# Engine Alliance Service Bulletin GP7200 72-0399: Revision D

- Rights: © Engine Alliance. Filed by the FAA in regulations.gov docket FAA-2018-0934, the docket of AD 2018-22-05. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Engine Alliance Service Bulletin GP7200 72-0399](https://openairdocs.org/service-documents/engine-alliance/gp7200-72-0399.md)
- Title as filed: GP7200 SB 72-0399-R00 Issued
- Pages: 7
- PDF: https://openairdocs.org/files/sha256/56/5f/565f7fccc5d31bb3446ff005e33a5c06367a19e92f435775620512409041c961
- Page: https://openairdocs.org/service-documents/engine-alliance/gp7200-72-0399/file/565f7fccc5d3

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

E
SERVICE BULLETIN
ENGINE — HIGH PRESSURE TURBINE (HPT) — REMOVAL OF THE HPT STATOR CASE
FROM SERVICE
MODEL APPLICATION
GP7270, GP7272, GP7277
BULLETIN ISSUE SEQUENCE
EAGP7 Series 72-399
ATA NUMBER
72-51-30
ENGINE ALLIANCE, LLC. PROPRIETARY INFORMATION
The information contained in this document is Engine Alliance, LLC (“EA”) Proprietary Information
and is disclosed in con ﬁdence. It is the property of EA and shall not be used, disclosed to others or
reproduced for any purpose, including, without limitation, to design, manufacture or repair parts
or to obtain FAA or other government approval to do so, without the express written consent of
EA. Neither receipt nor possession of this document alone, from any source, constitutes such
permission. Unauthorized possession, use, copying or disclosure may result in criminal and/or civil
liability. If consent is given for reproduction in whole or in part, this notice and the notice set forth on
each page of this document shall appear in any such reproduction in whole or in part.
This technical data is considered subject to the Ex port Administration Regulations (EAR) pursuant
to 15 CFR Parts 730-774 respectively. Transfer of this data by any means to a Non-US Person,
whether in the United States or abroad, without the proper U.S. Government authorization (i.e.
export license, license exception, NLR), is strictly prohibited.
EAR Export Classi ﬁcation: ECCN 9E991
Compliance Category
2
EA Distribution Code
2686
June 04/18 EAGP7-72-399
P a g e1o f 7

### Page 2

E
Summary
The purpose of this Service Bulletin is to remove from service the HPT stator case PN 2060M40G02
or PN 2137M29G01 that has reduced material capability in general areas.
PLANNING INFORMATION
Effectivity Data
Engine Models Applicable
GP7270, GP7272, GP7277
Engine Serial Nos. — Engines that have an HPT stator case PN 2060M40G02* or
PN 2137M29G01 with one of the serial numbers listed in T able 1 below:
Serial Number Serial Number Serial Number
FDBF6879 FDBG5395 FDBG9124
FDBG0248 FDBG5526 FDBG9848
FDBG1088 FDBG5861 FDBG9922
FDBG2326 FDBG6774 FDBK0012
FDBG3216 FDBG9058 --
*If Service Bulletin No. EAGP7-72-348, Reference 4 has been complied with, the
part number may have been changed to PN 2137M29G01.
NOTE: The engine serial number effectivity data and its related engine model
identiﬁcation contained in this Service Bulletin are taken from the records of
the part(s) incorporation during initial manufacture.
Concurrent Requirements
There are no concurrent requirements.
Reason
1. Problem:
The affected HPT stator cases have been identi ﬁed with a reduced material
capability at an unspeci ﬁed location. This condition may not allow the part to
reach the ultimate life objective of the HPT stator case.
2. Cause:
The area of the reduced material capability reduces the fatigue life of the
HPT stator case.
3. Solution:
Remove and replace the affected HPT stator cases.
June 04/18 EAGP7-72-399
Page 2
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictions on the cover or ﬁrst page.

### Page 3

E
Description
Remove and replace the affected HPT stator cases.
This recommendation is to address a condition that may affect Flight Safety.
Compliance
Category 2
EA recommends you do this Service Bulletin as soon as possible based on the
current HPT stator case's part cycles since new (PCSN) or part cycles since
overhaul (PCSO), whichever is lower, but without effect on revenue service per the
following criteria:
– For HPT stator cases with PCSN or PCSO between 0 to 1,000 cycles, remove
the HPT stator case in the next 150 cycles.
– For HPT stator cases with PCSN or PCSO between 1,001 to 2,000 cycles,
remove the HPT stator case in the next 125 cycles.
– For HPT stator cases with PCSN or PCSO between 2,001 to 3,000 cycles,
remove the HPT stator case in the 100 cycles.
– For HPT stator cases with PCSN or PCSO between 3,001 to 4,000 cycles,
remove the HPT stator case in the next 75 cycles.
– For HPT stator cases with PCSN or PCSO between 4,001 to 5,000 cycles,
remove the HPT stator case in the next 50 cycles.
– For HPT stator cases with PCSN or PCSO with more than 5,001 cycles, remove
the HPT stator case in the next 25 cycles.
NOTE: For this Service Bulletin, an HPT stator case that has had a piece-part
inspection, as speci ﬁed in the Cleaning, Inspection, and Repair (CIR)
Manual, Chapter/Section 72-51-31, INSPECTION/CHECK-02, Reference 3,
can use the cycles since that inspection as PCSO.
Approval Data
The part number changes and/or part changes speci ﬁed in the Material Information
section and Accomplishment Instructions of this Service Bulletin agree with the
applicable Federal Aviation Regulations and are FAA-Approved for the engine
model(s) given.
The aircraft TC holder has been informed of this change.
Manpower
No more man-hours are necessary when done at complete disassembly/assembly.
Weight Data
No change.
June 04/18 EAGP7-72-399
Page 3
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictio ns on the cover or ﬁrst page.

### Page 4

E
Electrical Load Data
Not applicable.
Software Accomplishment Summary
Not applicable.
References
1. GP7000 Series, Illustrated Parts Catalog, Part No. 5700308.
2. GP7000 Series, Engine Manual, Part No. 5700147.
3. GP7000 Series, Engine Cleaning, Inspection, and Repair (CIR) Manual, Part
No. 5700309.
4. Service Bulletin No. EAGP7-72-348; ENGINE ― HIGH PRESSURE
TURBINE (HPT) ― HPT STATOR CASE NEW PART NUMBER AND FIELD
REIDENTIFICATION.
Publications Changed
Not applicable.
Interchangeability
Not applicable.
Information in the Appendix
Alternate Accomplishment Instructions (No)
Progression Charts (No)
Added Data (Yes)
Revision to T able of Limits (No)
Inspection Procedures (No)
June 04/18 EAGP7-72-399
Page 4
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictions on the cover or ﬁrst page.

### Page 5

E
MATERIAL INFORMATION
Material — Cost and Availability
1. The estimated price of new material to do this Service Bulletin using new
replacement part is $339,400.00.
2. There is no kit provided to do this Service Bulletin.
3. Part availability information is provided in material data Instructions —
Disposition.
Industry Support Program
Contact your Customer Support Manager.
The material data that follows is for each engine.
NOTE: It is possible to use the Chapter/Section and Figure/Item reference number
shown below the old part number to ﬁnd the part in the Illustrated Parts
Catalog.
Because there are many different con ﬁgurations used, it is frequently
necessary to show more than one group of parts. When this occurs, parts
that are interchangeable are shown line-by-line only, unless this is shown
differently.
CAUTION: THE FOLLOWING MATERIAL DATA TABLE(S) ARE ORGANIZED BY
ILLUSTRATED PARTS CATALOG. ALL PARTS IN THE TABLE(S) MAY
OR MAY NOT BE APPLICABLE TO ALL THE ENGINE MODELS SHOWN
IN THE TABLE HEADING. YOU MUST REFER TO THE APPROPRIATE
ILLUSTRATED PARTS CATALOG FOR ENGINE MODEL APPLICABILITY
USING THE OLD PART NUMBER (PN) AND CATALOG SEQUENCE
NUMBER. FAILURE TO INSTALL THE PART(S) IN THE CORRECT
ENGINE MODEL MAY RESULT IN A CONFIGURATION THAT IS NOT FAA
APPROVED.
The material data that follows is for each engine.
For GP7270, GP7272, GP7277 Engines:
New PN Qty Estimate of Unit
Price ($)
Keyword Old PN Instructions
Disposition
The following part may be needed when accomplishing this Service Bulletin:
-- 1 339,400.00 CASE — HPT
STATOR
2060M40G02
(72-51-30-1-10)
(6)(E)
Modiﬁcation and Spares Information
Parts Modi ﬁcation Conditions
– (6) The old and new part numbers are the same.
Spare Parts Availability
June 04/18 EAGP7-72-399
Page 5
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictio ns on the cover or ﬁrst page.

### Page 6

E
– (E) The old part is an expendable item necessary to do this bulletin.
Material Data for Each Spare Engine
Not applicable.
Reidentiﬁed Parts
Not applicable.
Necessary Tools
No more Support Equipment is necessary.
Other Material Information Data
Not applicable.
June 04/18 EAGP7-72-399
Page 6
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictions on the cover or ﬁrst page.

### Page 7

E
ACCOMPLISHMENT INSTRUCTIONS
General
1. Remove and replace the affected HPT stator case as speci ﬁed in the
Engine Manual, Chapter/Section 72-51-3 0, DISASSEMBLY-03, Reference 2.
Removal instructions have not changed.
NOTE: The removed HPT stator case can be held/stored for a future potential
corrective action rework, modi ﬁcation, or inspection.
2. Install a new or serviceable HPT stator case into the engine as speci ﬁed in
the Engine Manual, Chapter/Section 72-51-30, ASSEMBLY-01, Reference 2.
Installation instructions have not changed.
3. T ell EA through GE Aviation Fleet Support that the affected HPT stator case
was removed:
GE Aviation Fleet Support
T oll Free Phone: 1-877-432-3272
Phone: (513) 552-3272
Fax: 1-877-432-3329
E-mail: aviation. ﬂeetsupport@ge.com
Web Site: https://www.geaviation.com/support
A. Include the HPT stator case part number, serial number, part time,
cycles since new (CSN), and date of removal.
ADDED DATA
Internal Reference Information
Revision No. ReferenceDocument Origination
Original EPEX: 76148 EAW
Original QEM: 58714-18-101 EAW
June 04/18 EAGP7-72-399
Page 7
ENGINE ALLIANCE, LLC PROPRIETARY INFORMATION
Subject to the restrictio ns on the cover or ﬁrst page.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
