# Fokker Service Bulletin SBF100-25-128: No revision named

- Rights: © Fokker. Filed by the FAA in regulations.gov docket FAA-2017-0906; AD 2018-07-21 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Fokker Service Bulletin SBF100-25-128](https://openairdocs.org/service-documents/fokker/sbf100-25-128.md)
- Title as filed: FAA-2017-0906_SBF100-25-128
- Pages: 17
- PDF: https://openairdocs.org/files/sha256/4f/87/4f873540ddca8d1595b695c5199330f736e1be16c4e64f5efcfeccfc17d737df
- Page: https://openairdocs.org/service-documents/fokker/sbf100-25-128/file/4f873540ddca

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin 
 Fokker Services B.V. 
 Prepared  Function / Note  Date 
    visser-mv02446     Jul 15/16 
 Colleague Check    
    hamers-jh01989     May 11/16 
 Manager Final Approval    
    benthem-eb01865     Jul 21/16 
 Office of Airworthiness Approval   
    visser-hv01800     Jul 21/16 
 
 
 
 
Status:  
Released 
Revision:  
- 
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the aforesaid agreement, is not  permitted except with 
the prior written permission of Fokker Services B.V. 
 
EASA approved procedure for electronic sign-off  
 
 
 
F100/70 Generic SB 
 
 
SBF100-25-128 
 
 
Revision - 
 
 
 
PASSENGER COMPARTMENT - PASSENGER AND ATTENDANT UTILITIES 
 
 
 
 
 
A One-time Inspection of the PSU Panels and the PSU Panel/Aircraft Interface 
Connectors

### Page 2

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
1. General Information 
A. General 
(1) Not applicable. 
 
 
 
 
Table of Contents 
 
 Section 1: General Information 
 Section 2: Planning Information 
 Section 3: Material Information 
 Section 4: Accomplishment Instructions  
 Service Bulletin Quality Reporting Form 
and attachments (if applicable): 
 List of drawings/parts lists  
 Parts List Local source (PLL)  
 Parts List Supply (PLS)  
 Required drawings 
B. Service Bulletin Revision History 
 
Revision Date (Mmm dd/yy) Reason for Revision 
- Refer to footer First Release 
 
 
 
 
PASSENGER COMPARTMENT - PASSENGER AND ATTENDANT UTILITIES 
 
A One-time Inspection of the PSU Panels and the PSU Panel/Aircraft Interface Connectors.

### Page 3

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
2. Planning Information 
A. Effectivity 
(1) F28 Mark 0100 aircraft serial number(s): 
11244 through 11520, 11522 through 11527 (except as identified in the NOTES 
below). 
NOTE 1: If your aircraft is post SBF100-25-070 (The Introduction of Jet Line 
Interior), this Service Bulletin is not applicable. 
 
NOTE 2: If your aircraft is post SBF100-25-109 (The Introduction of Future 
Interior), this Service Bulletin is not applicable. 
 
NOTE 3: If your aircraft with serial number 11359, 11361, 11367, 11396, 11397, 
11404, 11446, 11456, 11468, 11483, 11490, 11499, 11502, 11515 or 
11520 is post report FS-N545 or FS-N571, this Service Bulletin is not 
applicable. 
B. Concurrent Requirements 
(1) Not Applicable. 
C. Reason 
(1) Operators have, in the past, reported smoke in the passenger compartment during 
flight due to overheat of a Passenger Service Unit (PSU) panel. The overheat was 
caused by moisture ingress into the PSU/aircraft interface connector J1. Such 
moisture inside the connector causes corrosion on the contacts and as a result of 
that, the temperature inside the connector rises and subsequently the connector 
can melt and the PSU panel can be damaged. Such moisture could result from 
water condensation on air-conditioning ducting or exposed/not-insulated structure, 
and be ‘guided’ onto the PSU panels and/or into the J1 interface connector via the 
PSU panel wire loom. 
(2) In 2003 Fokker Services issued Service Bulletin SBF100-25-097 (Refer to 
Airworthiness Directive NL-2004-022). This SB introduced a modification of the 
PSU panels and PSU/aircraft interface connector J1. Sealant was applied to the 
connector and the PSU panel was modified (by application of sealant) according 
the vendor (Honeywell) Service Bulletin SB 10-1178-33-0040 and/or 10-1571-33-
0041. 
(3) In 2006 Fokker Services issued Service Bulletin SBF100-25-108 (Refer to 
Airworthiness Directive NL-2006-008). This SB introduced a one-time inspection of 
the PSU panel interface connectors. New gaskets where introduced inside PSU 
connectors J1 and J2.

### Page 4

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
(4) Recently one new case has been reported of burning smell and smoke in the 
passenger compartment during disembarking of the passengers. This case was 
also attributed to moisture ingress into the J1 interface connector of an 
unsealed/unmodified PSU panel. During investigation of several aircraft at multiple 
customers, discrepancies where discovered. 
(5) The instructions in this new Service Bulletin provide a one-time inspection of the 
correct accomplishment of the modifications of the PSU panels and PSU J1 and J2 
connectors. 
D. Description 
(1) This Service Bulletin tells you how to: 
- Inspect the installed sealant on the PSU panels and if necessary apply new 
sealant according to Vendor Service Bulletin Honeywell SB 10-1178-33-0040 
and/or 10-1571-33-0041. 
- Inspect the PSU panels to verify if the J1/P1 and J2/P2 Interface connectors 
can be properly locked and gaskets are present. 
- Inspect the installed sealant on the PSU J1 and J2 connectors and if 
necessary apply new sealant. 
E. Compliance 
(1) Recommended 
Fokker Services recommends the accomplishment of the Service Bulletin: 
Within 36 months after the date of issue of this Service Bulletin, but not later than 
within the compliance time defined in the AD (if applicable, see note below), which 
takes precedence over the recommendation by Fokker Services 
NOTE: It is expected that EASA will issue an Airworthiness Directive (AD) with 
respect to this subject with the same compliance terms. Refer to the 
EASA website for the publication of a (Proposed) Airworthiness Directive 
for comments. 
F. Approval 
(1) The technical content of this document is approved under the authority of DOA ref. 
EASA.21J.059.

### Page 5

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
G. Manpower 
(1) Approximately 13 man-hours are necessary to do this Service Bulletin on one 
aircraft.  
This table of manpower will help you to schedule and do this Service Bulletin: 
Elapsed time
(hours)
Removal 2 2,0 1,0
Modification
Inspection
Installation 2 6,0 3,0
Testing - - -
Total 13,0 6,5
2,5
Instructions Men Man-hours
2 5,0
 
NOTE: This estimate does not include the time necessary for the paint to dry 
and/or the sealant to cure.  
(2) The estimated hours are for direct labor done by experienced personnel. They are 
calculated based on the conditions given in SBF100-00-001 (Service Bulletin 
Introduction, section 2.C., “Manpower”). 
H. Weight and Balance 
(1) Weight change: None. 
Index change: None. 
I. Electrical Load Data 
(1) Direct Current (DC) Loads: 
(a) Not changed. 
(2) Alternating Current (AC) Loads: 
(a) Not changed. 
J. Software Accomplishment Summary 
(1) Not applicable.

### Page 6

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
K. References 
(1) Fokker 70/100 Aircraft Maintenance Manual (AMM) 
Fokker 70/100 Illustrated Parts Catalog (IPC) 
Fokker 70/100 Consumable Material List (CML) 
Fokker 70/100 Standard Process Manual (SPM) 
Fokker 70/100 Service Bulletin: 
- SBF100-25-070 
- SBF100-25-097 
- SBF100-25-108 
- SBF100-25-109. 
Fokker 70/100 Reports: 
- FS-N545 
- FS-N571. 
Fokker 70/100 Service Experience Digest (SED), subject 25-22/001 
Fokker internal reference: 
- ECR 95973. 
Honeywell Vendor Service Bulletin: 
- 10-1178-33-0040 and 
- 10-1571-33-0041. 
L. Publications Affected 
(1) This Service Bulletin Appendix affects the publications listed below: 
(a) Maintenance Documentation 
 
Not affected. 
(b) Maintenance Programs 
Not affected. 
(c) Special Instructions for Continued Airworthiness (ICA) 
The effect of this Service Bulletin on the special ICA is as follows:  
  YES NO 
- Electrical Wiring Interconnection System (EWIS) - X 
- Fokker 50/60 Airworthiness Limitations Section (ALS):   
  Fuel Tank Safety (FTS) - X 
  Damage Tolerance of Fatigue Critical Structure (FCS) - X 
  Certification Maintenance Requirements (CMR) - X 
NOTE: If “YES”, when not already incorporated, the changed ICA will be 
incorporated in the MRB, the Airworthiness Limitations Section (ALS) 
and/or the AMM document(s) within one calendar year from the date 
of issue of this Service Bulletin. Until then, no actions are required.

### Page 7

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
(d) Operational Documentation 
Not affected. 
(2) Report to Fokker Services that this Service Bulletin has been carried out on the 
applicable aircraft.  
(3) You have the possibility to send your SB feedback to Fokker Services per “Service 
Bulletin Reporting Quality Form”. This form is located on the last Service Bulletin 
page. 
(4) For incorporation of this Service Bulletin in your documentation refer to SBF100‑
00‑001 (Service Bulletin Introduction, section 4 “Incorporation of Service Bulletins 
in Documentation of Fokker Services”). 
M. Interchangeability or Intermixability of Parts 
(1) Not applicable.

### Page 8

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
3. Material Information 
A. Material – Price and Availability 
(1) The materials are local source items. 
B. Material Required 
(1) These parts, which are necessary to complete this Service Bulletin on 1 aircraft, 
are not part of the mod kit. 
 
New Part Number Qty Keyword Info Old Part 
Number 
Instructions/ 
Disposition 
- AR*1 Isopropyl alcohol Fk11-013*2 - Local source 
PR1930-2 AR*1 Sealant Fk09-025*2 - Local source 
JFP7010 AR*1 Promotor Fk09-004A*2 
(TH5.939/10). 
- Local source 
10-1624-1 AR*1 Kit, Gasket J1 & J2*3 - -  
F0N9-9504-1*4 AR*1 Placard (white) - - Local source 
 
NOTES: *1  Use as much as necessary 
*2 Refer to the CML for material numbers. 
*3 Both gaskets can be ordered separately as pn 60-4940-1 (J2) 
and pn 60-4940-3 (J1). 
*4 Or use an equivalent part number placard. 
 
C. Tooling – Price and Availability 
(1)  Not applicable. 
D. Tooling Required 
(1) Not applicable.

### Page 9

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
4. Accomplishment Instructions 
 
General: 
- In general, use (A)MM chapter 20, standard practices-airframe, as guide line for the 
aircraft modification. 
- Loosen the cable clamps where necessary. 
- Remove and discard the cable ties where necessary. 
- Remove and discard the lacing tape where necessary. 
- Use cable ties and lacing tape where necessary. 
- For CML material number references refer to “MyFokkerFleet.com > Documentation and 
select CML” and/or AMM chapter 20-30-00. 
- For Standards and Process Manual (SPM) references refer to “MyFokkerFleet.com > 
Documentation and select SPM”. 
- For the application of sealing compound refer to AMM chapter 20-32-00 and chapter 51-
23-00.  
WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY 
THE INSTRUCTIONS AND MANUFACTURER'S HEALTH AND SAFETY 
INSTRUCTIONS. 
A. Determine if the aircraft cabin is in a pre or post mod SBF100-25-070 or SBF100-25-
109 configuration. 
(1) If the aircraft cabin is in a post mod SBF100-25-070 or SBF100-25-109 
configuration, no further action is necessary. 
(2) If the aircraft cabin is in a pre mod SBF100-25-070 and SBF100-25-109 
configuration, continue with step B. 
 
NOTE: If it is not sure in which configuration the cabin is, continue with step B. 
B. Open all Passenger Service Unit (PSU) panels in the cabin. (Refer to the AMM, 
chapter 25-22-01). 
C. Determine each PSU partnumber. If the part number of all the PSU panels is pn 
676520X-XXX or pn A546011-XXX (vendor C & D Interiors), the cabin is in a post mod 
SBF100-25-070 or SBF100-25-109 configuration. Close all PSU panels. No further 
action is necessary. 
D. Inspection for the correct application of sealant on the PSU panels. 
 
WARNING: BE CAREFUL NOT TO BEND CONTACTS WHEN CLEANING THE 
RECEPTACLE. 
 
Refer to figures 1A and 1B and 2. 
(1) On the PSU panels, disconnect plug P1 and P2. 
(2) On the PSU panel, loosen the four screws and remove the Circuit Card Assembly 
(CCA) cover.

### Page 10

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
(3) Check the sealant on the PSU panel CCA is correctly applied refer to Vendor 
Honeywell SB 10-1178-33-040 or SB 10-1571-33-041 (see figure 1A and 1B for an 
example of the applied sealant around the connectors and the transformers). If 
correctly applied, continue with step (6). If not correctly applied (for example, see 
figure 2) continue with step (4). 
(4) Clean the PSU panel. Use: 
- AR isopropyl alcohol FK11-013.  
(5) Apply sealant on the PSU panel around the connectors and around the 
transformers (see figure 1A and 1B for an example and Vendor Honeywell SB 10-
1178-33-040 or SB 10-1571-33-041). Use: 
- AR sealant pn 3145.  
(6) On the PSU panel, install the CCA cover with the four screws. 
(7) Check the sealant on the PSU panel J2 connector is correctly applied refer to 
Vendor Honeywell CMM (see figure 5 for an example of correct application of the 
sealant). If correctly applied, continue with step E. If not correctly applied, refer to 
Vendor Honeywell PSU CMM’s for corrective actions. 
E. Inspect the PSU panels to verify if the J1/P1 and J2/P2 Interface connectors can be 
properly locked and gaskets are present. 
 
WARNING: BE CAREFUL NOT TO BEND CONTACTS WHEN CLEANING THE 
RECEPTACLE. 
Refer to figure 3 and figure 4. 
(1) Verification of the gaskets installed. 
(a) Verify that a gasket is installed in the J1 receptacle. If not, install a gasket. 
Use: 
 1 gasket (J1) pn 60-4940-3.  
(b) Verify that a gasket is installed in the J2 receptacle. If not, install a gasket. 
Use: 
 1 gasket (J2) pn 60-4940-1. 
(2) Verification of the proper locking of the J1/P1 PSU panel/Aircraft interface 
connector and J2/P2 PSU panel interface connector. 
(a) Connect Aircraft connector P1 to receptacle J1 and Panel connector P2 to 
receptacle J2. Verify that proper locking can be made. 
(b) If proper locking can be made proceed with step F.

### Page 11

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
(c) If proper locking cannot be made, verify if the J1 and / or J2 receptacle locking 
tabs are not deformed. If one or more locking tabs are deformed, remove PSU 
panel from aircraft and send it to an approved workshop for replacement of J1 
and /or J2 receptacle. Install a ‘new’ PSU panel and continue with step F. 
(Refer to the AMM 25-22-01-400-814-A). 
 
NOTE: Perform the after installation test for all PSU panels during step I. 
(d) If the locking tabs are not deformed, replace the gasket in the J1 and / or J2 
receptacle. Use: 
- 1 gasket (J2) pn 60-4940-1  
- 1 gasket (J1) pn 60-4940-3.  
(e) Verify, with the new gasket installed, if the J1/P1 PSU panel / Aircraft interface 
connector and J2/P2 PSU panel interface connector can be properly locked. 
If not, check for other problems on the plug and/or receptacle. If necessary 
send the PSU panel to an approved workshop. 
F. Inspection for the correct application of sealant on the PSU panel/Aircraft interface 
connector. 
 
WARNING: BE CAREFUL NOT TO BEND CONTACTS WHEN CLEANING THE 
RECEPTACLE. 
 
Refer to figures 5 and 6. 
(1) Check, if the sealant on the PSU panel/aircraft interface (J1) connector is correctly 
applied (see figure 5 for an example of correct application of the sealant). 
(a) To identify if there is sufficient sealant applied, use a torch to shine a light back 
towards yourself inside the PSU panel/aircraft interface connector. 
(b) If the sealant is applied correctly, i.e. no light comes through the connector, 
then continue with step G. 
(c) If the sealant is NOT applied correctly (see figure 6 for an example of incorrect 
application of the sealant) continue with step (2). 
(2) Clean the plug and receptacle of the PSU panel/aircraft interface connector. Use: 
- AR isopropyl alcohol FK11-013.  
(3) Make sure the plug and receptacle are dry and apply sealant (potting) on the 
backside of the plug of the PSU panel/aircraft interface connector (see figure 5 for 
an example of correct application of the sealant, in order to prevent moisture 
entering the connector). Use: 
- AR promoter  pn JFP7010 Fk09-004A 
- AR sealant  pn PR1930-2 FK09-025. 
 
NOTE: For the application of the sealant, refer to the SPM, TH4.215.

### Page 12

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
Refer to figure 4. 
G. Identify the PSU panel. Clean surface and install placard. Use: 
- 1 placard (white) pn F0N9-9504-1.  
NOTE: Write down ‘POST SBF100-25-128’ on placard pn F0N9-9504-1 or equivalent. 
H. Close all the PSU panels, opened in step B. (Refer to the AMM 25-22-01-400-814-A). 
I. Perform the after installation test of all the PSU panels (Refer to the AMM 25-22-01-
400-814-A). 
J. Remove all tools, materials and equipment from the work area. Make sure that the area 
is clean.

### Page 13

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
 
Correct Application of Sealant on PSU Panel 
Figure 1A 
 
 
 
Correct Application of Sealant on PSU Panel (Yellow plastic is normally not present)  
Figure 1B

### Page 14

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
 
 
 
 
Incorrect Application of Sealant on PSU Panel 
Figure 2

### Page 15

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
PSU Panel Receptacle Layout 
Figure 3 
PSU Panel 
Figure 4

### Page 16

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
 
 
 
Correct Application of Sealant on J1 (LH) and J2 (RH) Interface Connector 
Figure 5 
 
 
 
Incorrect Application of Sealant on on J1 (RH) and J2 (LH) Interface Connector 
Figure 6

### Page 17

Service Bulletin Quality Reporting Form 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Jul 21/16 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-25-128 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its  customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained the rein for purposes other than explicitly allowed by the  aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 
SB Title: A One-time Inspection
  
 
Use this Service Bulletin Quality Reporting Form to tell us your perception of the quality of the Service 
Bulletin. The reported data that you provide to us will be used to analyze areas of difficulties and to take 
corrective actions to further improve the quality of our Service Bulletins. We thank you for the time you 
have taken in completing this form. 
 
* Rate the scale of 1 to 4, with 1 the lowest score and 4 the highest score. 
Chapters * 1 2 3 4 
a)  Quality rating of this SB (overall) □ □ □ □ 
b)  Quality rating of the Planning Information □ □ □ □ 
c)  Quality rating of the Material Information □ □ □ □ 
d)  Quality rating of the Accomplishment Instructions □ □ □ □ 
e)  Quality rating of the Test Instructions (if applicable) □ □ □ □ 
f)  Quality rating of the Illustrations or Drawings (if applicable) □ □ □ □ 
g)  Timely delivery of the SB □ □ □ □ 
 
If you have had difficulties with one of the chapters of this Service Bulletin and/or one of your rating(s) is 
lower than 3, please give a short description of the issue. 
 
Comments: 
 
 
 
 
 
 
 
 
 
 
 
 
 
Operator: Date: 
 
Name / Title:  
 
 
Please return this form to: Fokker Services B.V. 
Engineering, Quality Department 
P.O. Box 1357 
2130 EL Hoofddorp 
The Netherlands 
Fax: +31 (0) 88 6280111 or  E-mail: technicalservices@fokker.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
