# General Electric Service Bulletin 72-0351: Revision R01

- Rights: © General Electric Company. Filed by the FAA in regulations.gov docket FAA-2024-1883, the docket of AD 2025-10-04. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [General Electric Service Bulletin 72-0351](https://openairdocs.org/service-documents/ge/sb-72-0351.md)
- Title as filed: CF34-10E SB-72-0351 R01
- Pages: 9
- PDF: https://openairdocs.org/files/sha256/fb/ce/fbce330d42f09fd16bcd31fcd66a06541bc83c1d86bc81b90aa8e1b06e0a9620
- Page: https://openairdocs.org/service-documents/ge/sb-72-0351/file/fbce330d42f0

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CF34-10E Service Bulletins (SBs)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
Date Printed:
2022/11/15
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
1 of 9
CF34-10E SERVICE BULLETIN - 72-0351 R01 Revised:07/17/2019
SB 72-0351 R01 ENGINE - CORE MODULE-MAJOR COMPONENTS (72-00-02) -
INTRODUCTION OF NEW HPT SHROUD/LPT NOZZLE ASSEMBLY P/N 2205M38G07
Issued:
12/18/2018
GE Designated: -CONFIDENTIAL-
The information contained in this document is GE proprietary information and is
disclosed in confidence. It is the property of GE and shall not be used, disclosed to
others or reproduced without the express written consent of GE, including, but without
limitation, it is not to be used in the creation, manufacture, development, or
derivation of any repairs, modifications, spare parts, designs, or configuration
changes or to obtain FAA or any other government or regulatory approval to do so. If
consent is given for reproduction in whole or in part, this notice and the notice set
forth on each page of this document shall appear in any such reproduction in whole or
part.
This technical data is considered subject to the Export Administration Regulations
(EAR) pursuant to 15 CFR Parts 730-774. Transfer of this data by any means to a
Non-U.S. Person, whether in the United States or abroad, without the proper U.S.
Government authorization (e.g., License, exemption, NLR, etc.), is strictly
prohibited.
Copyright (2019) General Electric Company, U.S.A.
TRANSMITTAL INFORMATION
REVISION 1 TO SERVICE BULLETIN 72-0351
Revision 1 is issued to update paragraphs 1., , 2., PLANNING INFORMATION MATERIAL
, and 3., .INFORMATION ACCOMPLISHMENT INSTRUCTIONS
The original was issued December 18, 2018. Revision bars in the left margin identify
changes.
1. PLANNING INFORMATION
A. Effectivity
* * * CF34-10E
This Service Bulletin is applicable to these CF34-10E engines:
*CF34-10E engines, serial numbers 994111 through 994999 and 424101 through 424880.
This Service Bulletin has been introduced in production to these CF34-10E
engines:
*CF34-10E engines, serial numbers 424881 and up.
These serial numbers are the best available data.
The high pressure turbine (HPT) shroud/low pressure turbine (LPT) nozzle
assemblies P/N , P/N , P/N , P/N , and2205M38G01 2205M38G02 2205M38G03 2205M38G04
P/N  are affected by this Service Bulletin.2205M38G05
B. Description
This Service Bulletin introduces a new HPT shroud/LPT nozzle assembly P/N 
 with welded retaining rings.2205M38G07
This Service Bulletin also provides instructions to rework the affected HPT
shroud/LPT nozzle assemblies to P/N .2205M38G07
C. Compliance
Category 2
GE recommends that you do this Service Bulletin as soon as possible without
effect on revenue service at the next time the HPT shroud/LPT nozzle assembly
is removed from the engine, but no later than the next HPT rotor cycle
expiration as specified in GEK 112081, 05-11-03, AIRWORTHINESS LIMITATIONS -
TIME LIMITS 001.
Impact A
This recommendation is to address a condition that may affect Flight Safety.

### Page 2

CF34-10E Service Bulletins (SBs)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
Date Printed:
2022/11/15
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
2 of 9
NOTE:This Service Bulletin can be accomplished in shop.
This Service Bulletin is offered to improve the reliability or performance of
your GE product, or to help prevent the occurrence of the event or condition
described in this Service Bulletin. If the operator elects not to participate
in the bulletin, that decision will be taken into consideration by GE in
evaluating future product performance issues that may arise in the operator's
fleet.
D. Concurrent Requirements
None.
E. Reason
(1) Objective:
To introduce a new part, rework parts, and reduce cost of ownership.
(2) Condition:
The current retaining ring becomes loose during operation, allowing the support air duct to
migrate against the inner surface of the combustion case. This condition can impact the
cooling flow to the LPT stage 1 nozzle, resulting in airfoil distress. It also can cause
unserviceable wear to the combustion case.
(3) Cause:
The current retaining ring has been found to be not properly engaged in the mating
retention groove.
(4) Improvement:
The addition of two welds to the interface of the retaining ring and wear bushing will add
a positive retention of the support air duct.
(5) Substantiation:
Substantiation is by comparative analysis.
F. Approval
The data contained in this Service Bulletin has been reviewed by the FAA or
authorized entity representing the FAA and the repair(s) and modification(s)
herein comply with the applicable Aviation Regulations and are APPROVED for
installation in the model(s) listed in this Service Bulletin.
G. Manpower
After you get access to the HPT shroud/LPT nozzle assembly, you will need
approximately 4 man-hours for each engine or component.
H. Weight and Balance
Weight and balance are not changed.
I. References (Use the latest version of these documents)
GEK 9250, Commercial Engine Standard Practices Manual (SPM)
GEK 112081, CF34-10E Engine Manual (EM)
GEK 112082, CF34-10E Illustrated Parts Catalog (IPC)
NOTE:The reference documents listed below are for the engine manufacturer's internal use only:
CID: 560165, 560165-1
J. Publications Affected
GEK 112081, CF34-10E Engine Manual (EM)
GEK 112082, CF34-10E Illustrated Parts Catalog (IPC)
K. Interchangeability
The HPT shroud/LPT nozzle assembly P/N  and an inspected/repaired/new2205M38G07
combustion case must be replaced as a set and are one-way interchangeable (it
is required to tack-weld all 84 retaining rings).
L. Software Accomplishment Summary
Not applicable.
2. MATERIAL INFORMATION
A. Material - Price and Availability
(1) Parts necessary to do this Service Bulletin:
None.
(2) Other Spare Parts:
None.
(3) Consumables:
Code Number Description
C02-026 Oil, Penetrating
C06-051 Wire, Weld, L-605 (AMS 5796) (filler material)
B. Industry Support Information
None.
C. Configuration Chart
Chg/

### Page 3

CF34-10E Service Bulletins (SBs)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
Date Printed:
2022/11/15
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
3 of 9
New 
Part Number
Qty/
Eng Part Name
Old Part Number/
IPC Location
Qty/
Eng Op Code
Sprt
Code
2205M60G05/
G06/G07
(X) Engine Assembly,
Base
(SIN 00102)
2205M60G05/
G06/G07
(X) RM -/-
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G05
 01-090D,72-00-02
(1) RE/RW 5/A
(FIELD ONLY)
2205M30G01/
G02/G03
(X) Assembly, Core
Module
(SIN 00104)
2205M30G01/
G02/G03
(X) RM -/-
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G01
 01-090,72-00-02
(1) RW 5/A
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G02
 01-090A,72-00-02
(1) RW 5/A
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G03
 01-090B,72-00-02
(1) RW 5/A
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G04
 01-090C,72-00-02
(1) RW 5/A
2205M60G04 (X) Assembly, Core
Module
(SIN 00102)
2205M60G04 (X) RM -/-
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G03
 01-090B,72-00-02
(1) RW 5/A
2205M60G06 (X) Assembly, Core
Module
(SIN 00102)
2205M60G06 (X) RM -/-
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G02
 01-090E,72-00-02
(1) RW 5/A
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G03
 01-090F,72-00-02
(1) RW 5/A
2205M60G04/
G05/G06
(X) Assembly, Core
Module
(SIN 00102)
2205M60G04/
G05/G06
(X) RM -/-
.  2205M38G07
 01-090G,72-00-02
(1) Assembly, HPT
Shroud/LPT Nozzle
(SIN 17300)
.  2205M38G04
 01-090C,72-00-02
(1) RW 5/A
Operation Codes
RE=Replace
RM=Remains
RW=Rework
Change Codes
5=Qualified interchangeability. Refer to paragraph .1.K., Interchangeability
Support Codes
A=Old parts will no longer be supplied.
D. Parts Disposition
Rework.
E. Tooling - Price and Availability
None.
3. ACCOMPLISHMENT INSTRUCTIONS
A. General
(1) The paragraphs that follow are for engines that go through shop visit and have the old HPT
shroud/LPT nozzle assembly P/N , P/N , P/N , P/N ,2205M38G01 2205M38G02 2205M38G03 2205M38G04
or P/N .2205M38G05
(2) Do a visual inspection of the combustion case inner shell surface for evidence of damage
caused by liberated support air ducts. Refer to Table 1 and Figure 1.
Table 1
Inspection Maximum
Serviceable Limit
Maximum Repairable
Limit
Repair Method

### Page 4

CF34-10E Service Bulletins (SBs)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
Date Printed:
2022/11/15
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
4 of 9
Combustion case wear/gouges in
area A caused by contact from
liberated support air ducts.
Refer to  Figure 1.
Any amount, 0.005
inch (0.13 mm) in
maximum depth
without high
metal.
Any amount with
high metal if the
remaining wall
thickness after
blending is no less
than 0.0200 inch
(0.508 mm).
Remove the high metal
and wear/gouges with a
minimum blend radius
of 0.250 inch (6.35
mm). Refer to GEK
9250, 70-42-00,
BLENDING AND REMOVAL
OF HIGH METAL
PROCEDURES.
B. Rework
(1) Make sure that the 84 retaining rings (4,  are installed as specified in GEKFigure 2)
112081, 72-53-00, ASSEMBLY 001, Subtask 72-53-00-440-016.
(2) Weld the retaining ring (4,  to the wear bushing (1) as follows:Figure 2)
(a) Find each of the 84 retaining rings (4).
(b) Weld the retaining ring (4) onto the wear bushing (1). Refer to GEK 9250, 70-41-00,
WELDING AND BRAZING PRACTICES and do as follows:
1 Use the tungsten inert-gas (TIG) welding method with filler material (C06-051).
Refer to GEK 9250, 70-80-06, WELD AND BRAZE MATERIALS.
2 Make two equally spaced welds of 0.060 inch (1.52 mm) in minimum length. If the
retaining ring (4,  melts or cracks, increase the two tack-weld lengthsFigure 2)
to 0.210 inch (5.33 mm) in minimum length.
NOTE:Welding amperage can be adjusted as low as 4 amps to prevent melts.
(c) Do a visual inspection of each weld for cracking with a 5X minimum magnification glass
and bright light. No cracking permitted. If you find cracks, it is permitted to weld
again to fill the crack.
(d) Do step 3.B.(2) for the 84 retaining rings (4,  on the HPT shroud/LPT nozzleFigure 2)
assembly.
NOTE:Part number re-identification is not necessary.
C. Disassembly of Welded Retaining Rings Post-CF34-10E S/B 72-0351
(1) Make sure that the HPT shroud/LPT nozzle assembly is disassembled as specified in GEK
112081, 72-53-00, DISASSEMBLY 001, Subtask 72-53-00-040-001 through Subtask
72-53-00-040-005.
(2) Remove the LPT nozzle assembly from the LPT shroud/nozzle support (5,  asFigure 2)
follows:
CAUTION:DO NOT SCRATCH OR GROOVE THE INNER WALL OF THE LPT SHROUD/NOZZLE SUPPORT WEAR BUSHING
(1) WHEN YOU REMOVE THE RETAINING RINGS (4).
(a) Use a drill and ball burr to remove all retaining ring tack welds and all the retaining
rings (4) from the wear bushings (1).
(b) Discard the remaining retaining ring (4) material from the wear bushing (1). Use a
90-degree machinist hook scribe.
WARNING:REFER TO THE PRODUCT LABEL AND THE MANUFACTURER'S (MATERIAL) SAFETY DATA SHEET
(SDS) FOR INSTRUCTIONS ON THE HAZARDS, STORAGE, SAFE HANDLING AND PROPER USE OF
THIS PRODUCT.
(c) Apply penetrating oil (C02-026) to the support air ducts (2).
(3) Continue with the disassembly procedure as specified in GEK 112081, 72-53-00, DISASSEMBLY
001, Subtask 72-53-00-040-007 through Subtask 72-53-00-040-011.

### Page 5 (OCR)

CF34-10E Service Bulletins (SBS)
SB 72-0351 RO1 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
COMBUSTION
CASE
COMBUSTION
CASE
SURF. C
(AFT FLANGE)
OUTLET
GUIDE VANE
B-B
5061754-00
Combustion Case Inspection
Figure 1 (Sheet 1)
PROPRIETARY INFORMATION - Not to be used, disclosed to others or
Date Printed:  reproduced without the express written consent of GE. Technical data  Page
2022/11/15  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  5 of 9
Person, without USG authorization, is strictly prohibited.

### Page 6

CF34-10E Service Bulletins (SBs)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
Date Printed:
2022/11/15
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
reproduced without the express written consent of GE. Technical data is
considered ITAR and/or EAR controlled; transfer of this data to a Non-US
Person, without USG authorization, is strictly prohibited.
Page
6 of 9
Combustion Case Inspection
Figure 1 (Sheet 2)

### Page 7 (OCR)

CF34-10E Service Bulletins (SBS)
SB 72-0351 RO1 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
SURF. C
AREA A
270°
180%
180°
0.600
(15.24)  1.00  SURF. C
(25.4)
1.400
(35.56)
(BLEND AREAS DUE TO CONTACT WITH
LIBERATED SUPPORT AIR DUCT)
NOTE:
DIMENSIONS ARE IN INCHES WITH
MILLIMETERS IN PARENTHESES.
5061764-00
Combustion Case Inspection
Figure 1 (Sheet 3)
PROPRIETARY INFORMATION - Not to be used, disclosed to others or
Date Printed:  reproduced without the express written consent of GE. Technical data  Page
2022/11/15  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  7 of 9
Person, without USG authorization, is strictly prohibited.

### Page 8 (OCR)

CF34-10E Service Bulletins (SBS)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
A-A
5060234-00
Retaining Ring Weld Location
Figure 2 (Sheet 1)
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others or
Date Printed:  reproduced without the express written consent of GE. Technical data  Page
2022/11/15  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  8 of 9
Person, without USG authorization, is strictly prohibited.

### Page 9 (OCR)

CF34-10E Service Bulletins (SBS)
SB 72-0351 R01 ENGINE - Core Module-Major Components (72-00-02) - Introduction of New HPT Shroud/LPT Nozzle
Assembly P/N 2205M38G07
_ 2
FWD
B
0.060 MIN LENGTH
(1.52)
TWO EQUALLY SPACED
WELDS
1 (REF)
LEGEND:
1. WEAR BUSHING (QTY-84)
(01-025, 72-53-00)
2. SUPPORT AIR DÚCT (QTY-84)
(05-080, 72-53-00)
3. LPT STAGE 1 NOZZLE (QTY-21)
(05-050 AND 05-060, 72-53-00)
4. RETAINING RING (QTY-84)
(05-070, 72-53-00)
5. LPT SHROUD/NOZZLE SUPPORT  4 (REF)
(01-010, 72-53-00)
NOTE:
DIMENSIONS ARE IN INCHES WITH
MILLIMETERS IN PARENTHESES.  5061797-01
Retaining Ring Weld Location
Figure 2 (Sheet 2)
GE Designated: - CONFIDENTIAL Subject to the restrictions on the media
GE PROPRIETARY INFORMATION - Not to be used, disclosed to others
Date Printed:  reproduced without  the express written consent of GE. Technical data  Page
2022/11/15  considered ITAR and/or EAR controlled; transfer of this data to a Non-US  9 of 9
[Person, without USG authorization, is strictly prohibited.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
