# Honeywell Service Bulletin AS907-72-9067

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("AS907-72-9067 R0"), 14 pages: PDF https://openairdocs.org/files/sha256/76/17/761767dd702585a1200101d0bb245419ae25f8389724bad70d17a5ff93f57c36; text https://openairdocs.org/service-documents/honeywell/as907-72-9067/file/761767dd7025.md. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2017-0034; AD 2017-20-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("AS907-72-9067 R1"), 16 pages: PDF https://openairdocs.org/files/sha256/53/5f/535f9481a7e234b1e40e2b85ace54211594cebdd282dfc6e8ea9596a4f87b3b3; text https://openairdocs.org/service-documents/honeywell/as907-72-9067/file/535f9481a7e2.md. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2017-0034; AD 2017-20-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("Honeywell AS907-72-9067 R1"), 16 pages: PDF https://openairdocs.org/files/sha256/9b/fd/9bfd92a1813b0f6a171d9e292e1b0c9426300fa62ea33d212552af6adb0cef18; text https://openairdocs.org/service-documents/honeywell/as907-72-9067/file/9bfd92a1813b.md. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2017-1116; AD 2018-21-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Honeywell](https://openairdocs.org/service-documents/honeywell.md)
- Type: Service bulletin (Service Bulletin)
- Number: AS907-72-9067
- Latest revision known: AS907-72-9067, Revision 1, dated March 20, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/honeywell/as907-72-9067

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-21-01](https://openairdocs.org/ad/2018-21-01.md), effective Nov 19, 2018: Revision 1
- [AD 2017-20-06](https://openairdocs.org/ad/2017-20-06.md), effective Nov 9, 2017: Revision 1

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/honeywell/as907-72-9067/proposed.md).

## Text (14 pages)

Revision 1, the newest copy. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2017-0034; AD 2017-20-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Honeywell International Inc.
1 1 1S .3 4 t hS t r e e t
Phoenix, Arizona 85034-2802
U.S.A.
CAGE: 99193
T elephone: 800-601-3099 (T oll Free U.S.A./Canada)
T elephone: 602-365-3099 (International Direct)
Website: www.myaerospace.com
SERVICE BULLETIN
ENGINE - LP TURBINE SECTION - Inspect Second Stage Low Pressure Turbine (LPT2) Rotor Blades,
PN 3035602 -1, on AS907-1-1A Model Engines
Legal Notice
NOTICE: This is a CATEGORY 1, SAFETY service bulletin.
Export Control
This document contains technical data and is subject to U.S. export regulations. These commodities,
technology, or software were exported from the United States in accordance with the export administration
regulations. Diversion contrary to U.S. law is prohibited.
ECCN: 9E991.
Proprietary Information
Honeywell - Con ﬁdential
THIS DOCUMENT AND ALL INFORMATION AND EXPRESSION CONTAINED HEREIN ARE THE
PROPERTY OF HONEYWELL INTERNATIONAL INC., ARE PROVIDED IN CONFIDENCE, AND MAY BE
USED BY PERSONS REQUIRED BY FEDERAL AVIAT ION REGULATION PART 21.50 TO COMPLY WITH
ANY OF THE TERMS OF THESE INSTRUCTIONS. EXCEPT AS SET FORTH ABOVE, NO PERSON MAY ,
IN WHOLE OR IN PART , USE, DUPLICATE OR DISCLOSE THIS INFORMATION FOR ANY PURPOSE
WITHOUT THE PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL INC.
Honeywell Materials License Agreement
The documents and information contained herein ("the Materials") are the proprietary data of Honeywell
International Inc. These Materials are provided for the exclusive use of Honeywell Service Centers;
Honeywell-authorized repair facilities; operators of Honeywell aerospace products subject to an applicable
product support agreement, their wholly owned-subsidia ries or a formally designated third party service
provider; and direct recipients of Materials from Honeywell's Aerospace T echnical Publication Distribution.
The terms and conditions of this License Agreement govern your use of these Materials, except to the extent
that any terms and conditions of another applicable agreement with Honeywell regarding the operation,
maintenance, or repair of Honeywell aerospace products con ﬂict with the terms and conditions of this License
Agreement, in which case the terms and conditions of the other agreement will govern. However, this License
Agreement will govern in the event of a con ﬂict between its terms and conditions and those of a purchase
order or acknowledgement.
1. License Grant - If you are a party to an applicable product support agreement, a Honeywell Service Center
agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited, non-exclusive
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 1 of 14
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 2

SERVICE BULLETIN
AS907
license to use these Materials to operate, maintain, or repair H oneywell aerospace products only in accordance
with that agreement.
If you are a direct recipient of these Materials from Honeywell’s Aerospace T echnical Publication Distribution
and are not a party to an agreement related to the operation, maintenance or repair of Honeywell aerospace
products, Honeywell hereby grants you a limited, non-exclusive license to use these Materials to maintain or
repair the subject Honeywell aerospace products only at the facility to which these Materials have been shipped
("the Licensed Facility"). Transfer of the Materials to another facility owned by you is permitted only if the
original Licensed Facility retains no copies of the Materials and you provide prior written notice to Honeywell.
2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are not
expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets. No license
to use any Honeywell trademarks or patents is granted under this License Agreement.
3. Con ﬁdentiality - You acknowledge that these Materials contain information that is con ﬁdential and proprietary
to Honeywell. You agree to take all reasonable efforts to maintain the con ﬁdentiality of these Materials.
4. Assignment And Transfer - This License Agreement may be assigned to a formally designated service
designee or transferred to a subsequent owner or operator of an aircraft containing the subject Honeywell
aerospace products. However, the recipient of any s uch assignment or transfer must assume all of your
obligations under this License Agreement. No assignment or transfer shall relieve any party of any obligation
that such party then has hereunder.
5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not make or
permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies of only portions
of the Material for your internal use. You agree to return the Materials and any copies thereof to Honeywell
upon the request of Honeywell.
6. T erm - This License Agreement is effective until terminated as set forth herein. This License Agreement
will terminate immediately, without notice from Honeywell, if you fail to comply with any provision of this
License Agreement or will terminate simultaneously with the termination or expiration of your applicable
product support agreement, authorized repair facility agreement, or your formal designation as a third party
service provider. Upon termination of this License Ag reement, you will return these Materials to Honeywell
without retaining any copies and will have one of your authorized of ﬁcers certify that all Materials have been
returned with no copies retained.
7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from a
breach of this License Agreement.
8. Limitation of Liability - Honeywell does not make any representation regarding the use or suf ﬁciency of the
Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED
OR STATUTORY , INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM COURSE OF
PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii)
WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES,
EVEN IF HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT . IN NO EVENT WILL
HONEYWELL BE LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL
DAMAGES, INDIRECT DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE,
EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, THESE LIMITATIONS AND EX CLUSIONS WILL APPLY REGARDLESS OF WHETHER
LIABILITY ARISES FROM BREACH OF CONTRACT , WARRANTY , TORT (INCLUDING BUT NOT LIMITED
TO NEGLIGENCE), BY OPERATION OF LAW, OR OTHERWISE.
9. Controlling Law - This License shall be governed and construed in accordance with the laws of the State of
New York without regard to the con ﬂicts of laws provisions thereof. This license sets forth the entire agreement
between you and Honeywell and may only be modi ﬁed by a writing duly executed by the duly authorized
representatives of the parties.
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 2
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 3

SERVICE BULLETIN
AS907
Safety Adviso ry
WARNING: BEFORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE
HANDLING, STO RAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER OR
SUPPLIER. FAILURE TO OBEY THE MANUFACTURERS' OR SUPPLIERS' RECOMMENDATIONS CAN
RESULT IN PERSONAL INJURY OR DISEASE.
This publication describes physical and chemical processes which can make it necessary to use chemicals,
solvents, paints, and other commercially available materials. The user of this publication must get the Material
Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the materials to
be used. The user must know the manufacturer/supplie r data and obey the procedures, recommendations,
warnings and cautions set forth for the safe use, handling, storage, and disposal of the materials.
Warranty/Liability Advisory
WARNING: HONEYWELL ASSUMES NO RESPONSI BILITY FOR ANY HONEYWELL EQUIPMENT
WHICH IS NOT MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL'S PUBLISHED
INSTRUCTIONS AND/OR HONEYWELL'S FAA/SFAR 36 REPAIR AUTHORIZATION. NEITHER DOES
HONEYWELL ASSUME RESPONSIBILITY FOR SPECI AL TOOLS AND TEST EQUIPMENT FABRICATED
BY COMPANIES OTHER THAN HONEYWELL.
WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR DECREASE
THE LIFE OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING OR TEST
EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT COMPONENTS OR GIVE UNSATISFACTORY
RESULTS.
Copyright - Notice
Copyright 2016 Honeywell International Inc. All rights reserved.
Honeywell is a registered trademark of Honeywell International Inc.
All other marks are owned by their respective companies.
THIS IS THE SB FOSI - DA TE: 20161 128
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 3
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 4

SERVICE BULLETIN
AS907
Transmittal I nformation
ATA Number AS9 07-72-9067 (Publication Number D201609000026)
Summary
This is the IN ITIAL release.
Refer to Par agraph 1.N. for a list of the acronyms and abbreviations used in this service bulletin.
Revision Hi story
This servic e bulletin has had no revision(s) as shown in T able 1.
Table 1. Re vision History
Revision Number Revision Date
0 12 Dec 2016
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 4
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 5

SERVICE BULLETIN
AS907
1. Planning Information
A. Effectivity
(1) This is a CATEGORY 1, SAFETY service bulletin.
NOTE: CATEGORY 1 service bulletins address safety issues. Typically, they
require urgent action and are often, but not always, referred to by an FAA
Airworthiness Directive. Category 1 service bulletins may be issued as
an ALERT service bulletin when immediate attention is required. ALERT
service bulletins are printed on light blue paper. The compliance schedule
stated in this service bulletin provides a reasonable reduction in risk while
minimizing engine downtime.
(2) This service bulletin is applicable to the turbofan aircraft engines shown in T able 2.
Table 2. Applicable Engine(s)
PN Model Number Serial Number 1 Application
3030001-4 AS907-1-1A ALL Bombardier BD-100-1A10
(Challenger 300)
NOTE:
1. Review engine log books to determine if the LPT2 rotor blades, PN 3035602-1, were replaced at or before
8,000 hours. If the LPT2 rotor blades, PN 3035602-1, have been replaced at or before 8,000 hours no
further action is required.
B. Concurrent Requirements
(1) Not applicable.
C. Reason
WARNING: FAILURE TO COMPL Y WITH THIS SERVICE BULLETIN COULD CAUSE
DISTRESS OF THE LOW PRESSURE TURBINE ASSEMBLY . IF LEFT
UNCORRECTED, T HIS DISTRESS COULD RESULT IN A SECOND STAGE
LOW PRESSURE TURBINE BLADE SEPARATION AND COMMESURATE
DAMAGE TO THE TURBINE SECTION OF THE ENGINE. SERIOUS INJURY
OR DEATH TO PER SONNEL AND DAMAGE TO THE AIRCRAFT COULD
OCCUR IF TURBINE BLADE SEPARATIONS WERE TO OCCUR ON BOTH
ENGINES DURING THE SAME FLIGHT .
(1) Background:
(a) There have been three failures of LPT2 rotor blades. The failures caused the
engine(s) to be pulled back to ﬂight idle because of high vibration. The failures
did not result in in- ﬂight shutdowns.
(2) Action:
(a) Inspect LPT2 rotor blades, PN 3035602-1, which have greater than 8,000
hours in service.
D. Description
(1) This service bulletin provides instructions to borescope inspect the LPT2 rotor blades
w h i c hh a v em o r et h a n8 , 0 0 0h o u r st i m ei ns e r v i c e .
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 5
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 6

SERVICE BULLETIN
AS907
E. Compliance
(1) Compliance addresses a safety issue.
(2) Honeywell recommends that this service bulletin be accomplished within 400 engine
operating hours from the initial issue date of this service bulletin (Revision 0).
(3) Maintenance activities should be coordinated as necessary in the event the borescope
inspection indicates LPT2 rotor blade replacement is required.
F . Approval
(1) The accomplishment instructions are FAA approved.
G. Manpower
(1) An estimated 15.0 man-hour(s) is/are required to borescope inspect the LPT2 rotor
blades.
(2) If required, an estimated 30.0 man-hour(s) is/are required to replace the LPT2 rotor
assembly if completed on-wing. An estimated 25.0 man-hours(s) is/are required if
engine has been removed from aircraft.
(3) The borescope inspection of the LPT2 rotor blades may be accomplished at a Line
Service Center level or greater.
(4) The replacement of the LPT2 rotor assembly may be accomplished at a Minor Service
Center level or greater.
H. Weight and Balance
(1) None.
I. Electrical Load Data
(1) Not applicable.
J. Software Accomplishment Summary
(1) Not applicable.
K. References
(1) The sources of information used in the preparation of this service bulletin include
Honeywell engineering documentation and the documents listed in T able 3.
Table 3. Sources of Information
Part/Model Number
Heavy Maintenance
Manual
Light Maintenance
Manual 1
Illustrated Parts
Catalog 1
AS907-1-1A 72-05-13 72-05-12 72-05-11
NOTE:
1. Affected Chapter/Section/Subject 72-55-02 and 72-55-03.
(2) Refer to the following tasks in the engine LMM to borescope inspect the LPT2 rotor
blades.
• Subtask 72-00-00-200-018 Inspection/Check
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 6
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 7

SERVICE BULLETIN
AS907
• T ask 72-55-03-200-801 Inspection/Check
• Subtask 72-55-03-200-006 Inspection/Check.
L. Other Publications Affected
(1) Same as those listed under Paragraph 1.K.(1).
M. Interchang eability or Intermixability of Parts
(1) Not applicable.
N. Acronyms and Abbreviations
(1) Refer to T able 4 for a list of the acronyms and abbreviations used in this service bulletin.
Table 4. List of Acronyms and Abbreviations
Term Full Term
ATA Air Transport Association
CAGE commercial and government entity
ECCN Export Control Classi ﬁcation Number
FAA Federal Aviation Administration
LMM light maintenance manual
LP low pressure
LPT2 second stage low pressure turbine
MSP Maintenance Service Program
OSHA Occupational Safety and Health Administration
PN part number
Rev. revision
SFAR Special Federal Aviation Regulation
TSN time since new
TSO time since overhaul
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 7
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 8

SERVICE BULLETIN
AS907
2. Material Information
A. Material - Price and Availability
(1) Information regarding price and availability of parts may be obtained from Honeywell,
Aerospace Contact T eam, T elephone: 800-601-3099 (T oll Free U.S.A./Canada),
602-365-3099 (International Direct).
B. Industry Support Information
(1) Send claims through the Honeywell MyAerospace web portal (www.myaerospace.com).
Select the Maintenance Plans tab and use the Claims-Maintenance Programs
sub-option.
(2) The warranty/program data is listed in T able 5.
NOTE: The procedures outlined in this service bulletin may be accomplished at the
Line Service Center level or greater.
Table 5. Warranty/Program Data
Warranty/Program Yes 12 No
Commercial Warranty
(Standard new engine warranty)
X
Spare Part Warranty
(Standard new spare part warranty)
X
Special Extended Warranty Program Number
(Extension of either standard commercial warranty or spare part warranty may apply)
X
Special Program Number
(Programs in which special pricing and/or special conditions may apply)
X
Special Pricing Notice Number 2
(Reduction from catalog list pricing, i.e., “P” condition pricing may apply)
X
MSP X
NOTES:
1. The costs of compliance with this service bulletin may be covered by Warranty, MSP , or other Programs
marked with an “X” in the “Yes” column, subject to the terms and conditions of the applicable Warranty, MSP ,
or other Programs contracts. This service bulletin in no way alters, modi ﬁes, or extends the terms of any
Warranty, MSP , or other Programs contract. For clari ﬁcation or questions, contact Honeywell Warranty
Department at 800-601-3099, Domestic or 602-365-3099, International and select Option No. 2.
2. Send claims through the Honeywell MyAerospace web portal (www.myaerospace.com). Select the
Maintenance Plans tab and use the Claims-Maintenance Programs sub-option.
C. Materia l Necessary for Each Engine
(1) Not applicable.
D. Material Necessary for Each Spare
(1) Not applicable.
E. Reidenti ﬁed Parts
(1) Not applicable.
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 8
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 9

SERVICE BULLETIN
AS907
F . Tooling - Price and Availability
(1) No special tooling is required except that already listed in publications referenced in
Paragraph 1.K.(1).
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 9
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 10

SERVICE BULLETIN
AS907
3. Accomplishment Instructions
A. General Information
(1) Obey the precautions.
NOTE: Publications listed in Paragraph 1.K.(1) provide applicable disassembly, cleaning,
inspection, reassembly, and testing instr uctions and shall be referred to during the
accomplishment of the following instructions.
B. Inspect LPT2 Rotor Blades, PN 3035602-1, on AS907-1-1A Model Engines
(1) Using steps outlined in the engine LMM, do a borescope inspection of the LPT2 rotor
blades, PN 3035602-1. Inspect for wear on the LPT2 rotor blade shrouds Z gap
shrouds contact areas. Make a digital image record of the 62 LPT2 rotor blades, PN
3035602-1, and the blade shrouds Z gap contact areas shown in Figure 1 and Figure 2.
(2) Upon completion of engine reassembly, check and ensure proper engine operation in
accordance with the engine test instructions.
(3) Make an entry in the engine log book noting date of compliance, engine operating
time, part number(s) and serial number(s) of installed component(s) (as applicable),
and compliance with this service bulletin (and service bulletin revision number, if
applicable).
(4) Complete the Certi ﬁcate of Compliance form in Paragraph 4.A. and send to Honeywell.
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 10
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 11

SERVICE BULLETIN
AS907
Figure 1. (Sheet 1 of 1) Example of Borescope Inspection Measurement of the LPT2 Rotor Blade Z
Gap Contact Area Wear
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 11
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 12

SERVICE BULLETIN
AS907
Figure 2. (Sheet 1 of 1) Example of Borescope Inspection of the LPT2 Rotor Blade Z Gap Contact Area
with No Visible Wear
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 12
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 13 (OCR)

Honeywell
SERVICE BULLETIN
AS907
4.  Appendix
A.  Appendix A, Certificate of Compliance
To: Operator or Service Center Performing Modification
Upon modification of equipment, please fill in the information requested below, then mail or email the
completed Certificate of Compliance (refer to Figure 3) to:
Honeywell International Inc.
111 S 34th Street, Mail Stop 503-320
Phoenix, AZ 85034-2802
Email: engine.reliability@honeywel.com
Owner/Operator
Aircraft Model  Aircraft Serial Number
I certity that the following engine/equipment has been modified in accordance with the
listed service bulletins.
ENGINE/EQUIPMENT
NUMBER 1  NUMBER 2  NUMBER 3  NUMBER 4
PART NUMBER  PART NUMBER  PART NUMBER  PART NUMBER
MODEL NUMBER  MODEL NUMBER  MODEL NUMBER  MODEL NUMBER
SERIAL NUMBER  SERIAL NUMBER  SERIAL NUMBER  SERIAL NUMBER
TSN/TSO  TSN/TSO  TSN/TSO  TSN/TSO
CYCLES  CYCLES  CYCLES  CYCLES
SERVICE  SERVICE  SERVICE  SERVICE
BULLETIN  REV.  BULLETIN  REV.  BULLETIN  REV.  BULLETIN  REV.
NUMBER  NUMBER  NUMBER  NUMBER  NUMBER  NUMBER  NUMBER  NUMBER
NUMBER 1  NUMBER 2  NUMBER 3  NUMBER 4
Signature  Date  ID-306376
Repair Facility
Figure 3. (Sheet 1 of 1) Certificate of Compliance
12 Dec 2016  AS907-72-9067
Revision 0, 12 Dec 2016  Page 13
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

### Page 14

SERVICE BULLETIN
AS907
EMAIL TO
engine.reliability@honeywell.com
12 Dec 2016 AS907-72-9067
Revision 0, 12 Dec 2016 Page 14
Publication Number D201609000026
© Honeywell International Inc. Do not copy without express permission of Honeywell.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
