# General Electric Service Bulletin GEnx-1B 72-0515: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2023-0663; AD 2023-17-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin GEnx-1B 72-0515](https://openairdocs.org/service-documents/ge/genx1b-72-0515.md)
- Title as filed: GE GEnx-1B Service Bulletin 72-0515 R00
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/7b/82/7b82142be91cb9684fae61e58dd4c4c906e5bbeaf669bda321668e5921e700a6
- Page: https://openairdocs.org/service-documents/ge/genx1b-72-0515/file/7b82142be91c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

GEnx-1B Service Bulletins (SBs)
SB 72-0515 R00 ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
Date Printed:
2023/02/22
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
1 of 6
GEnx-1B SERVICE BULLETIN - 72-0515 R00 Revised:01/31/2023
SB 72-0515 R00 ENGINE - GENERAL (72-00-00) - REMOVAL OF FORWARD SEAL AND
STAGES 6-10 COMPRESSOR ROTOR SPOOL FROM SERVICE
Issued:
01/31/2023
GE Designated: -CONFIDENTIAL-
The information contained in this document is GE proprietary information and is
disclosed in confidence. It is the property of GE and shall not be used, disclosed to
others or reproduced without the express written consent of GE, including, but without
limitation, it is not to be used in the creation, manufacture, development, or
derivation of any repairs, modifications, spare parts, designs, or configuration
changes or to obtain FAA or any other government or regulatory approval to do so. If
consent is given for reproduction in whole or in part, this notice and the notice set
forth on each page of this document shall appear in any such reproduction in whole or
part.
This technical data is considered subject to the Export Administration Regulations
(EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a
Non-U.S. Person, whether in the United States or abroad, without the proper U.S.
Government authorization (e.g., License, exemption, NLR, etc.), is strictly
prohibited.
Copyright (2023) General Electric Company, U.S.A.
1. PLANNING INFORMATION
A. Effectivity
* * * GEnx-1B64/P2, -1B67/P2, -1B70/75/P2, -1B70/P2, -1B70C/P2, -1B74/75/P2, -1B76/P2, -1B76A/P2
This Service Bulletin is applicable to these GEnx-1B engines:
*GEnx-1B engines that have any of the affected forward seal P/N  or P/N 2417M60P02 2417M60P03
and/or stages 6-10 compressor rotor spool P/N  with a serial number listed in2628M56G01
paragraph 4., , Table 1 or Table 2 installed.APPENDIX - A
The forward seals P/N  and P/N  and stages 6-10 compressor2417M60P02 2417M60P03
rotor spool P/N  with a serial number listed in paragraph 4., 2628M56G01
, Table 1 or Table 2 are affected by this Service Bulletin.APPENDIX - A
B. Description
This Service Bulletin provides instructions to remove and replace the affected
forward seal and stages 6-10 compressor rotor spool.
C. Compliance
Category 2
GE recommends that you do this Service Bulletin at the next piece-part exposure
of the affected forward seal and stages 6-10 compressor rotor spool, but before
the affected parts reach the cyclic removal threshold listed in paragraph 4., 
, Table 1 and Table 2.APPENDIX - A
Impact A
This recommendation is to address a condition that may affect Flight Safety.
NOTE:This Service Bulletin can be done in shop.
This Service Bulletin is offered to improve the reliability or performance of
your GE product, or to help prevent the occurrence of the event or condition
described in this Service Bulletin. If the operator elects not to participate
in the bulletin, that decision will be taken into consideration by GE in
evaluating future product performance issues that may arise in the operator's
fleet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
To remove parts from service.

### Page 2

GEnx-1B Service Bulletins (SBs)
SB 72-0515 R00 ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
Date Printed:
2023/02/22
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
2 of 6
(2) Condition:
The affected forward seals and stages 6-10 compressor rotor spools listed in paragraph 4., 
, Table 1 and Table 2, were made from the billets, which were included in aAPPENDIX - A
material anomaly population. This condition may not allow the affected forward seals and
stages 6-10 compressor rotor spools to reach their ultimate life objective.
(3) Cause:
The potential reduced material capability may decrease fatigue life of the affected forward
seals and stages 6-10 compressor rotor spools.
(4) Improvement:
The affected forward seals and stages 6-10 compressor rotor spools will be removed from
service.
(5) Substantiation:
Substantiation is by analysis.
F. Approval
The data contained in this Service Bulletin has been reviewed by the FAA or
authorized entity representing the FAA and the repair(s) and modification(s)
herein comply with the applicable Aviation Regulations and are APPROVED for
installation in the model(s) listed in this Service Bulletin.
G. Manpower
No additional man-hours are required to comply with this Service Bulletin.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
GEK 112851, GEnx-1B Engine Manual (EM)
GEK 112864, GEnx-1B Engine Illustrated Parts Catalog (EIPC)
J. Publications Affected
None.
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
(2) Other Spare Parts:
Part Number Qty/ Eng Part Name
Unit ($)
Price Pkg Qty
Lead Time
Days
2417M60P03 (1) Seal, Forward Quote (-) --
AND/OR
2628M56G02 (1) Spool, Stages 6-10
Compressor Rotor
Quote (-) --
NOTE:Prices are found in the GE Materials Catalog.
(3) Consumables:
None.
B. Industry Support Information
None.
C. Configuration Chart
None.
D. Parts Disposition
Discard old parts.
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. Removal of the Forward Seal
(1) Remove the affected forward seal ( Removal instructions have not changed. ReferFigure 1). 
to the GEnx-1B EM, 72-53-00, DISASSEMBLY 001, CONFIG 02.
B. Installation of the Forward Seal
(1) Install a new or serviceable forward seal (  Installation instructions have notFigure 1).
changed. Refer to the GEnx-1B EM, 72-53-00, ASSEMBLY 001, CONFIG 02.
C. Removal of the Stages 6-10 Compressor Rotor Spool
(1) Remove the affected stages 6-10 compressor rotor spool (  Removal instructionsFigure 2).
have not changed. Refer to the GEnx-1B EM, 72-31-00, DISASSEMBLY 001.

### Page 3 (OCR)

GEnx-1B Service Bulletins (SBS)
SB 72-0515 R00 ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
D. Installation of the Stages 6-10 Compressor Rotor Spool
(1) Install a new or serviceable stages 6-10 compressor rotor spool (Figure 2). Installation
instructions have not changed. Refer to the GEnx-1B EM, 72-31-00, ASSEMBLY 001, CONFIG 02.
E. Reporting
(1) Let GE Aviation know through GE Aviation Fleet Support that the affected forward seal (
Figure 1) and/or stages 6-10 compressor rotor spool (Figure 2) were removed at:
GE Aviation Fleet Support
Tol1-Free Phone: 1-877-432-3272
Phone: (513) 552-3272
E-mail: aviation.fleetsupport@ge.com
web Site: https://www.geaviation.com/support
HPT ROTOR STAGE 2 DISK
HPT ROTOR STAGE 1 DISK
FORWARD SEAL
6036089-00
Forward Seal Location
Figure 1
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
Date Printed:  reproduced without the express written consent of GE. Technical data  Page
2023/02/22  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  3 Of 6
Person, without USG authorization, is strictly prohibited.

### Page 4 (OCR)

GEnx-1B Service Bulletins (SBS)
SB 72-0515 R0O ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
6036090-00
Stages 6-10 Compressor Rotor Spool Location
Figure 2
4.  APPENDIX - A
Table 1. Affected Stages 6-10 Compressor Rotor Spool P/N 2628M56G01
Cyclic Removal  Cyclic Removal
Threshold  Threshold  Cyclic Removal
-1B64/P2,  -1B70/75/P2,  Threshold
Part Serial  Engine Serial  -1B67/P2,  • 1B70C/P2,  -1B76/P2  Cyclic Removal
Number  Number*  -1B70/P2  - 1B74/75/P2  - 1B76A/P'  Threshold -2B67/P
GWN10PM9  959-648  6,200  5,200  4,900  6,300
GWN10PMA  956-840  6,200  5,200  4,900  6,300
GWN10PMR  956-845  6,200  5,200  4,900  6,300
GWN10R87  956-859  6,200  5,200  4,900  6,300
GWN1ORNH  956-856  6,400  5,300  4,900  6,400
GWN10RP3  956-860  6,400  5,300  4,900  6,400
GWN1ORRJ  956-857  6,200  5,200  4,900  6,300
GWN10T1J  956-868  6,400  5,300  4,900  6,400
GWN10T5W  959-646  6,400  5,300  4,900  6,400
PROPRIETARY INFORMATION - Not to be used, disclosed to others
Date Printed:  reproduced without the express written consent of GE. Technical data  Page
2023/02/22  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  4 of 6
Person, without USG authorization, is strictly prohibited.

### Page 5

GEnx-1B Service Bulletins (SBs)
SB 72-0515 R00 ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
Date Printed:
2023/02/22
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
5 of 6
GWN10T60 956-864 6,400 5,300 4,900 6,400
GWN10T6R 956-142 6,400 5,300 4,900 6,400
GWN10T7K 959-649 6,400 5,300 4,900 6,400
GWN10T7R 956-861 6,400 5,300 4,900 6,400
GWN10T8R 956-863 6,400 5,300 4,900 6,400
GWN10T92 959-115 6,400 5,300 4,900 6,400
GWN10TDR 956-234 6,400 5,300 4,900 6,400
GWN10TEM 956-862 6,200 5,200 4,900 6,300
GWN10TEN 956-904 6,400 5,300 4,900 6,400
GWN10TG4 959-140 6,400 5,300 4,900 6,400
GWN10TL1 959-650 6,200 5,200 4,900 6,300
GWN10TTF 956-867 6,400 5,300 4,900 6,400
GWN10TW2 956-866 6,200 5,200 4,900 6,300
GWN10TWG 959-652 6,400 5,300 4,900 6,400
GWN10W8C 956-877 6,400 5,300 4,900 6,400
GWN10W9R 956-892 6,200 5,200 4,900 6,300
GWN10WND 959-121 6,200 5,200 4,900 6,300
GWN10WRD** 959-655 6,200 5,200 4,900 6,300
GWN11064 956-885 6,200 5,200 4,900 6,300
GWN11132 956-884 6,200 5,200 4,900 6,300
GWN11AMP 956-978 6,400 5,300 4,900 6,400
GWN11AWD 956-982 6,200 5,200 4,900 6,300
GWN11C87** 956-984 6,400 5,300 4,900 6,400
GWN11CLM 956-985 6,200 5,200 4,900 6,300
GWN11CN5** 959-137 6,200 5,200 4,900 6,300
GWN11DA9 956-995 6,400 5,300 4,900 6,400
GWN11F6J** 958-024 6,400 5,300 4,900 6,400
GWN11FTW 958-023 6,400 5,300 4,900 6,400
GWN1212H** 959-710 6,400 5,300 4,900 6,400
GWN12N1C 958-056 6,400 5,300 4,900 6,400
GWN12P24 959-699 6,400 5,300 4,900 6,400
GWN12PNP 959-706 6,400 5,300 4,900 6,400
GWN12WTE 958-080 6,400 5,300 4,900 6,400
GWN132L5 958-421 6,400 5,300 4,900 6,400
GWN15GCW** 956-143 Not Applicable**
GWN15TWE 958-008 6,200 5,200 4,900 6,300
*These engine serial numbers are the best available data.
**GE Aviation records indicate this part serial number was removed from this engine serial number
prior to the Service Bulletin issue.
NOTE:Engine serial numbers which start with 959 are listed for reference. GE records indicate these
were installed in GEnx-2B engines, but are included in this Service Bulletin for completeness
because they are common part numbers.
Table 2. Affected Forward Seal P/N 2417M60P02 or P/N 2417M60P03
Part Serial
Number
Engine Serial
Number*
Cyclic Removal
Threshold
-1B64/P2,
-1B67/P2,
-1B70/P2
Cyclic Removal
Threshold
-1B70/75/P2,
-1B70C/P2,
-1B74/75/P2
Cyclic Removal
Threshold
-1B76/P2,
-1B76A/P2
Cyclic Removal
Threshold -2B67/P
VOLF3208 956-175 15,000 10,600 10,100 15,000
VOLF4110** 956-233 15,000 10,600 10,100 15,000
VOLF4111 956-231 15,000 10,600 10,100 15,000
VOLF4133 956-888 15,000 10,600 10,100 15,000
VOLF4318 956-930 15,000 10,600 10,100 15,000
VOLF4356** 956-958 15,000 10,600 10,100 15,000
VOLF4358 956-947 15,000 10,600 10,100 15,000
VOLF4453 959-679 15,000 10,600 10,100 15,000
VOLF5548 959-761 15,000 10,600 10,100 15,000

### Page 6

GEnx-1B Service Bulletins (SBs)
SB 72-0515 R00 ENGINE - General (72-00-00) - Removal of Forward Seal and Stages 6-10 Compressor Rotor Spool
from Service
Date Printed:
2023/02/22
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
6 of 6
VOLF5561 958-359 15,000 10,600 10,100 15,000
VOLF5569 958-397 15,000 10,600 10,100 15,000
VOLF5606 958-490 15,000 10,600 10,100 15,000
VOLF5607 959-764 15,000 10,600 10,100 15,000
VOLF5612 958-435 15,000 10,600 10,100 15,000
VOLF5613 958-357 15,000 10,600 10,100 15,000
VOLF5614 958-754 15,000 10,600 10,100 15,000
VOLF5617** 958-492 15,000 10,600 10,100 15,000
VOLF5618 958-381 15,000 10,600 10,100 15,000
VOLF5619 958-477 15,000 10,600 10,100 15,000
VOLF5620 958-371 15,000 10,600 10,100 15,000
VOLF5630 958-469 15,000 10,600 10,100 15,000
VOLF5631 958-732 15,000 10,600 10,100 15,000
*These engine serial numbers are the best available data.
**GE Aviation records indicate this part serial number was removed from this engine serial number
prior to the Service Bulletin issue.
NOTE:Engine serial numbers which start with 959 are listed for reference. GE records indicate these
were installed in GEnx-2B engines, but are included in this Service Bulletin for completeness
because they are common part numbers.
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
