# AlliedSignal Service Bulletin T53-L-13B-0100

Copy: Revision 2 ("AlliedSignal Aerospace SB T53-L-13B-0100 Revision 2"), 7 pages: PDF https://openairdocs.org/files/sha256/e8/e4/e8e40f207a240ca5c9f6a372bb4cff621b7a703fe558a2adff210df231c4d597; text https://openairdocs.org/service-documents/honeywell/t53-l-13b0100/file/e8e40f207a24.md. Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2021-1185; AD 2022-10-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Honeywell](https://openairdocs.org/service-documents/honeywell.md) (issued as AlliedSignal)
- Type: Service bulletin (Service Bulletin)
- Number: T53-L-13B-0100
- Latest revision known: T53-L-13B-0100, Revision 2, dated May 11, 1999 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/honeywell/t53-l-13b0100

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-10-02](https://openairdocs.org/ad/2022-10-02.md), effective Jun 28, 2022: Revision 2

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/honeywell/t53-l-13b0100/proposed.md).

## Text (7 pages)

Rights: © Honeywell International Inc. Filed by the FAA in regulations.gov docket FAA-2021-1185; AD 2022-10-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Aerospace 
Honeywell International Inc. 
111 South 34th Street 
Phoenix, AZ 85034 
USA 
 
 
Date:  July 18, 2014 
To:  Holders of Technical Publication no.  T53-L-13B-0100 
 
Subject: Technical Publications Export Classification Declaration 
 
To Whom It May Concern, 
 
The purpose of this attachment is to formally communicate to holders of the subject document its United States’ export 
classification.  
 
Important: The following export classification hereby supersedes any previously assigned export classification found 
within the body of the Technical Publication. 
 
Publication Number: T53-L-13B-0100 
ATA Number: T53-L-13B-0100 
Document Export Classification: 9E991 
Document Title: ENGINE - GENERAL - INTRODUCTION OF A SPECIAL VIBRATION CHECK  
 
Note: The enclosed technical data is to be used solely by the individual or organization to whom it is addressed. 
Diversion contrary to U.S. export laws and regulations is prohibited. 
 
Background And Reason For New Export Declaration: 
 
Honeywell has historically included the export classification within the body of the technical publication. By doing so, 
changes to the document’s export classification required a formal revision to the document itself. This new Export 
Classification Declaration meets Honeywell’s legal obligation to communicate the document’s export classification to 
the recipient and allows for potential changes that will not require a formal document revision.

### Page 2 (OCR)

AlliedSignal  SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
REVISION TRANSMITTAL SHEET
This sheet transmits Revision 2 to Service Bulletin T53-L- 13B-0100, titled ENGINE - GENERAL -
INTRODUCTION OF A SPECIAL VIBRATION CHECK
This is a COMPLETE revision. This bulletin has been reprinted in its entirety. Please remove and discard all
pages of prior issues and replace with pages of this revision.
Reason for Revision: To update Service Bulletin with guidance for recurring inspection requirements.
Paragraph 1.E, added safety issue.
Paragraph 3.A. (2), added shimming requirements and added WARNING and NOTE.
Paragraph 3.B, revised recheck procedure.
List of Effective Pages:
Page No.  Date  Page No.  Date
May 11/99  4  May 11/99
2  May 11/99  5  May 11/99
May 11/99
Previous Revisions:
Revision 1  Mar 24/99
T53-L-13B-0100
May 11/99  Page 1 ot 1
Copyright 1999 AlliedSignal Inc.

### Page 3 (OCR)

IliedSignal  SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
Category 1: Safety
ENGINE - GENERAL - INTRODUCTION OF A SPECIAL VIBRATION CHECK
1. Planning Information
A. Effectivity
This Service Bulletin applies to the following gas turbine engines:
Part No.  Model No.  Serial No.  Application
1-000-060-10  T53-L-13B  ALL  Bell UH- 1 Series
1-000-060-17  T53-L- 13B S/SA  ALL  Augusta AB 205
1-000-060-22  T53-L-13B S/SB  ALL  Bell UH-1 Series
B. Concurrent Requirements
Does not apply.
C. Reason
(1) Problem: In U.S. Army aircraft, and aircraft supported by the U.S. Army, there have been several
failures of N2 Spur Gear Part No. 1-070-062-04.
(2) Background: AlliedSignal Engines is conducting an engineering investigation with the U.S. Army
to determine the cause of this failure mechanism. It has been determined that engines exhibiting
certain vibration characteristics can produce unacceptable stress in the spur gear that can result
in a spur gear failure.
(3) Action: Perform the special vibration check outlined in this Service Bulletin.
D. Description
This Service Bulletin offers a complete vibration analysis method to determine if the T53-L-13B
engine has vibration characteristics which have been associated with previous spur gear failures.
E. Compliance
Compliance addresses a safety issue. AlliedSignal recommends compliance with this Service Bulletin
for all T53 series engines. This Service Bulletin should be performed within 100 flight hours (not to ex-
ceed a 6 month time period) from the original issue date of this Service Bulletin for installed units. Per-
form as part of the installation procedures on all engines that are now uninstalled. If procedure has
been accomplished during engine test by an authorized service center and noted in the engine log-
book, this Service Bulletin does not need to be performed on engine installation.
F. Approval
The technical data in this Service Bulletin has been approved by AlliedSignal Engines.
May 5/98  T53-L-13B-0100
Revision 2, May 11/99  Page 1 of 5
Copyright 1998 AlliedSignal Inc.

### Page 4 (OCR)

IliedSignal  SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
G. Manpower
An estimated 4.0 manhours are necessary to perform this Service Bulletin.
H. Weight and Balance
No change.
Electrical Load Data
No change.
Software Accomplishment Summary
Does not apply.
K. References
The data used to prepare this Service Bulletin include AlliedSignal engineering documents and the
publications shown below:
(1)  Publications.
Engine  Maintenance  Illustrated Parts
Model No.  Manual No  Catalog No.
T53-L-13B  350.2  350.4
(2)  Service bulletin references.
None.
L. Other Publications Affected
Operational Information Letters (OIL) are issued to inform pilots and maintenance personnel of the
effect that an adverse maintenance condition will have on the engine and resulting effects to the aircraft.
OIL T53-01 was issued to address the effect of a N2 system disconnect caused by a spur gear failure.
All personnel involved with the T53-L- 13B engine should become familiar with this OIL.
M. Interchangeability or Intermixability of Parts
Does not apply.
2. Material Information
A. Material - Price and Availability
Does not apply.
B. Industry Support Information
Does not apply.
May 5/98  T53-L-13B-0100
Revision 2, May 11/99  Page 2

### Page 5 (OCR)

AlliedSignal SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
C. Material Necessary for Each Engine
Does not apply.
D. Material Necessary for Each Spare
Does not apply.
E. Reidentified Parts
Does not apply.
Tooling - Price and Availability
The special tools necessary to do this Service Bulletin are in the manuals shown in paragraph 1.K. (1)
and as follows:
(1)  Chadwick Helmuth 192 and 8500 series vibration analyzers have been tested and have been
able to detect the vibration of interest. When using this equipment the 7310 velocimeter,
Mounting Bracket Part No. LTCT535, and Cable Part No. 11210-20/-50 must be used.
If other equipment is used it must have the capability to measure the vibration at a frequency of O
to 5000 Hz. There cannot be any filters installed in either the velocimeter or vibration analyzer.
(3)  To purchase Chadwick Helmuth equipment, send Fax request to (626) 350-4236. One alternate
source of vibration equipment is Scientific Precision. For information concerning availability and
use of equipment to meet these requirements, contact: Dave Lilly, Phone (619) 679-6228, Fax
(4)  Refer questions on the ground support equipment to AlliedSignal Aerospace, Marketing, Sales &
Service, P.O. Box 52170, Phoenix, AZ 85072-2170, Fax (602) 231-2328.
(5)  Modification instructions for Bracket Part No LTCT535.
(a)  Locate the center of three existing accelerometer mounting holes.
(D)  Drill a 0.213 inch (No. 3 drill) through the bracket. Deburr holes.
Thread hole with a 0.250-28 tap. This hole is used to hold the accelerometer to the
bracket. It must hold the accelerometer flush on the bracket. Any deviation from this will
cause false information during the vibration check.
3.  Accomplishment Instructions
A. Perform Vibration Test of Engine
(1)  Follow vibration equipment manufacturer's instructions for the warm-up and installation of the
equipment.
(2)  There will be one pick-up installed at the No. 1 pick up location (lifting eye on top of the engine
inlet housing). Use mounting bracket LTCT535. The mounting bracket may require shimming to
secure it tightly.
May 5/98  T53-L-13B-0100
Revision 2, May 11/99  Page 3

### Page 6 (OCR)

IliedSignal  SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
WARNING: A LIMIT OF 0.2 IPS (INCHES PER SECOND) HAS BEEN ESTAB-
LISHED BY ALLIEDSIGNAL ENGINES FOR ANY PEAK WITHIN THE
RPM/FREQUENCY BANDS. IF THIS LIMIT IS EXCEEDED IN THE
225,000 TO 250,000 RANGE THE TEST MUST BE TERMINATED
AND THE ENGINE REMOVED FROM SERVICE.
NOTE:  Contact AlliedSignal Customer Support Engineering with any high
vibration data in the 200,000 to 225,000 or above the 250,000 ranges.
(3)  After the equipment is installed perform the vibration test using the parameters listed in Table 1.
Table 1. Vibration Test
Output Shaft  N2  N1  Rpm/Frequency
ud 0o29  %*6  90%  200,000 to 300,000
6400 грт  %L6  85%  200,000 to 300,000
6400 pm  97%  90%  200,000 to 300,000
6300 rpm  95.5%  95%  200,000 to 300,000
6400 rpm  97%  95%  200,000 to 300,000
6500 rpm  98.5%  95%  200,000 to 300,000
6400 грт  97%  MAX.  200,000 to 300,000
uds 0099  %O01  90%  200,000 to 300,000
THON
A recheck is required every 500 hours when Gear Part No. 1-070-062-04 and every 1000 hours
when Gear Part No. 1-070-062-06 is installed. A recheck is required whenever disassembly for
parts replacement is performed on the Reduction Gearbox Part No. 1-030-350-08/-09/- 12/
- 16.
C. Engines Passing Vibration Check
(1)  AlliedSignal recommends engines that pass this vibration check within the limit of 0.2 ips be
returned to service without flights restrictions.
(2)  Compliance with this Service Bulletin must be recorded in the Engine Logbook and the Service
Bulletin Compliance Records.
(3)  Complete and return the Notice of Service Bulletin Compliance (attached) to AlliedSignal
Engines.
May 5/98  T53-L-13B-0100
Revision 2, May 11/99  Page 4

### Page 7 (OCR)

AlliedSignal  SERVICE BULLETIN
AEROSPACE  AlliedSignal Engines
4. Appendix
Does not apply.
May 5/98  T53-L-13B-0100
Revision 2, May 11/99  Page 5

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
