# Goodrich Service Bulletin RA32071-160: No revision named

- Rights: © Goodrich. Filed by the FAA in regulations.gov docket FAA-2015-3632; AD 2016-14-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Goodrich Service Bulletin RA32071-160](https://openairdocs.org/service-documents/goodrich/ra32071-160.md)
- Title as filed: RA32071-160_R00
- Pages: 13
- PDF: https://openairdocs.org/files/sha256/91/ff/91ff9e6ef58f93787303693f94e3f94e56a992b3adb9ead0bde189ab69da0d5c
- Page: https://openairdocs.org/service-documents/goodrich/ra32071-160/file/91ff9e6ef58f

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Service Bulletin 
Aerostructures 
850 Lagoon Drive 
Chula Vista, California  91910-2098 SUMMARY 
 
Summary 1 of 1 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
 
NUMBER:   DATE:   ATA SYSTEM:   A318/A319/A320/A321 
RA32071-160 September 18, 2014 71-00-00 CFM56-5A/5B 
 
SUBJECT: NACELLE - ENGINE MOUNT - REPETITIVE INSPECTION OF 
AFT ENGINE MOUNT INNER RETAINER 
 
BACKGROUND 
 
Operators have reported broken aft engine mount 
inner retainers P/N 238-0252-505. 
 
ACTION 
 
This Service Bulletin tasks operators to perform a 
repetitive detailed visual inspection of the aft 
engine mount inner  retainers P/N 238 -0252-505 
(3 per engine) and replace if necessary. 
COMPLIANCE 
Category 3 
Accomplish within 12 months of: A/C delivery, 
inspection or installation of new retainer per SB 
RA32071-146, or issuance of this service bulletin, 
whichever occurs last.  
Perform repetitive inspection  every 12 months  
thereafter. 
 
NOTE: THE INTENT OF AOT A71N001-12 
REV 2, SB RA32071-146 REV 2, EASA 
AD 2013-0050 OR FAA AD 2014-14-06 
SHOULD HAVE BEEN COMPLIED 
WITH PRIOR TO IMPLEMENTATION 
OF THIS SERVICE BULLETIN. 
EFFECTIVITY 
 
All Aft Engine Mounts on A318/A319/A320/A321 
aircraft operated with CFM56-5A/5B engines. 
 
 
 
 
MANPOWER 
 
The estimated time to incorporate the full intent of 
this Service Bulletin on one Nacelle  (without 
bootstrap use): 
MATERIAL INFORMATION  
 
No kit is associated with this Service Bulletin. 
 
 
 
  
(a) Gain Access 0.50 M/HRS 
(b) Inspect Retainers 0.50 M/HRS 
(c) Replace Retainer(s) if necessary 1.00 M/HRS 
(d) Put Nacelle to Service 0.50 M/HRS 
Total 2.50 M/HRS

### Page 2

The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This Page Intentionally 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left Blank

### Page 3

Service Bulletin 
Aerostructures 
850 Lagoon Drive 
Chula Vista, California  91910-2098 
A318/A319/A320/A321 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 1 of 13 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
NACELLE - ENGINE MOUNT – REPETITIVE INSPECTION OF AFT ENGINE MOUNT INNER 
RETAINER 
1. PLANNING INFORMATION  
A. Effectivity  
(1) Airplane: A318/A319/A320/A321 
(2) Engine: CFM56-5A/5B 
(3) All three inner retainers P/N 238-0252-505 on the Aft Engine 
Mount 
NOTE: THE INTENT OF AOT A71N001-12 REV 2, SB RA32071-146 REV 2, 
EASA AD 2013-0050 OR FAA AD 2014-14-06 SHOULD HAVE BEEN 
COMPLIED WITH PRIOR TO IMPLEMENTATION OF THIS SERVICE 
BULLETIN. 
B. Reason  
(1) Problem: 
Aft engine mount inner retainers have been reported failed 
in service at the bend radius.  
(2) Cause: 
 A metallurgical evaluation found the retainers have failed 
by a fatigue cracking mechanism. 
(3) Background: 
 Some cases of failed retainers have been reported. 
(4) Objective: 
Inspect the aft engine mount inner retainers for cracks or 
failures. Remove and replace as necessary.  
(5) Substantiation: 
 This Service Bulletin has been substantiated by engineering 
analysis.

### Page 4

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 2 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
C. Description  
This Service Bulletin provides the instructions to inspect the 
aft engine mount inner retainers P/N 238 -0252-505 for cracks or 
failures every 12 months and replace as necessary.  
D. Compliance  
Category 3 
Accomplish within 12 months of: A/C delivery, inspection or 
installation of new retainer per SB RA32071 -146, or issuan ce of 
this service bulletin, whichever occurs last.  
Perform repetitive inspection every 12 months thereafter. 
NOTE: THE INTENT OF AOT A71N001 -12 REV 2, SB RA32071 -146 REV 2, 
EASA AD 2013 -0050 OR FAA AD 2014 -14-06 SHOULD HAVE BEEN 
COMPLIED WITH PRIOR TO IMPLEMENTATION OF THIS SERVICE 
BULLETIN. 
E. Approval  
The technical content of this document is approved under the 
authority of DOA ref. EASA.21J.031. 
F. Manpower  
Estimated man-hours to incorporate the intent of this bulletin to 
a Nacelle using trained personnel (without bootstrap use): 
In-Shop M-HRS 
  
Gain Access 0.50 
Inspect Retainers 0.50 
Replace Retainer(s) if necessary 1.00 
Put Nacelle into Service 0.50 
Total 2.50 
NOTE: ESTIMATED LABOR HOURS ARE FOR PLANNING PURPOSES ONLY.  LABOR 
REIMBURSEMENT IS NOT  PROVIDED UNDER THE T ERMS OF THIS 
SERVICE BULLETIN. 
G. Weight and Balance  
None.

### Page 5

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 3 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
H. Electrical Load Data  
Not affected. 
I. References  
The following information was used in preparation of this Service 
Bulletin:  
Data Identification Change Chapter/Section Type Data 
AI-CFM56S-140038 June 2014 71-20-00 Engineering Coordination Memo 
EASA AD 2013-0050 March 2013 - Airworthiness Directive 
FAA AD 2014-14-06 July 2014 - 
Airworthiness 
Directive 
Airbus AOT A71N001-12 
Revision 2 February 2013 - 
Alert Operators 
Transmission 
238-0252 ADCN F - Engineering Drawing 
QN 2063462 - - Quality Notification 
A318/A319/A320/A321  
CFM56-5A/5B Component 
Maintenance Manual 
Jul 15/12 71-22-07 Publication 
A319/A320 CFM56-5A  
Aircraft Maintenance 
Manual 
Aug 01/11 
71-13-00 
71-22-11 
78-36-00 
Publication 
A318/A319/A320/A321  
CFM56-5B  Aircraft 
Maintenance Manual 
Aug 01/11 
71-13-00 
71-22-11 
78-36-00 
Publication 
 
J. Other Publications Affected 
None. 
K. Interchangeability or Intermixability of Parts 
Pre and post service bulletin EBUs are interchangeable.  
Interchangeability and intermixability of the Aft Engine Mount 
Assembly is not affected.

### Page 6

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 4 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
2. MATERIAL INFORMATION  
A. Material Price and Availability  
(1) No kits are provided to accomplish this Service Bulletin.  
The following part may be required and may be purchased from 
Goodrich. 
Part Number Nomenclature 
QTY  
(per engine) 
EST’D  
UNIT PRICE 
238-0252-505 Inner Retainer 3 RFQ 
B. Industry Support Information  
No industry support is provided for this service bulletin. 
C. Material Necessary to Implement SB 
  None. 
D. Materials Necessary for each Spare 
Refer to sections 2.A. and 2.C. 
E. Parts Affected by the Service Bulletin 
Part Number Qty Nomenclature Old P/N Qty Operation CHG Code SPRT Code 
238-0252-505  (3) Inner Retainer  238-0252-505 (3) Inspect A 6 
Note 2: Change Codes 
      A = New and Old Parts are directly interchangeable. 
Note 3: Support Codes 
  6 = New part currently available. 
F. Tooling 
Reference Nomenclature 
S487ETT2 Engine Trolley 
S686CR56-5 Engine Cradle 
98D27803500001 Tool-Zero Locking, Flap Slat CTL Lever 
98D71203500000 Bootstrap-System

### Page 7

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 5 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
3. ACCOMPLISHMENT INSTRUCTIONS 
A. Airplane 
These instructions are written on the condition that the Power Plant 
is installed on the airplane. 
(1) Open the fan cowl doors. Ref er to A318/A319/A320/A321 CFM56 -
5A/5B Aircraft Maintenance Manual  (AMM) Task 71 -13-00-010-
040. 
(2) Open the thrust reverser doors. Refer to A318/319/A320/A321 -
CFM56-5A/5B Aircraft Maintenance Manual (AMM) Task 78 -36-00-
010-040. 
(3) Inspection of the Inner Retainers (3 locations) 
NOTE:  PAY CLOSE ATTENTION TO THE INNER BEND OF THE RETAINER. 
NOTE:  THE CENTER RETAINER MAY BE DIFFICULT TO INSPECT. IN 
CASE OF DOUBT, REMO VE THE RETAINER AS PER SECTION 
3.A.(4). FOR INSPECTION. 
a) Clean any dirt or unwanted material from the aft engine 
mount with a lint-free cotton cloth.   
b) Without the removal of any hardware, do a visual 
inspection of the 238-0252-505 inner retainer for cracks  
using 10x magnification, mirror and light. Refer to 
Figure 1.  
i) For retainers which are cracked or failed , replace 
the retainer as per 3.A.(4). Return cracked or 
failed hardware  before next flight  and the Data 
Collection and Reporting Sheet (Sheet  1) back to 
Goodrich.  
ii) For retainers without cracks and not failed , no 
further action is required. Proceed to step 3.A.(8). 
(4) Removal of Outer Retainers (3 locations) 
NOTE:  THIS TASK CAN BE ACC OMPLISHED ON WING, E VEN THOUGH 
CLEARANCE IS TIGHT, USING THE FOLLOWING PROCEDURES 
3.A.(4).A THROUGH 3.A.(4).C. 
a) Without the use of the engine bootstrap system, remove 
the following parts in accordance with AMM 71-22-11-000-
043 section 4. A. for CFM56 -5B and AMM  71-22-11-000-042 
section 4. A. for CFM56 -5A: The NAS6303U5 bolts, the 
VN936NP3C washers, the VN936NP3 washers, and the NAS1805-
3 nuts that attach the outer retainers to the inner 
retainers.  Refer to   Figure 2.  Retain the hardware for 
installation.

### Page 8

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 6 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
b) Remove the outer retainers 238 -0253-509 and 238-0253-511 
(or 238-0253-507). Retain the hardware for installation. 
Refer to Figure 2 and AMM 71-22-11-000-043 section 4.A. 
for CFM56-5B and AMM  71-22-11-000-042 section 4.A. for 
CFM56-5A. 
c) Inspect for a gap between the pin head and anti -rotation 
bracket.  Refer to Figure 2 and 3.   
i) If there is a gap of more than 0.001 inch (0.025mm), 
then proceed to step 3.A.(5) because the engine 
weight must be supported per the Aircraft Maintenance 
Manual, Chapter 71-22-11.   
ii) If the gap is less than 0.001 inch (0.025mm), proceed 
to step 3.A.(6). 
(5) Installation of Bootstrap  
NOTE:  BOOTSTRAP INSTALLATION IS NECESSARY ONLY  IF A GAP IS 
FOUND BETWEEN THE PIN HEAD AND ANTI-ROTATION BRACKET 
a) Install the Bootst rap system to take the engine w eight 
off of the aft engine mount.  Refer to AMM Task 71-22-11-
000-043, subtask 71 -22-11-480-051 for CFM56 -5B and AMM 
Task 71 -22-11-000-042, subtask 71 -22-11-480-050 for 
CFM56-5A. 
(6) Replacement of the Inner Retainers (3 locations) 
a) Inspect the nuts P/N 83642-918 and P/N 83642-1420 for any 
looseness or wear. If loose or worn, rep lace. Record the 
condition of nuts in Sheet 1. 
b) Apply t orque on large nut P/N 83642 -1420 in the 
tightening direction with an open end type adapter or a 
torque wrench  at 80 lbf.ft. Record if there  is any 
movement of the nut in Sheet 1. 
c) Apply torque on small nut P/N 83642-918 in the tightening 
direction with a torque wrench set at 35 lbf.ft. Record 
if there is any movement of the nut in Sheet 1. 
d) Remove the following parts in accordance with AMM 71-22-
11-000-043 section 4.A. for CFM56-5B and AMM  71-22-11-
000-042 section 4.A. for CFM56-5A: the nuts P/N 83642-918 
and P/N 83642-1420. Retain for installation.   
e) Remove and replace  the inner retainer  P/N 238-0252-505.  
Refer to Figure 2 and section 4.G. of AMM 71-22-11-000-
043 and AMM 71 -22-11-400-043 for CFM56 -5B and  section 
4.G. of AMM 71-22-11-000-042 and AMM 71 -22-400-042 for 
CFM56-5A.

### Page 9

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 7 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
(7) Installation of Outer Retainers (3 locations) 
a) Install the following parts in accordance with AMM 71-22-
11-400-043 section 4.G.11 for CFM56 -5B and AMM 71 -22-11-
400-042 section 4.G.11 for CFM56-5A: The 83642-1420 nut, 
83642-918 nut, 238 -0253-511 (or 238 -0253-507) outer 
retainer, 238-0253-509 outer retainer, NAS6303U5 bolts, 
VN936NP3C washers, VN936NP3 washers, and NAS1805-3 nuts. 
b) If installed, remove the Bootstrap system. Refer to AMM  
Task 71 -22-11-400-043, subtask 71 -22-11-080-050 for 
CFM56-5B and AMM Task 71-22-11-400-042, subtask 71-22-11-
080-051 for CFM56-5A. 
(8) Close the thrust reverser doors. Refer to A318/319/A320/A321 -
CFM56-5A/5B Aircraft Maintenance Manual (AMM) Task 78 -36-00-
410-040. 
(9) Close the fan cowl doors.  Refer to A318/A319/A320/A321 
CFM56-5A/5B Aircraft Maintenance Manual  (AMM) Task 71 -13-00-
410-040. 
(10) Write in engine log and/or other records that Goodrich 
Service Bulletin RA32071-160 has been incorporated. 
(11) Reinspect all reta iners P/N 238 -0252-505 every 12 months  in 
accordance with this service bulletin. 
(12) If cracked or failed retainers are found, populate the data 
collection and reporting sheet (Sheet 1) and return with the 
failed retainers to Goodrich  through your Aerostructur es 
Airline Support Manager.  
B. Shop (QEC Instructions) 
The following instructions are for when the engine is in the shop. 
(1) Follow the instructions of sections 3.A .(3), 3.A.(4).a. -
3.A.(4).b., 3.A.(6), 3.A.(7). 
(2) Mark in the engine log that SB RA32071 -160 has bee n 
accomplished. 
(3) If cracked or failed retainers are found, populate the data 
collection and reporting sheet (Sheet 1) and return with the 
failed retainers to Goodrich through your Aerostructures 
Airline Support Manager. 
(4) Reinspect all retainers P/N 238 -0252-505 every 12 months in 
accordance with this service bulletin.

### Page 10

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 8 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
   
 
 
 
 
 
 
 
 
 
 
 
  
     
    
 
Inspection of Retainer Bend for Cracks 
Figure 1

### Page 11 (OCR)

Goodrich Aerostructures Service Bulletin
238-0252-505
LOCATIONS
AFT
ENGINE
MOUNT
83642-1420
TORQUE 80-95 LB.FT.
(108,8-128,8 Nm)
- (3 LOCATIONS)
REMOVE AND
REINSTALL
VN9S6NPSC
WASHER (2)
NAS6303U5  - 83642-918
BOLT (2)  TORQUE 35-42 LB.FT.
(3 LOCATIONS)  (47,5-57,0 Nm)
(3 LOCATIONS)
REMOVE AND  REMOVE AND  INSPECT
REINSTALL  REINSTALL  238-0252-505
VN936NP3  REMOVE AND  238-0253-511  RETAINER
WASHER (2)  REINSTALL  RETAINER  (3 LOCATIONS)
NAS1805-3  238-0259-509  (3 LOCATIONS)
NUT (2)  RETAINER
(3 LOCATIONS)  (3 LOCATIONS)
NOTE: TYPICAL THREE POSITIONS  C1SB-279-00
Assembly and Disassembly of Retainer
Figure ¿
EFFECTIVITY: CFM56-5A/5B  NUMBER:  RA32071-160
DATE: September 18, 2014  PAGE:  9 of 11
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent.
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR).

### Page 12 (OCR)

Goodrich Aerostructures Service Bulletin
DO NOT TORQUE THE AFT ENGINE MOUNT LINK NUTS IF THERE IS A GAP BETWEEN
THE PIN AND THE ANTI-ROTATION BRACKET. DAMAGE CAN OCCUR TO THE PINT
AND BEARING. USE A 0.001 INCH (0,025 mm) FEELER GAGE TO INSPECT FOR
A GAP BETWEEN THE PIN HEAD AND THE ANTI-ROTATION BRACKET. IF THERE IS
A GAP OF MORE THAN 0.001 INCH (0,025 mm), THE ENGINE WEIGHT MUST BE
SUPPORTED PER AMM 71-22-11 BEFORE THE NUT CAN BE TORQUED.
ANTI-ROTATION  AFT ENGINE
USE A 0.001 INCH  BRACKET  MOUNT BEAM
(0,025 mm) FEELER
GAGE TO INSPECT
FOR GAP
PIN
BOLT
NO GAP ALLOWED
BETWEEN PIN HEAD  LINK ASSEMBLY
AND ANTI-ROTATION
BRACKET
c1sb-287-00
Typical Engine Attach Hardware - Gap Test
Figure 3
EFFECTIVITY: CFM56-5A/5B  NUMBER:  RA32071-160
DATE: September 18, 2014  PAGE:  10 of 11
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent.
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR).

### Page 13

Goodrich Aerostructures Service Bulletin 
 
EFFECTIVITY: CFM56-5A/5B NUMBER: RA32071-160 
DATE: September 18, 2014 PAGE: 11 of 11 
 
 
The information contained in this document is Goodrich proprietary and shall not be used, disclosed, or reproduced without Goodrich consent. 
This document is subject to the controls and restrictions of the U.S. Export Administration Regulations (EAR). 
 
DATA COLLECTION SHEET FOR SERVICE BULLETIN RA32071-160  
OPERATOR DATA 
OPERATOR:_________________ 
DATE INSPECTED: ___________ 
A/C MSN: ___________________                                                                                                  
A/C MODEL: _________________ 
ENGINE MODEL: _____________ 
TSN:________________________ 
CSN: ________________ 
TSO: ________________ 
CSO: ________________ 
ENGINE 1 
 
S/N _____________ 
PLEASE INDICATE THE CONDITION OF RETAINERS AT EACH 
LOCATION: 
 BRIGHT 
OR DULL 
INTACT, CRACKED  
OR FAILED 
IF CRACKED, 
CRACK LENGTH 
LEFT:     
CENTER:    
RIGHT:     
HISTORY OF RETAINER MAINTENANCE, IF ANY: 
 
CONDITION OF ALL NUTS (WORN, LOOSE, ETC): 
 LARGE NUT SMALL NUT 
LEFT:    
CENTER:   
RIGHT:    
 
ENGINE 2 
 
S/N _____________ 
PLEASE INDICATE THE CONDITION OF RETAINERS AT EACH 
LOCATION: 
 BRIGHT 
OR DULL 
INTACT, CRACKED  
OR FAILED 
IF CRACKED, 
CRACK LENGTH 
LEFT:     
CENTER:    
RIGHT:     
HISTORY OF RETAINER MAINTENANCE, IF ANY: 
 
CONDITION OF ALL NUTS (WORN, LOOSE, ETC): 
 LARGE NUT SMALL NUT 
LEFT:    
CENTER:   
RIGHT:    
 
 
Data Collection and Reporting Sheet 
Sheet 1

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
