9 TIE-DOWN STRAP - 01 01 2
DISPOSITION: 2 = Incorporate part bearing NEW PN
3 = Replace part bearing OLD PN with part bearing NEW PN
  (2) MATERIAL TO BE PROCURED
  (a) Parts
  None.
  (b) Consumable Materials
  None.
  (c) Kit Updating
  None
D. MATERIAL NECESSARY FOR EACH SPARE 
  None.
E. REIDENTIFIED PARTS 
  None.
F. TOOLING - PRICE AND AVAILABILITY 
  None.
SERVICE BULLETIN
Date:  Sep 18, 2024
Revision No.: 
SB505-22-0006
Page 5 of  10
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 6

3. ACCOMPLISHMENT INSTRUCTIONS 
  The steps below outline the general accomplishment instructions.
  The detailed sequence is included in the respective figure, when necessary.
  A. Make sure that the aircraft is safe for maintenance. Refer to AMM TASK 20-00-00-910-801-A/200  -
Aircraft Maintenance Safety Procedures.
  B. Carefully open access panel 191BL, 191CR and 132AR to gains access to the work area, as given in
AMM TASK 22-11-03-000-801-A/400  - Autopilot Aileron-Servo Mount - Removal. Refer to AMM SDS
22-11-00/1.
  C. Remove and retain the autopilot Aileron-Servo Cable, as given in AMM TASK 22-11-04-000-801-A/400
- Autopilot Aileron-Servo Cable - Removal.
  D. Remove and retain the autopilot aileron-servo actuator, as given in AMM TASK 22-11-02-000-801-
A/400 - Autopilot Aileron-Servo Actuator - Removal.
  E. Remove and retain the autopilot aileron-servo mount, as given in AMM TASK 22-11-03-000-801-A/400
- Autopilot Aileron-Servo Mount - Removal.
  F. Do the parts replacement to the autopilot aileron servo mount assembly, according to Figure 1. Refer
to AMM TASK 22-11-03-000-802-A/400  - Autopilot Aileron Servo Mount Assembly - Removal and
AMM TASK 22-11-03-400-802-A/400 - Autopilot Aileron Servo Mount Assembly - Installation.
  G. Do the functional test to the autopilot aileron servo mount, as given in AMM TASK 22-11-03-720-801-
A/500 - Autopilot Aileron-Servo Mount - Functional Test.
  H. Install again the autopilot aileron-servo mount, as given in AMM TASK 22-11-03-400-801-A/400  -
Autopilot Aileron-Servo Mount - Installation.
  I. Install again the autopilot aileron-servo actuator, as given in AMM TASK 22-11-02-400-801-A/400  -
Autopilot Aileron-Servo Actuator - Installation.
NOTE: Use a new tie down-strap PN MS3367-5-9 to fasten the cable of the electrical connector
J0270.
  J. Install again the autopilot aileron-servo cable, as given in AMM TASK 22-11-04-400-801-A/400  -
Autopilot Aileron-Servo Cable - Installation.
NOTE: Use a new clip PN MS21256-1 to install the turnbuckle.
  K. Do the tension adjustment to the autopilot aileron-servo cable, as given in AMM TASK
22-11-04-720-801-A/500 - Autopilot Aileron-Servo Cable - Functional Test.
  L. Do the operational test to the autopilot servo, as given in AMM TASK 22-11-00-710-801-A/500  -
Autopilot Servo - Operational Test.
  M. Close access panel 132AR, 191BL and 191CR, as given in AMM TASK 22-11-03-400-801-A/400  -
Autopilot Aileron-Servo Mount - Installation. Refer to AMM SDS 22-11-00/1.
  N. Restore the aircraft to normal. Refer to AMM TASK 20-00-00-910-801-A/200  - Aircraft Maintenance
Safety Procedures.
  O. Enter the accomplishment of this service bulletin in the applicable documents.
  P. Please use the online SB evaluation form available on the FlyEmbraer portal ( http://
www.flyembraer.com). Go to "Maintenance > Executive Jets > TechPubs > Select aircraft > Tools > SB
Evaluation > NEW SB EVALUATION" to inform us about the SBs that you have incorporated to your
fleet, as well as the difficulties found during the SB incorporation.
SERVICE BULLETIN
SB505-22-0006
Page 6 of  10
Date:  Sep 18, 2024
Revision No.: 
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 7

This will allow Embraer to consider your aircraft configuration when providing future modifications.
  Your feedback will be much appreciated to improve the quality of Embraer modifications.
SERVICE BULLETIN
Date:  Sep 18, 2024
Revision No.: 
SB505-22-0006
Page 7 of  10
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 8

FIGURE 1 - AILERON SERVO ASSEMBLY - PARTS REPLACEMENT
(Sheet 1 of 3)
  1. Carefully remove and retain bolt PN 211-A0020-14 (03 positions) and washer PN 212-00030-04 (03
positions) that attach the safety ring PN 115-00842-30 and the cable guard PN 233-00075-02 (03
positions) to the capstan PN 011-02345-01, according to DET B PRE-MOD.
  2. Carefully remove and retain the safety ring PN 115-00842-30, according to DET B PRE-MOD.
  3. Remove and discard cable guard PN 233-00075-02 (03 positions), according to DET B PRE-MOD.
  4. Remove and discard bolt PN 211-00090-03 and washer PN 212-00203-04 or 212-0035-10 that attach
the clutch cartridge PN 383-00000-72, the capstan PN 011-02345-01 and the existing retaining ring to
the autopilot aileron servo mount, according to DET C PRE-MOD.
  5. Remove and discard the clutch cartridge PN 383-00000-72, according to DET C PRE-MOD.
  6. Carefully remove and retain the capstan PN 011-02345-01, according to DET C PRE-MOD.
  7. Carefully remove and retain the existing retaining ring, according to DET C PRE-MOD.
  8. Carefully put the existing retaining ring in its installation position to the autopilot aileron servo mount.
according to DET C POST-MOD.
  9. Carefully put the capstan PN 011-02345-01 in its installation position to the existing retaining ring and
to the autopilot aileron servo mount. according to DET C POST-MOD.
  10. Carefully put the clutch cartridge PN 383-000C0-72 in its installation position to the capstan PN
011-02345-01 and attach it using bolt PN 211-00837-01 and washer PN 212-00210-04. according to
DET C POST-MOD.
  11. Carefully put the cable guard PN 233-00075-04 (03 positions) to the capstan PN 011-02345-01.
according to DET B POST-MOD.
  12. Carefully put the safety ring PN 115-00842-30 in its installation position to the cable guard PN
233-00075-04 (03 positions) and attach it using bolt PN 211-A0020-14 (03 positions) and washer PN
212-00030-04 (03 positions). according to DET B POST-MOD.
SERVICE BULLETIN
SB505-22-0006
Page 8 of  10
Date:  Sep 18, 2024
Revision No.: 
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 9

FIGURE 1 - AILERON SERVO ASSEMBLY - PARTS REPLACEMENT
(Sheet 2 of 3)
EM500ENSB220018C.IDR
A
ZONE
 191
A
191 CR
191 BL
B
BOLT
PN 211-A0020-14
(03 POSITIONS)
(REMOVE AND RETAIN)
CABLE GUARD
PN 233-00075-02
(03 POSITIONS)
(REMOVE AND DISCARD)
WASHER
PN 212-00030-04
(03 POSITIONS)
(REMOVE AND RETAIN)
SAFETY RING
PN 115-00842-30
(REMOVE AND RETAIN)
PRE - MOD
B
AUTOPILOT AILERON
SERVO MOUNT
(REF.)
C
1
1
2
3
4
4
5
6
7
EXISTING RETAINING RING
(REMOVE AND RETAIN)
CAPSTAN
PN 011-02345-01
(REMOVE AND RETAIN)
CLUTCH CARTRIDGE
PN 383-00000-72
(REMOVE AND DISCARD)
WASHER
PN 212-00203-04
OR
PN 212-0035-10
(REMOVE AND DISCARD)
BOLT
PN 211-00090-03
(REMOVE AND DISCARD)
PRE - MOD
C
SERVICE BULLETIN
Date:  Sep 18, 2024
Revision No.: 
SB505-22-0006
Page 9 of  10
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

### Page 10

FIGURE 1 - AILERON SERVO ASSEMBLY - PARTS REPLACEMENT
(Sheet 3 of 3)
EM500ENSB220022A.IDR
BOLT
PN 211-A0020-14
(03 POSITIONS)
(INSTALL AGAIN)
CABLE GUARD
PN 233-00075-04
(03 POSITIONS)
(INSTALL)
WASHER
PN 212-00030-04
(03 POSITIONS)
(INSTALL AGAIN)
SAFETY RING
PN 115-00842-30
(INSTALL AGAIN)
POST - MOD
B
AUTOPILOT AILERON
SERVO MOUNT
(REF.)
C
EXISTING RETAINING RING
(INSTALL AGAIN)
CAPSTAN
PN 011-02345-01
(INSTALL AGAIN)
CLUTCH CARTRIDGE
PN 383-000C0-72
(INSTALL)
WASHER
PN 212-00210-04
(INSTALL)
BOLT
PN 211-00837-01
(INSTALL)
POST - MOD
C
01 TORQUE: 0.9 - 1.3 N.m (8 - 12 lb.in)
02
01
FINAL TORQUE: LOCKING TORQUE 0.22 - 2.04 N.m (2 - 18 lb.in) PLUS STANDARD TORQUE 2.8 - 4.5 N.m (25 - 40 lb.in)02
AUTOPILOT AILERON
SERVO MOUNT
(REF.)
11
12
12
12
8
9
10
10
10
SERVICE BULLETIN
SB505-22-0006
Page 10 of  10
Date:  Sep 18, 2024
Revision No.: 
Copyright © by Embraer S.A. All rights reserved - See title page for details.
User: jrutherf - Printed By myTechCare - Oct 30/24 - 14:04:48

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
