# Gulfstream Aircraft Service Change 039A: No revision named

- Rights: © Gulfstream Aerospace Corporation. Filed by the FAA in regulations.gov docket FAA-2022-1055, the docket of AD 2023-11-09. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Gulfstream Aircraft Service Change 039A](https://openairdocs.org/service-documents/gulfstream/asc-039a.md)
- Title as filed: ASC-G500-039A
- Pages: 69
- PDF: https://openairdocs.org/files/sha256/9a/d2/9ad2a926168c752bfbeb02fc36025574d76820df26e629eb06c23f7c9e3bcc4f
- Page: https://openairdocs.org/service-documents/gulfstream/asc-039a/file/9ad2a926168c

## Text

Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

TRANSMITTAL SHEET 
 
 
September 13, 2022 Transmittal 
 Page 1 
This sheet transmits Revision A , dated September 13, 2022, to Gulfstream GVII-G500 Aircraft 
Service Change (ASC) 039, dated September 12, 2022,  titled: Flight Controls (ATA 27) Flight 
Control Computer (FCC) Software update v9.5. 
Reason for Revision: 
Adds European Union Aviation Safety Agency (EASA) approval information. 
I. Planning Information: 
Added EASA information to standard verbiage 
Step G. Approval: Added EASA approval language for revision A 
Step N. Publications Affected:  Added EASA AFMS information 
 
II. Material Information: 
Step C.1. Removed table; changed information to a Note 
Step C.2. Added items from deleted table to table for part procured outside of kits 
 Updated Note 1 to remove kit verbiage 
Added Note 4 
Step D. Updated part nomenclature 
 
III. Modification Instructions: 
Step A.1. Added “Transmittal Sheet and” 
Step D. Warning note changed “and” to “the” 
Step F. Added EASA AFMS information 
 
Effect of Revision on Prior Accomplishment: 
This ASC revision replaces ASC 039. Aircraft operators who have previously complied with ASC 
039 are in compliance with this revision and should return the service reply card marked 
“Previously complied with.” 
NOTE This ASC has been reproduced in its entirety. A vertical line in the left margin indicates a 
change in that line of text or figure. There are no change bars for format differences. 
List of Effective Pages: 
Page No. Date 
1 – 7 September 13, 2022 
Revision History: 
Original Issue September 12, 2022 
Revision A September 13, 2022

### Page 2

AIRCRAFT SERVICE CHANGE  
No. 039 
 
 
 
 
 
 
 
SUBJECT 
FLIGHT CONTROLS (ATA 27) 
FLIGHT CONTROL COMPUTER (FCC)  
SOFTWARE UPDATE v9.5 
 
 
 
 
Revision A 
September 13, 2022

### Page 3

AIRCRAFT SERVICE CHANGE 
PROPRIETARY NOTICE:  These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized 
distribution is strictly prohibited.  ©2022 Gulfstream Aerospace Corporation. All rights reserved. 
  
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign 
persons, export transfer or re-export of this technical data requires approval from the Department of Commerce. 
 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022 
PILOTS INFORMATION SHEET 
 
FLIGHT CONTROL COMPUTER (FCC)  
SOFTWARE UPDATE v9.5 
 
This service change updates the Flight Control Computers (FCCs) software version to v9.5. 
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues addressing 
FAA Airworthiness Directive s (AD) 2022- 10-05 and 2020-02-18. Additionally, FCC v9.5 software 
includes many updates and problem report resolutions providing improved robustness and 
performance of the system.  
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS-0002, 
Revision 3, or later approved version, as a result of this service change. 
Aircraft operating under EASA regulations will require GVII-G500 Airplane Flight Manual Supplement 
(AFMS) EASA-GVII-G500 (Issue 1)-2020-01, Revision 3, or later approved version, as a result of this 
service change. 
 
PLEASE DETACH AND GIVE TO FLIGHT DEPARTMENT PERSONNEL

### Page 4

AIRCRAFT SERVICE CHANGE 
PROPRIETARY NOTICE:  These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized 
distribution is strictly prohibited.  ©2022 Gulfstream Aerospace Corporation. All rights reserved. 
  
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign 
persons, export transfer or re-export of this technical data requires approval from the Department of Commerce. 
 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022 
PILOTS INFORMATION SHEET 
 
FLIGHT CONTROL COMPUTER (FCC)  
SOFTWARE UPDATE v9.5 
 
This service change updates the Flight Control Computers (FCCs) software version to v9.5. 
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues addressing 
FAA Airworthiness Directive s (AD) 2022- 10-05 and 2020-02-18. Additionally, FCC v9.5 software 
includes many updates and problem report resolutions providing improved robustness and 
performance of the system. 
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS-0002, 
Revision 3, or later approved version, as a result of this service change. 
Aircraft operating under EASA regulations will require GVII-G500 Airplane Flight Manual Supplement 
(AFMS) EASA-GVII-G500 (Issue 1)-2020-01, Revision 3, or later approved version, as a result of this 
service change. 
 
PLEASE RETAIN THIS COPY WITH THE ASC BOOKLET

### Page 5

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 1 of 7 
Flight Controls (ATA 27) – Flight Control Computer (FCC) Software Update v9.5 
The design of an Aircraft Service Change (ASC) is configured to a standard production aircraft. It is the 
installing facility’s resp onsibility to ensure the development, documentation, and approval of any 
deviations to this installation. 
The instructions provided incorporate the designed modification alone, in step -by-step form, and are 
independent of other aircraft maintenance. No ac commodation for other maintenance, modification, 
inspection, or system operation is made unless specifically identified within this document. If any of these 
actions are performed concurrent with this A SC, it is the responsibility of the performing facilit y to 
coordinate all maintenance activity and to follow established safe maintenance practices as defined in 
the Aircraft Maintenance Manual (AMM) and by the Federal Aviation Administration (FAA)  and the 
European Union Aviation Safety Agency (EASA). 
This aircraft is certified as Electrical Wiring Interconnection System (EWIS) compliant; as such, deviations 
from the approved electrical wiring installation(s) must comply with Advisory Circular (AC) 25.1701-1 and 
be approved by a properly FAA/EASA delegated EWIS engineering representative.  
 
I. Planning Information: 
A. Effectivity 
This service change is applicable to aircraft serial numbers 72001 – 72111. 
This or a similar change will be installed in production on aircraft, serial number 72112 and 
subsequent. 
B. Prerequisites 
None 
C. Concurrent Requirements 
None 
D. Reason 
This service change updates the Flight Control Computers (FCCs) software version to v9.5. 
Incorporation of FCC v9.5 software resolves the AOA limiter and the spoiler monitor issues 
addressing FAA Airworthiness Directives (AD) 2022-10-05 and 2020-02-18. Additionally, FCC 
v9.5 software includes  many updates and problem report resolutions providing improved 
robustness and performance of the system. These updates include but are not limited to: 
• Speed brake auto-retract with landing gear extension 
• Improved Low Speed Awareness (LSA) display continuity during high altitude descent 
and with speed brakes extended 
• Decreased pitch transients during speed brake movement 
• Addition of battery only start procedure 
• Eliminates assertion of multiple nuisance CAS messages during various powerup, 
inflight, landing, and shutdown scenarios 
• Ability to clear Stall Ref Speed Increase CAS message in the event it is caused by slow 
WAI heating (Refer to AFM) 
• Eliminates nuisance FCS No Dispatch CAS due to Rad Alt mismatch during ground ops 
over wet ramp

### Page 6

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 2 of 7 
 
E. Description 
This service change loads new software to the FCC modules, re-identifies each module with a 
new part number, and conducts return-to-service functional checks post-modification. 
F. Compliance 
Incorporation of this ASC is recommended. 
This ASC is a managed program that may only be accomplished at a Gulfstream Aerospace 
GVII-G500 Authorized Warranty Facility or Factory Authorized Service Center  equipped with 
the Thales PMAT Tool kit.  This ASC must be coordinated through your Gulfstream Regional 
Sales Manager (RSM) or by contacting Gulfstream Scheduling at 800- 810-GULF (4853), or 
912-965-4178. 
G. Approval 
The design change effected by this ASC has been classified as Major / Not Significant by the 
United States FAA. The design change data contained here-in and effected by this document 
is approved and accepted by the FAA under Gulfstream Organization Designation Authorization 
(ODA) Project Number, TD-01-2020-0048.  
Revision A :  The design change effected by this ASC has been classified as Major / Not 
Significant by the United States FAA and Major / Non-Basic for the EASA. The design change 
data contained here-in and effected by this document is approved and accepted by the FAA 
under Gulfstream Organization Designation Authorization (ODA) Project Number, TD-01-2020-
0048 and by the EASA under Major Change Approval number 10080122. 
This ASC provides type design data that has been approved for installation on aircraft operating 
in accordance with FAA or EASA regulations.  
H. Approved Engineering Data 
The source data for this aircraft service change is: 
72A2700039-001 Rev. “–” ASC-039 Aircraft Service Change Configuration Control Document 
GVII-G500 Flight Control Computer Software Update 
I. Labor Requirements 
Approximately 16 labor-hours will be required for this installation. 
Knowledge of the Flight Control Systems will be required for this installation.  Only trained / 
certified Gulfstream personnel will perform the FCC software update as described within this 
ASC. 
J. Weight and Balance 
No change 
K. Electrical Load Data 
No change 
L. Software Accomplishment  
Flight control software is loaded directly to the modules of the FCC in accordance with the 
appropriate Thales Service Bulletins  and GVII -GER-0780 GV II FCC Software Upload  
Procedure.

### Page 7

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 3 of 7 
 
M. References 
Aircraft Maintenance Manual (AMM), Chapters 20 and 27 
Thales SB C13204J -27-002 Flight Controls – Flight Control Computer Module A C13204J  
Introduction of a New Software Standard (Mod State KB02). See Appendix A. 
Thales SB C13212J-27-002 Flight Controls – Flight Control Computer Module B C13212J 
Introduction of a New Software Standard (Mod State KB02). See Appendix B.  
N. Publications Affected 
Flight Manual Revision / Supplement Required:   
Aircraft will require GVII -G500 FAA Airplane Flight Manual (AFM) GAC -AC-GVII-G500-OPS-
0002, Revision 3, or later approved version, as a result of this service change. 
Aircraft operating under EASA regulations will require GVII -G500 Airplane Flight Manual 
Supplement (AFMS) EASA -GVII-G500 (Issue 1) -2020-01, Revision 3, or later approved 
version, as a result of this service change. 
Data concerning this service change will be published in a future revision of the affected 
manual(s). This booklet will provide technical data until the revision(s) is published.

### Page 8

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 4 of 7 
II. Material Information: 
A. Material – Price and Availability 
Refer to Section I. F. Compliance. 
B. Industry Support Information (Warranty) 
This ASC will be provided and installed at no charge for a period of 12-months from the release 
date noted on the cover of this Aircraft Service Change if installed at a Gulfstream GVII-G500 
Authorized Warranty Facility or Factory Authorized Service Center  equipped with the 
appropriate PMAT tool and trained personnel. 
C. Material Necessary for Each Aircraft 
1. Materials required and kit effectivity: 
None 
NOTE Materials for this ASC are not kitted. Distribution is coordinated through scheduling 
per step I. F. Compliance. 
2. Materials required to be procured separate from ASC kits: 
PARTS REQUIRED PER AIRCRAFT: 
Item Part Number Nomenclature QTY Notes/Alt./Subs. 
1.  C13204J-27-002 Thales FCC SW 9.5 for Module A 1 Notes 1 & 2 2.  C13212J-27-002 Thales FCC SW 9.5 for Module B 1 
3.  72A2700039-001 FCC S/W v9.5 CCD 1 Note 3 
4.  GVII-GER-3962 GVII FCS Software Update RTS 1 Note 3 
5.  GVII-GER-0780 GVII FCC Software Upload 1 Note 3 
6.  F1432207 Mod kit A C13204KB02 4 Note 4 
7.  F1432209 Mod kit B C13212KB02 4 Note 4 
NOTE 1 Thales FCC software resides with the PMAT tool. 
NOTE 2 Thales service bulletins are available as part of Appendices A and B of this ASC. 
NOTE 3 Items 3-5 are available to authorized users through the Aircraft Information Retrieval 
(AIR) library. 
NOTE 4 Distribution is coordinated through scheduling per step I. F. Compliance.

### Page 9

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 5 of 7 
 
D. Re-identified Parts 
PARTS REQUIRED PER AIRCRAFT: 
Item Part Number Nomenclature QTY Notes/Alt./Subs. 
1.  72P2700001Z100-SW9 FCC SW v9.5 Module A 4 
Note 1 
2.  72P2700001Z200-SW9 FCC SW v9.5 Module B 4 
NOTE 1 FCC Module part numbers are the result of the upgrade and are marked 
appropriately as part of the modification. No units are included as a part of this kit. 
Existing aircraft units are modified to the new part number. 
E. Special Equipment / Tools Required 
Power Supply, PN GSE2400108, or equivalent 
Centralized Hydraulic Test Unit, PN GSE2900149, or equivalent 
NOTE Aircraft 60Hz power and engine hydraulics may be used in place of power and 
hydraulic units. 
Thales PMAT Tool kit, PN B12940AA04 or later approved version 
NOTE These kits will only be available at select facilities and maintained by the facility’s 
tool crib.

### Page 10

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 6 of 7 
III. Modification Instructions: 
NOTE Prior to beginning software update, make note of any fault codes or CAS messages to 
help distinguish which messages are resultant of the software loading process and to 
prevent unnecessary troubleshooting post -modification. Record fault codes or CAS 
messages for later reference. 
A. Preparation: 
1. Review Transmittal Sheet and pages 1 - 5 of this ASC for any applicable actions or 
requirements. Ensure aircraft meets all configuration requirements prior to beginning 
modification. 
2. Remove all electrical power. Refer to AMM, Chapter 20. 
3. Gain access to FCCs 1 and 2 in the LEER and REER. Refer to AMM Chapter 27. 
4. Verify HDMI receptacles on the front of the FCC modules are clear of FOD and in good 
condition. Anything that prevents a good connection must be resolved prior to tool 
connection and software update loading. 
B. Software loading procedures: 
1. Apply power to aircraft. Refer to AMM, Chapter 20. 
2. Configure aircraft and connect PMAT tool as directed in GVII-GER-0780 and Thales SBs 
(see Appendices A and B).  
3. Load FCC software using GVII-GER-0780. 
WARNING AVOID MOVING FCS CONTROLS DURING THE UPLOADING 
PROCESS. INADVERTENT FCS SURFACE MOVEMENT IS NOT 
EXPECTED / TOLERATED DURING UPDATE. 
4. During FCC software loading, ensure the Local Intervention Report (LIR) is completed 
according to the requirements in the Thales Service Bulletins (see Appendices A & B) as 
noted in GVII-GER-0780. Two copies of the report will be required; the original should be 
retained with the aircraft records and a scanned copy should be submitted to Thales. 
Inspection should be present during the completion of the LIR. 
5. Upon completion of software load to the FCCs, remove power from the FCCs by opening 
the following CBs:  FCC 1A, FCC 1B, FCC 2A, FCC 2B, BFCU as directed in GVII-GER-
0780. Disconnect the PMAT tool / equipment and prepare aircraft for operational test. 
C. Replace all items back into the PMAT kit. 
D. Follow on: 
WARNING CLOSING ANY FLIGHT CONTROL SYSTEM CIRCUIT BREAKER MAY 
CAUSE THE FLIGHT CONTROL SURFACES TO MOVE . FAILURE TO 
ENSURE ALL PERSONNEL AND EQUIPMENT ARE CLEAR OF FLIGHT 
CONTROL SURFACES BEFORE CLOSING THE  FLIGHT CONTROL 
SYSTEM CIRCUIT BREAKER MAY RESULT IN SERIOUS INJURY, DEATH, 
OR DAMAGE TO AIRCRAFT. 
1. Perform GVII-GER-3962 – GVII FCS Return to Service (RTS) Procedure Flight Control 
Computer (FCC) Software Upgrade.  
E. Return PMAT kit to tool crib.

### Page 11

AIRCRAFT SERVICE CHANGE 
September 12, 2022 Aircraft Service Change No. 039 
Revision A, September 13, 2022  Page 7 of 7 
 
F. Ensure GVII-G500 FAA Airplane Flight Manual (Issue 1), Revision 3, or later, is available.  In 
addition, aircraft operating under EASA regulations will require GVII-G500 AFMS EASA-GVII-
G500 (Issue 1)-2020-01, Revision 3, or later approved version. 
G. Ensure work area is clean and clear of foreign objects and debris (FOD). 
H. Record compliance with this aircraft service change in the aircraft permanent  maintenance 
records and return aircraft to flight status. 
I. Upon incorporation of this ASC , send a copy of the attached Service Reply Card to: 
ASC039@Gulfstream.com.  
J. Report compliance with this aircraft service change to Gulfstream Computerized Maintenance 
Program (CMP) by uploading the attached service reply card, along with the CMP task card(s) 
sign-off using MyGulfstream, MyCMP Document Upload, e-mail to fax@campsystems.com or 
fax to Gulfstream CMP at 800-944-1775 or 912-963-0265.

### Page 12

AIRCRAFT SERVICE CHANGE 
PROPRIETARY NOTICE:  These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized 
distribution is strictly prohibited.  ©2022 Gulfstream Aerospace Corporation. All rights reserved. 
  
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign 
persons, export transfer or re-export of this technical data requires approval from the Department of Commerce. 
SERVICE REPLY CARD 
 
Please upload this page, along with the CMP task card(s) sign-off using MyGulfstream, MyCMP 
Document Upload, e-mail to fax@campsystems.com or fax to Gulfstream CMP at 800-944-1775 
or 912-963-0265. 
THE FOLLOWING AIRCRAFT SERVICE CHANGE HAS BEEN COMPLIED WITH: 
ASC NO. CMP CODE ACFT SERIAL NO. COMPLIANCE DATE 
039A 970391.000   
 
AIRCRAFT HOURS:    
    
AIRCRAFT LANDINGS:    
    
PREVIOUSLY 
COMPLIED WITH (PCW): 
  
DATE: 
 
 
NOT APPLICABLE: 
  
DATE: 
 
 
PARTS INFORMATION 
NOMENCLATURE PART NUMBER SERIAL NUMBER CMP CODE 
FCC #1 A MON MODULE 
OFF:   270102.000 ON: 72P2700001Z100-SW9  
FCC #1 A COM MODULE 
OFF:   270103.000 ON: 72P2700001Z100-SW9  
FCC #1 B MON MODULE 
OFF:   270101.000 ON: 72P2700001Z200-SW9  
FCC #1 B COM MODULE 
OFF:   270100.000 ON: 72P2700001Z200-SW9  
FCC #2 A MON MODULE 
OFF:   270108.000 ON: 72P2700001Z100-SW9  
FCC #2 A COM MODULE 
OFF:   270109.000 ON: 72P2700001Z100-SW9  
FCC #2 B MON MODULE 
OFF:   270107.000 ON: 72P2700001Z200-SW9  
FCC #2 B COM MODULE 
OFF:   270106.000 ON: 72P2700001Z200-SW9  
 
   
SIGNATURE TITLE / CERTIFICATE 
NUMBER 
COMPANY

### Page 13

AIRCRAFT SERVICE CHANGE 
PROPRIETARY NOTICE:  These materials include proprietary information and data of Gulfstream Aerospace Corporation. Unauthorized 
distribution is strictly prohibited.  ©2022 Gulfstream Aerospace Corporation. All rights reserved. 
  
EAR EXPORT CONTROLLED WARNING: This document contains technical data that is subject to U.S. Export Controls. Release to foreign 
persons, export transfer or re-export of this technical data requires approval from the Department of Commerce. 
 
COMMENTS / SUGGESTIONS / ACTIONS TAKEN:

### Page 14

AIRCRAFT SERVICE CHANGE 
 
 
 
 
 
 
 
 
 
APPENDIX A  
 
Thales 
SB C13204J-27-002 
TITLE: FLIGHT CONTROLS  – FLIGHT CONTROL COMPUTER MODULE A  C13204J 
INTRODUCTION OF A NEW SOFTWARE STANDARD (MOD STATE KB02)

### Page 15

THALES AVS FRANCE SAS  
Vendor Code F9111  
75-77 Avenue Marcel Dassault  
33700 Mérignac - France  
Tel: +33 (0)5 24 44 77 40  
www.thalesgroup.com  
SERVICE BULLETIN  
Date: SEP 13/2022  C13204J -27-002  
 
 RTS Page: 1 of 2 
 
© THALES AVS FRANCE SAS  
REVISION TRANSMITTAL SHEET  
This sheet transmits Revision 01 to Service Bulletin No. C13204J -27-002 . 
 
REASON FOR REVISION  
- To modify the Compliance recommendation (application of this SB is now "Recommended" 
instead of “Mandatory”).  
- To replace the Airworthiness Directive 2020 -05-12 by 2022 -10-05 in the Reason chapter.  
- To replace the Airworthiness Directive AD2022 -099258 by 2020 -02-18 a nd 2022 -10-05 in 
Compliance chapter.  
NOTES : The Service Bulletin is fully re -printed (all pages have  been revised).  
 The letter "R" in the left margin identifies the changes.  
 
ADDITIONAL WORK  
No additional work required.  
NOTE : Units that have previously complied with this Service Bulletin are not affected by this 
revision.  
 
REVISION SEQUENCE  
Original: SEP 09/2022  
Revision: 01 - SEP 13/2022

### Page 16

Service Bulletin  
C13204J  
Date: SEP 13/2022  C13204J -27-002  
 
 RTS Page: 2 
 
© THALES AVS FRANCE SAS  
 
 
 
 
 
 
 
 
 
 
 
 
PAGE INTENTIONALLY LEFT BLANK

### Page 17

THALES AVS FRANCE SAS  
Vendor Code F9111  
75-77 Avenue Marcel Dassault  
33700 Mérignac - France  
Tel: +33 (0)5 24 44 77 40  
www.thalesgroup.com  
SERVICE BULLETIN  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 1 of 24 
 
© THALES AVS FRANCE SAS  
FLIGHT CONTROLS – FLIGHT CONTROL COMPU TER MODULE A  C13204J  
INTRODUCTION OF A NEW SOFTWARE STANDAR D (MOD STATE KB02)  
 
DEFINITIONS  
Operator  Owner / Operator of the aircraft on which the specified equipment is 
installed.  
Authorized Repair Station  Repair Station contractually authorized by THALES AVS FRANCE 
SAS  to perform various maint enance tasks on THALES AVS FRANCE 
SAS equipment.  
Authorized Operator  Operator contractually authorized by THALES AVS FRANCE SAS  to 
perform in house maintenance tasks on equipment under warranty.  
NOTE : Implementation of the modification described by this Se rvice Bulletin involves changes to 
the software embedded in the equipment.  
 The software required to effect the modification is copyrighted.  
 Copy of such software for purpose of performing this modification shall be authorized by 
THALES AVS FRANCE SAS in accordance with the terms and conditions of a 
SOFTWARE COPY AGREEMENT (the "SCA"), to be entered into between the 
modification performer (the "User"), and THALES AVS FRANCE SAS . 
 
1. Planning Information  
A. Effectivity  
This Service Bulletin is applicable to the FLIGHT CONTROL COMPUTER MODULE  A (FCC 
MODULE A)  PNR C13204JB01.  
In production, the equipment will include this modification from serial number 
C13204009500 .

### Page 18

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 2 
 
© THALES AVS FRANCE SAS 
B. Concurrent Requirements  
Not applicable.  
C. Reason  
This software update includes control law updates t o address the AOA limiter issue 
documented in FAA Airworthiness Directive 202 2-10-05 and EASA Emergency  
Airworthiness Directive 2020 -0075 -E, monitor inhibit updates to address continued surface 
protections after first surface loss documented in FAA Airwort hiness Directive 2020 -02-18, 
harmonization of the FCC software between the GVII -G500 and GVII -G600, and 
implementation of various problem report solutions for customer satisfaction and product 
improvement.  
D. Description  
- Downloading of a new SNAPSHOT CONFIG S oftware PNR K8505AAC02  
- Downloading of a new FCM COM Software PNR G6081AAC02  
- Downloading of a new FCM MON Software PNR G6082AAC02  
- Downloading of a new FCMD COM Software PNR G6091AAC01  
- Downloading of a new FCMD MON Software PNR G6092AAC01  
E. Compliance  
Applicat ion of this Service Bulletin is recommended , in accordance with the release of 
Airworthiness Directive  2020 -02-18 and 2022 -10-05. 
This Service Bulletin will be done by Thales AVS or its Authorized Repair Stations or by the 
Authorized Operators whatever the  reason for the return of the equipment.  
F. Approval  
The technical content of this Service Bulletin has been reviewed and accepted by 
Gulfstream.  
G. Manpower  
The estimated time necessary to do the work in this Service Bulletin is 1.50 hours.  
NOTE : This time does  not include testing.  
H. Weight and Balance  
None. 
 
 
 
 
R 
 
 
 
 
 
 
 
 
 
 
 
 
R
R

### Page 19

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 3 
 
© THALES AVS FRANCE SAS 
I. Electrical Load Data  
Not Changed.  
J. Software Accomplishment Summary  
Software Accomplishment Summary has been completed in accordance with the necessary 
conditions of RTCA document DO -178B required for FLIGHT CO NTROL COMPUTER 
MODULE  A (FCC MODULE A) . 
K. References  
Equipment Modification Leaflet (FEE) No. 34190AA  Rev.00.  
CMM, ATA No. 27-01-04A Rev. 03. 
CMM with IPL, ATA No. 27-01-04 Rev. 03. 
CMP Standard Practices, ATA No. 20 -02-00.  
L. Publications Affected  
CMM, ATA No. 27-01-04A . 
CMM with IPL, ATA No. 27 -01-04.  
M. Interchang eability  
Please refer to the Gulfstream Aircraft Service Change ref. G500 ASC  039 .

### Page 20

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 4 
 
© THALES AVS FRANCE SAS 
2. Material I nformation  
A. Material - Price and Availability  
Necessary parts are available in the form of a Hardware Modificat ion kit PNR F143 2207 . 
Availability:  According to a planning to be defined between the Operators and Thales AVS . 
For price and kit(s) procurement, please contact:  
THALES AVS FRANCE SAS  
105, avenue du Général Eisenhower  
BP 63647 
31036 TOULOUSE CEDEX 1  
FRANCE  
Attn: Retrofit Manager  
e-mail  : retrofit@fr.thalesgroup.com  
B. Industry Support Information  
This Service Bulletin will be done by Thales AVS or its Authorized Repair Stations or by the 
Authorized Operators whatever the reason f or the return of the equipment.  The cost will be 
borne by the Operators.  
C. Material Necessary for Each Component  
The following parts are necessary to accomplish thi s Service Bulletin.  
(1)  Material to be Purchased  
Material necessary to modify one equipment:  
New PNR  Key Word  Old PNR  Qty  Unit  
Price  
Special  
Instructions/ 
Disposition  
F1432207  HARDWARE MODIFICATION  
KIT, contains:  
/ 1 /  
. F1721072  . LABEL, IDENTIFICATION 
MARKED  
F1600 861  1 / Replaced  
on FCC  
(2)  Other Material  
(a)  Standard Material  
Refer to the related sections of the CMP Standard Practice s ATA No. 20 -02-00.

### Page 21

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 5 
 
© THALES AVS FRANCE SAS 
(b)  Specific Material for this Service Bulletin  
Not applicable.  
D. Material Necessary for Each Spare  
The material necessary for each spare is the same as in the section Material Necessary for 
Each Component.  
E. Reidentified Parts  
Not applicable.  
F. Tooling - Price and Availability  
(1)  With BNG  bench  
The reference of the ATEC program for the equipment PNR C13204 KB02  is K4176EAA06 
or subsequent with downloading SW K4528AAF02 or subsequent.  
NOTE : Equivalent Test Program s and Test Benches can be used.  
(2)  With PMAT tool  kit PNR B12940AA04  
To perform  the update, each operator will need the following equipment:  
Tooling  PNR  Qty  
PMAT DELL LATITUDE LAPTOP  D620 (*)  1 
PMAT IOBOX  D12918BA (*)  1 
POWER SUPPLY PMAT NG  D13013AA (*)  1 
PMAT G650 FCC -1/2 I/O Box 
Cable  E44 380AA (*)  1 
PMAT G650 FCC -1/2 Cable  D13181AA (*)  2 
Cable Holding Clamps  Standard  2 
Ethernet Cable  Standard  1 
Transportation casing  Standard  1 
NOTE : Necessary means are available in the form of a PMAT kit for Thales FCC  
PNR B12940AA04 or subsequent ve rsions.  
(*) or equivalent

### Page 22

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 6 
 
© THALES AVS FRANCE SAS 
3. Accomplishment Instructions  
A. General  
For a full description of the procedures that follow, refer to the related sections of the CMM 
with IPL ATA No. 27-01-04 and to CM P Standard Practices ATA No. 20 -02-00. 
NOTE S: Under no circumst ances shall Thales AVS  be held responsible for any damage, 
whether consequential or not, arising out of faulty workmanship, negligence or 
misuse by the User and/or Operators, on equipment modified under this Service 
Bulletin.  
 Refer to the related CMM for Caution and Warning calls attention.  
B. With BNG bench (Option1)  
Perform the software upgrade using the BNG program K4528AAF02 (or subsequent in 
"Repair Mode).  
From the Part Number selection menu operator select C13204KB02  and set the options as 
per Figure 1:  
 
Operator Questions for Repair Mode window  
Figure 1

### Page 23

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 7 
 
© THALES AVS FRANCE SAS 
C. With  PMAT tool (Option 2)  
Before the downloading, refer to the Gulfstream Aircraft Service Change  
ref. G500 ASC 039 . 
(1)  Preparation of the Local  Intervention Report (L.I.R.):  
NOTE : To correctly perform th e Teleloading sequence, the operator is requested to 
complete the Local Intervention Report (L.I.R.) given in Appendix Section 4.B 
of this Service Bulletin.  
(a)  Print a copy of the L.I.R.  
(b)  Fill SECTIONS A and B of the L.I.R.  
(2)  Equipment Connection  
(a)  Connect the POW ER SUPPLY PMAT NG (D13013) to the PMAT IOBOX 
(D12918BA) (refer to Figure 2). 
 
PMAT/IOBOX FCC Connections  
Figure 2 
(b)  Connect the POWER SUPPLY PMAT NG  (D13013 ) to a power outlet.  
(c)  Power -Up the PMAT IOBOX (D12918BA) Flip the POWER switch in the upper 
position ( A LED on the POWER switch will turn ON).

### Page 24

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 8 
 
© THALES AVS FRANCE SAS 
(d)  Wait at least 20 seconds before connecting Ethernet cables  (refer to Figure 3). 
 
Wait 20 seconds Warning  
Figure 3 
(e)  Connect the Ethernet cable between PMAT DELL LATITUDE LAPTOP  (D620 ) and 
the PMAT IOBOX (D12918BA) P C port ( refer to Figure 2). 
(f)  Connect P6 and/or P7 of PMAT G650 FCC1/2 I/O BOX CABLE (E44380AA) to 
J6/J7 connector of PMAT G650 FCC1/2 CABLE (D13181AA) ( refer to Figure 2 ). 
(g)  Connect P5 of FCC1/2 I/O BOX CABLE (E44380AA) to J5 of PMAT IOBOX 
(D12918BA) ( refer t o Figure 2). 
(h)  Connect each RJ45 connector of the PMAT G650 FCC1/2 CABLE (D13181AA) 
from LRM1 to LRM8 of PMAT IOBOX (D12918BA) (refer to Figures 2 and 4). 
(i)  For each module to update, connect an HDMI connector of PMAT G650 FCC1/2 
CABLE (D13181AA) to that modul e ( refer to Figure s 2, 4 and 5).

### Page 25

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 9 
 
© THALES AVS FRANCE SAS 
 
 
HDMI cables connected to modules  
Figure 4 
 
Module Ethernet connection to PMAT I/O  BOX  
Figure 5 
(3)  Downloading  of Software  
(a)  Laptop Power -Up, Logon and launch of Update Application  
1 Power -Up the “PMAT DELL LATITUDE LAPTOP” re ference D620.  
2 When "VeraCrypt Boot Loader" prompts for "Enter password", type the 
password provided and press "Enter" (refer to Figure 6).

### Page 26

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 10 
 
© THALES AVS FRANCE SAS 
NOTES : To obtain the passwords, contact Thales at following address: 
ThalesFieldService -Gulfstream@us.thalesgroup.co m  
Put the following email subject: "B12940AA04 G500/G600 password 
request" . 
3 When "VeraCrypt Boot Loader" prompts for "PIM", leave blank and press 
"Enter" (refer to Figure 6). 
4 Wait about 30 -45 seconds while "VeraCrypt Boat Loader" is "Verifying 
password" ( refer to Figure 6). 
 
VeraCrypt Bootloader  
Figure 6  
5 When Windows© prompts for a "User name" and "Password" enter the 
following information and press "OK" (refer to Figure 7): 
- User name: "User" (without quotes)  
- Password: leave blank.  
6 "Automatic PMAT" will s tart automatically in the Windows© session.

### Page 27

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 11 
 
© THALES AVS FRANCE SAS 
 
 
Windows© Login  
Figure 7 
(b)  Uploading  Procedure  
1 When prompted, log on to the “Automatic PMAT” application ( refer to Figure 8) 
using the following information, then press the “OK” button:  
- User Name: Select “Gulfst ream – G500 /G600 ” from the dropdown box.  
NOTES : To obtain the passwords, contact Thales at following address: 
ThalesFieldService -Gulfstream@us.thalesgroup.com  
Put the following email subject: "B12940AA04 G500/G600 password 
request" . 
 
PMAT login window  
Figure 8

### Page 28 (OCR)

THALES
Service Bulletin
C13204J
From the operation selection window (refer to Figure 9), press the "LRU
Software Upgradei button.
A Automatic PMAT Software: G6033AAA11
SELECT THE OPERATION YOU WANT TO PERFORM
LRU Software Upgrade  LRU Version Verification
THALES  LOGOUT
Operation Selection window
Figure 9
When prompted, fill the "GENERAL INFORMATION LRU Software Upgrade"
window (refer to Figure 10). Press "OK" when done.
A Automatic PMAT Software: G6033AAA11
GENERAL INFORMATION LRU Software Upgrade
Customer / Service Center  MTL Center
Technician Name  Joe Fresh
AirCraft Type  G500/G600
Aircraft Serial or Registration  GA5006
LRU Type  IFCC
LRU Serial number
Site Name  YUL Airport
THALES  CANCEL
"GENERAL INFORMATION LRU Software Upgrade" window
Figure 10
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 12
• THALES AVS FRANCE SAS

### Page 29

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 13 
 
© THALES AVS FRANCE SAS 
NOTES : On Figure 10, “LRU Serial Number” is disabled. Module serial numbers 
will be entered later.  
 The “OK” button is available when all fields are not blank. (Except 
“LRU Serial Number” ) 
4 From “SELECT THE SERVICE BULLETIN ID” window ( refer to Figure 11) 
select the appropriate S ervice Bulletin  reference.  
 
VSB Selection  
Figure 11

### Page 30 (OCR)

THALES
Service Bulletin
C13204J
5  From the "FCC Module Selection" window (refer to Figure 12), verify that all
modules to be upgraded are check. Press "OK" when done.
ALRU Software Upgrade: G6033AAA11
FCC Module Selection
M FCC 1 (Pilot Side)  EFCC 2 (Co-Pilot Side)
COM  MON  FAN  MON  COM  COM  MON  FAN  MON  COM
THALES  THALES  THALES  THALES  THALES  THALES  THALES
FEET-BCOM  FOOT-DMON  FCC1-AMON  FCC1-ACOM  FCC2-BMON  FOCE-AMON  FULL-ACOM
THALES  Cancel
FCC Module Selection
Figure 12
NOTE: It is possible to select from 1 to 8 modules it required.
A window (refer to Figure 13) warns that the process LRU upgrade process
takes around 10 minutes. Press the "YES" button to continue.
Л Automatic PMAT Software
LRU UPGRADE FUNCTION
Estimated downloading time = 10
minutes
Do you want to continue?
YES  NO
Pop-up window LRU upgrade process warning
Figure 13
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 14
© THALES AVS FRANCE SAS

### Page 31 (OCR)

THALES
Service Bulletin
C13204J
1 From the LRU Software Upgrade window (refer to Figure 14):
- Press the "NEXT" button to start the process
- Follow the on-screen instructions to complete the connection process.
- Press "NEXT" between each step in the instructions.
NOTE:  Power ON FCC as per circuit breaker reference in the Gulfstream
Aircraft Service Change ref. G500 ASC 039.
A LRU Software Upgrade: G6033AAA11
TECHNICIAN NAME: Joe Fresh
LRUS SERIAL NUMBERS:
THALES VSB NUMBERS: C13204J-27-002; C13212J-27-002
THALES VSB TITLE: G500 FCC Software upgrade from JB01 (SW6.3) to KB02 (SW9.5)
Steps Process  Current Step Execution (FCC#1 Pilot Side)  Current Step Execution (FCC#2 Co-Pilot Side)
STEP  STATUS  Press "NEXT" to begin  Press "NEXT" to begin
MENDEMENT THALES 18X6
| Upgrade file CRC verification
Module connection instructions execution
FCC power OFF/ON test
Modules original software verification test
Upgrade completion process on each Module
Final upgraded software verification
FCC power-down test
THALES  NEXT  FINISH
LSU process window
Figure 14
NOTE: In case the "Original Software Verification Mismatch" appears
(refer to Figure 15) then press "CONTINUE".
×
Original Software Verification Mismatch
Press CONTINUE or ABORT
CONTINUE  ABORT
Original Software Verification Mismatch
Figure 15
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 15
© THALES AVS FRANCE SAS

### Page 32 (OCR)

THALES
Service Bulletin
C13204J
From the "Module Serial Number Verification" window (refer to Figure 16),
confirm the last 6 digits of the serial number of each module using the
associated check box then press "OK" when done.
ALRU Software Upgrade: G6033AAA11
FCC Module Serial Number Verification
M FCC 1 (Pilot Side)  I FCC 2 (Co-Pilot Side)
COM  MON  FAN  MON  COM  COM  MON  FAN  MON  COM
THALES  THALES  THALES  THALES  THALES  THALES
CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN
C13212006624 C13212007565  C13204007754 C13204006114  C13212006858 C13212007553  C13204007154 C13204006655
THALES  OK  Cancel
Confirm Module Serial Number
Figure 16
NOTES: If at any point during the execution of this procedure, any step cannot
be passed or performed as instructed, contact GAC TECH OPS.
In the event of a communication issue: Press Cancel, check wire
connections and module power-on state and restart the process.
In the event of module hardware incompatibility: Ignore the identified
module, and then proceed with the other modules. Then select
appropriate Service Bulletin reference for the remaining module.
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 16
© THALES AVS FRANCE SAS

### Page 33 (OCR)

THALES
Service Bulletin
C13204J
The software upgrade process will now start (refer to Figure 17)
A LRU Software Upgrade: G6033AAA11
TECHNICIAN NAME: Joe Fresh
LRUs SERIAL NUMBERS: C13204006114; C13204007754; C13212006624; C13212007565; C13204006655; C13204007154; C13212006858; C13212007553
THALES VSB NUMBERS: C13204J-27-002; C13212J-27-002
THALES VSB TITLE: G500 FCC Software upgrade from JB01 (SW6.3) to KB02 (SW9.5)
Steps Process  Current Step Execution (FCC#1 Pilot Side)  Current Step Execution (FCC#2 Co-Pilot Side)
STEP  STATUS  Upgrading Software  Upgrading Software
Upgrade file CRC verification  PASS  C13204J-27-002: Processing file 1 of 6  C13204J-27-002: Processing file 1 of 6
Module connection instructions execution  PASS  C13212J-27-002: Processing file 1 of 6  C13212J-27-002: Processing file 1 of 6
FCC power OFF/ON test  PASS
Modules original software verification test  PASS  C13204006114  • PASS  C13204006655  IN PROGRESS
Upgrade completion process on each Module
Final upgraded software verification  C13204007754  I PASS  C13204007154  IN PROGRESS
FCC power-down test
C13212006624  • PASS  C13212006858  IN PROGRESS
C13212007565  • PASS  C13212007553  IN PROGRESS
THALES  Software Upgrade in progress...  NEXT
LSU "Upgrading Software" in progress
Figure 17
10 Wait until the upgrade process is complete.
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 17
© THALES AVS FRANCE SAS

### Page 34 (OCR)

THALES
Service Bulletin
C13204J
11 Upgrade process completed (refer to Figure 18):
- Follow the on-screen instructions to complete the power-down process.
NOTE: Power OFF FCC as per circuit breaker reference in the Gulfstream
Aircraft Service Change ref. G500 ASC 039.
WARNING: IGNORE THE ON-SCREEN INSTRUCTION THAT REQUEST TO
DISCONNECT THE CABLES FROM THE FCC MODULES. KEEP THE FCC
MODULES CONNECTED.
- Press "NEXT" between each step in the instructions.
A, LRU Software Upgrade: G6033AAA11
TECHNICIAN NAME: Joe Fresh
LRUS SERIAL NUMBERS: C13204006114; C13204007754; C13212006624; C13212007565; C13204006655; C13204007154; C13212006858; C13212007553
THALES VSB NUMBERS: C13204J-27-002; C13212J-27-002
THALES VSB TITLE: G500 FCC Software upgrade from JB01 (SW6.3) to KB02 (SW9.5)
Steps Process  Current Step Execution (FCC#1 Pilot Side)  Current Step Execution (FCC#2 Co-Pilot Side)
STEP  STATUS  Power-OFF FCC modules as per circuit breaker reference  Power-OFF FCC modules as per circuit breaker reference
given in the Gulfstream ASC  given in the Gulfstream ASC
Upgrade file CRC verification  PASS
Module connection instructions execution  PASS
FCC power OFF/ON test  PASS
Modules original software verification test  PASS
Upgrade completion process on each Module  PASS
Final upgraded software verification  PASS
FCC power-down test
THALES  Software Upgrade in progress...  NEXT  FINISH
Software Upgrade process completed
Figure 18
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 18
© THALES AVS FRANCE SAS

### Page 35 (OCR)

THALES
Service Bulletin
C13204J
12 At the end of the software upgrade process, verify that all steps PASS (refer
to Figure 19).
A LRU Software Upgrade: G6033AAA11
TECHNICIAN NAME: Joe Fresh
LRUs SERIAL NUMBERS: C13204006114; C13204007754; C13212006624; C13212007565; C13204006655; C13204007154; C132120068!
THALES VSB NUMBERS: C13204J-27-002; C13212J-27-002
THALES VSB TITLE: G500 FCC Software upgrade from JB01 (SW6.3) to KB02 (SW9.5)
Steps Process  L.I.R. Software Control Table Modules (A)
STEP  STATUS  Module SN/  SW C SU  Expected  Actual CSU  Conformity ^
C13204006114  FCC BOOT A  K4081AAD01  K4081AAD01  PASS
Upgrade file CRC verification  PASS  C13204006114  _ FCC ADL A  K4095AAC01  K4095AAC01  PASS
C13204006114  • LANE_SEL_A  G6089AAA01  G6089AAA01  PASS
Module connection instructions execution  PASS  C13204006114  FCM_ACOM  G6081AAC02  G6081AAC02  PASS
C13204006114 FCMD_ACOM G6091AAC01  G6091AAC01  PASS
FCC power OFF/ON test  PASS
C13204006114  FCM_AMON  G6082AAC02  G6082AAC02  PASS
C13204006114 FCMD_AMON G6092AAC01  G6092AAC01  PASS
Modules original software verification test  PASS
C13204006114  SNAP_CF_A  K8505AAC02  K8505AAC02  PASS
Upgrade completion process on each Module  PASS  C13204007754  FCC BOOT A  K4081AAD01  K4081AAD01  PASS
C13204007754  FCC ADL A  K4095AAC01  K4095AAC01  PASS
Final upgraded software verification  PASS  C13204007754 LANE_SEL_A  G6089AAA01  G6089AAA01  PASS
C13204007754  FCM_ACOM  G6081AAC02  G6081AAC02  PASS
FCC power-down test  PASS  C13204007754 FCMD_ACOM G6091AAC01  G6091AAC01  PASS
C13204007754  FCM_AMON  G6082AAC02  G6082AAC02  PASS
C13204007754 FCMD_AMON  G6092AAC01  G6092AAC01  PASS
C13204007754  SNAP_CF_A  K8505AAC02  | K8505AAC02  PASS
Complete L.I.R.  Complete L.I.R.
Module(s) A  Module(s) B
THALES  Software Upgrade Completed SUCCESFULLY  VIEW REPORT  FINISH
LSU "Upgrading Software" PASS status
Figure 19
13 From the "LRU Software Upgrade" window, press "FINISH" (refer to
Figure 19).
14 From the operation selection window (refer to Figure 9), press the "LRU
Version Verificationi button.
15 From the "LRU Version Verification" window press "Next" (refer to Figure 20).
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 19
© THALES AVS FRANCE SAS

### Page 36 (OCR)

THALES
Service Bulletin
C13204J
A LRU Version Verification: G6033AAA11
Instruction  LRU Version Verification
Select LRU and Aircraft
Type then press "NEXT"
LRU Selection
AirCraft Type G500/G600
LRU Type  FCC
THALES  Next  Cancel
"LRU Version Verification" window
Figure 20
16 From the "FCC Module Selection" window; unselect the FCC A modules
(FCC1-ACOM, FCC1-AMON, FCC2-ACOM and FCC2-AMON) (refer to Figure
21). Press "OK" when done.
FCC Module Selection
L FCC 1 (Pilot Side)  EFCC 2 (Co-Pilot Side)
COM  MON  MON  COM  COM  MON  FAN  MON  COM
THALES  THALES  THALES
FCC1-BCOM  FCC1-BMON  FCC2-BCOM  FCC2-BMON  FCC2-AMON FCC2-ACOM
THALES
Unselect FCC A modules
Figure 21
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 20
© THALES AVS FRANCE SAS

### Page 37 (OCR)

THALES
Service Bulletin
C13204J
17 From the "LRU Version Verification" window confirm that the HDMI cables are
connected to the FCC Modules (refer to Figure 4). Press "NEXT" when done.
18 "Power ON" FCC as per circuit breaker reference in Gulfstream Aircraft
Service Change ref. G500 ASC 039. Press "NEXT" when done.
19 At completion of the process, the "LRU Version Verification" window will
display for each module a table with the "Module Position", "Module S/N", the
"CSU Name" and the associated "CSU CRC" value (refer to Figure 22).
ALRU Version Verification: G6033AAA11
Instruction  LRU Version Verification
FCC Version
De-energize the FCC
Circuits Breakers  Module Position  Module S/N  Product P/N
COMZA  C13204005325  C13227AA01
CSU Name  CSU P/N  CSU CRC
FCC_BOOT_A  K4081AAD01  0XA93BB80F
FCC_ADL_A  K4095AAC01  0x785E26D7
FCC_LANESELECT  G6089AAA01  Ox462A1019
FCC_APP_ACOM  G6081AAC02  0x257FE9A6
FCC_APPD_ACOM  G6091AAC01  0xF48D4B43
FCC_APP_AMON  G6082AAC02  0x2297EBD9
FCC_APPD_AMON  G6092AAC01  0x351CC1B9
LRU Selection  Snapshots  K8505AAC02  0xBA1ECF87
AirCraft Type  G500/G600
LRU Type  FCC
THALES  Next  Cancel
"LRU Version Verification" results
Figure 22
20 For each modules, fill-out the L.I.R. "Section C." Use the left "<" and right ">"
button to navigate between the modules position (refer to Figure 22).
21 When L.I.R. "Section C." is filled-out, Power-down the FCC as per circuit
breaker reference in Gulfstream Aircraft Service Change ref. G500 ASC 039.
Press "NEXT" until the "Exit" button displays. Press "Exit" when done.
Date: SEP 09/2022  C13204J-27-002
Rev. : 01 - SEP 13/2022  Page: 21
© THALES AVS FRANCE SAS

### Page 38

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 22 
 
© THALES AVS FRANCE SAS 
22 From the operation selection window (refer to Figure 9), press the “LOGOUT” 
button.  
23 From the “PMAT Login” wind ow (refer to Figure 8 ), press the “EXIT” button to 
quit the PMAT application.  
24 Perform the change of the identification and then fill the rest of the L.I.R and 
finally return the LIR to Thales as indicated on Appendix 4.  
After the downloading, refer to the Gulfstream Aircraft Service Change  
ref. G500 ASC  039 . 
D. Change Identification  (refer to Figures 2 3 and 24 of this Service Bulletin ) 
After the change in this Service Bulletin, the PNR of the FLIGHT CONTROL COMPUTER 
MODULE A  (FCC MODULE A ) becomes PNR C13204 KB02 and  
GAC PNR 72P2700001Z100 -SW9 . 
- Remove the Identification Marked  label  and stick it on the L.I.R. Section D.  
- Install the new Identification Marked  label  PNR F 1721072 . 
 
Localization of Identification Marked label  
Figure 23 
PNR F1721072

### Page 39

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 23 
 
© THALES AVS FRANCE SAS 
 
 
PNR F1721072  
Figure 24 
E. Testing  
(1)  On board the aircraft  
This operation is performed at Aircraft level in accordance to AMM procedures and will 
be covered in the Gulfstream Aircraft Service Change ref. G500 ASC  039 . 
(2)  In shop  
The check of the equipment must be done with reference to th e instructions given in 
the latest revision of CMM ATA No. 27 -01-04A applicable to the related equipment and 
in conjunction with the instructions given in section 2.F.  
If necessary, a temporary copy of these pages will be supplied.

### Page 40

Service Bulletin  
C13204J  
Date: SEP 09/2022  C13204J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 24 
 
© THALES AVS FRANCE SAS 
4. Appendix  
A. Family Tree  Charts of Modification Relationships  
 
B. Local Intervention  Report  
After FCC MODULE A  upload, it is requested to the Operator or Authorized personal to 
scan and email each L.I.R. form to Thales customer support group for Gulfstream:  
mail to: ThalesFieldService -Gulfstream @us.thalesgroup.com  
The L.I.R. can be attached to the related maintenance document on site at the operator 
facility if needed.  
 
SB 001  
C13204 JB01  
C13204 JB01  
SB 00 2 
C13204 KB02  K8505AAA01  K8505AA C02  
G6081AAA01  G6081AAC02  
 G6082AAA01  
 
G6082AAC02  
 
G6091AAA01  
 
G6091AAC01  
 G6092AAA01  
 
G6092AAC01

### Page 41

Send form to: ThalesFieldService -Gulfstream @us.thalesgroup.com  
t SB C13204J-27-002 
(Applicable to GAC P/N 72P2700001Z100-SW6.3) 
 
LOCAL  INTERVENTION  REPORT 
TITLE: G500/G600 Flight Control Computer Module A Software 9.5 Upgrade 
SECTION A. CUSTOMER / AIRCRAFT 
Customer Name : ________________________________ Reference (if any) : ________________ 
A/C Registration : ________________________________ A/C Type : G500 ☒    G600 ☐ 
Intervention Site : ________________________________ Country : ________________ 
SECTION B. THALES FCC PMAT KIT REFERENCE  
Equipment : P/N S/N 
PMAT KIT : B12940AAxx _________________ 
SECTION C. MODULE(S) IDENTIFICATION & SOFTWARE CONFORMITY 
Module Position → 
FCC1 (Pilot Side) FCC2 (Co-Pilot Side) 
PASS/FAIL COM1A Module MON1A Module COM2A Module MON2A Module 
Module S/N         → C13204 _________ C13204 _________ C13204 _________ C13204 _________ 
CSU Name Expected CRC CSU CRC Result CSU CRC Result CSU CRC Result CSU CRC Result 
FCC_BOOT_A 0xA93BB80F 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_ADL_A 0x785E26D7 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_LANESELECT 0x462A1019 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_APP_ACOM 0x257FE9A6 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_APPD_ACOM 0xF48D4B43 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_APP_AMON 0X2297EBD9 0x______________ 0x______________ 0x______________ 0x______________ 
FCC_APPD_AMON 0x351CC1B9 0x______________ 0x______________ 0x______________ 0x______________ 
Snapshots 0xBA1ECF87 0x______________ 0x______________ 0x______________ 0x______________ 
Module Conformity  Pass   Fail  Pass   Fail  Pass   Fail  Pass   Fail 
SECTION D. LABEL(S) 
Old Label 
Removed 
    
New Label Installed  Yes   No  Yes   No  Yes   No  Yes   No 
SECTION E. APPROVALS 
CERTIFIED TECHNICIAN QUALITY 
Name :  Name :  
Signature :  Signature :  
Date :  Date :  
 
Old 
Label Here  
 
Old 
Label Here  
 
Old 
Label Here  
 
Old 
Label Here

### Page 42

AIRCRAFT SERVICE CHANGE 
 
 
 
 
 
 
 
 
APPENDIX B  
 
Thales 
SB C13212J-27-002 
TITLE: FLIGHT CONTROLS  – FLIGHT CONTROL COMPUTER MODULE B C13212 J 
INTRODUCTION OF A NEW SOFTWARE STANDARD (MOD STATE KB02)

### Page 43

THALES AVS FRANCE SAS  
Vendor Code F9111  
75-77 Avenue Marcel Dassault  
33700 Mérignac - France  
Tel: +33 (0)5 24 44 77 40  
www.thalesgroup.com  
SERVICE BULLETIN  
Date: SEP 13/2022  C13212J -27-002  
 
 RTS Page: 1 of 2 
 
© THALES AVS FRANCE SAS  
REVISION TRANSMITTAL SHEET  
This sheet transmits Revision 01 to Service Bulletin No. C13212J -27-002 . 
 
REASON FOR REVISION  
- To modify the Compliance recommendation (application of this SB is now "Recommended" 
instead of “Mandatory”).  
- To replace the Airworthiness Directive 2020 -05-12 by 2022 -10-05 in the Reason chapter.  
- To replace the Airworthiness Directive AD2022 -099258 by 2020 -02-18 and 2022 -10-05 in 
Compliance chapter.  
NOTES : The Service Bulletin is fully re -printed (all pages have  been revised).  
 The letter "R" in the left margin identifies the changes.  
 
ADDITIONAL WORK  
No additional work required.  
NOTE : Units that have previously complied with this Service Bulletin are not affected by this 
revision.  
 
REVISION SEQUENCE  
Original: SEP 09/2022  
Revision: 01 - SEP 13/2022

### Page 44

Service Bulletin  
C13212J  
Date: SEP 13/2022  C13212J -27-002  
 
 RTS Page: 2 
 
© THALES AVS FRANCE SAS  
 
 
 
 
 
 
 
 
 
 
 
 
PAGE INTENTIONALLY LEFT BLANK

### Page 45

THALES AVS FRANCE SAS  
Vendor Code F9111  
75-77 Avenue Marcel Dassault  
33700 Mérignac - France  
Tel: +33 (0)5 24 44 77 40  
www.thalesgroup.com  
SERVICE BULLETIN  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 1 of 24 
 
© THALES AVS FRANCE SAS  
FLIGHT CONTROLS – FLIGHT CONTROL COMPU TER MODULE B  C13212J  
INTRODUCTION OF A NEW SOFTWARE STANDAR D (MOD STATE KB02)  
 
DEFINITIONS  
Operator  Owner / Operator of the aircraft on which the specified equipment is 
installed.  
Authorized Repair Station  Repair Station contractually authorized by THALES AVS FRANCE 
SAS  to perform various maint enance tasks on THALES AVS FRANCE 
SAS equipment.  
Authorized Operator  Operator contractually authorized by THALES AVS FRANCE SAS  to 
perform in house maintenance tasks on equipment under warranty.  
NOTE : Implementation of the modification described by this Se rvice Bulletin involves changes to 
the software embedded in the equipment.  
 The software required to effect the modification is copyrighted.  
 Copy of such software for purpose of performing this modification shall be authorized by 
THALES AVS FRANCE SAS in accordance with the terms and conditions of a 
SOFTWARE COPY AGREEMENT (the "SCA"), to be entered into between the 
modification performer (the "User"), and THALES AVS FRANCE SAS . 
 
1. Planning Information  
A. Effectivity  
This Service Bulletin is applicable to the FLIGHT CONTROL COMPUTER MODULE B  (FCC 
MODULE B ) PNR C13212JB01 . 
In production, the equipment will include this modification from serial number 
C132 12009 900.

### Page 46

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 2 
 
© THALES AVS FRANCE SAS 
B. Concurrent Requirements  
Not applicable.  
C. Reason  
This software update includes control law updates t o address the AOA limiter issue 
documented in FAA Airworthiness Directive 2022 -10-05 and EASA Emergency  
Airworthiness Directive 2020 -0075 -E, monitor inhibit updates to address continued surface 
protections after first surface loss documented in FAA Airwort hiness Directive 2020 -02-18, 
harmonization of the FCC software between the GVII -G500 and GVII -G600, and 
implementation of various problem report solutions for customer satisfaction and product 
improvement.  
D. Description  
- Downloading of a new SNAPSHOT CONFIG S oftware PNR K8506AAC02  
- Downloading of a new FCM COM Software PNR G6083AAC02  
- Downloading of a new FCM MON Software PNR G6084AAC02  
- Downloading of a new FCMD COM Software PNR G6093AAC01  
- Downloading of a new FCMD MON Software PNR G6094AAC01  
E. Compliance  
Applicat ion of this Service Bulletin is recommended , in accordance with the release of 
Airworthiness Directive 2020 -02-18 and 2022 -10-05. 
This Service Bulletin will be done by Thales AVS or its Authorized Repair Stations or by the 
Authorized Operators whatever the  reason for the return of the equipment.  
F. Approval  
The technical content of this Service Bulletin has been reviewed and accepted by 
Gulfstream.  
G. Manpower  
The estimated time necessary to do the work in this Service Bulletin is 1.50 hours.  
NOTE : This time does  not include testing.  
H. Weight and Balance  
None. 
 
 
 
 
R 
 
 
 
 
 
 
 
 
 
 
 
 
R
R

### Page 47

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 3 
 
© THALES AVS FRANCE SAS 
I. Electrical Load Data  
Not Changed.  
J. Software Accomplishment Summary  
Software Accomplishment Summary has been completed in accordance with the necessary 
conditions of RTCA document DO -178B required for FLIGHT CO NTROL COMPUTER 
MODULE B  (FCC MODULE B ). 
K. References  
Equipment Modification Leaflet (FEE) No. 3419 1AA Rev.00.  
CMM, ATA No. 27-01-05A Rev. 03. 
CMM with IPL, ATA No. 27-01-05 Rev. 03. 
CMP Standard Practices, ATA No. 20 -02-00.  
L. Publications Affected  
CMM, ATA No. 27-01-05A. 
CMM with IPL, ATA No. 27 -01-05. 
M. Interchang eability  
Please refer to the Gulfstream Aircraft Service Change ref. G500 ASC  039 .

### Page 48

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 4 
 
© THALES AVS FRANCE SAS 
2. Material I nformation  
A. Material - Price and Availability  
Necessary parts are available in the form of a Hardware Modificat ion kit PNR F1432209 . 
Availability:  According to a planning to be defined between the Operators and Thales AVS . 
For price and kit(s) procurement, please contact:  
THALES AVS FRANCE SAS  
105, avenue du Général Eisenhower  
BP 63647 
31036 TOULOUSE CEDEX 1  
FRANCE  
Attn: Retrofit Manager  
e-mail  : retrofit@fr.thalesgroup.com  
B. Industry Support Information  
This Service Bulletin will be done by Thales AVS or its Authorized Repair Stations or by the 
Authorized Operators whatever the reason for the return of the equipment.  The cost will be 
borne by the Operators.  
C. Material Necessary for Each Component  
The following parts are necessary to accomplish thi s Service Bulletin.  
(1)  Material to be Purchased  
Material necessary to modify one equipment:  
New PNR  Key Word  Old PNR  Qty  Unit  
Price  
Special  
Instructions/ 
Disposition  
F1432209  HARDWARE MODIFICATION  
KIT, contains:  
/ 1 /  
. F172107 3 . LABEL, IDENTIFICATION 
MARKED  
F1600862  1 / Replaced  
on FCC  
(2)  Other Material  
(a)  Standard Material  
Refer to the related sections of the CMP Standard Practice s ATA No. 20 -02-00.

### Page 49

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 5 
 
© THALES AVS FRANCE SAS 
(b)  Specific Material for this Service Bulletin  
Not applicable.  
D. Material Necessary for Each Spare  
The material necessary for each spare is the same as in the section Material Necessary for 
Each Component.  
E. Reidentified Parts  
Not applicable.  
F. Tooling - Price and Availability  
(1)  With BNG  bench  
The reference of the ATEC program for the equipment PNR C132 12KB02 is K417 7EAA0 7 
or subsequent with downloading SW K452 9AAF02 or subsequent.  
NOTE : Equivalent Test Program s and Test Benches can be used.  
(2)  With PMAT tool  kit PNR B12940AA04  
To perform  the update, each operator will need the following equipment:  
Tooling  PNR  Qty  
PMAT DELL LATITUDE LAPTOP  D620 (*)  1 
PMAT IOBOX  D12918BA (*)  1 
POWER SUPPLY PMAT NG  D13013AA (*)  1 
PMAT G650 FCC -1/2 I/O Box 
Cable  E443 80AA (*)  1 
PMAT G650 FCC -1/2 Cable  D13181AA (*)  2 
Cable Holding Clamps  Standard  2 
Ethernet Cable  Standard  1 
Transportation casing  Standard  1 
NOTE : Necessary means are available in the form of a PMAT kit for Thales FCC  
PNR B12940AA04 or subsequent ver sions.  
(*) or equivalent

### Page 50

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 6 
 
© THALES AVS FRANCE SAS 
3. Accomplishment Instructions  
A. General  
For a full description of the procedures that follow, refer to the related sections of the CMM 
with IPL ATA No. 27-01-05 and to CM P Standard Practices ATA No. 20 -02-00. 
NOTE S: Under no circumsta nces shall Thales AVS  be held responsible for any damage, 
whether consequential or not, arising out of faulty workmanship, negligence or 
misuse by the User and/or Operators, on equipment modified under this Service 
Bulletin.  
 Refer to the related CMM for C aution and Warning calls attention.  
B. With BNG bench (Option1)  
Perform the software upgrade using the BNG program K4528AAF02 (or subsequent in 
"Repair Mode).  
From the Part Number selection menu operator select C13212KB02  and set the options as 
per Figure 1:  
 
Operator Questions for Repair Mode window  
Figure 1

### Page 51

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 7 
 
© THALES AVS FRANCE SAS 
C. With  PMAT tool (Option 2)  
Before the downloading, refer to the Gulfstream Aircraft Service Change  
ref. G500 ASC 039 . 
(1)  Preparation of the Local  Intervention Report (L.I.R.):  
NOTE : To correctly perform the  Teleloading sequence, the operator is requested to 
complete the Local Intervention Report (L.I.R.) given in Appendix Section 4.B 
of this Service Bulletin.  
(a)  Print a copy of the L.I.R.  
(b)  Fill SECTIONS A and B of the L.I.R.  
(2)  Equipment Connection  
(a)  Connect the POWE R SUPPLY PMAT NG (D13013) to the PMAT IOBOX 
(D12918BA) (refer to Figure 2). 
 
PMAT/IOBOX FCC Connections  
Figure 2 
(b)  Connect the POWER SUPPLY PMAT NG  (D13013 ) to a power outlet.  
(c)  Power -Up the PMAT IOBOX (D12918BA) Flip the POWER switch in the upper 
position (A  LED on the POWER switch will turn ON).

### Page 52

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 8 
 
© THALES AVS FRANCE SAS 
(d)  Wait at least 20 seconds before connecting Ethernet cables  (refer to Figure 3). 
 
Wait 20 seconds Warning  
Figure 3 
(e)  Connect the Ethernet cable between PMAT DELL LATITUDE LAPTOP  (D620 ) and 
the PMAT IOBOX (D12918BA) PC  port ( refer to Figure 2). 
(f)  Connect P6 and/or P7 of PMAT G650 FCC1/2 I/O BOX CABLE (E44380AA) to 
J6/J7 connector of PMAT G650 FCC1/2 CABLE (D13181AA) ( refer to Figure 2). 
(g)  Connect P5 of FCC1/2 I/O BOX CABLE (E44380AA) to J5 of PMAT IOBOX 
(D12918BA) ( refer to  Figure 2). 
(h)  Connect each RJ45 connector of the PMAT G650 FCC1/2 CABLE (D13181AA) 
from LRM1 to LRM8 of PMAT IOBOX (D12918BA) (refer to Figures 2 and 4). 
(i)  For each module to update, connect an HDMI connector of PMAT G650 FCC1/2 
CABLE (D13181AA) to that module  (refer to Figure s 2, 4 and 5).

### Page 53

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 9 
 
© THALES AVS FRANCE SAS 
 
 
HDMI cables connected to modules  
Figure 4  
 
Module Ethernet connection to PMAT I/O  BOX  
Figure 5 
(3)  Downloading  of Software  
(a)  Laptop Power -Up, Logon and launch of Update Application  
1 Power -Up the “PMAT DELL LATITUDE LAPTOP” ref erence D620.  
2 When "VeraCrypt Boot Loader" prompts for "Enter password", type the 
password provided and press "Enter" (refer to Figure 6).

### Page 54

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 10 
 
© THALES AVS FRANCE SAS 
NOTES : To obtain the passwords, contact Thales at following address: 
ThalesFieldService -Gulfstream@us.thalesgroup.com  
Put the following email subject: "B12940AA04 G500/G600 password 
request".  
3 When "VeraCrypt Boot Loader" prompts for "PIM", leave blank and press 
"Enter" (refer to Figure 6). 
4 Wait about 30 -45 seconds while "VeraCrypt Boat Loader" is "Verifying 
password" (re fer to Figure 6). 
 
VeraCrypt Bootloader  
Figure 6 
5 When Windows© prompts for a "User name" and "Password" enter the 
following information and press "OK" (refer to Figure 7): 
- User name: "User" (without quotes)  
- Password: leave blank.  
6 "Automatic PMAT" will sta rt automatically in the Windows© session.

### Page 55

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 11 
 
© THALES AVS FRANCE SAS 
 
 
Windows© Login  
Figure 7 
(b)  Uploading  Procedure  
1 When prompted, log on to the “Automatic PMAT” application ( refer to Figure 8) 
using the following information, then press the “OK” button:  
- User Name: Select “Gulfstre am – G500 /G600 ” from the dropdown box.  
NOTES : To obtain the passwords, contact Thales at following address: 
ThalesFieldService -Gulfstream@us.thalesgroup.com  
Put the following email subject: "B12940AA04 G500/G600 password 
request".  
 
PMAT login window  
Figu re 8

### Page 56 (OCR)

THALES
Service Bulletin
C13212J
From the operation selection window (refer to Figure 9), press the "LRU
Software Upgradei button.
A Automatic PMAT Software: G6033AAA11
SELECT THE OPERATION YOU WANT TO PERFORM
LRU Software Upgrade  LRU Version Verification
THALES  LOGOUT
Operation Selection window
Figure 9
When prompted, fill the "GENERAL INFORMATION LRU Software Upgrade"
window (refer to Figure 10). Press "OK" when done.
A Automatic PMAT Software: G6033AAA11
GENERAL INFORMATION LRU Software Upgrade
Customer / Service Center  MTL Center
Technician Name  Joe Fresh
AirCraft Type  G500/G600
Aircraft Serial or Registration  GA5006
LRU Type  IFCC
LRU Serial number
Site Name  YUL Airport
THALES  CANCEL
"GENERAL INFORMATION LRU Software Upgrade" window
Figure 10
Date: SEP 09/2022  C13212J-27-002
Rev. : 01 - SEP 13/2022  Page: 12
• THALES AVS FRANCE SAS

### Page 57

Service Bulletin  
C13212J  
Date: SEP 09/2022  C13212J -27-002  
 
Rev. : 0 1 - SEP 13/2022  Page: 13 
 
© THALES AVS FRANCE SAS 
NOTES : On Figure 10, “LRU Serial Number” is disabled. Module serial numbers 
will be entered later.  
 The “OK” button is available when all fields are not blank. (Except 
“LRU Serial Number”)  
4 From “SELECT THE SERVICE BULLETIN ID” window ( refer to Figure 11) 
select the appropriate S ervice Bulletin  reference.  
 
VSB Selection  
Figure 11

### Page 58 (OCR)

THALES
Service Bulletin
C13212J
5  From the "FCC Module Selection" window (refer to Figure 12), verify that all
modules to be upgraded are check. Press "OK" when done.
A LRU Software Upgrade: G6033AAA11
FCC Module Selection
M FCC 1 (Pilot Side)  M FCC 2 (Co-Pilot Side)
COM  MON  FAN  MON  COM  COM  MON  FAN  MON  COM
THALES  THALES  THALES
FCC1-BCOM  FCC1-BMON  FCC1-AMON  FCC1-ACOM  FCC2-BCOM  FCC2-BMON  FCC2-AMON  FCC2-ACOM
THALES  Cancel
FCC Module Selection
Figure 12
NOTE: It is possible to select from 1 to 8 modules if required.
A window (refer to Figure 13) warns that the process LRU upgrade process
takes around 10 minutes. Press the "YES" button to continue.
A Automatic PMAT Software
LRU UPGRADE FUNCTION
Estimated downloading time = 10
minutes
Do you want to continue?
YES  NO
Pop-up window LRU upgrade process warning
Figure 13
Date: SEP 09/2022  C13212J-27-002
Rev. : 01 - SEP 13/2022  Page: 14
© THALES AVS FRANCE SAS

### Page 59 (OCR)

THALES
Service Bulletin
C13212J
1 From the LRU Software Upgrade window (refer to Figure 14):
- Press the "NEXT" button to start the process
- Follow the on-screen instructions to complete the connection process.
- Press "NEXT" between each step in the instructions.
NOTE:  Power ON FCC as per circuit breaker reference in the Gulfstream
Aircraft Service Change ref. G500 ASC 039.
A LRU Software Upgrade: G6033AAA11
TECHNICIAN NAME: Joe Fresh
LRUS SERIAL NUMBERS:
THALES VSB NUMBERS: C13204J-27-002; C13212J-27-002
THALES VSB TITLE: G500 FCC Software upgrade from JB01 (SW6.3) to KB02 (SW9.5)
Steps Process  Current Step Execution (FCC#1 Pilot Side)  Current Step Execution (FCC#2 Co-Pilot Side)
STATUS  Press "NEXT" to begin  Press "NEXT" to begin
MENDEMENT THALES 18X6
Upgrade file CRC verification
Module connection instructions execution
FCC power OFF/ON test
Modules original software verification test
Upgrade completion process on each Module
Final upgraded software verification
FCC power-down test
THALES  NEXT  FINISH
LSU process window
Figure 14
NOTE: In case the "Original Software Verification Mismatch" appears
(refer to Figure 15) then press "CONTINUE".
Original Software Verification Mismatch
Press CONTINUE or ABORT
CONTINUE  ABORT
Original Software Verification Mismatch
Figure 15
Date: SEP 09/2022  C13212J-27-002
Rev. : 01 - SEP 13/2022  Page: 15
© THALES AVS FRANCE SAS

### Page 60 (OCR)

THALES
Service Bulletin
C13212J
From the "Module Serial Number Verification" window (refer to Figure 16),
confirm the last 6 digits of the serial number of each module using the
associated check box then press "OK" when done.
ALRU Software Upgrade: G6033AAA11
FCC Module Serial Number Verification
M FCC 1 (Pilot Side)  I FCC 2 (Co-Pilot Side)
COM  MON  FAN  MON  COM  COM  MON  FAN  MON  COM
THALES  THALES  THALES  THALES  THALES  THALES
CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN  CONFIRM SN
C13212006624 C13212007565  C13204007754 C13204006114  C13212006858 C13212007553  C13204007154 C13204006655
THALES  OK  Cancel
Confirm Module Serial Number
Figure 16
NOTES: If at any point during the execution of this procedure, any step cannot
be passed or performed as instructed, contact GAC TECH OPS.
In the event of a communication issue: Press Cancel, check wire
connections and module power-on state and restart the process.
In the event of module hardware incompatibility: Ignore the identified
module, and then proceed with the other modules. Then select
appropriate Service Bulletin reference for the remaining module.
Date: SEP 09/2022  C13212J-27-002
Rev. : 01 - SEP 13/2022  Page: 16
© THALES AVS FRANCE SAS

The text continues at https://openairdocs.org/service-documents/gulfstream/asc-039a/file/9ad2a926168c.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
