# General Electric Service Bulletin 72-A0034: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2024-0774, the docket of AD 2024-06-51. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin 72-A0034](https://openairdocs.org/service-documents/ge/72-a0034.md)
- Title as filed: General Electric Alert Service Bulletin CT7-2E1 SB 72-A0034
- Pages: 12
- PDF: https://openairdocs.org/files/sha256/62/9d/629d947601b62c63f93e2be928da3b8fa8a02886ad387735ece299cdb22c541e
- Page: https://openairdocs.org/service-documents/ge/72-a0034/file/629d947601b6

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
GE Designated: -CONFIDENTIAL-
The information contained in this document is GE proprietary information and is disclosed in
con¿dence. It is the property of GE and shall not be used, disclosed to others or reproduced
without the express written consent of GE, including, but without limitation, it is not to be used
in the creation, manufacture, development, or derivation of any repairs, modi¿cations, spare
parts, designs, or con¿guration changes or to obtain FAA or any other government or regula-
tory approval to do so. If consent is given for reproduction in whole or in part, this notice and the
notice set forth on each page of this document shall appear in any such reproduction in whole
or part.
This technical data is considered subject to the Export Administration Regulations (EAR) pur-
suant to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person,
whether in the United States or abroad, without the proper U.S. Government authorization
(e.g., License, exemption, NLR, etc.), is strictly prohibited.
Copyright (2024) General Electric Company, U.S.A.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 1 of 12

### Page 2

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
1. PLANNING INFORMATION
A. Effectivity
CT7-2E1
This Alert Service Bulletin is applicable to CT7-2E1 engine models with power
turbine (PT) drive shaft assembly part number (P/N) 5125T92G01 installed with less
than 100 hours-time since new (TSN) or 100 hours-time since replacement (TSR) of
the PT drive shaft assembly produced or made between 2020 and 2023.
The affected engine serial numbers (ESN) and PT drive shaft assembly serial
numbers (S/N) listed in this Alert Service Bulletin is the best available data.
See Appendix A, T able 1 for a list of applicable ESNs and PT drive shaft assembly
S/Ns.
B. Description
This Alert Service Bulletin provides instructions to remove the engine C-sump cover
and use an Ultrasonic T est (UT) Phase Array probe to inspect the PT drive shaft
assembly reference tube magnetic insert end braze joint.
C. Compliance
Category 1
GE recommends that you do this Alert Service Bulletin before subsequent Àight.
Non-passenger operation is allowed for repositioning the aircraft to a maintenance
facility if required.
Impact A
This recommendation is to address a condition that may affect Àight safety.
NOTE: This Alert Service Bulletin can be done on wing or in shop.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
This Alert Service Bulletin provides an inspection to verify the minimum
acceptable braze coverage on the PT drive shaft assembly reference tube
magnetic insert.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 2
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 3

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
(2) Condition:
Multiple PT drive shaft assemblies were shipped with inadequate braze
coverage on the end of the PT shaft reference tube magnetic insert joint.
(3) Cause:
Inadequate braze coverage within the torque reference tube magnetic insert
joint can become compromised leading to improper torque and speed
indications.
(4) Improvement:
Planning has been updated and UT Phase Array probe inspection has been
incorporated into the manufacturing process of the torque reference tube
assembly.
(5) Substantiation:
Substantiation is by analysis and ¿eld experience.
F. Approval
The data contained in this Alert Service Bulletin has been reviewed by the FAA or
authorized entity representing the FAA and the repair(s) and modi ¿cation(s) herein
comply with the applicable Aviation Regulations and are APPROVED for installation
in the model(s) listed in this Alert Service Bulletin.
G. Manpower
You will need approximately one man-hour to do this Alert Service Bulletin once the
area is exposed.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
CT7-2E1 Turboshaft Engine Service Record
FST-2572, Phase Array Ultrasonic Inspection Procedure
GEK 112043-02, CT7-2E Maintenance Manual (MM)
GEK 112044-02, CT7-2E Shop Manual (SM)
GEK 115715, CT7-E1 Illustrated Parts Catalog (IPC)
J. Publications Affected
None.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 3
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 4

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Alert Service Bulletin:
Part Number
Qty/
Eng Part Name
Unit ($)
Price
Pkg
Qty
Lead
Time
Days
4074T58P04
72-50-00-01-060A
(1) Packing,
Preformed
(SIN 91652)
Quote (-) Quote
J1400P011
72-50-00-01-060B
(Alt) Packing,
Preformed
(SIN 91652)
Quote (-) Quote
4074T58P09
72-50-00-01-070A
(1) Packing,
Preformed
(SIN 91650)
Quote (-) Quote
J1400P159
72-50-00-01-070B
(Alt) Packing,
Preformed
SIN 91650
Quote (-) Quote
(2) Other Spare Parts:
None.
(3) Consumables:
Code Number Description
C02-007 Assembly Fluid, Ultrachem No. 1
-- Oil, Engine
B. Industry Support Information
Not applicable.
C. Con¿guration Chart
Not applicable.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 4
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 5

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
D. Parts Disposition
See paragraph 3., A CCOMPLISHMENT INSTRUCTIONS.
E. Tooling - Price and Availability
Part Number Nomenclature
GE-FQAP-803 Ultrasonic Probe T est Kit
(Provided by GE Aerospace)
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
NOTE 1: This task can be performed on-wing with the exhaust center body frame and
C-sump housing removed.
NOTE 2: T o accomplish this inspection there must be access to the engine C-sump
heat shield to allow removal of the heat shield and the C-sump cover to
insert the Phase Array Probe (approximately 12.5 inches (318 mm)). The
inspection also requires power for an ultrasonic instrument (approximately
12 inches x 12 inches x 6 inches (305 mm x 305 mm x 152 mm)) which must
be visually observed by the inspector during the test and must be in close
proximity to the probe. This may require removal of the engine from the
aircraft in some installations. This inspection may also be carried out on an
engine stand or in an engine storage container with the lid removed.
NOTE 3: Review the engine log book for the installation time of the installed PT drive
shaft assembly P/N 5125T92G01. If the current operational time on the
part since installation is over 100 hours, compliance with this Alert Service
Bulletin is satis ¿ed. Go to paragraph 3.B.(3) and record compliance with this
Alert Service Bulletin. If the PT drive shaft assembly is less than 100 hours,
proceed with the remainder of this Alert Service Bulletin.
NOTE 4: This procedure gives instructions to remove the C-sump heat shield (01-020,
Figure 1) and C-sump cover (01-040) to inspect the magnetic insert braze
joint on the PT drive shaft assembly (01-070, Figure 2 and Figure 3).
(1) Remove the C-sump heat shield (01-020, Figure 1) and C-sump cover
(01-040). Refer to CT7-2E MM GEK 112043-02, 72-50-00, REMOVAL AND
INSTALLATION, TASK 72-50-00-400-801, paragraph 4.A..
NOTE: The UT Phase Array Probe inspection must be performed by a level 2
or 3 NDT ultrasonic inspector who has been trained by GE Aerospace.
(2) Following the GE proprietary inspection procedure FST-2572 - Phase Array
Ultrasonic Inspection Procedure for the torque reference tube, perform the
braze inspection to quantify the percentage of braze.
(a) If the percentage of braze is greater than or equal to 42%, the engine
may be returned to service.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 5
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 6

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
(b) If the percentage of braze is less than 42%, tag the engine as failed PT
shaft UT inspection and return the engine or PT module to an MRO
shop for repair or replacement of the PT drive shaft assembly.
(3) Once the inspection is completed, re-install the C-sump cover (01-040, Figure
1) and C-sump heat shield (01-020). Refer to CT7-2E MM GEK 112043-02,
72-50-00, REMOVAL AND INSTALLATION, TASK 72-50-00-400-801,
paragraph 4.B.(3)
(4) For installed engines that have passed inspection, perform required
checks. Refer to CT7-2E MM GEK 112043-02, 72-00-00, TEST , TASK
72-00-00-760-803, paragraph 4 (Checkout Procedure After Replacement of
Parts), paragraph 6.D. (Idle Speed Leakage Check), and paragraph 7.B. (Oil
Consumption Check).
(5) For spare engines at the operator that have passed inspection, perform the
following:
(a) Go to paragraph 3.B., C ompliance as the inspection will meet the
intent of this Alert Service Bulletin. When the engine is installed in
an aircraft, perform the required checks. Refer to CT7-2E MM GEK
112043-02, 72-00-00, TEST , TASK 72-00-00-760-803, paragraph
6.C. (Functional T est Procedures for Newly Installed Engines and
Component Replacement (includes Idle Speed Leakage Check)) and
paragraph 7.B. (Oil Consumption Check).
(6) For engines and modules at an MRO facility that have passed inspection,
perform the following:
(a) T est engines per CT7-2E SM GEK 112044-02, 72-00-00, TESTING 006,
TASK 72-00-00-760-809 (Idle Speed Check) and 72-00-00, TESTING
011, TASK 72-00-00-760-814 (Oil Consumption Check).
(b) T est modules per CT7-2E SM GEK 112044-02, 72-00-00, TESTING
004, TASK 72-00-00-760-834 (EngineT est Requirements) (Engine Start,
Idle Speed Leakage, Transient, and Engine Shutdown Checks).
B. Compliance
(1) Record information in T able A.
(2) Provide copies of T able A and the GE UT inspection report to the GE Field
Service Representative and the Customer Representative.
(3) Record compliance of this Alert Service Bulletin in the appropriate CT7
Turboshaft Engine Service Record.
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 6
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 7

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
TABLE A - POWER TURBINE DRIVE SHAFT ASSEMBLY INSPECTION RESULTS
Engine or
PT Module
S/N (if
applicable)
PT Drive
Shaft
Assembly
P/N
PT Drive
Shaft
Assembly
S/N
PT Shaft
Time
Since New
(Hours)
PT Shaft
Time Since
Repair
(Hours)
%B r a z e
Coverage Date
Work Performed by (Print Name): Signature: Date:
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 7
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 8 (OCR)

GE
Aviation  CT7-2E1
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
C-SUMP
HOUSING
EXHAUST FRAME
OIL NOZZLE
(TYPICAL)
NO. 5
CARBON SEAL  00000
OIL NOZZLE
(TYPICAL)
PREFORMED
PACKING
(01-070)
NO. 6
BEARING
- 00-0  C-SUMP
COVER  G-SUMP
(01-040)  HEAT
SHIELD
NO. 5  (01-020)
BEARING  NO. 5 AND NO. 6
BEARING SUPPORT
NOTE:
ALL IPC REFERENCES ARE
FROM 72-50-00 UNLESS
SPECIFIED DIFFERENTLY.  6045825-00
C-Sump Heat Shield and C-Sump Cover - Removal and Installation
Figure 1
February 26, 2024  CT7-2E1 S/B 72-A0034
PAGE 8
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 9 (OCR)

GE
Aviation  CT7-2E1
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
REFERENCE
TABS
AFT END OF
POWER TURBINE
SHAFT
6045651-00
C-Sump and Aft End of Power Turbine Shafte
Figure 2
February 26, 2024  CT7-2E1 S/B 72-A0034
PAGE 9
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 10 (OCR)

GE
Aviation  CT7-2E1
ALERT SERVICE BULLETIN
ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
TORQUE
SENSOR TUBE
(01-120)
REAR INSERT
(01-110)
POWER
TURBINE SHAFT
(01-080)
PREFORMED
PACKING  FRONT INSERT  PIN
(01-060)  (01-100)  LOCKNUT  (01-090)
(01-040)
PIN
(01-090)  POWER TURBINE
DRIVE SHAFT ASSY
(01-070)
NOTE:
ALL IPC REFERENCES ARE
FROM 72-52-00 UNLESS
SPECIFIED DIFFERENTLY.  6045824-00
Power Turbine Drive Shaft Assembly
Figure 3
February 26, 2024  CT7-2E1 S/B 72-A0034
PAGE 10
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 11

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
4. APPENDIX A
TABLE 1 - LIST OF APPLICABLE CT7-2E1 ENGINE AND COMPONENT SERIAL NUMBERS
Component Nomenclature Part Number Engine Serial
Number
Component
Serial Number
Power Turbine Drive Shaft Assy 5125T92G01 780111 UNK
Power Turbine Drive Shaft Assy 5125T92G01 780132 UNK
Power Turbine Drive Shaft Assy 5125T92G01 780298 GATJA6W8
Power Turbine Drive Shaft Assy 5125T92G01 780307 GATJA0R4
Power Turbine Drive Shaft Assy 5125T92G01 780309 GATJA9LL
Power Turbine Drive Shaft Assy 5125T92G01 780310 GATJADNN
Power Turbine Drive Shaft Assy 5125T92G01 780311 GATJAE32
Power Turbine Drive Shaft Assy 5125T92G01 780312 GATJAF9W
Power Turbine Drive Shaft Assy 5125T92G01 780326 GATJAN5F
Power Turbine Drive Shaft Assy 5125T92G01 780338 GATJA9LH
Power Turbine Drive Shaft Assy 5125T92G01 780339 GATJC0M1
Power Turbine Drive Shaft Assy 5125T92G01 780342 GATJAPFA
Power Turbine Drive Shaft Assy 5125T92G01 780343 GATJC0T3
Power Turbine Drive Shaft Assy 5125T92G01 780344 GATJC22C
Power Turbine Drive Shaft Assy 5125T92G01 780345 GATJAWRD
Power Turbine Drive Shaft Assy 5125T92G01 780347 GATJC0TA
Power Turbine Drive Shaft Assy 5125T92G01 780349 GATJAT02
Power Turbine Drive Shaft Assy 5125T92G01 780350 GATJC4LW
Power Turbine Drive Shaft Assy 5125T92G01 780351 GATJC52M
Power Turbine Drive Shaft Assy 5125T92G01 780352 GATJC3E3
Power Turbine Drive Shaft Assy 5125T92G01 780353 GATJC5A7
Power Turbine Drive Shaft Assy 5125T92G01 780354 GATJC5W9
Power Turbine Drive Shaft Assy 5125T92G01 780355 GATJC69A
Power Turbine Drive Shaft Assy 5125T92G01 780356 GATJC6JF
Power Turbine Drive Shaft Assy 5125T92G01 780357 GATJC68W
Power Turbine Drive Shaft Assy 5125T92G01 780358 GATJC6FA
Power Turbine Drive Shaft Assy 5125T92G01 780359 GATJC6HM
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 11
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 12

ENGINE - Power Turbine Module (72-50-00) - Power Turbine Shaft/Torque Reference Tube
Magnetic Insert Braze Inspection
Component Nomenclature Part Number Engine Serial
Number
Component
Serial Number
Power Turbine Drive Shaft Assy 5125T92G01 780361 GATJC89G
Power Turbine Drive Shaft Assy 5125T92G01 780362 GATJC9A6
Power Turbine Drive Shaft Assy 5125T92G01 780363 GATJC9A3
Power Turbine Drive Shaft Assy 5125T92G01 780364 GATJC7WC
Power Turbine Drive Shaft Assy 5125T92G01 780365 GATJC8TP
Power Turbine Drive Shaft Assy 5125T92G01 780366 GATJC90P
Power Turbine Drive Shaft Assy 5125T92G01 780367 GATJCA4E
Power Turbine Drive Shaft Assy 5125T92G01 780368 GATJC3G2
Power Turbine Drive Shaft Assy 5125T92G01 780369 GATJC6JE
Power Turbine Drive Shaft Assy 5125T92G01 780370 GATJC1PP
Power Turbine Drive Shaft Assy 5125T92G01 780371 GATJC6W5
Power Turbine Drive Shaft Assy 5125T92G01 780372 GATJC90M
Power Turbine Drive Shaft Assy 5125T92G01 780373 GATJCALA
Power Turbine Drive Shaft Assy 5125T92G01 780374 GATJCAPR
Power Turbine Drive Shaft Assy 5125T92G01 780375 GATJC6HA
Power Turbine Drive Shaft Assy 5125T92G01 780376 GATJCCG6
Power Turbine Drive Shaft Assy 5125T92G01 780377 GATJCAPK
Power Turbine Drive Shaft Assy 5125T92G01 780378 GATJC90T
Power Turbine Drive Shaft Assy 5125T92G01 780379 GATJCAFK
Power Turbine Drive Shaft Assy 5125T92G01 780380 GATJCC35
Power Turbine Drive Shaft Assy 5125T92G01 780381 GATJCDHW
Power Turbine Drive Shaft Assy 5125T92G01 780382 GATJCEH8
Power Turbine Drive Shaft Assy 5125T92G01 780383 GATJCF59
Power Turbine Drive Shaft Assy 5125T92G01 780384 GATJCEPW
Power Turbine Drive Shaft Assy 5125T92G01 780385 GATJCEHC
February 26, 2024 CT7-2E1 S/B 72-A0034
PAGE 12
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
