# General Electric Service Bulletin GEnx-2B 73-0108: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2026-2717; AD 2026-14-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin GEnx-2B 73-0108](https://openairdocs.org/service-documents/ge/genx2b-73-0108.md)
- Title as filed: GEnx-2B Service Bulletin 73-0108-R00_2025-11-04
- Pages: 6
- PDF: https://openairdocs.org/files/sha256/0c/f7/0cf77aaeb42f084db253269993f645845fe3d8c75d280f4a24832059375bb8c0
- Page: https://openairdocs.org/service-documents/ge/genx2b-73-0108/file/0cf77aaeb42f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

GEnx-2B (LR) Service Bulletins (SBs)
SB 73-0108 R00 ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat 
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
Date Printed: 2025
/11/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
without the express written consent of GE. Technical data is considered ITAR and/or EAR
controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly
prohibited.
Page
1 of 6
GEnx-2B SERVICE BULLETIN - 73-0108 R00
Revised: 
11/04
/2025
SB 73-0108 R00 ENGINE FUEL AND CONTROL - FUEL TUBES (73-11-41) - HEAT EXCHANGER 
FUEL TUBE HOSE AND HEAT EXCHANGER INLET FUEL TUBE HOSE INSPECTION AND 
REPLACEMENT
Issued: 
11/04
/2025
GE Designated: -CONFIDENTIAL-
The information contained in this document is GE proprietary information and is disclosed in confidence. It is the property of 
GE and shall not be used, disclosed to others or reproduced without the express written consent of GE, including, but without 
limitation, it is not to be used in the creation, manufacture, development, or derivation of any repairs, modifications, spare parts, 
designs, or configuration changes or to obtain FAA or any other government or regulatory approval to do so. If consent is given 
for reproduction in whole or in part, this notice and the notice set forth on each page of this document shall appear in any such 
reproduction in whole or part.
This technical data is considered Export Administration Regulations (EAR) pursuant to 15 CFR Parts 730-774 respectively. 
Transfer of this data by any means to a Non-US Person, whether in the United States or abroad, without the proper U.S. 
Government authorization (e.g., License, exemption, NLR, etc.), is strictly prohibited.
Copyright (2025) General Electric Company, U.S.A.
1. PLANNING INFORMATION
A. Effectivity
* * * GEnx-2B67, -2B67B, -2B67/P
This Service Bulletin is applicable to all GEnx-2B engines.
The heat exchanger fuel tube hose P/N  and heat exchanger inlet fuel tube hose P/N , with 2477M34P01 2477M35P01
lot numbers 684141 and/or 677536 markings, are affected by this Service Bulletin.
B. Description
This Service Bulletin provides instructions to identify the supplier marking of the suspect heat exchanger fuel tube 
hose and heat exchanger inlet fuel tube hose and replace them if confirmed within suspect population.
C. Compliance
Category 3
GE recommends that you do this Service Bulletin at the next shop visit of the engine/module.
Impact A
This recommendation is to address a condition that may affect Flight Safety.
NOTE: This Service Bulletin can be done in shop.
This Service Bulletin is offered to improve the reliability or performance of your GE product, or to help prevent the 
occurrence of the event or condition described in this Service Bulletin. If the operator elects not to participate in the 
bulletin, that decision will be taken into consideration by GE in evaluating future product performance issues that 
may arise in the operator's fleet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
To remove parts from service.
(2) Condition:
Hose preform lot numbers 684141 and 677536 are suspect for quality investigation.
(3) Cause:

### Page 2

GEnx-2B (LR) Service Bulletins (SBs)
SB 73-0108 R00 ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat 
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
Date Printed: 2025
/11/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
without the express written consent of GE. Technical data is considered ITAR and/or EAR
controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly
prohibited.
Page
2 of 6
A GEnx-1B fuel cooled oil cooler (FCOC) fuel cooling inlet tube hose with hose preform lot numbers 684141 
and 677536, was found with a leak.
(4) Inspection:
This Service Bulletin is addressing the identification and removal of the heat exchanger fuel tube hose and heat 
exchanger inlet fuel tube hose with hose preform lot numbers 684141 and/or 677536.
(5) Substantiation:
Substantiation is by fleet experience.
F. Approval
The data contained in this Service Bulletin has been reviewed by the FAA or authorized entity representing the FAA 
and the repair(s) and modification(s) herein comply with the applicable Aviation Regulations and are APPROVED 
for installation in the model(s) listed in this Service Bulletin.
G. Manpower
No additional man-hours are required to comply with this Service Bulletin.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
GEK 9250, Commercial Engine Standard Practices Manual (SPM)
GEK 114119, GEnx-2B Engine Manual (EM)
GEK 114122, GEnx-2B Engine Illustrated Parts Catalog (EIPC)
NOTE: The reference documents listed below are for the engine manufacturer's internal use only:
BPP/EPEX No.: 114764
J. Publications Affected
None.
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
(2) Other Spare Parts:
Part Number Qty/ Eng Part Name
Unit ($) 
Price Pkg Qty
Lead Time 
Days
2477M34P01 (1) Tube Hose, Heat Exchanger 
Fuel
Quote (-) --
2477M35P01 (1) Tube Hose, Heat Exchanger 
Inlet Fuel
Quote (-) --
NOTE: Prices are found in the GE Materials Catalog.
(3) Consumables:
None.
B. Industry Support Information
GE is pleased to provide industry support for compliance with this Service Bulletin as outlined below:
(1) Customer is eligible to submit a claim for a one-time back-end spare parts credit per each eligible heat 
exchanger inlet fuel tube hose and heat exchanger fuel tube hose (as defined in paragraph 3.B., ) Identification
in the amount of 50 percent of the actual price paid (up to the GE catalog list price) for parts identified in 
preform lot number 684141 and/or 677536.
(2) To submit a warranty claim, refer to paragraph 4., .APPENDIX - A
C. Configuration Chart
None.
D. Parts Disposition

### Page 3

GEnx-2B (LR) Service Bulletins (SBs)
SB 73-0108 R00 ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat 
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
Date Printed: 2025
/11/05
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
without the express written consent of GE. Technical data is considered ITAR and/or EAR
controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly
prohibited.
Page
3 of 6
If the heat exchanger fuel tube hose P/N  and/or heat exchanger inlet fuel tube hose P/N  2477M34P01 2477M35P01
have hose preform lot number 684141 and/or 677536, refer to paragraph 3.B.,  and do as follows:Identification
(1) For engine installed parts:
(a) Replace the part as specified in paragraph 3.C., Removal of Heat Exchanger Inlet Fuel Tube Hose and 
 and 3.D., Heat Exchanger Fuel Tube Hose Installation of Heat Exchanger Inlet Fuel Tube Hose and Heat 
.Exchanger Fuel Tube Hose
(2) For shelf stock parts:
(a) For new, uninstalled parts, remove from inventory.
The identified suspect part can be locally scrapped.
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
(1) For engine installed parts, do as follows:
(a) Read the assembly and disassembly techniques section. Refer to the SPM, 70-10-00, ASSEMBLY AND 
DISASSEMBLY TECHNIQUES.
(2) For shelf stock parts, do as follows:
(a) Refer to step 3.B.(2).
B. Identification
(1) Identify the heat exchanger inlet fuel tube hose (1,  and heat exchanger fuel tube hose (2).Figure 1)
(2) Find the supplier marking on the heat exchanger inlet fuel tube hose (1,  and heat exchanger fuel tube Figure 1)
hose (2). Refer to  and do as follows:Figure 2
(a) If you find the supplier marking hose preform lot number 684141 and/or 677536, do as follows:
1 For engine installed parts:
a Record the engine serial number (ESN) and contact GE through GE Aviation Fleet Support to 
report the part identification (part number, lot number, and manufacturing date) and ESN. 
Make reference to this GEnx-2B S/B 73-0108 when you send this information.
b Remove the affected heat exchanger inlet fuel tube hose (1,  and/or heat exchanger Figure 1)
fuel tube hose (2) as specified in paragraph 3.C., Removal of Heat Exchanger Inlet Fuel Tube 
.Hose and Heat Exchanger Fuel Tube Hose
2 For shelf stock parts:
a Contact GE through GE Aviation Fleet Support to report the part identification (part number, 
lot number, and manufacturing date). Make reference to this GEnx-2B S/B 73-0108 when you 
send this information.
(b) If you do not find the supplier marking hose preform lot number 684141 and/or 677536, no action is 
necessary.
C. Removal of Heat Exchanger Inlet Fuel Tube Hose and Heat Exchanger Fuel Tube Hose
(1) Remove the affected heat exchanger inlet fuel tube hose (1,  and/or heat exchanger fuel tube hose (2). Figure 1)
Refer to the GEnx-2B EM, 72-00-02, DISASSEMBLY 002, CONFIG 01, Subtask 72-00-02-030-209 or 
CONFIG 02, Subtask 72-00-02-030-404.
D. Installation of Heat Exchanger Inlet Fuel Tube Hose and Heat Exchanger Fuel Tube Hose
(1) Install a new or serviceable heat exchanger inlet fuel tube hose (1,  and/or heat exchanger fuel tube Figure 1)
hose (2). Refer to the GEnx-2B EM, 72-00-02, ASSEMBLY 005, CONFIG 01, Subtask 72-00-02-440-147 or 
CONFIG 02, Subtask 72-00-02-440-416.

### Page 4 (OCR)

GEnx-2B (LR) Service Bulletins (SBS)
SB 73-0108 ROO ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
FWD
MARKING
LOCATION
LEGEND:
1.HEAT EXCHANGER INLET FUEL TUBE HOSE
P/N 2477M35P01
2. HEAT EXCHANGER FUEL TUBE HOSE
P/N 2477M34P01  6056957-00
Heat Exchanger Inlet Fuel Tube Hose and Heat Exchanger Fuel Tube Hose Supplier Marking Location
Figure 1
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
Date Printed: 2025  without the express written consent of GE. Technical data is considered ITAR and/or EAR  Page
controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly  4 0f6
prohibited.

### Page 5 (OCR)

GEnx-2B (LR) Service Bulletins (SBS)
SB 73-0108 ROO ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
07482S0CN2477M35P01
98441-A15047-2 FUEL
07/30/15  08146
PT/A/5581  USA
LOT NUMBER
6056959-00
Example of Supplier Marking Lot Number
Figure 2
4. APPENDIX - A
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
Date Printed: 2025  without the express written consent of GE. Technical data is considered ITAR and/or EAR  Page
/11/05  controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly  5 of 6
prohibited.

### Page 6 (OCR)

GEnx-2B (LR) Service Bulletins (SBS)
SB 73-0108 R0O ENGINE FUEL AND CONTROL - Fuel Tubes (73-11-41) - Heat Exchanger Fuel Tube Hose and Heat
Exchanger Inlet Fuel Tube Hose Inspection and Replacement
All GE warranty claims must have complete information includng:
Date of compliance with this Service Bulletin
Proof of replacement of affected part number(s), preform lotnumber identified
Reference to GEnx-2B S/B 73-0108
GE reference D-3433-5HT
This support is available until December 31, 2029. All clains must be submitted within 12 months of
work completion and by December 31, 2030.
The Industry Support offered in this Service Bulletin is cortingent on the customer having an active
general terms agreement (GTA) for the applicable GE engine rodel. This offer may not be assigned
or otherwise transferred to any other party without the writen consent of GE. The offer is extended to
the customer based on unique facts and circumstances, whichthe customer hereby acknowledges to be
non-precedent setting between the customer and GE. GE's comnitments in this Service Bulletin are
subject to the terms and conditions of the current GTA betwen the customer and GE for the applicable
GE engine model. By signing below, the customer agrees thathe Industry Support offering provides an
equitable resolution as it pertains to this Service Bulletin and the customer and its officers, agents,
partners, subsidiaries, affiliates, successors and assignsforever release, waive and discharge GE, its
officers, directors, parents, partners, affiliates, subsidiaies, employees, successors and assigns, from
any and all liability solely with respect to subject matterf this Service Bulletin. This Service Bulletin
shall not be construed by either party as an admission of ability nor a precedent for resolution for any
potential disputes or claims other than subject matter of this Service Bulletin. If compensation becomes
available to the customer under guarantees, warranty, Servie Bulletins, or other engine program
consideration, the customer will not receive duplicate compmsation, but will receive the compensation
most beneficial to customer through the single guarantee, waranty. Service Bulletin, or other engine
program consideration. The terms and conditions of the custoners GTA are applicable and remain
By signing below, the customer accepts the terms and conditins of this GEnx-2BS/B 73-0108.
Please submit a signed copy with your warranty claim. Claimswill not be processed without signature.
Duly accepted and agreed:
Customer Name  Signature
Date Signed  Printed Name and Title
General Electric Company  /s/ Brian A. Goller
Signature
November 04, 2025  Brian A. Goller, GEnx Fleet Program Manager
Date Signed  Printed Name and Title
6057958-00
Form
Figure 3
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or reproduced
Date Printed: 2025  without the express written consent of GE. Technical data is considered ITAR and/or EAR  Page
/11/05  controlled; transfer of this data to a Non-US Person, without USG authorization, is strictly  60f6
prohibited.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
