# Honeywell Alert Service Bulletin 1152682-23-A22

Copy: Revision 1 ("U.S. DOT/FAA - ASB 1152682-23-A22, Revision 1"), 25 pages: PDF https://openairdocs.org/files/sha256/70/4b/704bbadf1fa6164433e74c88e0a583bc20c2720b590ab9452446fe3ac0a42d59; text https://openairdocs.org/service-documents/honeywell/1152682-23-a22/file/704bbadf1fa6.md. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2013-0707; AD 2013-18-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Honeywell](https://openairdocs.org/service-documents/honeywell.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 1152682-23-A22
- Latest revision known: 1152682-23-A22, Revision 1, dated August 8, 2013 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/honeywell/1152682-23-a22

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-17-02](https://openairdocs.org/ad/2014-17-02.md), effective Sep 9, 2014: Revision 1
- [AD 2013-18-09](https://openairdocs.org/ad/2013-18-09.md), effective Oct 3, 2013: Revision 1

## Text (25 pages)

Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2013-0707; AD 2013-18-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Honeywell ASCa Inc.
3333 Unity Drive
Mississauga, Ontario L5L 3S6
Canada
CAGE: 07217
T elephone: 800-601-3099 (T oll Free U.S.A./Canada)
T elephone: 602-365-3099 (International Direct)
Website: www.myaerospace.com
SERVICE BULLETIN
ALERT
COMMUNICATIONS - RESCU 406 (AF/AFN) EMERGENCY LOCATOR TRANSMITTER (ELT)
TRANSMITTER UNIT (TU) - Battery Installation Inspection and ReInstallation Instructions
Legal Noti ce
NOTICE: This is a CATEGORY 1, SAFETY alert service bulletin.
Export Control
This document contains technical data and is subjec t to Canadian and U.S. export regulations. If these
commodities, technology, or software were exported from Canada, no export permit is required. If these
commodities, technology, or software were exported from the United States, they are in accordance with the
export administration regulations. Diversion contrary to Canadian or U.S. law is prohibited.
ECCN: 9E991.
Proprietary Information
Honeywell - Confidential
THIS COP YRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL ASCa
INC., CONTAIN TRADE SECRETS AND MAY NOT , IN WHOLE OR IN PART , BE USED, DUPLICATED, OR
DISCLOSED FOR ANY PURPOSE WITHOUT PRIO R WRITTEN PERMISSION OF HONEYWELL ASCa
INC. ALL RIGHTS RESERVED.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 1 of 25
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 2

SERVICE BULLETIN
1152682
Honeywell Mat erials License Agreement
The documents and information contained herein (“the Materials”) are the proprietary data of Honeywell ASCa
Inc., and Honeywell Intellectual Properties Inc., (collectively “Honeywell”). These Materials are provided for the
exclusive use of Honeywell Service Centers; Honeywell-authorized repair facilities; operators of Honeywell
aerospace products subject to an applicable product support agreement, their wholly owned-subsidiaries or a
formally designated third party service provider; and direct recipients of Materials from Honeywell’s Aerospace
T echnical Publication Distribution. The terms and conditions of this License Agreement govern your use of
these Materials, except to the extent that any terms and conditions of another applicable agreement with
Honeywell regarding the operation, maintenance, or repair of Honeywell aerospace products conflict with the
terms and conditions of this License Agreement, in which case the terms and conditions of the other agreement
will govern. However, this License Agreement will govern in the event of a conflict between its terms and
conditions and those of a purchase order or acknowledgement.
1. License Grant - If you are a party to an applicable pro duct support agreement, a Honeywell Service Center
agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited, non-exclusive
license to use these Materials to operate, maintain, or repair Honeywell aerospace products only in accordance
with that agreement.
If you are a direct recipient of these Materials from Honeywell’s Aerospace T echnical Publication Distribution
and are not a party to an agreement related to the operation, maintenance or repair of Honeywell aerospace
products, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to maintain or
repair the subject Honeywell aerospace products only at the facility to which these Materials have been shipped
("the Licensed Facility"). Transfer of the Materials to another facility owned by you is permitted only if the
original Licensed Facility retains no copies of the Materials and you provide prior written notice to Honeywell.
2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are not
expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets. No license
to use any Honeywell trademarks or patents is granted under this License Agreement.
3. Confidentiality - You acknowledge that these Materials contain information that is confidential and proprietary
to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of thes e Materials.
4. Assignment And Transfer - This License Agreement may be assigned to a formally designated service
designee or transferred to a subsequent owner or operator of an aircraft containing the subject Honeywell
aerospace products. However, the recipient of any s uch assignment or transfer must assume all of your
obligations under this License Agreement. No assignment or transfer shall relieve any party of any obligation
that such party then has hereunder.
5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not make or
permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies of only portions
of the Material for your internal use. You agree to return the Materials and any copies thereof to Honeywell
upon the request of Honeywell.
6. T erm - This License Agreement is effective until terminated as set forth herein. This License Agreement
will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this
License Agreement or will terminate simultaneously with the termination or expiration of your applicable
product support agreement, authorized repair facility agreement, or your formal designation as a third party
service provider. Upon termination of this License Ag reement, you will return these Materials to Honeywell
without retaining any copies and will have one of your authorized officers certify that all Materials have been
returned with no copies retained.
7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from a
breach of this License Agreement.
8. Limitation of Liability - Honeywell does not make any representation regarding the use or sufficiency of the
Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED
OR STATUTORY , INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISI NG FROM COURSE OF
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 2
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 3

SERVICE BULLETIN
1152682
PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii)
WARRANTIES AGAINST INFRINGEMENT OF INTEL LECTUAL PROPERTY RIGHTS OF THIRD PARTIES,
EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT . IN NO EVENT WILL
HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL
DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE,
EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY
APPLICABLE L AW, THESE LIMITATIONS AND EXCLUSIONS WILL APPLY REGARDLESS OF WHETHER
LIABILITY ARISES FROM BREACH OF CONTRACT , WARRANTY , TORT (INCLUDING BUT NOT LIMITED
TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.
9. Controlling Law - This License shall be governed and construed in accordance with the laws of the State of
New York without regard to the conflicts of laws provisions thereof. This license sets forth the entire agreement
between you and Honeywell and may only be modified by a writing duly executed by the duly authorized
representatives of the parties.
Safety Advisory
WARNING: BE FORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE
HANDLING, STORAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER OR
SUPPLIER. FAILURE TO OBEY THE MANUFACTURERS’ OR SUPPLIERS’ RECOMMENDATIONS CAN
RESULT IN P ERSONAL INJURY OR DISEASE.
This publication describes physical and chemical processes which can make it necessary to use chemicals,
solvents, paints, and other commercially available materials. The user of this publication must get the Material
Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the materials to
be used. The user must know the manufacturer/ supplier data and obey the procedures, recommendations,
warnings and cautions set forth for the safe use, handling, storage, and disposal of the materials.
Warranty/Liability Advisory
WARNING: HONEYWELL ASSUMES NO RESPONSI BILITY FOR ANY HONEYWELL EQUIPMENT
WHICH IS N OT MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL’S PUBLISHED
INSTRUCTIONS AND/OR HONEYWELL’S FAA/SFA R 36 REPAIR AUTHORIZATION. NEITHER DOES
HONEYWELL ASSUME RESPONSIBILITY FOR SPECI AL TOOLS AND TEST EQUIPMENT FABRICATED
BY COMPAN IES OTHER THAN HONEYWELL.
WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR DECREASE
T H EL I F EOF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING OR TEST
EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT COMPONENTS OR GIVE UNSATISFACTORY
RESULTS.
Copyright - Notice
Copyright 2013 Honeywell ASCa Inc. All rights reserved.
Honeywell is a registered trademark of Honeywell ASCa Inc.
All other marks are owned by their respective companies.
THIS IS T HE SB FOSI - DA TE: 20121114
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 3
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 4

SERVICE BULLETIN
1152682
Transmittal I nformation
ATA Number 1152682-23-A22 (Publication Number D201307000054)
Summary
This revision is a FULL replacement. This revision includes the changes that follow:
• Added the instructions for battery removal, shipping, and disposal.
• Revised the instructions for return to service.
Revision History
This alert service bulletin has had one revision as shown in T able 1.
Table 1. Revision History
Revision Number Revision Date
0 1 Aug 2013
1 8 Aug 2013
Highlights
This section transmits Revision 1 to Service Bulletin, ATA Number 1152682-23-A22 (Pub Number
D201307000054), and contains these changes:
The list of highlights tells the users about the changes that the revision makes. The list has three columns. The
"Page" column shows the block of data that the revision changes and the page on which the block begins.
The block can be a section, subsection, graphic, table, etc. Revision marks give the location of the change in
the block. The "Description" column tells the user about the change or changes in each block. A paragraph,
table, or figure reference often comes before the description. The "Effectivity" column tells the user about
the part number(s) to which the block of information applies. The default value for this column is "All." "All"
means that the block applies to all parts.
Page Description Effectivity
7 Paragraph 1.A.(1). Added the information about manufacturer’s instructions to
this paragraph.
All
7 Paragraph 1.A.(1). Changed the serial number format in the NOTE following
this paragraph.
All
7 Paragraph 1.D.(1). Added the reference to Paragraph 4 in this paragraph. All
7 Paragraph 1.D.(1). Deleted the re ference to IPC/WHMA-A-620B Class 3
“Requirements and Acceptance for Cable and Wire Harness Assemblies” in
the last sentence of this paragraph.
All
8 Paragraph 1.E.(2). Added the information in this paragraph about previously
inspected units.
All
8 Paragraph 1.K.(1).(a). Added the statement in this paragraph referencing the
Honeywell Publications table.
All
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 4
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 5

SERVICE BULLETIN
1152682
Page Description Effectivity
8 Paragraph 1.K.(1).(a). Changed the temporary revision number in the Honeywell
Publications table from TR 23-1 to TR 23-2.
All
8 Paragraph 1.K.(2). Added the statement in this paragraph referencing other
documents.
All
8 Paragraph 1.K.(3). Deleted the reference to IPC/WHMA-A-620B Class 3
“Requirements and Acceptance for Cable and Wire Harness Assemblies” in
this paragraph.
All
11 Paragraph 2.E.(1). Changed the revision number of this alert service bulletin
from 0 to 1.
All
12 Paragraph 3.A.(1). Added the information in this paragraph. All
12 Paragraph 3.A.(2). Added the last sentence about references in this paragraph. All
13 Paragraph 3.C.(1). Added the information for removal of the battery from the
TU to this paragraph.
All
15 Paragraph 3.C.(4). Changed the information about disposal of the battery pack All
15 Paragraph 3.C.(4). Added address for returned battery packs. All
16 Paragraph 3.C.(5). Added the information about shipping the battery pack to
this paragraph.
All
20 Paragraph 3.F .(2). Changed the revision number of this alert service bulletin
from 0 to 1.
All
21 Paragraph 3.G. Revised the instructions for applicable Return to Service. All
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 5
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 6

SERVICE BULLETIN
1152682
Blank Page
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 6
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 7

SERVICE BULLETIN
1152682
1. P lanning Information
A. Effectivity
(1) This alert service bulletin is applicable to PNs 1152682-1, 1152682-2, and 1152682-3
given in T able 2, with serial numbers prior to 1152682-06131 with the exception of
transmitter units (TUs) that have been ink marked with Manufacturer’s Instructions
“13C0343 Rev C” on the underside of the unit and/or Manufacturer’s Instructions
“13C0343 Rev D” (or subsequent) adjacent to the battery expiry label. These
manufacturer’s inspection instructions may continue to be marked on units with serial
numbers after 1152682-06131 as well.
NOTE: Honeywell has used a different serial number format in the past which looks
like this: xxxC-xxx. All serial numbers that are of this format precede SN
1152682-06131, and are affected by this alert service bulletin.
Table 2. Applicable Component(s)
PN Equipment Designator
1152682-1 RESCU 406 (AF) TU
1152682-2 RESCU 406 (AFN) TU
1152682-3 RESCU 406 (AFN) TU
B. Concurrent Requirements
(1) Not applicable.
C. Reason
(1) There is potential for the battery wires to be pinched under the batt ery cover of the
TUs listed in T able 2.
(2) This alert service bulletin provides instructions to inspect the battery and associated
wiring, and correct this potential anomaly.
D. Description
(1) The TUs have effective built-in protection against the effects associated with electrical
short circuit from a potentially pinched wire. However, if the potential pinched wire
damage is severe enough, it may degrade the operation of the TU. This alert service
bulletin provides inspection criteria in Paragraph 4 for pinched or damaged battery
leads on both the battery and on the TU side of the battery lead connector.
(2) This procedure also inspects for any damage to the battery itself.
(3) This procedure also inspects for any damage to the battery cover gasket which may
prevent it from forming a water-tight seal around the battery compartment.
E. Compliance
(1) Operators are strongly encouraged to inspect and correct affected RESCU 406
AF/AFN TUs using the instructions provided in this alert service bulletin at the next
possible access to the TU.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 7
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 8

SERVICE BULLETIN
1152682
(2) Units previously inspected and marked with “SB 1152682-23-A22 Rev. 0” are also
in compliance with this Revision 1 of this alert service bulletin and do not need to
be re-inspected.
(3) Additional compliance direction may be directed by regulatory agencies.
F . Approval
(1) This alert service bulletin has been reviewed and approved by Transport Canada
Civil Aviation (TCCA).
(2) Courtesy copies provided to affected aircraft OEMs.
G. Manpower
(1) The time estimate to do this alert service bulletin is 0.25 manhour(s).
NOTE: The manhours estimate does not include the time to access the TU and
remove the unit from the ai rcraft, and then to reinst all it into the aircraft.
H. Weight and Balance
(1) None.
I. Electrical Load Data
(1) Not changed.
J. Software Accomplishment Summary
(1) Not applicable.
K. References
(1) Publications.
(a) The Honeywell publications that support this product are given in T able 3.
Table 3. Honeywell Publications
Component Maintenance Manual (CMM)
Outline PN ATA Number
1152682-1 23-24-01 with temporary revision (TR) 23-2
1152682-2, -3 23-24-02 with TR 23-2
1152682-2 23-24-04 1 with TR 23-2
NOTE:
1. Applicable to model B-787 only.
NOTE: Unless specified differently, you can use subsequent revisions.
(2) Other documents that support this product in service include the applicable aircraft
maintenance manual (AMM) or equivalent platform application documentation.
(3) Deleted.
L. Other Publications Affected
(1) The same as the publication(s) given in Paragraph 1.K.(1).
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 8
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 9

SERVICE BULLETIN
1152682
M. Interchangeability or Intermixability of Parts
(1) This alert service bulletin does not have an effect on interchangeability or intermixability
at the aircraft level.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 9
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 10

SERVICE BULLETIN
1152682
2. M aterial Information
A. Material - Price and Availability
(1) If a TU is checked and found to require more than just battery and/or battery cover
replacement, then it should be returned to Honeywell for repair.
(2) A very limited number of exchange units may be available to prevent aircraft on ground
(AOG) situations. Operators are requested to perform inspections at their facilities
and only return TUs that require more than battery and/or battery cover replacement
(post inspection). Operators are also requested to utilize their existing spares and
allowable minimum equipment list (MEL) provisions prior to making a request for an
exchange TU. Exchange TUs will be issued subject to an urgent AOG priority and
stock availability basis.
(3) If battery replacement is found to be required per this procedure, then the cost of a
replacement battery will be waived during the free of charge period (refer to Paragraph
2.A.(4)), after which the cost may be covered by original battery warranty or prorated
over the expected battery life.
(4) The time required to perform the inspections (up to the limit listed in Paragraph
1.G.), battery replacements due to failed inspections, and repairs to units returned
due to failed inspections contained in this alert service bulletin performed through
December 31, 2013, will be reimbursed and/or provided free of charge. Field actions
performed from January 1, 2014 onward will be subject to existing warranty and
chargeability/pricing.
B. Industry Support Information
(1) For replacement batteries and/or repair and recertification inquiries, please contact:
Honeywell ASCa Inc.,
Customer and Product Support, Customer Support Operations
3333 Unity Drive
Mississauga, Ontario
Canada L5L 3S6
T elephone: 800-601-3099 (T oll Free U.S.A./Canada)
T elephone: 602-365-3099 (International)
E-mail: AeroR&OAvionics@honeywell.com
Web: www.myaerospace.com
(2) For orders or quotations of new units or replacement batteries, please contact:
Honeywell ASCa Inc.,
Customer Support Operations
T elephone: 800-601-3099 (T oll Free U.S.A./Canada)
T elephone: 602-365-3099 (International)
Fax: 602-365-3343
E-mail: orders@honeywell.com
E-mail: quotes@honeywell.com
Web: www.myaerospace.com
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 10
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 11

SERVICE BULLETIN
1152682
(3) For technical inquiries regarding the TU, please contact:
Honeywell Aerospace Inc.,
T echnical Operations Center
T elephone: 800-601-3099 (T oll Free U.S.A./Canada)
T elephone: 602-365-3099 (International)
Fax: 602-365-3343
E-mail: AeroT echSupport@honeywell.com
Web: www.myaerospace.com
C. Material Necessary for Each Component
(1) Material(s) supplied by operator is/are given in T able 4.
NOTE: The materials given in T able 4 are the consumable products required for
completion of this alert service bulletin.
Table 4. Materials
Number Description Source
NOTE: You can use equivalent alternative materials unless specified differently. The user must find
equivalent alternatives.
Loctite-242 retaining co mpound CAGE: 05972
isopropyl alcohol (FS TT-I-735) Commercially available
D. Mat erial Necessary for Each Spare
(1) The consumable materials necessary to do this alert service bulletin for each spare
TU are the same as for the in-service TU. Refer to T able 4 in Paragraph 2.C. for
consumable materials.
E. Reidentified Parts
(1) TUs which have been inspected and/or serviced by an operator using the instructions
provided in Paragraph 3 of this alert service bulletin should be marked with the text “SB
1152682-23-A22 Rev 1” in the location shown in Figure 12. Refer to Paragraph 3.F .
(2) TUs which have been inspected and/or serviced by Honeywell will be identified by
placing a label in the location shown in Figure 13. Refer to Paragraph 3.F .
F . Tooling - Price and Availability
(1) Refer to T able 5 for price and availability of tooling.
Table 5. Tooling - Price and Availability
PN Keyword/Nomenclature Availability
NA T orque wrench (0-50 in-lbs) Commercially available
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 11
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 12

SERVICE BULLETIN
1152682
3. A ccomplishment Instructions
A. General Information
(1) The accomplishment instructions and inspection criteria required to complete the
inspection of affected TUs are contained in Paragraph 3 and Paragraph 4 of this
alert service bulletin.
(2) The manuals given in Paragraph 1.K. of this alert service bulletin contain the
disassembly, cleaning, check, assembly, and test instructions. These manuals are for
reference only and are not required to complete the inspection and re-identification of
TUs affected by this alert service bulletin.
B. Inspection of Battery Cover for Evidence of Improper Battery Wire Installation
(1) Make sure the toggle switch on the face of the TU is set to “OFF” position.
(2) Visually inspect the battery cover (no measurement required) looking for bulges or
gaps in the cover which indicate that wire(s) have been improperly installed under the
cover. Refer to Figure 1 and Figure 2.
Figure 1. (Sheet 1 of 1) Improper Installation with Wires Under Battery Cover
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 12
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 13

SERVICE BULLETIN
1152682
Figure 2. (Sheet 1 of 1) Close Up View of Improper Installation with Wires Under Battery Cover
(3) A proper installation will have a uniform gap all the way around the cover. Refer
to Figure 3.
Figure 3. (Sheet 1 of 1) Proper Battery Cover Installation
(4) Reject the TU if any cover deformation (gaps or bulges) is identified. Return TU to
Honeywell for repair. Refer to Paragraph 2.B.(1) for contact information.
C. Removal and Inspection of Battery
(1) Remove the battery from the TU, PN 1152682-1, -2, or -3, as follows:
(a) Remove the TU from the aircraft. Refer to the applicable aircraft maintenance
manual (AMM) or equivalent platform application documentation.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 13
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 14

SERVICE BULLETIN
1152682
(b) Remove eight screws securing the battery pack cover to the TU and remove
the cover.
NOTE: Retain the screws for reinstallation of battery cover.
CAUTION: GRASP BOTH ENDS OF THE BATTERY PACK CONNECTOR
TO PULL APART . DO NOT PULL ON CONNECTOR WIRES TO
DISCONNECT BATTERY PACK CONNECTOR.
(c) Disconnect battery pack connector.
(d) Unfold battery pack pull-tabs and remove battery pack by pulling tabs
straight up.
(2) Inspect the battery looking for damage to the black protective cover. Refer to Figure 4.
Figure 4 . (Sheet 1 of 1) Battery Protective Cover Inspection
(3) Inspect the battery for any damage to the wires or insulation. Refer to Figure 5
and Figure 6.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 14
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 15

SERVICE BULLETIN
1152682
Figure 5. (Sheet 1 of 1) B attery Wire Inspection
Figure 6. (Sheet 1 of 1) Detailed Battery Wire Inspection Location
(4) Reject the battery if any damage to either the black protective cover or if the wires are
identified to be beyond the limits of the inspection criteria provided in Paragraph 4
of this alert service bulletin. Return the rejected battery pack to Honeywell per the
return address below:
Honeywell ASCa Inc. (Aerospace-T oronto)
Attn: Nancy Elsayed, P . Eng.
3333 Unity Drive
Mississauga, Otario
Canada L5L 3S6
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 15
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 16

SERVICE BULLETIN
1152682
(5) The battery pack used in the TU is safe for transport in bulk by itself as well as installed
in the TU on passenger aircraft in accordance with exemption 173.185 (part c) of the
Federal Department of Transportation Title 49 Code of Regulations (CFR).
D. Inspection of TU Battery Connection Wires and Battery Cover Gasketing
(1) Inspect the TU battery connection wires looking for any indication of damage. Damage
could include flattening or exposed wires due to tears in insulation. Refer to Figure
7, Figure 8, and Paragraph 4.
Figure 7. (Sheet 1 of 1) TU Wire Inspection
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 16
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 17

SERVICE BULLETIN
1152682
Figure 8. (Sheet 1 of 1) Damaged TU Wires (Flattening Due to Pinching From Cover)
(2) Reject th e TU if any damage to the wires is identified to be beyond the limits of the
inspection criteria provided in Paragraph 4 of this alert service bulletin. Return the TU
to Honeywell for repair. Refer to Paragraph 2.B.(1) for contact information.
(3) Inspect the gasket of the battery cover, PN 1096856-1, to make sure that it would form
a water-t ight seal around the battery compartment. Refer to Figure 9. The gasket may
be slightly compressed where it was in contact with the TU’s surface. This uniform
compression is expected and is acceptable. However, the battery cover should be
rejected if the gasket shows any sign of deformation or indentation caused by the
wires or the blue pull-tabs having been trapped between the cover and the TU which
might compromise the water-tight seal around the battery compartment.
NOTE: The light gray cushioning material in the center of the battery cover is not
included in the inspection, and is expected to contain indentations from the
battery harness and battery pack.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 17
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 18

SERVICE BULLETIN
1152682
Figure 9. (Sheet 1 of 1) Example of Damaged Battery Cover Gasket Material From Battery Leads or
Battery Pull Straps
E. Battery and Cover Installation
(1) If the battery pack was not damaged in Paragraph 3.C. and does not require
replacement, go to Paragraph 3.E.(3) below.
(2) If the battery pack requires replacement, proceed as follows:
(a) Print or write the new battery expiration date on a Brady label, PN PTL-29-428,
or simila r waterproof label with an adhesive backing.
(b) Affix th e new label to the battery expiration section of the TU identification label.
(3) Install t he existing or new lithium battery pack in the battery compartment as follows:
(a) While hol ding the transmitter battery pack connector out of the way, feed the
battery and TU wires through the blue pull-tabs.
(b) Connect the battery pack connector to the TU connector.
(c) Verify that the wires are in the battery compartment. Refer to Figure 10.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 18
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 19

SERVICE BULLETIN
1152682
Figure 10. (Sheet 1 of 1) Verification that Wires are Within the Battery Compartment
(d) Place the battery cover on the chassis and be careful to make sure that all
wires are inside the TU and make sure that the blue pull-tabs are properly
folded before pushing it down. Refer to Figure 11.
Figure 11. (Sheet 1 of 1) Verification That Blue Pull-Tabs are in Correct Position When Installing the
Cover
(e) Add a small amount of Loctite-242 to the screws.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 19
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 20

SERVICE BULLETIN
1152682
(f) Attach cover with 8 screws that were retained during the cover removal using
a Phillips #2 screw driver. Starting with the 4 center position screws, torque
screws to 9.6 inch-pounds (1.08 Nm).
(4) Repeat cover inspection as outlined in Paragraph 3.B.
F . Identificati on that Inspection and/or Battery Replacement Completed
(1) Remove fingerprints, grease, and/or other contaminants from the location shown in
Figure 12 using isopropyl alcohol, and dry using a clean lint-free cloth.
(2) TUs which have been inspected and/or serviced by an operator using the instructions
provided in Paragraph 3 of this alert service bulletin should be marked with the text
“SB 1152682-23-A22 Rev 1” using indelible ink in the location shown in Figure 12.
Alternatively, operators may use Brady label, PN PTL-29-428, or a similar waterproof
label with adhesive backing.
Figure 12. (Sheet 1 of 1) Location of Marking on Units Inspected and/or Serviced by Operator
(3) TUs which have been inspected and/or serviced by Honeywell will be identified by
placing the label shown in Figure 13 in the location shown in Figure 12.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 20
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 21 (OCR)

Honeywell
SERVICE BULLETIN
1152682
RESCU  406AFN
UTOMATIC FIXED EMERGENCY LOCATOR TRANSMITTER (ELT)
MFR 07217  DMF 012013
SER 1152682-05864
PNR 1152682-2 SERIES 4
IC: 2094A-47105
EASA ETSO-2C91a, ETSO-2C126
PROTOCOL: SUP-SN  ITHIUM BATTERY 5.M20HR  SB 1152682- 23- A22 REV #
A/C: N/A  Honeywell Part # 1096801-1
ID: A78C4 05BA0 002AD  Expiry Date (MO/YR): 12/24
TYPE DESIGNATOR: AUTOMATIC FIXED (AF)  WEIGHT: 2.80 KG MAX
OPERATING FREQUENCIES 121.5 MHz, 243 MHz, 406.028 MHz
TSO-C91a AND TSO-C126 RTCA/DO-160E ENV CAT: D1BAXXXWXXXXXZAZAGTLXXXAX
FORWARD
CANADA
COSPAS-SARSAT TYPE APPROVED  APPROVAL NO.: 171
NOTICE
IT IS IMPERATIVE THAT THE OWNER OF THIS 406.028 MHZ ELT REGISTER THE
IDENTIFICATION CODE CONTAINED ON THIS LABEL WITH THE NATIONAL
AUTHORITY IN  CANADA  D-448862
LREGISTRATION OF 406 MH: BEACONS
Figure 13. (Sheet 1 of 1) Label Placed on Units Inspected and/or Serviced by Honeywell
G.  Return to Service
(1)  For units inspected in the field and reinstalled on the aircraft, perform the applicable
return to service (or maintenance operational check) specified by the applicable
aircraft maintenance manual (AMM) or equivalent platform application documentation.
(2)  For spare units not installed on aircraft, no additional testing is required.
(3)  Units returned to service centers will have current applicable acceptance tests
performed prior to return to customers.
1 Aug 2013  1152682-23-A22
Revision 1, 8 Aug 2013  Page 21
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 22

SERVICE BULLETIN
1152682
4. I nspection Criteria
A. Appendix A, Wire Insulation Damage
(1) Coatings added over insulation base material such as resin coatings over polyimide
are not considered to be part of the insulation and these criteria are not intended to be
applicable to those coatings.
(2) The cut ends of some insulation materials, particularly those with a fiberglass barrier,
may show fraying. Acceptability of this fraying should be agreed upon between the
user and manufacturer.
(3) These criteria are also applicable to post-assembly acceptance.
(a) Insulation Inspection
• Insulation has been trimmed neatly with no signs of pinching, pulling,
fraying, dis coloration, charring or burning. Refer to Figure 14.
Figure 14. (Sheet 1 of 1) Example of Target Insulation
(b) Acceptable Criteria
• A slight, uniform impression in the insulation from the gripping of
mechanical strippers.
• Chemical solutions, paste, and creams used to strip solid wires do not
cause degradation to the wire.
• Slight discoloration of insulation resulting from thermal processing is
permissible, provided it is not charred, cracked or split. Refer to Figure 15.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 22
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 23

SERVICE BULLETIN
1152682
Figure 15. (Sheet 1 of 1) Example of Acceptable Insulation
(c) Defect/Reject Criteria
• Any cuts, breaks, cracks or splits in insulation (not shown).
• Insulation thickness is reduced by more than 20 percent. Refer to Figure
16 and Figure 17.
• Uneven or ragged pieces of insulation (frays, tails, and tags) are greater
than 50 percent of the insulation outside diameter or 0.039 inch (1 mm),
whichever is more. Refer to Figure 18.
• Insulation is charred. Refer to Figure 19.
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 23
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 24

SERVICE BULLETIN
1152682
Figure 16. (Sheet 1 of 1) Example of Reduced Insulation Thickness
Figure 17. (Sheet 1 of 1) Example of Reduced Insulation Thickness
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 24
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

### Page 25

SERVICE BULLETIN
1152682
Figure 18. (Sheet 1 of 1) Example of Uneven Pieces of Insulation
Figure 19. (Sheet 1 of 1) Example of Charred Insulation
1 Aug 2013 1152682-23-A22
Revision 1, 8 Aug 2013 Page 25
Publication Number D201307000054
© Honeywell ASCa Inc. Do not copy without express permission of Honeywell.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
