# General Electric Service Bulletin 72-A0115: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2017-0164, the docket of AD 2017-17-18. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin 72-A0115](https://openairdocs.org/service-documents/ge/72-a0115.md)
- Title as filed: CF34-8E SB 72-A0115 R03
- Pages: 5
- PDF: https://openairdocs.org/files/sha256/92/4c/924cf361ad4a80081f7e4e0128c47a79fe9dcaaa0fba3bbade7605911f704dc8
- Page: https://openairdocs.org/service-documents/ge/72-a0115/file/924cf361ad4a

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CF34-8E Service Bulletins (SBs)
SB 72-A0115 R03 ENGINE - Fan Rotor Assembly (72-21-00) - Introduction of Fan Blade
Bushing Repair
Date Printed:
2016/12/19
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
1 of 5
CF34-8E ALERT SERVICE BULLETIN - 72- A0115 R03 Revised:12/09/2016
SB 72-A0115 R03 ENGINE - FAN ROTOR ASSEMBLY (72-21-00) -
INTRODUCTION OF FAN BLADE BUSHING REPAIR
Issued:
11/05/2010
GE PROPRIETARY INFORMATION
The information contained in this document is GE proprietary
information and is disclosed in confidence. It is the property of GE
and shall not be used, disclosed to others or reproduced without the
express written consent of GE, including, but without limitation, it is
not to be used in the creation, manufacture, development, or derivation
of any repairs, modifications, spare parts, designs, or configuration
changes or to obtain FAA or any other government or regulatory approval
to do so. If consent is given for reproduction in whole or in part,
this notice and the notice set forth on each page of this document
shall appear in any such reproduction in whole or in part.
This technical data is considered EAR controlled pursuant to 15 CFR
Parts 730-774 respectively. Transfer of this data by any means to a
Non-US Person, whether in the United States or abroad, without the
proper U.S. Government authorization (e.g., License, exemption, NLR,
etc.), is strictly prohibited.
Copyright (2016) General Electric Company, U.S.A.
TRANSMITTAL INFORMATION
REVISION 3 TO SERVICE BULLETIN 72-0115
Revision 3 is issued to update paragraphs 1.I.,  and 3., References
.ACCOMPLISHMENT INSTRUCTIONS
Revision 2 was issued June 15, 2016. Revision 1 was issued April 09,
2012. The original was issued November 05, 2010. Revision bars in the
left margin identify changes.
1. PLANNING INFORMATION
A. Effectivity
* * * CF34-8E2/8E2A1/8E5/8E6/8E5A1/8E5A2/8E6A1
This Service Bulletin is applicable to all CF34-8E engines.
There is no production introduction point for this hardware.
The fan blades P/N  are affected by this Service4114T15P02
Bulletin.
B. Description
This Service Bulletin introduces a fan blade bushing repair by a
controlled cold expansion process, approved by GE Aviation, that
extends the allowable fan blade operation by an additional 28,000
engine cycles from the time of the repair.
C. Compliance

### Page 2

CF34-8E Service Bulletins (SBs)
SB 72-A0115 R03 ENGINE - Fan Rotor Assembly (72-21-00) - Introduction of Fan Blade
Bushing Repair
Date Printed:
2016/12/19
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
2 of 5
Category 2
GE recommends that you do this Service Bulletin before the fan
blades accumulate 41,000 cycles since new (CSN).
NOTE:This Service Bulletin can be accomplished on wing or in shop.
NOTE:CF34-8CE S/B  is no longer required after completing this Service72-0060
Bulletin.
D. Concurrent Requirements
Do CF34-8E S/B 72-0118 when you do this Service Bulletin.
E. Reason
(1) Objective:
To introduce a repair procedure for the pin holes of the fan blade bushing.
The repair will allow the reuse of the fan blade(s) for an additional
28,000 maximum engine cycles of service limit from the time of the repair.
An unbushed fan blade can be repaired anytime up to the service time limit.
The fan blade(s) can also be repaired if the pin holes are found to be worn
up to the maximum repairable limit and within the allowable service limit
of the fan blade(s). After the reworked fan blade(s) accumulates 28,000
cycles, it needs to be removed and discarded.
(2) Condition:
On the issue date of this bulletin, a repair does not exist for fan blades
that have reached the maximum service time limit or pin hole wear limits.
Once the fan blade(s) allowable service limit is reached, the current
requirement is that they be either scrapped or continue service with the
ECI program as detailed in CF34-8E S/B  and CF34-8E Engine72-0060
Maintenance Program, Chapter 05-31-00. Similarly, if the pin hole
serviceable wear limits are reached, the current requirement is to scrap
the fan blade(s).
(3) Cause:
Fan blades that have reached the maximum allowable service limit, per
CF34-8E S/B  have been required to undergo ECI of pin holes every72-0060
1,500 to 3,000 cycles.
(4) Improvement:
The fan blade bushing repair extends the allowable fan blade operating
limits by an additional 28,000 engine cycles for the applicable engine
models per paragraph 1.A.,  from the time of the bushingEffectivity
repair. ECI of the fan blade pinholes per CF34-8E S/B  is no longer72-0060
required after completing the fan blade bushing repair.
(5) Substantiation:
Substantiation is by analysis and test.
F. Approval
This Service Bulletin has been reviewed by the FAA and the
repair(s) and modification(s) herein comply with the applicable
Federal Aviation Regulations and are FAA APPROVED for
installation in the model(s) listed in this Service Bulletin.
G. Manpower
The approximate time required to remove and install a fan blade
set is 4 man-hours.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
GEK 9250, Commercial Engine Standard Practices Manual (SPM)
GEK 112031, CF34-8E Engine Manual (EM)
GEK 112032, CF34-8E Illustrated Parts Catalog (IPC)
CF34-8E S/B , ENGINE - Fan Rotor Assembly (72-00-21) -72-0060
Inspection of Fan Blades
CF34-8E S/B , ENGINE - Fan Rotor Assembly and A-Sump72-0118

### Page 3

CF34-8E Service Bulletins (SBs)
SB 72-A0115 R03 ENGINE - Fan Rotor Assembly (72-21-00) - Introduction of Fan Blade
Bushing Repair
Date Printed:
2016/12/19
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
3 of 5
Components (72-21-00) - Introduction of Redesigned Fan Blade
Retaining Pin P/N 4114T06P03
Repair Document (RD) 830-623 (P2 or higher), Fan Rotor Assembly -
Fan Blade - Alteration - Tang Pinhold Bushing Installation
NOTE:The reference documents listed below are for the engine manufacturer's
internal use only:
CID: 891748
J. Publications Affected
GEK 112032, CF34-8E Illustrated Parts Catalog (IPC)
K. Interchangeability
The repaired fan blades (with bushing) P/N  are4114T31G01
interchangeable with fan blades P/N , only when the4114T15P02
repaired fan blades P/N  are used with solid fan blade4114T31G01
retaining pins P/N  and when the repaired fan blades4114T06P03
are installed in the fan rotor in pairs, 180 degrees apart. The
new solid fan retaining pin P/N  is introduced by4114T06P03
CF34-8E S/B .72-0118
NOTE:Do not install fan blades with bushings P/N  with hollow pins P/N 4114T31G01
 or P/N .4114T06P01 4114T06P02
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
(2) Other Spare Parts:
Part Number Qty/ Eng Part Name
Unit ($)
Price 
Pkg
Qty
Lead Time
Days
4114T06P03 (AR) Pin, Fan Blade
Retaining (Solid)
456.00 (1) 5
(3) Consumables:
None.
B. Industry Support Information
None.
C. Configuration Chart
New 
Part Number
Qty/
Eng Part Name
Old Part Number/
IPC Location
Qty/
Eng
Op
Code
Chg/
Sprt
Code
(FIELD ONLY)
4129T36G02/
G03
(X) Rotor Assembly,
Fan
(SIN 83000)
4129T36G02/
G03
(X) RM -/-
. *4114T31G01 (AR) Blade, Unbushed
Fan
(SIN 83100)
(Old Name)
Blade, Bushed Fan
(SIN 830A0)
(New Name)
.  4114T15P02
 05-070,72-21-00
(28) RW/RI 5/-
*Part not provisioned by GE.
Operation Codes
RI=Reidentify
RM=Remains

### Page 4

CF34-8E Service Bulletins (SBs)
SB 72-A0115 R03 ENGINE - Fan Rotor Assembly (72-21-00) - Introduction of Fan Blade
Bushing Repair
Date Printed:
2016/12/19
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
4 of 5
RW=Rework
Change Codes
5=Qualified interchangeability. Refer to paragraph 1.K., 
.Interchangeability
Support Codes
None.
D. Parts Disposition
None.
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
(1) Remove the affected fan blades  Refer to GEK 112031,(1, Figure 1).
72-00-21, REMOVAL.
(2) Send the removed fan blades  to an approved repaired source(1, Figure 1)
to be reworked per RD 830-623. Refer to the APPROVAL OF REWORK SOURCES
NOTICE below for contact information.
NOTICE
APPROVAL OF REWORK SOURCES
The repair referred to above contains complex processes that could affect
engine reliability and/or performance. Therefore it is necessary to
substantiate the ability and adequacy of a repair source to successfully
accomplish the repair. A Technical License Agreement is also required.
Information concerning a Technical License Agreement is available from:
ATTN.: Manager, Technical Licensing
GE Aviation
One Neumann Way, M/D RM100
Cincinnati, Ohio 45215-6301
U.S.A.
After the repair source has a Technical License Agreement, the Repair Document
and the Repair Source Substantiation requirements may be obtained from:
ATTN.: Repair Substantiation
GE Aviation
One Neumann Way, M/D S171
Cincinnati, Ohio 45215-6301
U.S.A.
OR
Phone: (513) 552-9563
(3) Install the reworked fan blades  Refer to GEK 112031,(1, Figure 1).
72-00-21, INSTALLATION.
(4) After you comply with this Service Bulletin, do as follows:
(a) Once the reworked fan blades  reach 28,000 engine cycles(1, Figure 1)
since fan blade bushing repair, replace it as follows:
1 Remove the affected reworked fan blades  Refer to(1, Figure 1).
GEK 112031, 72-00-21, REMOVAL.
2 Discard the removed reworked fan blades (1, Figure 1).
3 Install new fan blades (1) of the same part number (P/N ).4114T15P02
Refer to GEK 112031, 72-00-21, INSTALLATION.

### Page 5 (OCR)

CF34-8E Service Bulletins (SBS)
SB 72-A0115 R03 ENGINE - Fan Rotor Assembly (72-21-00) - Introduction of Fan Blade
Bushing Repair
FAN DISK
LEGEND:
1. FAN BLADE
REPLACE OLD PART WITH
P/N 4114T31G01  5033960-00
Fan Blade Location
Figure 1
GE PROPRIETARY INFORMATION - Subject to the restrictions on the media.
GE  PROPRIETARY INFORMATION - Not to be used, disclosed to
Date Printed:  2016/12/19  others or reproduced without the express written consent of  transfer of this data to a Non-US Person, without USG  GE. Technical data is considered ITAR and/or EAR controlled;  5 of 5  Page
authorization, is strictly prohibited.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
