# General Electric Service Bulletin 72-0221: No revision named

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2019-0919, the docket of AD 2021-18-13. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin 72-0221](https://openairdocs.org/service-documents/ge/sb-72-0221.md)
- Title as filed: SB_72-0221-R00_8E_issued20190627
- Pages: 11
- PDF: https://openairdocs.org/files/sha256/e1/16/e116aa2789b02776c8dd9981793f59dc53357ce6c3f7c4030f6bd27277a2678d
- Page: https://openairdocs.org/service-documents/ge/sb-72-0221/file/e116aa2789b0

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
GE Designated: -CONFIDENTIAL-
The information contained in this document is GE proprietary information and is disclosed in con-
ﬁdence. It is the property of GE and shall not be used, disclosed to others or reproduced without
the express written consent of GE, including, but without limitation, it is not to be used in the cre-
ation, manufacture, development, or derivation of any repairs, modi ﬁcations, spare parts, designs, or
conﬁguration changes or to obtain FAA or any other government or regulatory approval to do so. If
consent is given for reproduction in whole or in part, this notice and the notice set forth on each page
of this document shall appear in any such reproduction in whole or part.
This technical data is considered subject to the Ex port Administration Regulations (EAR) pursuant
to 15 CFR Parts 730-774. Transfer of this data by any means to a Non-U.S. Person, whether in the
United States or abroad, without the proper U.S. Government authorization (e.g., License, exemption,
NLR, etc.), is strictly prohibited.
Copyright (2019) General Electric Company, U.S.A.
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 1 of 11

### Page 2

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
1. PLANNING INFORMATION
A. Effectivity
CF34-8E
This Alert Service Bulletin is applicable to all CF34-8E engines.
The outer shell combustion liners (combustion outer liner shells) P/N 4124T04G04,
P/N 4124T04G05, and P/N 5159T35G02 are affected by this Alert Service Bulletin.
B. Description
This Alert Service Bulletin provides instructions to do a repetitive borescope
inspection (BSI) of an affected combustion outer liner shell panel P4 with more
than 17,500 ﬂight hours time since new (TSN) or time since repair (TSR) per GEK
112031, 72-44-06, REPAIR 023.
NOTE: If it is not possible to determine the TSN or TSR of the combustion outer liner
shell, engine ﬂight hours since new must be used.
C. Compliance
Category 2
GE recommends that you do the ﬁrst inspection associated with this Alert Service
Bulletin as soon as possible without effect on revenue service but before 500 ﬂight
hours from the original issue date of this Alert Service Bulletin.
Repeat the inspection every 500 ﬂight hours.
NOTE 1: It is only possible to reset the life of the combustion outer liner shell life by
performing GEK 112031, 72-44-06, REPAIR 023. The examples that follow
must be taken into consideration:
. Example 1: A combustion outer liner shell with 19,000 ﬂight hours TSN is
inspected at piece-part level (GEK 112031, 72-44-06 INSPECTION) in
the overhaul shop and found to be serviceable (GEK 112031, 72-44-06,
REPAIR 023 was not performed). This engine must remain on a 500-hour
reduced BSI interval as de ﬁned in this Alert Service Bulletin.
. Example 2: A combustion outer liner shell with 19,000 ﬂight hours TSN is
sent to the component repair shop where GEK 112031, 72-44-06, REPAIR
023 was performed. This engine must follow the on-wing inspection
recommendations de ﬁned in CF34-8E S/B 71-0000.
Impact B
This recommendation is to address a conditi on that may result in an Increased Rate
of In-Flight Shutdowns (IFSD), T ake-Off Aborts (TOA), Air Turn Backs (ATB) or
Diversions (DIV).
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 2
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 3

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
NOTE 2: This Service Bulletin can be done on wing as part of a normally scheduled
BSI of the combustor liner assembly.
NOTE 3: This Service Bulletin can be done in shop via BSI or visual inspection of the
combustion outer liner shell (hot side/ ﬂow path) after the combustor liner
assembly is removed from the engine.
This Alert Service Bulletin is offered to improve the reliability or performance of your
GE product, or to help prevent the occurrence of the event or condition described
in this Alert Service Bulletin. If the operator elects not to participate in the bulletin,
that decision will be taken into consideration by GE in evaluating future product
performance issues that may arise in the operator's ﬂeet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
T o reduce signiﬁcant events.
(2) Condition:
Eight CF34-8 engines have experienced an unscheduled engine removal
(UER) due to signi ﬁcant distress in the combustion outer liner shell, resulting
in buckling/material loss of the combus tion outer liner shell (Figure 1). Three
of the eight engines suffered an operational event, including two engines
that had an IFSD due to severe thermal distress of the high pressure turbine
(HPT)/low pressure turbine (LPT) hardware including burn through of the
LPT case (Figure 2).
(3) Cause:
The root cause evaluation shows that an axial crack can initiate at the
trailing edge (TE) of the combustion outer liner shell panel P4, propagate
across the combustion outer liner shell panel P3 into the combustion outer
liner shell panel P2 (Figure 3), and then connect to a circumferential crack
on the combustion outer liner shell panel P2, causing buckling (Figure 1)
of the combustion outer liner shell as well as oxidation of large sections of
it (Figure 5).
(4) Inspection:
A BSI of the combustion outer liner shell panel P4 is de ﬁned to detect and
monitor the onset of distress.
(5) Substantiation:
Substantiation is by ﬂeet experience.
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 3
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 4

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
F. Approval
The data contained in this Service Bulletin has been reviewed by the FAA or
authorized entity representing the FAA and the repair(s) and modi ﬁcation(s) herein
comply with the applicable Aviation Regulations and are APPROVED for installation
in the model(s) listed in this Service Bulletin.
G. Manpower
After you get access to the engine, you will need approximately 3 man-hours for
each engine or component.
NOTE: For on-wing engines, you will need approximately 3 man-hours after the
engine has cooled down.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
GEK 112031, CF34-8E Engine Manual (EM)
GEK 112031-1, CF34-8E Line Maintenance Manual (LMM)
GEK 112032, CF34-8E Illustrated Parts Catalog (IPC)
CF34-8E S/B 71-0000, POWER PLANT - General (71-00-00) - Consolidated
On-Wing Inspection Recommendations and Servicing T asks List
J. Publications Affected
GEK 112031, CF34-8E Engine Manual (EM)
GEK 112031-1, CF34-8E Line Maintenance Manual (LMM)
K. Interchangeability
Not applicable.
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 4
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 5

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
(2) Other Spare Parts:
None.
(3) Consumables:
None.
B. Industry Support Information
None.
C. Conﬁguration Chart
None.
D. Parts Disposition
None.
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. Inspection
(1) For a description and the locations of the borescope ports, refer to GEK
112031-1, 72-00-00, INSPECTION 003, Subtask 72-00-00-221-004.
(2) Remove the high-voltage igniters from the combustion chamber frame as
follows:
(a) Remove the high-voltage igniter from S16. Refer to GEK 112031-1,
74-00-00, SPECIAL PROCEDURES 009.
(b) Remove the high-voltage igniter from S17. Refer to GEK 112031-1,
74-00-00, SPECIAL PROCEDURES 008.
(3) Set the light source ON/OFF switch to the ON position and turn the brightness
switch from the L position to the H position.
(4) Put the ﬂexible borescope probe into S16 and examine the combustion outer
liner shell. Refer to T able 1 for inspection limits and do as follows:
NOTE 1: It is not necessary to examine the other features of the combustor liner
assembly (combustion inner liner shell or combustor baf ﬂes included).
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 5
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 6

ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
T able 1. Combustion Outer Liner Shell - BSI Limits
Inspection Serviceable Limits Remark
Axial (non-
circumferential) crack,
can be connected with
circumferential crack.
Any amount, if the
axial crack is not more
than 0.75 inch (19.1
mm) in length.
If the length of a crack on panel P4 of
the combustion outer liner shell is more
than 0.75 inch (19.1 mm), increase the
frequency of the BSI to intervals of 500
hours. Refer to Figure 3.
If a crack on the combustion outer liner
shell connects across the entire length
of panel P4 into panel P3, increase the
frequency of the BSI to intervals of 300
hours. Refer to Figure 3.
If a crack on the combustion outer
liner shell connects across the entire
length of panels P4 and P3 and goes
into panel P2, send the engine to
an overhaul facility to replace the
applicable hardware within 5 hours.
R e f e rt oF i g u r e3 .
NOTE 2: Figure 4 shows an example of a combustion outer liner shell panel
P4 with no cracks.
NOTE 3: Figure 3 shows a schematic of the c ombustion outer liner shell with
axial crack examples.
(a) For all other inspection criteria, refer to GEK 112031-1, 72-00-00,
INSPECTION 003, T able 805.
(5) Put the ﬂexible borescope probe into S17 and examine the combustion outer
liner shell. Refer to T able 1 for inspection limits.
NOTE: It is not necessary to examine the other features of the combustor liner
assembly (combustion inner liner shell or combustor baf ﬂes included).
(6) Install the high-voltage igniter into the S16 igniter port. Refer to GEK
112031-1, 74-00-00, SPECIAL PROCEDURES 009.
(7) Install the high-voltage igniter into the S17 igniter port. Refer to GEK
112031-1, 74-00-00, SPECIAL PROCEDURES 008.
June 27, 2019 CF34-8E-AL S/B 72-A0221
PAGE 6
GE Desig nated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 7 (OCR)

CF34-8E TURBOFAN (AIRLINE SERVICE)
GE Aircraft Engines
ALERT SERVICE BULLETIN
ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
06/23/2017 11:36  257 OLYMPUS
6002589-00
Combustion Outer Liner Shell Buckling on Panel P4
Figure 1
June 27, 2019  CF34-8E-AL S/B 72-A0221
PAGE 7
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 8 (OCR)

CF34-8E TURBOFAN (AIRLINE SERVICE)
GE Aircraft Engines
ALERT SERVICE BULLETIN
ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
6002579-00
LPT Case Burn Through
Figure 2
June 27, 2019  CF34-8E-AL S/B 72-A0221
PAGE 8
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 9 (OCR)

CF34-8E TURBOFAN (AIRLINE SERVICE)
GE Aircraft Engines
ALERT SERVICE BULLETIN
ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
AXIAL CRACK ON COMBUSTION
PANEL P4 THAT IS MORE THAN  AXIAL CRACK ON COMBUSTION  OUTER LINER SHELL  0.75 (19.1) (REFER TO NOTE 1)  AXIAL CRACK ON COMBUSTION  OUTER LINER SHELL  THAT EXTENDS ENTIRELY ACROSS  PANEL P4 INTO PANEL P3  ACROSS PANEL P4 AND  PANEL P3 INTO PANEL P2  OUTER LINER SHELL  THAT EXTENDS ENTIRELY
(REFER TO NOTE 2)  (REFER TO NOTE 3)
P4
P2
P1
PO
NOTES:
1. DISPOSITION:
SERVICEABLE WITH A 500-HOUR REDUCED BSI INTERVAL.
2. DISPOSITION:
SERVICEABLE WITH A 300-HOUR REDUCED BSI INTERVAL.
3. DISPOSITION:
UNSERVICEABLE, THE ENGINE MUST BE RETURNED TO AN OVERHAUL FACILITY TO REPLACE
THE APPLICABLE HARDWARE WITHIN 5 HOURS.
4. DIMENSIONS ARE IN INCHES WITH MILLIMETERS IN PARENTHESES.
5. FOR OTHER COMBUSTION OUTER LINER SHELL DISTRESS CONDITIONS NOT SHOWN
IN FIGURE 3, YOU CAN USE GEK 105091-1, 72-00-00, INSPECTION 003, TABLE 805
AS REFERENCE.  6002580-00
Combustion Outer Liner Shell
Figure 3
June 27, 2019  CF34-8E-AL S/B 72-A0221
PAGE 9
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 10 (OCR)

CF34-8E TURBOFAN (AIRLINE SERVICE)
GE Aircraft Engines
ALERT SERVICE BULLETIN
ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
6002581-00
Combustion Outer Liner Shell Panel P4 (No Cracks)
Figure 4
June 27, 2019  CF34-8E-AL S/B 72-A0221
PAGE 10
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

### Page 11 (OCR)

CF34-8E TURBOFAN (AIRLINE SERVICE)
GE Aircraft Engines
ALERT SERVICE BULLETIN
ENGINE - Combustion Chamber Liner Assembly (72-44-00) - Borescope Inspection of
Combustion Outer Liner Shell
6002582-00
Combustor Outer Liner Shell Missing Material
Figure 5
June 27, 2019  CF34-8E-AL S/B 72-A0221
PAGE 11
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
