# Fokker Service Bulletin SBF100-53-129: No revision named

- Rights: © Fokker. Filed by the FAA in regulations.gov docket FAA-2016-5035; AD 2016-19-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Fokker Service Bulletin SBF100-53-129](https://openairdocs.org/service-documents/fokker/sbf100-53-129.md)
- Title as filed: SBF100-53-129
- Pages: 25
- PDF: https://openairdocs.org/files/sha256/ff/45/ff45eaae854cf001702e24936a82d9dcbdcc65bc636d98c4794820084baaae67
- Page: https://openairdocs.org/service-documents/fokker/sbf100-53-129/file/ff45eaae854c

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin 
 Fokker Services B.V. 
 Prepared  Function / Note  Date 
    jeffrey.keetlaer     Feb 11/15 
 Colleague Check    
    doesburg-jd01812     Jan 28/15 
 Manager Final Approval    
    benthem-eb01865     Feb 13/15 
 Office of Airworthiness Approval   
    visser-hv01800     Feb 16/15 
 
 
 
 
Status:  
Released 
Revision:  
- 
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except with 
the prior written permission of Fokker Services B.V. 
 
EASA approved procedure for electronic sign-off  
 
 
 
F100/70 Generic SB 
 
 
SBF100-53-129 
 
 
Revision - 
 
 
 
FUSELAGE - CENTER FUSELAGE 
 
 
 
 
 
The Repair of the Skin Connection Angle and/or Pressure Bulkhead at Station 14911 
(12447), Stringer 67 (RH side)

### Page 2

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 1 of 21  
 
1. General Information  
A. General 
(1) Not applicable. 
B. Table of Contents 
 
• Section 1: General Information 
• Section 2: Planning Information 
• Section 3: Material Information 
• Section 4: Accomplishment Instructions  
• Service Bulletin Quality Reporting Form 
and attachments (if applicable): 
• List of drawings/parts lists  
• Parts List Local source (PLL)  
• Parts List Supply (PLS)  
• Required drawings 
C. Service Bulletin Revision History 
 
Revision Date (Mmm dd/yy) Reason for Revision 
- Refer to footer First Release

### Page 3

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 2 of 21  
 
2. Planning Information  
A. Effectivity 
(1) F28 Mark 0070/0100 aircraft serial numbers: 
11258, 11272 thru 11286, 11290, 11291, 11293, 11295, 11296, 11300, 11303,  
11306 thru 11308, 11310 thru 11316, 11318 and 11320 thru 11585. 
NOTE:  Aircraft serial numbers 11471 and 11502 have been repaired in  
  accordance with the instructions of CAS-38062, respectively CAS-41986, 
  and can be identified in the aircraft records as to comply with the repair 
  requirements of this Service Bulletin (SBF100-53-129).  
B. Concurrent Requirements 
(1) Not applicable. 
C. Reason 
(1) Service experience has shown that cracking can occur in the pressure bulkhead 
webplate and skin connection angle on the RH side at station 14911 (station 
12447 for F28 Mark 0070), stringer 67 of aircraft fuselage section 2 before the 
existing threshold per ALS task 533016-00-03 (F28 Mark 0100) or 533016-01-03 
(F28 Mark 0070). Therefore an additional one-time inspection has been introduced 
with SBF100-53-128. If cracks have occurred on the pressure bulkhead webplate 
and/or skin connection angle these can be repaired in accordance with this Service 
Bulletin (SBF100-53-129).     
D. Description 
(1) This Service Bulletin tells you how to: 
 
- Gain access to the aft side, forward side and outside of the pressure bulkhead 
webplate and skin connection angle 
- Remove the necessary parts  
- Repair the found cracks  
-  Reinstall the removed parts  
-  Close up the work area.

### Page 4

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 3 of 21  
 
E. Compliance 
(1) Optional 
Fokker Services recommends the accomplishment of the Service Bulletin in 
accordance with the instructions of SBF100-53-128. 
NOTE: Repair per this Service Bulletin SBF100-53-129 can also be incorporated 
as preventative modification. This will, however, not affect the ALS 
inspection interval. 
F. Approval 
(1) The technical content of this document is approved under the authority of DOA ref. 
EASA.21J.059. 
G. Manpower 
(1) Approximately 46 man-hours are necessa ry to do this Service Bulletin on one 
aircraft.  
This table of manpower will help you to schedule and do this Service Bulletin: 
Elapsed time
(hours)
Removal 1 6.0 6.0
Modification
Inspection
Installation 2 24.0 12.0
Testing - - -
Total 46.0 26.0
8.0
Instructions Men Man-hours
21 6 . 0
  
NOTE: This estimate does not include the time necessary for the paint to dry 
and/or the sealant to cure.  
(2) The estimated hours are for direct labor done by experienced personnel. They are 
calculated based on the conditions given in SBF100-00-001 (Service Bulletin 
Introduction, section 2.C., “Manpower”). 
H. Weight and Balance 
(1) Weight change: To be determined by weighing of the modkit (in kg). 
Index change: (-0.02421) x Weight change (in kg). 
Example:  3,00 kg weight change has an index change of -0.07263

### Page 5

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 4 of 21  
 
I. Electrical Load Data 
(1) Direct Current (DC) Loads: 
(a) Not changed. 
(2) Alternating Current (AC) Loads: 
(a) Not changed. 
J. Software Accomplishment Summary 
(1) Not applicable.

### Page 6

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 5 of 21  
 
K. References 
Fokker 70/100 Airworthiness Limitation Section (ALS) 
Fokker 70/100 Structural Repair Manual (SRM) 
Fokker Consumable Material List (CML) 
Fokker Standards & Process Manual (SPM) 
Fokker 70/100 Service Bulletin (SB): 
- SBF100-53-128 
Fokker internal reference: 
 - ECR 16144. 
L. Publications Affected 
(1) This Service Bulletin affects the publications listed below: 
(a) Maintenance Documentation  
 
- Fokker 70 Structural Repair Manual (SRM) - chapter 53-21 
- chapter 57-11 
-  Fokker 100 Structural Repair Manual (SRM) - chapter 53-31
- chapter 57-11 
(b) Maintenance Programs  
 
- Fokker 70/100 Maintenance Planning Document (MPD). 
(c) Special Instructions for Continued Airworthiness (ICA)  
The effect of this Service Bulletin on the special ICA is as follows:  
  YES NO 
- Electrical Wiring Interconnection System (EWIS) - X 
- Fokker 70/100 Airworthiness Limitations Section (ALS):   
 • Fuel Tank Safety (FTS) - X 
 • Damage Tolerance of Fatigue Critical Structure (FCS) X - 
 • Certification Maintenance Requirements (CMR) - X 
NOTE: If “YES”, when not already incorporated, the changed ICA will be 
incorporated in the MRB, the Airworthiness Limitations Section (ALS) 
and/or the AMM document(s) within one calendar year from the date 
of issue of this Service Bulletin. Until then, no actions are required. 
(d) Operational Documentation  
Not affected. 
(2) Report to Fokker Services that this Service Bulletin has been carried out on the 
applicable aircraft.  
(3) You have the possibility to send your SB feedback to Fokker Services per “Service 
Bulletin Reporting Quality Form”. This form is located on the last Service Bulletin 
page.

### Page 7

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 6 of 21  
 
(4) For incorporation of this Service Bulletin Appendix in your documentation refer to 
SBF100-00-001 (Service Bulletin Introduction, section 4 “Incorporation of Service 
Bulletins in Documentation of Fokker Services”). 
M. Interchangeability or Intermixability of Parts 
(1) Not applicable.

### Page 8

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 7 of 21  
 
3. Material Information  
A. Material – Price and Availability 
(1) You can order the necessary parts as mod kit SB10053129-XU-A.  
(2) You can contact your Fokker Services Customer Support Manager for the price 
and lead-time of this mod kit. 
B. Material Required 
(1) These parts, which are necessary to complete this Service Bulletin on 1 aircraft 
and are not part of the mod kit, are described in attachment Part List Local (PLL). 
Material List Description  Aircraft Effectivity  
SB10053129-XU-A Parts List Local (PLL) All 
(2) These mod kit parts, which are necessary to do this Service Bulletin on 1 aircraft, 
are described in attachment Part List Supply (PLS) 
Material List Description  Aircraft Effectivity  
SB10053129-XU-A Parts List Supply (PLS) All 
C. Tooling – Price and Availability 
(1)  Not applicable. 
D. Tooling Required 
(1) Not applicable.

### Page 9

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 8 of 21  
 
4. Accomplishment Instructions  
 
General: 
- In general, use (A)MM chapter 20, standard practices-airframe, as guide line for the 
aircraft modification. 
- Loosen the cable clamps where necessary. 
- Remove and discard the cable ties where necessary. 
- Use cable ties and lacing tape where necessary. 
- For CML material number references refer to “MyFokkerFleet.com > Documentation and 
select CML” and/or AMM chapter 20-30-00. 
- For Standards and Process Manual (SPM) references refer to “MyFokkerFleet.com > 
Documentation and select SPM”. 
- For drilling procedures refer to SRM chapter 51-22-01. 
- For the application of sealing compound refer to AMM chapter 20-32-00 and 
chapter 51-23-00.  
- For information on removal/installation of rivets refer to SRM chapter 51-40-02 and/or 
TH6.3002 (solid rivets) and SRM chapter 51-40-04 and/or SPM TH6.3106 (blind rivets). 
- For the installation of Hi-Lok bolts refer to SRM chapter 51-41-01 and/or SPM TH6.3403. 
- For the installation of bolts and screws refer to SRM chapter 51-43-01 and/or SPM 
TH6.3400. 
- For the application of Primer & Paint refer to the AMM chapter 51-21-00 and/or SPM 
TH6.7370. 
- For the application of Alodine refer to AMM chapter 51-22-00 and SRM chapter 51-24-01. 
WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY 
THE INSTRUCTIONS AND MANUFACTURER'S HEALTH AND SAFETY 
INSTRUCTIONS. 
A. Clear the area round the lower wing to fuselage section on the RH side.  
B. Open access panel 178BR. 
C. Remove the nose fairing assembly in accordance with AMM 53-63-00-000-824-A. 
D. Remove the rear wall panels in the forward cargo compartment; refer to 
AMM 25-51-00-000-824-A. 
Refer to figures 1, 2 and 3 
E. If necessary remove the bleed air duct in accordance with AMM 30-11-09-000-814-A to 
gain clearance at the aft side of the repair area.    
F. Disconnect the electrical wiring connector P1695B (zone 165) and remove the cable 
clamp and bracket.

### Page 10

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 9 of 21  
 
G. Remove the corresponding electrical wiring receptacle J1695A from the pressure 
bulkhead at station 14911 (12447) by removing the bolts, nuts and washers. 
Keep/discard:  
- 4 Bolts NAS600-5P Discard 
- 4  Washers AN960KD4L Keep 
- 4 Nuts MS21042L04. Keep 
H. Drill out the applicable fasteners and remove the stringer couplings. See figure 1. 
I. In case of a new crack, or one that has grown since repair postponement per SBF100-
53-128 step 4.F.(2), which has not yet been stop drilled, stop drill action must be 
accomplished now. For allowable crack length and stop drill requirements refer to 
SBF100-53-128.  
Refer to figures 5 and 6 
J. For installation of the external repair strip (in step Y. (1)), it is necessary to cut the 
fairing angle profile on which the nose fairing assembly is installed to the fuselage. 
(1) Drill out the applicable rivets, remove and keep the fairing profile connection 
angles.  
(2) Cut the angle next to the skin connection strip, see figure 6. Remove sharp edges 
and corners.  
K. Clean the area which requires to be repaired. Use:  
- AR Cleaning cloth Fk05-044  
- AR  Methyl Ethyl Ketone Fk11-003.  
Refer to figures 1 and 2 
L. Prepare the filler plate for installation. 
(1) Trim the filler plate as required with corresponding structure. Use:  
- 1 Filler plate p/n W31100-007.  
M. Prepare the pressure bulkhead repair plate for installation. 
(1) Trim the internal repair plate as required with corresponding structure. Use:  
- 1 Pressure bulkhead repair plate p/n W31100-005.  
N. Copy drill the existing solid fastener holes in the filler plate and pressure bulkhead 
repair plate.  
O. Determine the new solid rivet hole positi ons on the filler plate and pressure bulkhead 
repair plate in accordance with SRM 51-40-02 and drill the new fastener holes in 
accordance with SRM 51-22-01 to accommodate MS20470AD5 rivets. Figures 1 and 2 
show the rivet pattern, the precise pattern has to be determined in-situ.

### Page 11

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 10 of 21  
 
Refer to figures 2 and 3 
P. Prepare the first repair angle for installation. 
(1) Trim the repair angle to the proper length and shape as shown in figures 2 and 3. 
Use:  
- 1 First repair angle p/n W31100-001.  
Q. Prepare the second repair angle for installation. 
(1) Trim the repair angle to the proper length and shape as shown in figures 2 and 3. 
Use:  
- 1 Second repair angle p/n W31100-003.  
R. Copy drill the existing fastener holes from the vertical flange of the wing connection 
angle and pressure bulkhead into the repair parts in accordance with SRM 51-41-01 to 
accommodate first oversize Hi-Loks bolts p/n HL110VF6.  
S. Copy drill the existing fastener holes from  the fuselage skin into the repair angles in 
accordance with SRM 51-41-01 to accommodate Hi-Loks bolts p/n HL10VF6 and  
p/n HL11VF6.  
T. Prepare the stringer connection angles and shims for installation at stringer 67 and 68. 
(1) Copy drill the fastener holes from the fuselage skin and stringers into the stringer 
connection angles and shims. Use:  
- 2 Connection angle p/n W31100-009  
- 2 Connection angle p/n W31100-011  
- 2 Shims p/n W31100-013.  
Refer to figures 3 and 6 
U. Prepare the external repair strip for installation on the skin coupling.  
(1) Trim the repair strip to the proper length and shape as shown in figure 3. Use:  
- 1 External repair strip p/n W31100-015.  
(2) Copy drill the two aft existing fastener rows, corresponding with the fuselage skin 
and skin connection angle, into the repair part in accordance with SRM 51-41-01 to 
accommodate Hi-Loks bolts p/n HL10VF6 and one Hi-Lok bolt p/n HL11VF6. 
NOTE:  The two holes in the corner of the skin connection angle which attaches 
  the end of the fairing profile angle are left as is i.e. not to be copy drilled 
  and not to be plugged. Refer to figure 6.  
(3) Countersink one hole in the external repair strip to accommodate the Hi-Lok bolt 
p/n HL11VF6, which is located underneath the fairing profile angle.

### Page 12

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 11 of 21  
 
(4) Copy drill the forward two fastener rows from the fuselage skin coupling into the 
external repair strip in accordance with SRM 51-22-01 and SRM 51-41-01 to 
accommodate solid fasteners MS20470AD5, Hi-Loks bolts p/n HL10VF6 and one 
Hi-Lok bolt p/n HL11VF6. 
(5) Countersink the second hole in the external repair strip to accommodate the  
Hi-Lok bolt p/n HL11VF6.  
V. Locally manufacture a repair angle for the nose fairing connection angle, which has 
been cut off in step 4. J. Use the same flange dimensions as the original angle. Use:  
- AR Sheet p/n F0N1-4311-1AM- 
2024T3 (TH5.322) 1,4 mm. 
 
(1) Copy drill the holes into the repair angle except for the two outer fastener holes 
which are located near the corner of the skin connection angle. These two 
fasteners are omitted.  
W. Provide surface treatment to all bare material in accordance with SRM 51-24-01. Use:  
- AR Conversion coating Alodine 1201 Fk13-003D 
- AR Primer Aerodur S15/60 Fk07-008. 
Refer to figure 2 
X. Install the repair parts on the pressure bulkhead, see figure 2 
(1) Position and wet install the filler plate (p/n W31100-007) pressure bulkhead repair 
plate (p/n W31100-005), first repair angle (p/n W31100-001) and second repair 
angle (p/n W31100-003) at station 14911 (12447). Use: 
- 22 Hi-Lok collars p/n HL79-6  
- 2 First oversize Hi-Lok bolts p/n HL110VF6-5  
- 6 First oversize Hi-Lok bolts p/n HL110VF6-7  
- 7 First oversize Hi-Lok bolts p/n HL110VF6-8  
- 7 First oversize Hi-Lok bolts p/n HL110VF6-9  
- AR Solid rivets p/n MS20470AD5  
- AR Sealant p/n PR1782B  
- 1 First repair angle p/n W31100-001  
- 1 Second repair angle p/n W31100-003   
- 1 Pressure bulkhead repair 
plate 
p/n W31100-005  
- 1 Filler plate p/n W31100-007  
- AR Washer p/n NAS1149D0332K.  
NOTE:  In case a Hi-Lok bolt is too long, use one or two washers underneath the 
  collar per SRM 51-41-01 paragraph 7.

### Page 13

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 12 of 21  
 
Refer to figures 3, 4, 5, 6 and 7 
Y. Install the repair parts on the fuselage skin coupling, see figures 3 and 4 
(1) Position and wet install the external repair strip (p/n W31100-015), stringer 
connection angles (p/n W31100-009/-011), shims (p/n W31100-013 and p/n 
W31100-017 if required) and the locally fabricated fairing angle manufactured in 
step V. Use conical washers to fill the existing countersinking. Use: 
- 2 Conical washers p/n F0N18-9151R06  
- 32 Hi-Lok collars p/n HL70-6  
- 4 Hi-Lok bolts p/n HL10VF6-5  
- 8 Hi-Lok bolts p/n HL10VF6-6  
- 7 Hi-Lok bolts p/n HL10VF6-7  
- 11 Hi-Lok bolts p/n HL10VF6-8  
- 2 Hi-Lok bolts p/n HL11VF6-7  
- AR Solid rivets p/n MS20470AD5  
- AR Sealant p/n PR1782B  
- 2 Stringer connection angles p/n W31100-009  
- 2 Stringer connection angles p/n W31100-011  
- 2 Shims p/n W31100-013  
- 1 External repair strip p/n W31100-015  
- 2 Shims (if required) p/n W31100-017.  
(1) Reinstall the fairing profile connection angles which are removed and kept in step 
J.(1), see figures 5, 6 and 7. Use:  
- AR Solid rivets MS20470AD4.  
Refer to Aircraft Maintenance Manual (AMM) 
Z. Apply paint primer and a topcoat to the repair parts in accordance with AMM 51-21-00. 
Use:  
- AR Primer Aerodur S15/60 Fk07-008 
- AR  Topcoat Aerodur C21/100 Fk07-027. 
AA. Install the electrical wiring receptacle J1695A from the pressure bulkhead at 
station 14911 (12447). Use the nuts and washers which you kept in step G and new 
bolts. Use:  
- 4 Bolts p/n NAS600-6P.  
BB. Connect the electrical wiring connector P1695B (zone 165) and reinstall the cable 
clamp and bracket.  
(1) Perform the following after installation tests to ensure that disconnected electrical 
systems work properly, refer to AMM 28-21-01, 30-11-01, 30-11-02, 30-11-06 and 
30-11-08. 
CC. If removed in step G. install the bleed air duct in accordance with AMM 
30-11-09-400-814-A to restore the area in original condition.

### Page 14

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 13 of 21  
 
DD. Job close-up 
(1) Install the rear wall panels in the forward cargo compartment; refer to 
AMM 25-51-00-400-824-A. 
(2) Install the nose fairing assembly in accordance with AMM 53-63-00-400-824-A 
(3) Remove all tools, materials and equipment from the work area. Make sure that the 
area is clean. 
(4) Close access panel 178BR.

### Page 15

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 14 of 21  
 
 
NOTE: The shown picture is of an aircraft with integral center wing tank.  
  
Station 
14911 (F100) 
12447 (F70) 
External repair strip  
p/n W31100-015 Second repair angle  p/n W31100-003 
First repair angle  
p/n W31100-001 
Filler plate 
p/n W31100-007 
Pressure bulkhead  
repair plate  
p/n W31100-005 
Internal Repair Overview 
Figure 1 
Crack 
Remove and reinstall 
Z-profile

### Page 16

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 15 of 21  
 
 
 
 
 
 
 
  
Internal View of Repair on Pressure Bulkhead 
Figure 2 
MS20470AD5 rivets (new positions) 
MS20470AD5 rivets (existing positions), if 
necessary due to hole tolerance use next 
size MS20470DD6 rivets. 
HL110VF6 Hi-Loks (existing positions)  
Second repair angle  
p/n W31100-003 
Remove and reinstall 
Z-profile 
External repair strip  
p/n W31100-015 
First repair angle  
p/n W31100-001 
Filler plate 
p/n W31100-007 
Pressure bulkhead  
repair plate 
p/n W31100-005 
Crack

### Page 17

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 16 of 21  
 
 
 
 
 
  
External View of Repair on outer skin 
Figure 3 
HL11VF6 Hi-Lok bolts (existing positions)  
STGR 66 
STGR 67 
STGR 68 
STGR 69 
MS20470AD5 rivets (existing positions), if 
necessary due to hole tolerance use next 
size MS20470DD6 rivets. 
HL10VF6 Hi-Lok bolts (existing positions)  
External repair strip  
p/n W31100-015 
Stringer connection angle  
p/n W31100-009
Second repair angle  
p/n W31100-003 
First repair angle  
p/n W31100-001 
Shim  
p/n W31100-017 
Shim  
p/n W31100-013 
Stringer connection angle
p/n W31100-011 
View Z4

### Page 18

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 17 of 21  
 
 
 
 
 
 
 
 
 
 
 
 
  
Stringer Connection Angle Cross Section View 
Figure 4 
View Z4 
MS20470AD5 rivets (existing positions), if 
necessary due to hole tolerance use next 
size MS20470DD6 rivets.

### Page 19

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 18 of 21  
 
 
 
 
 
 
 
  
Detail see figure 6 
External View of Nose Fairing Angle 
Figure 5

### Page 20

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 19 of 21  
 
 
 
 
 
 
 
 
 
 
 
  
Skin connection 
angle cut line 
Remove this part of the 
skin connection angle 
 
Install repair angle 
External View of Nose Fairing Angle 
Figure 6 
Remove / reinstall 
connection angle 
Remove / reinstall 
connection angle 
Rivets not to 
be re-installed 
Drill out rivets of anchor nut angle 
(connection with skin angle) 
 
View A 
B 
B

### Page 21

Service Bulletin 
Fokker Services B.V. 
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 20 of 21  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Cross section B-B 
Repaired situation 
Anchor nut angle 
 
Repair angle 
 
External repair strip  
p/n W31100-015 
 
Skin 
Cross section B-B 
Original situation 
Anchor nut angle 
 
Original skin angle 
 
Skin 
Rivet  
p/n MS20470AD4 
Cross Section View of Nose Fairing Angle 
Figure 7

### Page 22

Service Bulletin Quality Reporting Form 
Fokker Services B.V. 
  
Status:  
Released 
Revision:  
-  
Released date: (Mmm dd/yy) 
Feb 16/15 
Security class:  
RESTRICTED 
F100/70 Generic SB no.: 
SBF100-53-129 
Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V . to its customers on a confidential basis subject to the provisions of an agreement. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained there in for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
 Page 21 of 21  
 
SB Title: The Repair of the Skin Connection Angle and/or Pressure Bulkhead at Station 14911 (12447), 
Stringer 67 (RH side) 
 
Use this Service Bulletin Quality Reporting Form to tell us your perception of the quality of the Service 
Bulletin. The reported data that you provide to us will be used to analyze areas of difficulties and to take 
corrective actions to further improve the quality of our Service Bulletins. We thank you for the time you 
have taken in completing this form. 
 
* Rate the scale of 1 to 4, with 1 the lowest score and 4 the highest score. 
Chapters * 1 2 3 4 
a)  Quality rating of this SB (overall) □ □ □ □ 
b)  Quality rating of the Planning Information □ □ □ □ 
c)  Quality rating of the Material Information □ □ □ □ 
d)  Quality rating of the Accomplishment Instructions □ □ □ □ 
e)  Quality rating of the Test Instructions (if applicable) □ □ □ □ 
f)  Quality rating of the Illust rations or Drawings (if applicable) □ □ □ □ 
g)  Timely delivery of the SB □ □ □ □ 
 
If you have had difficulties with one of the chapters of this Service Bulletin and/or one of your rating(s) is 
lower than 3, please give a short description of the issue. 
 
Comments: 
 
 
 
 
 
 
 
 
 
 
 
 
 
Operator: Date:  
 
Name / Title:  
 
 
Please return this form to: Fokker Services B.V. 
Engineering, Quality Department 
P.O. Box 1357 
2130 EL Hoofddorp 
The Netherlands 
Fax: +31 (0) 88 6280111 or E-mail: technicalservices@fokker.com

### Page 23

Copyright All rights reserved by Fokker Services B.V. (The Netherlands). This document has been supplied by Fokker Services B.V. to its customers on a confiden tial basis subject to the provisions of an agreemen t. 
Reproduction or disclosure to third parties of this document or any part thereof, or the use of any information contained therein for purposes other than explicitly allowed by the aforesaid agreement, is not permitted except 
with the prior written permission of Fokker Services B.V. 
   
 
 
Status:
Released
Revision:
-
Released date:
Feb 16/15
Security class:
RESTRICTED
F100/70 Generic SB no:
SBF100-53-129
Service Bulletin
Fokker Services B.V.
Page 1 of 1
List of Drawings / Parts Lists
Drawing Sheet Issue Title
SB10053129-XU-A PLL A Parts List Local (PLL) for SB10053129-XU-A
SB10053129-XU-A PLS A Parts List Supply (PLS) for SB10053129-XU-A

### Page 24

Fokker Services B.V. 
Parts List Supply (PLS) 
       
       
       
 
 
 
 
 
 
 
 
All rights reserved. Reproduction or disclosure to third parties of this document or any part thereof, or the use of any 
information contained therein for purpose other than provided for by this document, is not permitted without prior and 
express written permission of Fokker Services B.V. 
 
EASA approved procedure for electronic sign-off   temp. 9084 08-11  
 
 
Keyword : MATLIST
Description :
Program : F28
Rel. to EB/SB : SBF100-53-129
Rel. to EB/SB Issue : -
Part Release Date : 13-02-2015
Part : SB10053129-XU-A
Revision : A,5
Status : Released
Assembly
Part Number Rev Seq Keyword Description
SB10053129-XU-A A 5 MATLIST
Assembly Structure
Qty UoM Part Number Keyword Info Old Part Number Instructions/Disposition
2 ea F0N18-9151R06 WASHER - - -
4 ea HL10VF6-5 BOLT F0N2-1196-6-5 - -
8 ea HL10VF6-6 BOLT F0N2-1196-6-6 - -
7 ea HL10VF6-7 BOLT F0N2-1196-6-7 - -
11 ea HL10VF6-8 BOLT F0N2-1196-6-8 - -
2 ea HL110VF6-5 BOLT F0N18-1221-6-5 - -
6 ea HL110VF6-7 BOLT F0N18-1221-6-7 - -
7 ea HL110VF6-8 BOLT F0N18-1221-6-8 - -
7 ea HL110VF6-9 BOLT F0N18-1221-6-9 - -
2 ea HL11VF6-7 BOLT F0N2-1197-6-7 - -
32 ea HL70-6 COLLAR F0N2-1181-6 - -
22 ea HL79-6 COLLAR F0N18-2230-6 - -
4 ea NAS600-6P SCREW - - -
1 ea W31100-001 ANGLE - - -
1 ea W31100-003 ANGLE - - -
1 ea W31100-005 PLATE - - -
1 ea W31100-007 PLATE - - -
2 ea W31100-009 ANGLE - - -
2 ea W31100-011 ANGLE - - -
2 ea W31100-013 SHIM - - -
1 ea W31100-015 STRIP - - -
2 ea W31100-017 SHIM - - -
Page 1 of 1

### Page 25

Fokker Services B.V. 
Parts List Local (PLL) 
       
       
       
 
 
 
 
 
 
 
 
All rights reserved. Reproduction or disclosure to third parties of this document or any part thereof, or the use of any 
information contained therein for purpose other than provided for by this document, is not permitted without prior and 
express written permission of Fokker Services B.V. 
 
EASA approved procedure for electronic sign-off   temp. 9083 08-11  
 
 
Keyword : MATLIST
Description :
Program : F28
Rel. to EB/SB : SBF100-53-129
Rel. to EB/SB Issue : -
Part Release Date : 13-02-2015
Part : SB10053129-XU-A
Revision : A,5
Status : Released
Assembly
Part Number Rev Seq Keyword Description
SB10053129-XU-A A 5 MATLIST
Assembly Structure
Qty UoM Part Number Keyword Info Old Part Number Instructions/Disposition
AR 5-701-1 PRIMER - - Local Source
AR AL0DINE1201 COATING - - Local Source
AR C21-100-064095 ENAMEL - - Local Source
AR MS20470AD4 RIVET - - Local Source
AR MS20470AD5 RIVET - - Local Source
AR NAS1149D0332K WASHER - - Local Source
AR PR1782B1 SEALANT - - Local Source
Full Part Numbers
Part Number Full Part Number
AL0DINE1201 ALODINE1201
Page 1 of 1

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
