# General Electric Service Bulletin GEnx-1B: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2016-5592, the docket of AD 2016-08-12. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin GEnx-1B](https://openairdocs.org/service-documents/ge/genx1b.md)
- Title as filed: U.S. DOT/FAA - GEnx-1B-SB-72-0314-R00
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/6e/57/6e57fab7ac1c94b5642188d4470c2ae914b20fd79e21b51bce661f863c107c4b
- Page: https://openairdocs.org/service-documents/ge/genx1b/file/6e57fab7ac1c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
Date Printed:
2016/04/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
1 of 6
GEnx-1B SERVICE BULLETIN - 72-0314 R00 Revised:04/01/2016
SB 72-0314 R00 ENGINE - GENERAL (72-00-00) - FAN STATOR
MODULE ASSEMBLY CLEARANCE INCREASE FOR GENX-1B PIP2 ENGINES
Issued:
04/01/2016
GE PROPRIETARY INFORMATION
The information contained in this document is GE proprietary
information and is disclosed in confidence. It is the property of GE
and shall not be used, disclosed to others or reproduced without the
express written consent of GE, including, but without limitation, it is
not to be used in the creation, manufacture, development, or derivation
of any repairs, modifications, spare parts, designs, or configuration
changes or to obtain FAA or any other government or regulatory approval
to do so. If consent is given for reproduction in whole or in part,
this notice and the notice set forth on each page of this document
shall appear in any such reproduction in whole or in part.
This technical data is considered EAR controlled pursuant to 15 CFR
Parts 730-774 respectively. Transfer of this data by any means to a
Non-US Person, whether in the United States or abroad, without the
proper U.S. Government authorization (e.g., License, exemption, NLR,
etc.), is strictly prohibited.
GE Aviation authorizes the Federal Aviation Administration to
incorporate this document by reference in an Airworthiness Directive.
Copyright (2016) General Electric Company, U.S.A.
1. PLANNING INFORMATION
A. Effectivity
* * * GEnx-1B64/P2, -1B67/P2, -1B70/P2, -1B70C/P2, -1B70/75/P2, -1B74/75/P2
This Service Bulletin is applicable to all GEnx-1B PIP2 engines.
Engines that have complied with the rework in GEnx-1B S/B 72-0309
are exempt from this Service Bulletin.
The GEnx engine assemblies P/N  and P/N  are2447M10G01 2447M10G02
affected by this Service Bulletin.
B. Description
This Service Bulletin provides a procedure to increase the flow
path clearance between the fan stator module assembly abradable
shroud and the fan blade of the fan module assembly by the
GEnx-1B Cleaning, Inspection, and Repair Manual (CIR), 72-00-01,
REPAIR 014 or GEnx-1B, Boeing 787 Aircraft Maintenance Manual
(AMM), 72-21-00, Specific Repair, TASK
DMC-B787-A-G72-21-00-00A-664A-A.
C. Compliance

### Page 2

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
Date Printed:
2016/04/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
2 of 6
Category 2
GE recommends that you do this Service Bulletin as soon as
possible without effect on revenue service but before December
31, 2016.
NOTE:This Service Bulletin can be done on wing and/or in shop.
This Service Bulletin is offered to improve the reliability or
performance of your GE product, or to help prevent the occurrence
of the event or condition described in this Service Bulletin. If
the operator elects not to participate in the bulletin, that
decision will be taken into consideration by GE in evaluating
future product performance issues that may arise in the
operator's fleet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
Rework to open clearances between the fan blade and abradable shroud as
outlined in step 3.A.(1)(a) of .ACCOMPLISHMENT INSTRUCTIONS
(2) Condition:
An engineering assessment has determined that the fan module assembly
clearances are not optimized and there is a potential for fan rubs that can
result in an unserviceable condition.
(3) Cause:
The fan module assembly clearances are not optimized for the GEnx-1B PIP2
engines.
(4) Improvement:
This rework will increase the clearance between the fan stator module
assembly abradable shroud and the fan blade that reduces the potential for
fan rubs.
(5) Substantiation:
Substantiation is by comparative analysis.
F. Approval
The data contained in this Service Bulletin has been reviewed by
the appropriate governmental authority and the repair(s) and
modification(s) herein comply with the applicable Aviation
Regulations and are APPROVED for installation in the model(s)
listed in this Service Bulletin.
G. Manpower
After you get access to the fan module assembly (inlet cowl
removed or engine placed in a shipping stand), you will need
approximately 16 hours to complete the fan grind rework procedure
per the GEnx-1B CIR, 72-00-01, REPAIR 014 or GEnx-1B, Boeing 787
AMM, 72-21-00, Specific Repair, TASK
DMC-B787-A-G72-21-00-00A-664A-A, for each engine.
H. Weight and Balance
The complete compliance with this Service Bulletin decreases
weight by 2.5 lb (1.1 kg).
I. References (Use the latest version of these documents)
GEnx-1B, Boeing 787 Aircraft Maintenance Manual (AMM)
GEK 9250, Commercial Engine Standard Practices Manual (SPM)
GEK 112851, GEnx-1B Engine Manual (EM)
GEK 112862, GEnx-1B Cleaning, Inspection, and Repair Manual (CIR)
GEK 112864, GEnx-1B Engine Illustrated Parts Catalog (EIPC)

### Page 3

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
Date Printed:
2016/04/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
3 of 6
GEK 112866, GEnx-1B Illustrated Tool and Equipment Manual (ITEM)
GEnx-1B , ENGINE - General (72-00-00) - Fan StatorS/B 72-0309
Module Assembly Rework for GEnx-1B PIP2 Engines
J. Publications Affected
GEnx-1B, Boeing 787 Aircraft Maintenance Manual (AMM)
GEK 112862, GEnx-1B Cleaning, Inspection, and Repair Manual (CIR)
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Bulletin:
None.
(2) Other Spare Parts:
None.
(3) Consumables:
None.
B. Industry Support Information
Contact GE Customer Service Manager (CSM).
C. Configuration Chart
None.
D. Parts Disposition
Rework.
E. Tooling - Price and Availability
Tool Number Description
11C3039G02 Bracket Set - Forward Propulsor, Ground Handling and
Shipping (bracket set)
11C3359P02 Rollover Engine Ship Stand (shipping stand)
11C3443P03 Stand, Shipping (shipping stand)
11C4487P02 Stand, Shipping Engine/Propulsor (shipping stand)
11C4568P01 Stand, Full Engine Air Ship (shipping stand)
11C4576P01 Stand, Shipping - Engine/Propulsor GEnx-1B (shipping stand)
11C4628G01 Bracket Set - Forward Propulsor, Ground Handling and
Shipping (bracket set), alternate tool to 11C3039G02
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
(1) Compliance with this Service Bulletin can be achieved as follows:
(a) Rework the fan stator module assembly (  by the GEnx-1B CIR,Figure 1)
72-00-01, REPAIR 014 or GEnx-1B, Boeing 787 AMM, 72-21-00, Specific
Repair, TASK DMC-B787-A-G72-21-00-00A-664A-A and do as follows:
NOTE:Procedure referenced in the GEnx-1B, Boeing 787 AMM is applicable to
the GEnx-1B PIP1 and PIP2 engines, but there is a specific grind chart
for GEnx-1B PIP2 engines.
1 For the on-wing rework instructions, refer to step 3.B.
2 For the in-shop rework instructions, refer to step 3.C.
B. On-Wing Rework
NOTE:GE recommends that you do this procedure in a hangar or enclosed maintenance
facility.
NOTE:GE recommends to avoid any resposition of the aircraft during the rework
procedure.
(1) Remove the inlet cowl and cover the tail pipe to avoid uncontrolled engine

### Page 4

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
Date Printed:
2016/04/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
others or reproduced without the express written consent of
GE. Technical data is considered ITAR and/or EAR controlled;
transfer of this data to a Non-US Person, without USG
authorization, is strictly prohibited.
Page
4 of 6
rotation, if outdoors. Refer to the GEnx-1B, Boeing 787 AMM, 71-11-01,
Removal, TASK DMC-B787-A-G71-11-01-00A-520A.
(2) Apply masking to cover the booster inlet, outlet guided vane (OGV).
(3) Rework the fan stator module assembly (  Refer to the GEnx-1BFigure 1).
CIR, 72-00-01, REPAIR 014 or GEnx-1B, Boeing 787 AMM, 72-21-00, Specific
Repair, TASK DMC-B787-A-G72-21-00-00A-664A-A and do as follows:
(a) Do a grind of sequences 1, 2, 4, 5, and 8 only.
(b) Post grind, measure the fan case FIR, and clearances at F1.0 and F1.5
only.
(4) Put a mark on the fan case with "Complied with rework per SB 72-0314" in a
3x3 inch area located at 9 o'clock forward looking aft (FLA) (Figure 1).
Refer to the SPM, 70-16-09, PERMANENT INK MARKING STANDARD PRACTICE - EPOXY
COATED INK MARKING.
(5) Remove all masking.
(6) Install the inlet cowl. Refer to the GEnx-1B, Boeing 787 AMM, 71-11-01,
Installation, TASK DMC-B787-A-G71-11-01-00A-720A-A.
(7) Keep all measured data and submit to GE Aviation Fleet Support Contact for
data storage.
NOTE:The GE Aviation Fleet Support Contact Information is as follows:
Fleet Support:
http://www.geaviation.com/support/
OR
E-mail (USA): aviation.fleetsupport@ge.com 
E-mail (China & Asia): aviation.fleetsupport.cn@ge.com
OR
GE Aviation 
M/D Rm. 285
One Neumann Way
Cincinnati, OH 45215
U.S.A.
OR
International Phone: (513) 552-3272 
U.S.A. Phone: 877-432-3272
China & Asia Phone: +86 21 38777666
C. In-Shop Rework
NOTE:GE recommends to avoid any reposition of the engine during the rework
procedure.
(1) Install the 11C3039 or 11C4628 bracket set on either 11C3443, 11C3359,
11C4487, 11C4568 or 11C4576 shipping stand. Refer to Figure 2.
(2) Install the engine in the 11C3443, 11C3359, 11C4487, 11C4586 or 11C4576
shipping stand. Refer to Figure 2.
(3) Apply masking to cover the booster inlet and OGV.
(4) Rework the fan stator module assembly (  Refer to the GEnx-1BFigure 1).
CIR, 72-00-01, REPAIR 014 and do as follows:
(a) Do a grind of sequences 1, 2, 4, 5, and 8 only.
(b) Post grind, measure the fan case FIR, and clearances at F1.0 and F1.5
only.
(5) Put a mark on the fan case with "Complied with rework per SB 72-0314" in a
3x3 inch area located at 9 o'clock FLA (  Refer to the SPM,Figure 1).
70-16-09, PERMANENT INK MARKING STANDARD PRACTICE - EPOXY COATED INK
MARKING.
(6) Remove all masking.
(7) Keep all measured data and submit to GE Aviation Fleet Support Contact for
data storage. Refer to step 3.B.(7) for GE Aviation Fleet Support Contact
Information.

### Page 5 (OCR)

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
ABRADABLE
MARKING  SHROUD
LOCATION
FAN STATOR
MODULE ASSEMBLY
5028912-00
Fan Stator Module Assembly
Figure 1
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
Date Printed:  others or reproduced without the express written consent of  Page
2016/04/05  GE. Technical data is considered ITAR and/or EAR controlled;  5 of 6
transfer of this data to a Non-US  Person, without USG
authorization, is strictly prohibited.

### Page 6 (OCR)

GEnx-1B (LR) Service Bulletins (SBs)
SB 72-0314 R00 ENGINE - General (72-00-00) - Fan Stator Module Assembly Clearance
Increase for GEnx-1B PIP2 Engines
FAN STATOR
MODULE ASSEMBLY
PROPULSOR
BRACKET SET,
11C3039 OR
11C4628
SHIPPING STAND,
11C3443 (SHOWN) OR
11C3359 OR
11C4487 OR
11C4568 OR
11C4576
5028916-00
Engine Placement in Shipping Stand with Bracket Support
Figure 2
GE PROPRIETARY INFORMATION - Subject to the restrictions on the media.
GE PROPRIETARY INFORMATION - Not to be used, disclosed to
Date Printed:  others or reproduced without the express written consent of  Page
2016/04/05  GE. Technical data is considered ITAR and/or EAR controlled;  6 Of 6
transfer of this data to a Non-US  Person, without USG
authorization, is strictly prohibited.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
