# Goodrich Service Bulletin 25-367: Revision 1

- Rights: © Goodrich. Filed by the FAA in regulations.gov docket FAA-2013-0090, the docket of AD 2013-19-13. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Goodrich Service Bulletin 25-367](https://openairdocs.org/service-documents/goodrich/sb-25-367.md)
- Title as filed: U.S. DOT/FAA - Goodrich SB 25-367r1
- Pages: 7
- PDF: https://openairdocs.org/files/sha256/10/0d/100d36afe65dabd28c5c8ae2d7c164900423571c2a28d1f0d33c915875184e81
- Page: https://openairdocs.org/service-documents/goodrich/sb-25-367/file/100d36afe65d

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Interiors
Goodrich Corporation
3414 South Fifth Street
Phoenix, Arizona 85040-1169
Tel: (602) 243-2200
Fax: (602) 243-2300
LETTER OF TRANSMITTAL
TO: Holders of Goodrich Service Bulletin 25-367, Original Issue, Dated Sep 15/06.
SUBJECT: Goodrich Service Bulletin 25-367, Revision 1, Dated May 01/12.
REASON: Revised to incorporate updates made to Boeing Service Bulletin 747-25-3428 Revision 3.
ACTION: Replace all previous copies of Goodrich Service Bulletin 25-367 with Revision 1, 
Dated May 01/12.
HIGHLIGHTS
Revised Service Bulletin 25-367 to incorporate updates made to Boeing Service Bulletin 747-
25-3428 Revision 3. 
Pages shown below have been revised. All data changes are indicated by a changebar. 
Previous Issues:
Original - Sep 15/06
PAGE CHANGE
1 Revised Paragraph 1.A.(1)
Added Note
Revised Table 1
2 Revised Paragraph B.
Deleted Table 2
3 Revised Paragraphs C. thru G
4 Revised Paragraph J.
Revised Table 3
Revised Paragraph K.
5 Revised Paragraph 2., Steps A.,B., 
and E.
Revised Paragraph 3.B. 
Deleted Table 4
PAGE CHANGE
(END)

### Page 2 (OCR)

THIS PAGE INTENTIONALLY BLANK

### Page 3

INTERIORS
PHOENIX, ARIZONA 85040
SERVICE BULLETIN
ATA SYSTEM: 25
25-367
Page 1 of 5
Orig. - Sep 15/06
Rev. 1 - May 01/12
Subject:  Equipment/Furnishings - Evacuation Systems -
TRANSMITTAL OF TECHNICAL DATA (EAR):  
THESE COMMODITIES, TECHNOLOGY OR SOFTWARE ARE CONTROLLED BY THE U.S. EXPORT ADMINISTRATION REGULATIONS 
(EAR).  DIVERSION CONTRARY TO U.S. LAW IS PROHIBITED. 
LICENSE EXCEPTION: NLR 
ECCN: 9E991
1. Planning Information
A. Effectivity
(1) Equipment – This Service Bulletin affects Main Deck Slide/Rafts and Door 3 Off-Wing 
Ramp/Slides manufactured by Goodrich Corporation. The affected units are listed in Table 1.
NOTE: This revision (Revision 1) to this Service Bulletin changes the technical content of 
this modification. Units modified under the Original Issue of this Service Bulletin 
require additional modification in order to comply with Revision 1.
 
Table 1.  Unit Effectivity 
Nomenclature Goodrich P/N Unit S/N
Slide/Raft, Door 1, 2 & 4 7A1238-( ) All
Slide/Raft, Door 5 7A1239-( ) All
Slide/Raft, Door 2 7A1255-( ) All
Slide/Raft, Door 3 7A1256-( ) All
Slide/Raft, Door 4 7A1257-( ) All
Slide/Raft, Door 1 7A1261-( ) All
Ramp/Slide, Off-Wing Door 3 7A1418-1 thru -8 All
Ramp/Slide, Off-Wing Door 3 7A1418-9 thru -26 All
Modify Packboard Latch

### Page 4

Goodrich
SERVICE BULLETIN
25-367
Page 2 of 5
 Rev. 1 - May 01/12
THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE. 
(2) Action – For all affected units, modify the packboard latch.
B. Reason
(1) Description – Refer to Boeing Service Bulletin 747-25-3428, Revision 3.
(2) Scope of Action – This Service Bulletin modification is considered a complete and total 
measure.  New units of the escape slide models listed in Table 1, above, incorporate this 
modification at the time of manufacture.  This change is not controlled by dash number, 
therefore modification effectivity is not provided for most models.
Table 2.  Modification Effectivity
Deleted
Slide/Raft, Door 1, 2 & 4 7A1447-( ) All
Slide/Raft, Door 5 7A1448-( ) All
Slide/Raft, Door 1 & 4 7A1467-1 thru -28 All
Slide/Raft, Door 5 7A1469-1 thru -16 All
Slide/Raft, Door 2 7A1479-1 thru -16 All
Table 1.  Unit Effectivity (Cont.)
Nomenclature Goodrich P/N Unit S/N

### Page 5

Goodrich
SERVICE BULLETIN
25-367
Page 3 of 5
Rev. 1 -  May 01/12
THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE. 
C. Description
This Service Bulletin describes procedures for modifying the packboard latch as directed by Boeing 
Service Bulletin 747-25-3428, Revision 3.  The unit is removed from the aircraft and taken to the 
workshop.  The slide pack is opened and unpacked.  The packboard latch is modified in accordance 
with Boeing Service Bulletin 747-25-3428, Revision 3.  The slide pack is then restored.
D. Compliance Recommendation
Recommended, to be scheduled in accordance with Boeing Service Bulletin 747-25-3428, 
Revision 3.
E. Approval
This Service Bulletin has been reviewed by the Federal Aviation Administration (FAA) and the repairs 
and modifications described herein comply with the applicable Code of Federal Regulations (CFRs) 
and are FAA approved.
F. Manpower
For most affected units, Goodrich estimates that this modification will require no additional man-
hours per unit when accomplished during scheduled evacuation system maintenance. 
G. Materials
(1) Packboard Modification Parts – Refer to Boeing Service Bulletin 747-25-3428, Revision 3.
(2) Deleted.
(3) Other Materials – Normal materials used to maintain the subject evacuation systems are 
required. Refer to the applicable Component Maintenance Manuals (reference Table 4) for this 
information.
H. Tooling
No new tooling is required.
I. Weight and Balance
Not affected.

### Page 6

Goodrich
SERVICE BULLETIN
25-367
Page 4 of 5
 Rev. 1 - May 01/12
THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE. 
J. Reference
The following documents were used in the preparation of this Service Bulletin. Maintenance 
personnel should refer to these documents when performing these actions. Always use the latest 
issue of the applicable reference publication.
K. Publications Affected
None.
Table 3.  Reference Publications
DOCUMENT DESCRIPTION APPLICATION
25-65-05 Goodrich Component Maintenance Manual (CMM) Ramp/Slide, P/N 7A1418 series
25-66-04 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1238 series
25-66-05 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1239 series
25-66-06 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1261 series
25-66-07 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1255 series
25-66-08 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1256 series
25-66-09 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1257 series
25-66-16 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1447 series
25-66-17 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1448 series
25-66-18 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1479 series
25-66-19 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1467 series
25-66-20 Goodrich Component Maintenance Manual (CMM) Slide/Raft, P/N 7A1469 series
SB 747-25-3428, 
Revision 3
Boeing Service Bulletin B747 Aircraft

### Page 7

Goodrich
SERVICE BULLETIN
25-367
Page 5 of 5
Rev. 1 -  May 01/12
THIS DOCUMENT SUBJECT TO THE CONTROLS AND RESTRICTIONS ON THE FIRST PAGE. 
2. Accomplishment Instructions
WARNING: FOLLOW ALL WARNING AND CAUTION NOTES AND PROCEDURES IN THE 
APPLICABLE MAINTENANCE DOCUMENTS (REFERENCE PARAGRAPH 1.J, ABOVE) 
WHEN PERFORMING THE FOLLOWING WORK PROCEDURES.
NOTE: The following instructions assume that the unit has been removed from the aircraft and is in 
the workshop.
A. Unpack the evacuation system and remove the packboard in accordance with the DISASSEMBLY 
section of the applicable Goodrich Component Maintenance Manual (CMM).  (See Table 3, above.)
B. Modify the latch on the packboard in accordance with Boeing Service Bulletin 747-25-3428, 
Revision 3.
C. Complete other evacuation system maintenance actions, as required.
D. Repack the evacuation system in accordance with the ASSEMBLY section of the applicable 
Goodrich CMM or Packing Instructions (listed in the evacuation system CMM).
E. Mark the unit to indicate compliance with this action as follows.
(1) Deleted.
(2) Mark the girt with the information "SB 25-367R1" adjacent to the evacuation system 
identification placard to indicate compliance with this Service Bulletin. (Stenciling in 1/4 inch 
characters is the preferred marking method.)
(3) Record Service Bulletin compliance on the system information card (located in a pocket on the 
packboard), or record Service Bulletin compliance in accordance with the operator’s component 
information tracking methods and system.
3. Materials and Identification
A. Parts
Reference paragraph 1.G, above.
B. Identification
Part number (dash number) control is not provided for this modification.
Table 4.  DELETED

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
